Commit Graph

44 Commits (master)

Author SHA1 Message Date
Matt Johnston 1874cad5b7 litedram: only run sdram init at first boot
Subsequent boots can skip the dram configuration, it will already
be in a usable state.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
1 year ago
Matt Johnston dfecda3a5f bin2hex: handle any file length, not just 8 or 4
Treat the input as if it was padded with zeroes to a multiple
of 8. This is needed if the .data in a binary changes size, it
won't be a nice multiple of 4 or 8. At present the microwatt
binaries all are multiples of 8, but making code alterations could make
bin2hex fail unexpectedly.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
1 year ago
Anton Blanchard e0bf743d7a litedram: MIGEN_GIT_SHA1 no longer defined
MIGEN_GIT_SHA1 is no longer defined in upstream litex, so remove it.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
1 year ago
Matt Johnston 8901e84d8d litedram: Add orangecrab-85-0.2 target
Parameters are based on
https://github.com/gregdavill/OrangeCrab-test-sw/blob/main/hw/OrangeCrab-bitstream.py
and litex-boards orangecrab.py

rtt_nom and cmd_delay are overridden for OrangeCrab, we do the same here.

Generated with litedram and litex
62abf9c ("litedram_gen: Add block_until_ready port parameter to control blocking behaviour.")
add2746a ("tools/litex_cli: Rename wb to bus.")

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Matt Johnston 08021ae28e litedram: set Makefile -Werror
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Matt Johnston 5a3cdc8b22 litedram: disable block_until_ready, regenerate
Recent litedram gets stuck at memtest unless block_until_ready=False.
(discussion in https://github.com/enjoy-digital/litedram/pull/292)

This change regenerates with latest litedram and litex
62abf9c ("litedram_gen: Add block_until_ready port parameter to control blocking behaviour.")
add2746a ("tools/litex_cli: Rename wb to bus.")

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Benjamin Herrenschmidt da0189af1e Add support for QMTech Wukong v2 board
For now only the V2 of the board (slightly different pinout)
and only the A100T variant. I also haven't added GPIOs or anything
else on the PMODs really.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Benjamin Herrenschmidt 4b1a413a2f Add support for more spansion flash
That's the one on the Wukong v2

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Paul Mackerras ca4eb46aea Make wishbone addresses be in units of doublewords or words
This makes the 64-bit wishbone buses have the address expressed in
units of doublewords (64 bits), and similarly for the 32-bit buses the
address is in units of words (32 bits).  This is to comply with the
wishbone spec.  Previously the addresses on the wishbone buses were in
units of bytes regardless of the bus data width, which is not correct
and caused problems with interfacing with externally-generated logic.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Joel Stanley bc3995804f litedram: Add sdcard to soc features
Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago
Anton Blanchard 07f2edc415 litedram: sdrinit() is now sdram_init()
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
2 years ago
Anton Blanchard 346686feb8 litedram: Fix compiler warning
define MAIN_RAM_BASE and MAIN_RAM_SIZE as unsigned long

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
2 years ago
Anton Blanchard ac546a3024 litedram: Update yaml files
Update the litedram yaml files based on latest upstream.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
2 years ago
Anton Blanchard 6034a9e31f litedram: simplify generate.py
We can call litedram_gen instead of doing the work ourselves.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
2 years ago
Anton Blanchard 3275304a7f litedram: Remove variables.mak
Instead of creating variables.mak, just pass the variables in on
the make command line.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
2 years ago
Boris Shingarov 679c547e5f fpga: Add support for Genesys2
Signed-off-by: Boris Shingarov <shingarov@labware.com>
3 years ago
Benjamin Herrenschmidt dbb137437c acorn: Add support for the Acorn CLE 215+
This is a NiteFury based PCIe M2 form-factor board originally
used for mining. It contains a speed grade 2 Artix 7 200T,
1GB of DDR3 and 32MB of flash.

The serial port is routed to pin 2 (RX) and 3 (TX) of the P2
connector (pin 1 is GND).

Note: Only 16MB of flash is currently usable until code is added
to configure the flash controller to use 4-bytes address commands
on that part.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
3 years ago
Benjamin Herrenschmidt 079af6443e litedram: Update generator to work with latest LiteX
Some changes in LiteX broke us. Adapt the build system and
increase the init RAM size to 24KB.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
3 years ago
Benjamin Herrenschmidt cc35c49928 litedram: Add generator for Genesys2
(Not yet generated)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
3 years ago
Michael Neuling 57604c1a6e
Merge pull request #213 from ozbenh/uart16550
Add support for standard 16550 style UART
3 years ago
Michael Neuling 9bbef035a6
Merge pull request #212 from ozbenh/liteeth
liteeth: Hook up LiteX LiteEth ethernet controller
3 years ago
Boris Shingarov 49f1389a21 Fix ld error in elf maketarget
The sdram_init ELF fails to link:

powerpc64le-linux-gnu-ld -static -nostdlib -T sdram_init.lds \
    --gc-sections -o sdram_init.elf head.o main.o sdram.o console.o \
    libc.o sdram_init.lds
powerpc64le-linux-gnu-ld: error: linker script file 'sdram_init.lds'
    appears multiple times
make: *** [Makefile:70: sdram_init.elf] Error 1

This is because sdram_init.lds is one of the prerequisites, and thus is
contained in $^.  However, it is also explicitly specified as part of
LDFLAGS, as the argument to -T.

