writeback: Do data formatting and condition recording in writeback

This adds code to writeback to format data and test the result
against zero for the purpose of setting CR0.  The data formatter
is able to shift and mask by bytes and do byte reversal and sign
extension.  It can also put together bytes from two input
doublewords to support unaligned loads (including unaligned
byte-reversed loads).

The data formatter starts with an 8:1 multiplexer that is able
to direct any byte of the input to any byte of the output.  This
lets us rotate the data and simultaneously byte-reverse it.
The rotated/reversed data goes to a register for the unaligned
cases that overlap two doublewords.  Then there is per-byte logic
that does trimming, sign extension, and splicing together bytes
from a previous input doubleword (stored in data_latched) and the
current doubleword.  Finally the 64-bit result is tested to set
CR0 if rc = 1.

This removes the RC logic from the execute2, multiply and divide
units, and the shift/mask/byte-reverse/sign-extend logic from
loadstore2.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
jtag-port
Paul Mackerras 5 years ago
parent 45271acb35
commit 374f4c536d

@ -27,7 +27,7 @@ decode1.o: common.o decode_types.o
decode2.o: decode_types.o common.o helpers.o insn_helpers.o control.o
decode_types.o:
execute1.o: decode_types.o common.o helpers.o crhelpers.o insn_helpers.o ppc_fx_insns.o rotator.o logical.o countzero.o
execute2.o: common.o crhelpers.o ppc_fx_insns.o
execute2.o: common.o
fetch1.o: common.o
fetch2.o: common.o wishbone_types.o
glibc_random_helpers.o:
@ -43,9 +43,9 @@ loadstore1.o: common.o helpers.o
loadstore2.o: common.o helpers.o wishbone_types.o
logical.o: decode_types.o
multiply_tb.o: decode_types.o common.o glibc_random.o ppc_fx_insns.o multiply.o
multiply.o: common.o decode_types.o ppc_fx_insns.o crhelpers.o
multiply.o: common.o decode_types.o
divider_tb.o: decode_types.o common.o glibc_random.o ppc_fx_insns.o divider.o
divider.o: common.o decode_types.o crhelpers.o
divider.o: common.o decode_types.o
ppc_fx_insns.o: helpers.o
register_file.o: common.o
rotator.o: common.o
@ -58,7 +58,7 @@ sim_uart.o: wishbone_types.o sim_console.o
soc.o: common.o wishbone_types.o core.o wishbone_arbiter.o sim_uart.o simple_ram_behavioural.o dmi_dtm_xilinx.o wishbone_debug_master.o
wishbone_arbiter.o: wishbone_types.o
wishbone_types.o:
writeback.o: common.o
writeback.o: common.o crhelpers.o
dmi_dtm_tb.o: dmi_dtm_xilinx.o wishbone_debug_master.o
dmi_dtm_xilinx.o: wishbone_types.o sim-unisim/unisim_vcomponents.o
wishbone_debug_master.o: wishbone_types.o

@ -155,8 +155,13 @@ package common is
write_enable: std_ulogic;
write_reg : std_ulogic_vector(4 downto 0);
write_data : std_ulogic_vector(63 downto 0);
write_len : std_ulogic_vector(3 downto 0);
write_shift : std_ulogic_vector(2 downto 0);
sign_extend : std_ulogic;
byte_reverse : std_ulogic;
second_word : std_ulogic;
end record;
constant Loadstore2ToWritebackInit : Loadstore2ToWritebackType := (valid => '0', write_enable => '0', others => (others => '0'));
constant Loadstore2ToWritebackInit : Loadstore2ToWritebackType := (valid => '0', write_enable => '0', sign_extend => '0', byte_reverse => '0', second_word => '0', others => (others => '0'));

type Execute1ToExecute2Type is record
valid: std_ulogic;
@ -172,6 +177,7 @@ package common is

