microwatt

A tiny Open POWER ISA softcore written in VHDL 2008

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Benjamin Herrenschmidt da0bd89c43 crhelpers: Constraint "crnum" integer This seems to save quite a few LUTs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>		5 years ago
fpga	Fix clk_gen_bypass	5 years ago
hello_world	Rebuild hello world assuming a 50MHz clock	5 years ago
media	Add title image	5 years ago
scripts	New C based JTAG debug tool	5 years ago
sim-unisim	Add a debug (DMI) bus and a JTAG interface to it on Xilinx FPGAs	5 years ago
tests	Initial import of microwatt	5 years ago
.gitignore	Update gitignore for new test bench build files	5 years ago
.travis.yml	Allow a full make check on Travis	5 years ago
LICENSE	Initial import of microwatt	5 years ago
Makefile	Remove execute2 stage	5 years ago
README.md	Add logo to README.md	5 years ago
cache_ram.vhdl	icache: Set associative icache	5 years ago
common.vhdl	Remove execute2 stage	5 years ago
control.vhdl	Add CR hazard detection	5 years ago
core.vhdl	Remove execute2 stage	5 years ago
core_debug.vhdl	fetch/icache: Fit icache in BRAM	5 years ago
core_tb.vhdl	Add core debug module	5 years ago
countzero.vhdl	countzero: Reorganize to have fewer levels of logic and fewer LUTs	5 years ago
countzero_tb.vhdl	countzero: Add a testbench	5 years ago
cr_file.vhdl	Reformat CR file	5 years ago
cr_hazard.vhdl	Add CR hazard detection	5 years ago
crhelpers.vhdl	crhelpers: Constraint "crnum" integer	5 years ago
decode1.vhdl	Merge pull request #105 from paulusmack/writeback	5 years ago
decode2.vhdl	Do sign-extension instructions in writeback instead of execute1	5 years ago
decode_types.vhdl	Merge pull request #105 from paulusmack/writeback	5 years ago
divider.vhdl	writeback: Do data formatting and condition recording in writeback	5 years ago
divider_tb.vhdl	writeback: Do data formatting and condition recording in writeback	5 years ago
dmi_dtm_dummy.vhdl	Fix build issue in dmi_dtm_dummy.vhdl	5 years ago
dmi_dtm_tb.vhdl	Wishbone debug module	5 years ago
dmi_dtm_xilinx.vhdl	Don't reset JTAG request register asynchronously	5 years ago
execute1.vhdl	crhelpers: Constraint "crnum" integer	5 years ago
fetch1.vhdl	fetch/icache: Fit icache in BRAM	5 years ago
fetch2.vhdl	fetch2: Remove blank line	5 years ago
glibc_random.vhdl	Reformat glibc_random	5 years ago
glibc_random_helpers.vhdl	Reformat glibc_random	5 years ago
gpr_hazard.vhdl	Add GPR hazard detection	5 years ago
helpers.vhdl	Reformat helpers	5 years ago
icache.vhdl	icache: Set associative icache	5 years ago
icache_tb.vhdl	icache: Use narrower block RAMs	5 years ago
insn_helpers.vhdl	Add MCRF instruction	5 years ago
loadstore1.vhdl	Reformat loadstore1	5 years ago
loadstore2.vhdl	writeback: Do data formatting and condition recording in writeback	5 years ago
logical.vhdl	Consolidate logical instructions	5 years ago
microwatt.core	Remove execute2 stage	5 years ago
multiply.vhdl	writeback: Do data formatting and condition recording in writeback	5 years ago
multiply_tb.vhdl	writeback: Do data formatting and condition recording in writeback	5 years ago
plru.vhdl	icache: Set associative icache	5 years ago
plru_tb.vhdl	plru: Add a simple PLRU module	5 years ago
ppc_fx_insns.vhdl	Implement absolute branches	5 years ago
register_file.vhdl	Fix register file size (there are 32 gprs).	5 years ago
rotator.vhdl	Add a rotate/mask/shift unit and use it in execute1	5 years ago
rotator_tb.vhdl	Add a rotate/mask/shift unit and use it in execute1	5 years ago
sim_console.vhdl	Reformat sim_console	5 years ago
sim_console_c.c	Make sim poll non-blocking	5 years ago
sim_jtag.vhdl	Add jtag support in simulation via a socket	5 years ago
sim_jtag_socket.vhdl	Add jtag support in simulation via a socket	5 years ago
sim_jtag_socket_c.c	debug/sim: Make connect/disconnect messages quieter	5 years ago
sim_uart.vhdl	Share soc.vhdl between FPGA and sim	5 years ago
simple_ram_behavioural.vhdl	Reformat simple_ram_behavioural	5 years ago
simple_ram_behavioural_helpers.vhdl	Reformat simple_ram_behavioural	5 years ago
simple_ram_behavioural_helpers_c.c	Silence some loadstore related debug	5 years ago
simple_ram_behavioural_tb.bin	Initial import of microwatt	5 years ago
simple_ram_behavioural_tb.vhdl	Reformat simple_ram_behavioural	5 years ago
soc.vhdl	Tighten UART address	5 years ago
wishbone_arbiter.vhdl	Use a 3 way WB arbiter and cleanup fpga toplevel	5 years ago
wishbone_debug_master.vhdl	wishbone_debug_master: Improve timing	5 years ago
wishbone_types.vhdl	Reformat wishbone code	5 years ago
writeback.vhdl	writeback: Remove a mux leg on data_in	5 years ago

README.md

Microwatt

A tiny Open POWER ISA softcore written in VHDL 2008. It aims to be simple and easy to understand.

Simulation using ghdl

MicroPython running on Microwatt

Build micropython. If you aren't building on a ppc64le box you will need a cross compiler. If it isn't available on your distro grab the powerpc64le-power8 toolchain from https://toolchains.bootlin.com

git clone https://github.com/mikey/micropython
cd micropython
git checkout powerpc
cd ports/powerpc
make -j$(nproc)
cd ../../../

Microwatt uses ghdl for simulation. Either install this from your distro or build it. Next build microwatt:

git clone https://github.com/antonblanchard/microwatt
cd microwatt
make

Link in the micropython image:

ln -s ../micropython/ports/powerpc/build/firmware.bin simple_ram_behavioural.bin

Now run microwatt, sending debug output to /dev/null:

./core_tb > /dev/null

Synthesis on Xilinx FPGAs using Vivado

Install Vivado (I'm using the free 2019.1 webpack edition).
Setup Vivado paths:

source /opt/Xilinx/Vivado/2019.1/settings64.sh

Install FuseSoC:

pip3 install --user -U fusesoc

Create a working directory and point FuseSoC at microwatt:

mkdir microwatt-fusesoc
cd microwatt-fusesoc
fusesoc library add microwatt /path/to/microwatt/

Build using FuseSoC. For hello world (Replace nexys_video with your FPGA board):

fusesoc run --target=nexys_video microwatt --memory_size=8192 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex

To build micropython (currently requires 1MB of BRAM eg an Artix-7 A200):

fusesoc run --target=nexys_video microwatt

Testing

A simple test suite containing random execution test cases and a couple of micropython test cases can be run with:

make -j$(nproc) check

Issues

This is functional, but very simple. We still have quite a lot to do:

There are a few instructions still to be implemented
Need to add caches and bypassing (in progress)
Need to add supervisor state (in progress)