Signed-off-by: Boris Shingarov <shingarov@labware.com>
3 years ago
Benjamin Herrenschmidt e3941109af console: Cleanup console API
Use a more generic console_init() instead of potato_uart_init(),
and do the same for interrupt control. There should be no
change in behaviour.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
3 years ago
Benjamin Herrenschmidt 8366710217 liteeth: Hook up LiteX LiteEth ethernet controller
Currently only generated for Arty.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
3 years ago
Benjamin Herrenschmidt 6aadad5a75 spi: Add booting from flash to litedram init
It will look for an ELF binary at the flash offset specified
for the board (currently 0x300000 on Arty but that could be
changed).

Note: litedram is regenerated in order to rebuild the init code,
which was done using a newer version of litedram from LiteX.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 63f10450a6 litedram: Fix DRAM init mem using too many address bits
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 3167515069 sw: Properly mask syscon register fields
Some fields might get extended with extra bits, use the appropriate
masks when reading the values.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 599fad117b litedram: Remove old "VexRiscV" based initializations
Support for this has bitrotted and would require refactoring of L2 to
be brought back. It's also not really needed anymore now that we ship
pre-generated litedram and that LiteX supports what we do.

So take it out, which simplifies some of the scripts as well. This also
fixes up CSR alignment the sim model.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt eaf6883e57 litedram: Update to latest LiteX/LiteDRAM version
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt a3857aac94 litedram: Add an L2 cache with store queue
This adds a cache between the wishbone and litedram with the following
features (at this point, it's still evolving)

  - 128 bytes line width in order to have a reasonable amount of
litedram pipelining on the 128-bit wide data port.

  - Configurable geometry otherwise

  - Stores are acked immediately on wishbone whether hit or miss
(minus a 2 cycles delay if there's a previous load response in the
way) and sent to LiteDRAM via 8 entries (configurable) store queue

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt bf1b98b958 litedram: Add support for booting without BRAM
This adds an option to disable the main BRAM and instead copy a
payload stashed along with the init code in the secondary BRAM
into DRAM and boot from there

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 6fe077910b litedram: Add simulation support
This adds a simulated litedram model along with the necessary
Makefile gunk to verilate it and wrap it for use by ghdl.

The core_dram_tb test bench is a variant of core_tb with
LiteDRAM simulated. It's not built by default, an explicit

make core_dram_tb

is necessary as to not require verilator to be installed for
the normal build process (also it's slow'ish).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 12f36b4a35 litedram: Split the init memory from the main wrapper
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 573b6b4bc4 soc: Rework interconnect
This changes the SoC interconnect such that the main 64-bit wishbone out
of the processor is first split between only 3 slaves (BRAM, DRAM and a
general "IO" bus) instead of all the slaves in the SoC.

The IO bus leg is then latched and down-converted to 32 bits data width,
before going through a second address decoder for the various IO devices.

This significantly reduces routing and timing pressure on the main bus,
allowing to get rid of frequent timing violations when synthetizing on
small'ish FPGAs such as the Artix-7 35T found on the original Arty board.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 8d64090a68 sw: Add full memory map to .h and use it for litedram .lds
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 30fd9aa298 litedram: Forward system reset signal
The wrapper wouldn't forward it. Make it do so

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt c0f537b845 litedram: Remove init delays
The clocks / resets are now stable

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt c19b5b8cc7 litedram: Update to new LiteX/LiteDRAM version
Things have changed a bit in upstream LiteX. LiteDRAM now exposes a
wishbone for the CSRs for example.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 7bc118c7db console: Move console files
console.c goes to a new lib/ where we'll store other general utilities
and console.h goes to include/

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt e3013f5754 litedram: Use 32-bit CSR bus
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 7f1f6b8525 litedram: Add support for Microwatt-initialized controller
This adds support for initializing the memory controller from microwatt
rather than using a built-in RiscV processor. This might require some
fixes to LiteX and LiteDRAM (they haven't been merged as of this commit
yet).

This is enabled in the shipped generated files and can be changed via
modifying the generator script to pass False to "mw_init"

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 12e8b0952d litedram: Improve sdram init boot messages
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 025cf5efe8 syscon: Add syscon registers
These provides some info about the SoC (though it's still somewhat
incomplete and needs more work, see comments).

There's also a control register for selecting DRAM vs. BRAM at 0
(and for soft-resetting the SoC but that isn't wired up yet).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 982cf166dd litedram: Add basic support for LiteX LiteDRAM
This comes in two parts:

 - A generator script which uses LiteX to generate litedram cores
along with their init files for various boards (currently Arty and
Nexys-video). This comes with configs for arty and nexys_video.

 - A fusesoc "generator" which uses pre-generated litedram cores

The generation process is manual on purpose. This include pre-generated
cores for the two above boards.

This is done so that one doesn't have to install LiteX to build
microwatt. In addition, the generator script or wrapper vhdl tend to
break when LiteX changes significantly which happens.

This is still rather standalone and hasn't been plumbed into the SoC
or the FPGA toplevel files yet.

At this point LiteDRAM self-initializes using a built-in VexRiscv
"Minimum" core obtained from LiteX and included in this commit. There
is some plumbing to generate and cores that are initialized by Microwatt
directly but this isn't working yet and so isn't enabled yet.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago