cores
/
microwatt
mirror of https://github.com/antonblanchard/microwatt
3
1
Fork 1
Code Issues Projects Releases Wiki Activity
A tiny Open POWER ISA softcore written in VHDL 2008
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1,153 Commits
39 Branches
0 Tags
66 MiB
Verilog 81.8%
VHDL 14.3%
C 2.9%
Assembly 0.5%
Makefile 0.2%
Other 0.2%
 
 
 
 
 
 
master
caravel-mpw7-20221125
caravel-mpw7-20220822
branch-alias
trace-test
gitignore
litedram-update
liteeth-update
fix-sdcard
fpu-init
loadstore-init
core_debug-init
icache-unused-sig
icache-insn-u-state
dcache-unused-sig
unused-sig
divider-init
loadstore-pmu-init
icache-pmu-events
fpu-typo
less-fpga-init
caravel-mpw6-20220530
caravel-mpw5-20220323
caravel-mpw5-20220322
alt-reset-address
log2ceil-issue
fpu-constant
asic-3
boxarty-20211011
icbi-issue
orange-crab-freq
dcache-nc-fix
remove-potato-uart
cache-tlb-parameters-2
caravel-20210114
caravel-20210105
jtag-port-2
jtag-port
nia-debug
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '1d7de2f1da'
${ noResults }
Go to file
Paul Mackerras 1d7de2f1da register_file: Make read access to register file synchronous 
With this, the register RAM is read synchronously using the addresses
supplied by decode1.  That means the register RAM can now be block RAM
rather than LUT RAM.

Debug accesses are done via the B port on cycles when decode1
indicates that there is no valid instruction or the instruction
doesn't use a [F]RB operand.

We latch the addresses being read in each cycle and use the same
address next cycle if stalled.  Data that is being written is latched
and a multiplexer on each read port then supplies the latched write
data if the read address for that port equals the write address.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
 		2 years ago
.github/workflows ci: Add new Orange Crab build 3 years ago
constraints orangecrab: add Orange Crab r0.2 target 3 years ago
fpga Extend LiteDRAM VHDL wrapper to allow more than one clock line 3 years ago
hello_world Zero BSS in hello world test 2 years ago
include arty_a7: Add litesdcard interface 4 years ago
lib console: Add support for the 16550 UART 4 years ago
litedram Extend LiteDRAM VHDL wrapper to allow more than one clock line 3 years ago
liteeth Regenerate litedram and liteeth 3 years ago
litesdcard litesdcard: add lattice, regenerate 3 years ago
media Add title image 5 years ago
micropython tests: Add updated micropython build with 16550 support 4 years ago
openocd flash-arty: Add cable argument 3 years ago
rust_lib_demo console: Cleanup console API 4 years ago
scripts Provide debug access to SPRs in loadstore1 and mmu 2 years ago
sim-unisim Add a debug (DMI) bus and a JTAG interface to it on Xilinx FPGAs 5 years ago
tests Use FPU for division instructions if we have an FPU 2 years ago
uart16550 Add uart16550 files from fusesoc 4 years ago
verilator verilator: Specify top level module 3 years ago
.gitignore Add liteeth/build to gitignore 3 years ago
LICENSE Initial import of microwatt 5 years ago
Makefile dmi_dtm_ecp5: Use ECP5 JTAGG for DMI 3 years ago
README.md README: Add Linux on Microwatt instructions 2 years ago
cache_ram.vhdl Reformat cache_ram 4 years ago
common.vhdl register_file: Make read access to register file synchronous 2 years ago
control.vhdl Track hazards explicitly for XER overflow bits 2 years ago
core.vhdl decode1: Work out register addresses in decode1 2 years ago
core_debug.vhdl Provide debug access to SPRs in loadstore1 and mmu 2 years ago
core_dram_tb.vhdl Extend LiteDRAM VHDL wrapper to allow more than one clock line 3 years ago
core_flash_tb.vhdl Reformat testbenches 4 years ago
core_tb.vhdl Reformat testbenches 4 years ago
countbits.vhdl Allow integer instructions and load/store instructions to execute together 2 years ago
countbits_tb.vhdl Add a second execute stage to the pipeline 2 years ago
cr_file.vhdl execute1: Restructure to separate out execution of side effects 2 years ago
crhelpers.vhdl crhelpers: Constraint "crnum" integer 5 years ago
dcache.vhdl Simplify flow control in the dcache and loadstore units 2 years ago
dcache_tb.vhdl Reformat testbenches 4 years ago
decode1.vhdl register_file: Make read access to register file synchronous 2 years ago
decode2.vhdl Restore debug access to SPRs 2 years ago
decode_types.vhdl Finish off taking SPRs out of register file 2 years ago
divider.vhdl Add a second execute stage to the pipeline 2 years ago
divider_tb.vhdl Replaced VHDL assert and report with VUnit checking and logging 3 years ago
dmi_dtm_dummy.vhdl Fix build issue in dmi_dtm_dummy.vhdl 5 years ago
dmi_dtm_ecp5.vhdl dmi_dtm_ecp5: Use ECP5 JTAGG for DMI 3 years ago
dmi_dtm_tb.vhdl Reformat testbenches 4 years ago
dmi_dtm_xilinx.vhdl Fix some whitespace issues 3 years ago
dram_tb.vhdl Extend LiteDRAM VHDL wrapper to allow more than one clock line 3 years ago
execute1.vhdl Restore debug access to SPRs 2 years ago
fetch1.vhdl fetch1: Fix debug stop again 2 years ago
foreign_random.vhdl Make core testbenches recognized by VUnit 3 years ago
fpu.vhdl Start removing SPRs from register file 2 years ago
glibc_random.vhdl Reformat glibc_random 5 years ago
glibc_random_helpers.vhdl Reformat glibc_random 5 years ago
gpio.vhdl Remove some FPGA style signal inits 2 years ago
helpers.vhdl xics: Rework the irq_gen process 3 years ago
icache.vhdl Merge pull request #373 from antonblanchard/icache-insn-u-state 2 years ago
icache_tb.vhdl fix: fix icache_tb not finishing correctly 3 years ago
icache_test.bin icache_tb: Improve test and include test file 5 years ago
insn_helpers.vhdl core: Implement quadword loads and stores 4 years ago
loadstore1.vhdl loadstore1: Do SPR reading in stage 2 rather than stage 3 2 years ago
logical.vhdl Finish off taking SPRs out of register file 2 years ago
microwatt.core core: Make popcnt* take two cycles 3 years ago
mmu.vhdl Provide debug access to SPRs in loadstore1 and mmu 2 years ago
multiply.vhdl core: Add a short multiplier 3 years ago
multiply_tb.vhdl Replaced VHDL assert and report with VUnit checking and logging 3 years ago
nonrandom.vhdl Add random number generator and implement the darn instruction 4 years ago
plru.vhdl Reformat plru 4 years ago
plru_tb.vhdl Replaced VHDL assert and report with VUnit checking and logging 3 years ago
pmu.vhdl PMU: Add several more events 3 years ago
ppc_fx_insns.vhdl Fix some whitespace issues 3 years ago
random.vhdl Make core testbenches recognized by VUnit 3 years ago
register_file.vhdl register_file: Make read access to register file synchronous 2 years ago
rotator.vhdl Reformat rotator 4 years ago
rotator_tb.vhdl Replaced VHDL assert and report with VUnit checking and logging 3 years ago
run.py VUnit: style 3 years ago
sim_16550_uart.vhdl uart: Add a simulation model for the 16550 compatible UART 4 years ago
sim_bram.vhdl Rename 'do' signal to avoid verilator System Verilog warning 3 years ago
sim_bram_helpers.vhdl ram: Rework main RAM interface 5 years ago
sim_bram_helpers_c.c Consolidate VHPI code 5 years ago
sim_console.vhdl Reformat sim_console 5 years ago
sim_console_c.c sim_console: Fix polling to check for POLLIN 4 years ago
sim_jtag.vhdl Add jtag support in simulation via a socket 5 years ago
sim_jtag_socket.vhdl Add jtag support in simulation via a socket 5 years ago
sim_jtag_socket_c.c Consolidate VHPI code 5 years ago
sim_no_flash.vhdl spi: Add simulation support 4 years ago
sim_pp_uart.vhdl uart: Rename sim_uart.vhdl to sim_pp_uart.vhdl 4 years ago
sim_vhpi_c.c Consolidate VHPI code 5 years ago
sim_vhpi_c.h Consolidate VHPI code 5 years ago
soc.vhdl Remove some FPGA style signal inits 2 years ago
spi_flash_ctrl.vhdl Remove some FPGA style signal inits 2 years ago
spi_rxtx.vhdl Remove some FPGA style signal inits 2 years ago
sync_fifo.vhdl litedram: Add an L2 cache with store queue 4 years ago
syscon.vhdl Make wishbone addresses be in units of doublewords or words 3 years ago
utils.vhdl litedram: Add support for booting without BRAM 4 years ago
wishbone_arbiter.vhdl wb_arbiter: Early master selection 5 years ago
wishbone_bram_tb.bin ram: Rework main RAM interface 5 years ago
wishbone_bram_tb.vhdl Make wishbone addresses be in units of doublewords or words 3 years ago
wishbone_bram_wrapper.vhdl wishbone_bram_wrapper ram_addr_bits is 1 bit off 3 years ago
wishbone_debug_master.vhdl Make wishbone addresses be in units of doublewords or words 3 years ago
wishbone_types.vhdl Introduce addr_to_wb() and wb_to_addr() helpers 3 years ago
writeback.vhdl Start removing SPRs from register file 2 years ago
xics.vhdl xics: Fix warning when comparing two std_ulogic_vectors 3 years ago
xilinx-mult.vhdl core: Add a short multiplier 3 years ago

README.md

Microwatt

Microwatt

A tiny Open POWER ISA softcore written in VHDL 2008. It aims to be simple and easy to understand.

Simulation using ghdl

MicroPython running on Microwatt

You can try out Microwatt/Micropython without hardware by using the ghdl simulator. If you want to build directly for a hardware target board, see below.

  • Build micropython. If you aren't building on a ppc64le box you will need a cross compiler. If it isn't available on your distro grab the powerpc64le-power8 toolchain from https://toolchains.bootlin.com. You may need to set the CROSS_COMPILE environment variable to the prefix used for your cross compilers. The default is powerpc64le-linux-gnu-.
git clone https://github.com/micropython/micropython.git
cd micropython
cd ports/powerpc
make -j$(nproc)
cd ../../../

A prebuilt micropython image is also available in the micropython/ directory.

  • Microwatt uses ghdl for simulation. Either install this from your distro or build it. Microwatt requires ghdl to be built with the LLVM or gcc backend, which not all distros do (Fedora does, Debian/Ubuntu appears not to). ghdl with the LLVM backend is likely easier to build.

    If building ghdl from scratch is too much for you, the microwatt Makefile supports using Docker or Podman.

  • Next build microwatt:

git clone https://github.com/antonblanchard/microwatt
cd microwatt
make

To build using Docker:

make DOCKER=1

and to build using Podman:

make PODMAN=1
  • Link in the micropython image:
ln -s ../micropython/ports/powerpc/build/firmware.bin main_ram.bin

Or if you were using the pre-built image:

ln -s micropython/firmware.bin main_ram.bin
  • Now run microwatt, sending debug output to /dev/null:
./core_tb > /dev/null

Synthesis on Xilinx FPGAs using Vivado

  • Install Vivado (I'm using the free 2019.1 webpack edition).

  • Setup Vivado paths:

source /opt/Xilinx/Vivado/2019.1/settings64.sh
  • Install FuseSoC:
pip3 install --user -U fusesoc

Fedora users can get FuseSoC package via

sudo dnf copr enable sharkcz/danny
sudo dnf install fusesoc
  • If this is your first time using fusesoc, initialize fusesoc. This is needed to be able to pull down fussoc library components referenced by microwatt. Run
fusesoc init
fusesoc fetch uart16550
fusesoc library add microwatt /path/to/microwatt
  • Build using FuseSoC. For hello world (Replace nexys_video with your FPGA board such as --target=arty_a7-100): You may wish to ensure you have installed Digilent Board files or appropriate files for your board first.
fusesoc run --target=nexys_video microwatt --memory_size=16384 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex

You should then be able to see output via the serial port of the board (/dev/ttyUSB1, 115200 for example assuming standard clock speeds). There is a know bug where initial output may not be sent - try the reset (not programming button) on your board if you don't see anything.

  • To build micropython (currently requires 1MB of BRAM eg an Artix-7 A200):
fusesoc run --target=nexys_video microwatt

Linux on Microwatt

Mainline Linux supports Microwatt as of v5.14. The Arty A7 is the best tested platform, but it's also been tested on the OrangeCrab and ButterStick.

  1. Use buildroot to create a userspace

    A small change is required to glibc in order to support the VMX/AltiVec-less Microwatt, as float128 support is mandiatory and for this in GCC requires VSX/AltiVec. This change is included in Joel's buildroot fork, along with a defconfig:

    git clone -b microwatt https://github.com/shenki/buildroot
cd buildroot
make ppc64le_microwatt_defconfig
make

    The output is output/images/rootfs.cpio.

  2. Build the Linux kernel

    git clone https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
cd linux
make ARCH=powerpc microwatt_defconfig
make ARCH=powerpc CROSS_COMPILE=powerpc64le-linux-gnu- \
  CONFIG_INITRAMFS_SOURCE=/buildroot/output/images/rootfs.cpio -j`nproc`

    The output is arch/powerpc/boot/dtbImage.microwatt.elf.

  3. Build gateware using FuseSoC

    First configure FuseSoC as above.

    fusesoc run --build --target=arty_a7-100 microwatt --no_bram --memory_size=0

    The output is build/microwatt_0/arty_a7-100-vivado/microwatt_0.bit.

  4. Program the flash

    This operation will overwrite the contents of your flash.

    For the Arty A7 A100, set FLASH_ADDRESS to 0x400000 and pass -f a100.

    For the Arty A7 A35, set FLASH_ADDRESS to 0x300000 and pass -f a35.

    microwatt/openocd/flash-arty -f a100 build/microwatt_0/arty_a7-100-vivado/microwatt_0.bit
microwatt/openocd/flash-arty -f a100 dtbImage.microwatt.elf -t bin -a $FLASH_ADDRESS

  5. Connect to the second USB TTY device exposed by the FPGA

    minicom -D /dev/ttyUSB1

    The gateware has firmware that will look at FLASH_ADDRESS and attempt to parse an ELF there, loading it to the address specified in the ELF header and jumping to it.

Testing

  • A simple test suite containing random execution test cases and a couple of micropython test cases can be run with:
make -j$(nproc) check

Issues

  • There are a few instructions still to be implemented:
    • Vector/VMX/VSX