type Execute2ToWritebackType is record
valid: std_ulogic;
rc : std_ulogic;
write_enable : std_ulogic;
write_reg: std_ulogic_vector(4 downto 0);
write_data: std_ulogic_vector(63 downto 0);
@ -179,7 +185,7 @@ package common is
write_cr_mask : std_ulogic_vector(7 downto 0);
write_cr_data : std_ulogic_vector(31 downto 0);
end record;
constant Execute2ToWritebackInit : Execute2ToWritebackType := (valid => '0', write_enable => '0', write_cr_enable => '0', others => (others => '0'));
constant Execute2ToWritebackInit : Execute2ToWritebackType := (valid => '0', rc => '0', write_enable => '0', write_cr_enable => '0', others => (others => '0'));

type MultiplyToWritebackType is record
valid: std_ulogic;
@ -187,11 +193,9 @@ package common is
write_reg_enable : std_ulogic;
write_reg_nr: std_ulogic_vector(4 downto 0);
write_reg_data: std_ulogic_vector(63 downto 0);
write_cr_enable: std_ulogic;
write_cr_mask: std_ulogic_vector(7 downto 0);
write_cr_data: std_ulogic_vector(31 downto 0);
rc: std_ulogic;
end record;
constant MultiplyToWritebackInit : MultiplyToWritebackType := (valid => '0', write_reg_enable => '0', write_cr_enable => '0', others => (others => '0'));
constant MultiplyToWritebackInit : MultiplyToWritebackType := (valid => '0', write_reg_enable => '0', rc => '0', others => (others => '0'));

type DividerToWritebackType is record
valid: std_ulogic;
@ -199,11 +203,9 @@ package common is
write_reg_enable : std_ulogic;
write_reg_nr: std_ulogic_vector(4 downto 0);
write_reg_data: std_ulogic_vector(63 downto 0);
write_cr_enable: std_ulogic;
write_cr_mask: std_ulogic_vector(7 downto 0);
write_cr_data: std_ulogic_vector(31 downto 0);
rc: std_ulogic;
end record;
constant DividerToWritebackInit : DividerToWritebackType := (valid => '0', write_reg_enable => '0', write_cr_enable => '0', others => (others => '0'));
constant DividerToWritebackInit : DividerToWritebackType := (valid => '0', write_reg_enable => '0', rc => '0', others => (others => '0'));

type WritebackToRegisterFileType is record
write_reg : std_ulogic_vector(4 downto 0);

@ -5,7 +5,6 @@ use ieee.numeric_std.all;
library work;
use work.common.all;
use work.decode_types.all;
use work.crhelpers.all;

entity divider is
port (
@ -37,7 +36,6 @@ architecture behaviour of divider is
signal overflow : std_ulogic;
signal ovf32 : std_ulogic;
signal did_ovf : std_ulogic;
signal cr_data : std_ulogic_vector(2 downto 0);

begin
divider_0: process(clk)
@ -114,7 +112,7 @@ begin
divider_1: process(all)
begin
d_out.write_reg_nr <= write_reg;
d_out.write_cr_mask <= num_to_fxm(0);
d_out.rc <= rc;

if is_modulus = '1' then
result <= dend(128 downto 65);
@ -144,29 +142,18 @@ begin
else
oresult <= sresult;
end if;

if (did_ovf = '1') or (or (sresult) = '0') then
cr_data <= "001";
elsif (sresult(63) = '1') and not ((is_32bit = '1') and (is_modulus = '0')) then
cr_data <= "100";
else
cr_data <= "010";
end if;
end process;

divider_out: process(clk)
begin
if rising_edge(clk) then
d_out.write_reg_data <= oresult;
d_out.write_cr_data <= cr_data & '0' & x"0000000";
if count = "1000000" then
d_out.valid <= '1';
d_out.write_reg_enable <= '1';
d_out.write_cr_enable <= rc;
else
d_out.valid <= '0';
d_out.write_reg_enable <= '0';
d_out.write_cr_enable <= '0';
end if;
end if;
end process;

@ -68,7 +68,7 @@ begin
assert d2.write_reg_enable = '1';
assert d2.write_reg_nr = "10001";
assert d2.write_reg_data = x"000000000000f001" report "result " & to_hstring(d2.write_reg_data);
assert d2.write_cr_enable = '0';
assert d2.rc = '0';

wait for clk_period;
assert d2.valid = '0' report "valid";
@ -92,9 +92,7 @@ begin
assert d2.write_reg_enable = '1';
assert d2.write_reg_nr = "10001";
assert d2.write_reg_data = x"000000000000f001" report "result " & to_hstring(d2.write_reg_data);
assert d2.write_cr_enable = '1';
assert d2.write_cr_mask = "10000000";
assert d2.write_cr_data = x"40000000" report "cr data is " & to_hstring(d2.write_cr_data);
assert d2.rc = '1';

wait for clk_period;
assert d2.valid = '0';
@ -129,8 +127,6 @@ begin
end if;
assert to_hstring(behave_rt) = to_hstring(d2.write_reg_data)
report "bad divd expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for divd";
end loop;
end loop;
end loop;
@ -165,8 +161,6 @@ begin
end if;
assert to_hstring(behave_rt) = to_hstring(d2.write_reg_data)
report "bad divdu expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for divdu";
end loop;
end loop;
end loop;
@ -207,8 +201,6 @@ begin
end if;
assert to_hstring(behave_rt) = to_hstring(d2.write_reg_data)
report "bad divde expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data) & " for ra = " & to_hstring(ra) & " rb = " & to_hstring(rb);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for divde";
end loop;
end loop;
end loop;
@ -246,8 +238,6 @@ begin
end if;
assert to_hstring(behave_rt) = to_hstring(d2.write_reg_data)
report "bad divdeu expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data) & " for ra = " & to_hstring(ra) & " rb = " & to_hstring(rb);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for divdeu";
end loop;
end loop;
end loop;
@ -284,8 +274,6 @@ begin
end if;
assert behave_rt = d2.write_reg_data
report "bad divw expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for divw";
end loop;
end loop;
end loop;
@ -322,8 +310,6 @@ begin
end if;
assert behave_rt = d2.write_reg_data
report "bad divwu expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for divwu";
end loop;
end loop;
end loop;
@ -363,8 +349,6 @@ begin
end if;
assert behave_rt = d2.write_reg_data
report "bad divwe expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data) & " for ra = " & to_hstring(ra) & " rb = " & to_hstring(rb);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for divwe";
end if;
end loop;
end loop;
@ -402,8 +386,6 @@ begin
end if;
assert behave_rt = d2.write_reg_data
report "bad divweu expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data) & " for ra = " & to_hstring(ra) & " rb = " & to_hstring(rb);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for divweu";
end loop;
end loop;
end loop;
@ -441,8 +423,6 @@ begin
end if;
assert behave_rt = d2.write_reg_data
report "bad modsd expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for modsd";
end loop;
end loop;
end loop;
@ -480,8 +460,6 @@ begin
end if;
assert behave_rt = d2.write_reg_data
report "bad modud expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for modud";
end loop;
end loop;
end loop;
@ -524,8 +502,6 @@ begin
end if;
assert behave_rt = d2.write_reg_data
report "bad modsw expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for modsw";
end loop;
end loop;
end loop;
@ -563,8 +539,6 @@ begin
end if;
assert behave_rt(31 downto 0) = d2.write_reg_data(31 downto 0)
report "bad moduw expected " & to_hstring(behave_rt) & " got " & to_hstring(d2.write_reg_data);
assert ppc_cmpi('1', behave_rt, x"0000") & x"0000000" = d2.write_cr_data
report "bad CR setting for moduw";
end loop;
end loop;
end loop;

@ -4,8 +4,6 @@ use ieee.numeric_std.all;

library work;
use work.common.all;
use work.crhelpers.all;
use work.ppc_fx_insns.all;

-- 2 cycle ALU
-- We handle rc form instructions here
@ -41,12 +39,7 @@ begin
v.write_cr_enable := e_in.write_cr_enable;
v.write_cr_mask := e_in.write_cr_mask;
v.write_cr_data := e_in.write_cr_data;

if e_in.valid = '1' and e_in.rc = '1' then
v.write_cr_enable := '1';
v.write_cr_mask := num_to_fxm(0);
v.write_cr_data := ppc_cmpi('1', e_in.write_data, x"0000") & x"0000000";
end if;
v.rc := e_in.rc;

-- Update registers
rin <= v;

@ -26,9 +26,6 @@ architecture behave of loadstore2 is
signal l_saved : Loadstore1ToLoadstore2Type;
signal w_tmp : Loadstore2ToWritebackType;
signal m_tmp : wishbone_master_out;
signal read_data : std_ulogic_vector(63 downto 0);
signal read_data_shift : std_ulogic_vector(2 downto 0);
signal sign_extend_byte_reverse: std_ulogic_vector(1 downto 0);
signal dlength : std_ulogic_vector(3 downto 0);

type state_t is (IDLE, WAITING_FOR_READ_ACK, WAITING_FOR_WRITE_ACK);
@ -61,37 +58,6 @@ architecture behave of loadstore2 is
end function wishbone_data_sel;
begin

loadstore2_1: process(all)
variable tmp : std_ulogic_vector(63 downto 0);
variable data : std_ulogic_vector(63 downto 0);
begin
tmp := std_logic_vector(shift_right(unsigned(read_data), to_integer(unsigned(read_data_shift)) * 8));
data := (others => '0');
case to_integer(unsigned(dlength)) is
when 0 =>
when 1 =>
data(7 downto 0) := tmp(7 downto 0);
when 2 =>
data(15 downto 0) := tmp(15 downto 0);
when 4 =>
data(31 downto 0) := tmp(31 downto 0);
when 8 =>
data(63 downto 0) := tmp(63 downto 0);
when others =>
assert false report "invalid length" severity failure;
data(63 downto 0) := tmp(63 downto 0);
end case;

case sign_extend_byte_reverse is
when "10" =>
w_tmp.write_data <= sign_extend(data, to_integer(unsigned(l_saved.length)));
when "01" =>
w_tmp.write_data <= byte_reverse(data, to_integer(unsigned(l_saved.length)));
when others =>
w_tmp.write_data <= data;
end case;
end process;

w_out <= w_tmp;
m_out <= m_tmp;

@ -102,11 +68,13 @@ begin
w_tmp.valid <= '0';
w_tmp.write_enable <= '0';
w_tmp.write_reg <= (others => '0');
w_tmp.write_len <= "1000";
w_tmp.write_shift <= "000";
w_tmp.sign_extend <= '0';
w_tmp.byte_reverse <= '0';
w_tmp.second_word <= '0';

l_saved <= l_saved;
read_data_shift <= "000";
sign_extend_byte_reverse <= "00";
dlength <= "1000";

case_0: case state is
when IDLE =>
@ -131,7 +99,7 @@ begin
if l_in.update = '1' then
w_tmp.write_enable <= '1';
w_tmp.write_reg <= l_in.update_reg;
read_data <= l_in.addr;
w_tmp.write_data <= l_in.addr;
end if;

state <= WAITING_FOR_READ_ACK;
@ -148,15 +116,15 @@ begin

when WAITING_FOR_READ_ACK =>
if m_in.ack = '1' then
read_data <= m_in.dat;
read_data_shift <= l_saved.addr(2 downto 0);
dlength <= l_saved.length;
sign_extend_byte_reverse <= l_saved.sign_extend & l_saved.byte_reverse;

-- write data to register file
w_tmp.valid <= '1';
w_tmp.write_enable <= '1';
w_tmp.write_data <= m_in.dat;
w_tmp.write_reg <= l_saved.write_reg;
w_tmp.write_len <= l_saved.length;
w_tmp.write_shift <= l_saved.addr(2 downto 0);
w_tmp.sign_extend <= l_saved.sign_extend;
w_tmp.byte_reverse <= l_saved.byte_reverse;

m_tmp <= wishbone_master_out_init;
state <= IDLE;
@ -168,7 +136,7 @@ begin
if l_saved.update = '1' then
w_tmp.write_enable <= '1';
w_tmp.write_reg <= l_saved.update_reg;
read_data <= l_saved.addr;
w_tmp.write_data <= l_saved.addr;
end if;

m_tmp <= wishbone_master_out_init;

@ -5,8 +5,6 @@ use ieee.numeric_std.all;
library work;
use work.common.all;
use work.decode_types.all;
use work.ppc_fx_insns.all;
use work.crhelpers.all;

entity multiply is
generic (
@ -88,12 +86,7 @@ begin
if v.multiply_pipeline(PIPELINE_DEPTH-1).valid = '1' then
m_out.valid <= '1';
m_out.write_reg_enable <= '1';

if v.multiply_pipeline(PIPELINE_DEPTH-1).rc = '1' then
m_out.write_cr_enable <= '1';
m_out.write_cr_mask <= num_to_fxm(0);
m_out.write_cr_data <= ppc_cmpi('1', d2, x"0000") & x"0000000";
end if;
m_out.rc <= v.multiply_pipeline(PIPELINE_DEPTH-1).rc;
end if;

rin <= v;

@ -61,7 +61,7 @@ begin
assert m2.write_reg_enable = '1';
assert m2.write_reg_nr = "10001";
assert m2.write_reg_data = x"0000000001111000";
assert m2.write_cr_enable = '0';
assert m2.rc = '0';

wait for clk_period;
assert m2.valid = '0';
@ -79,8 +79,7 @@ begin
assert m2.write_reg_enable = '1';
assert m2.write_reg_nr = "10001";
assert m2.write_reg_data = x"0000000001111000";
assert m2.write_cr_enable = '1';
assert m2.write_cr_data = x"40000000";
assert m2.rc = '1';

-- test mulld
mulld_loop : for i in 0 to 1000 loop

@ -4,6 +4,7 @@ use ieee.numeric_std.all;

library work;
use work.common.all;
use work.crhelpers.all;

entity writeback is
port (
@ -22,12 +23,44 @@ entity writeback is
end entity writeback;

architecture behaviour of writeback is
subtype byte_index_t is unsigned(2 downto 0);
type permutation_t is array(0 to 7) of byte_index_t;
subtype byte_trim_t is std_ulogic_vector(1 downto 0);
type trim_ctl_t is array(0 to 7) of byte_trim_t;
type byte_sel_t is array(0 to 7) of std_ulogic;

signal data_len : unsigned(3 downto 0);
signal data_in : std_ulogic_vector(63 downto 0);
signal data_permuted : std_ulogic_vector(63 downto 0);
signal data_trimmed : std_ulogic_vector(63 downto 0);
signal data_latched : std_ulogic_vector(63 downto 0);
signal perm : permutation_t;
signal use_second : byte_sel_t;
signal byte_offset : unsigned(2 downto 0);
signal brev_lenm1 : unsigned(2 downto 0);
signal trim_ctl : trim_ctl_t;
signal rc : std_ulogic;
signal partial_write : std_ulogic;
signal sign_extend : std_ulogic;
signal negative : std_ulogic;
signal second_word : std_ulogic;
begin
writeback_0: process(clk)
begin
if rising_edge(clk) then
if partial_write = '1' then
data_latched <= data_permuted;
end if;
end if;
end process;

writeback_1: process(all)
variable x : std_ulogic_vector(0 downto 0);
variable y : std_ulogic_vector(0 downto 0);
variable z : std_ulogic_vector(0 downto 0);
variable w : std_ulogic_vector(0 downto 0);
variable j : integer;
variable k : unsigned(3 downto 0);
begin
x := "" & e_in.valid;
y := "" & l_in.valid;
@ -41,10 +74,11 @@ begin
w := "" & d_in.write_reg_enable;
assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) + to_integer(unsigned(z)) + to_integer(unsigned(w))) <= 1 severity failure;

x := "" & e_in.write_cr_enable;
y := "" & m_in.write_cr_enable;
z := "" & d_in.write_cr_enable;
assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) + to_integer(unsigned(z))) <= 1 severity failure;
w := "" & e_in.write_cr_enable;
x := "" & (e_in.write_enable and e_in.rc);
y := "" & (m_in.valid and m_in.rc);
z := "" & (d_in.valid and d_in.rc);
assert (to_integer(unsigned(w)) + to_integer(unsigned(x)) + to_integer(unsigned(y)) + to_integer(unsigned(z))) <= 1 severity failure;

w_out <= WritebackToRegisterFileInit;
c_out <= WritebackToCrFileInit;
@ -54,10 +88,19 @@ begin
complete_out <= '1';
end if;

rc <= '0';
brev_lenm1 <= "000";
byte_offset <= "000";
data_len <= x"8";
partial_write <= '0';
sign_extend <= '0';
second_word <= '0';

if e_in.write_enable = '1' then
w_out.write_reg <= e_in.write_reg;
w_out.write_data <= e_in.write_data;
data_in <= e_in.write_data;
w_out.write_enable <= '1';
rc <= e_in.rc;
end if;

if e_in.write_cr_enable = '1' then
@ -68,32 +111,89 @@ begin

if l_in.write_enable = '1' then
w_out.write_reg <= l_in.write_reg;
w_out.write_data <= l_in.write_data;
data_in <= l_in.write_data;
data_len <= unsigned(l_in.write_len);
byte_offset <= unsigned(l_in.write_shift);
sign_extend <= l_in.sign_extend;
if l_in.byte_reverse = '1' then
brev_lenm1 <= unsigned(l_in.write_len(2 downto 0)) - 1;
end if;
w_out.write_enable <= '1';
second_word <= l_in.second_word;
if l_in.valid = '0' and (data_len + byte_offset > 8) then
partial_write <= '1';
end if;
end if;

if m_in.write_reg_enable = '1' then
w_out.write_enable <= '1';
w_out.write_reg <= m_in.write_reg_nr;
w_out.write_data <= m_in.write_reg_data;
end if;

if m_in.write_cr_enable = '1' then
c_out.write_cr_enable <= '1';
c_out.write_cr_mask <= m_in.write_cr_mask;
c_out.write_cr_data <= m_in.write_cr_data;
data_in <= m_in.write_reg_data;
rc <= m_in.rc;
end if;

if d_in.write_reg_enable = '1' then
w_out.write_enable <= '1';
w_out.write_reg <= d_in.write_reg_nr;
w_out.write_data <= d_in.write_reg_data;
data_in <= d_in.write_reg_data;
rc <= d_in.rc;
end if;

if d_in.write_cr_enable = '1' then
-- shift and byte-reverse data bytes
for i in 0 to 7 loop
k := ('0' & (to_unsigned(i, 3) xor brev_lenm1)) + ('0' & byte_offset);
perm(i) <= k(2 downto 0);
use_second(i) <= k(3);
end loop;
for i in 0 to 7 loop
j := to_integer(perm(i)) * 8;
data_permuted(i * 8 + 7 downto i * 8) <= data_in(j + 7 downto j);
end loop;

-- If the data can arrive split over two cycles, this will be correct
-- provided we don't have both sign extension and byte reversal.
negative <= (data_len(2) and data_permuted(31)) or (data_len(1) and data_permuted(15)) or
(data_len(0) and data_permuted(7));

-- trim and sign-extend
for i in 0 to 7 loop
if i < to_integer(data_len) then
if second_word = '1' then
trim_ctl(i) <= '1' & not use_second(i);
else
trim_ctl(i) <= not use_second(i) & '0';
end if;
else
trim_ctl(i) <= '0' & (negative and sign_extend);
end if;
end loop;
for i in 0 to 7 loop
case trim_ctl(i) is
when "11" =>
data_trimmed(i * 8 + 7 downto i * 8) <= data_latched(i * 8 + 7 downto i * 8);
when "10" =>
data_trimmed(i * 8 + 7 downto i * 8) <= data_permuted(i * 8 + 7 downto i * 8);
when "01" =>
data_trimmed(i * 8 + 7 downto i * 8) <= x"FF";
when others =>
data_trimmed(i * 8 + 7 downto i * 8) <= x"00";
end case;
end loop;

-- deliver to regfile
w_out.write_data <= data_trimmed;

-- test value against 0 and set CR0 if requested
if rc = '1' then
c_out.write_cr_enable <= '1';
c_out.write_cr_mask <= d_in.write_cr_mask;
c_out.write_cr_data <= d_in.write_cr_data;
c_out.write_cr_mask <= num_to_fxm(0);
if data_trimmed(63) = '1' then
c_out.write_cr_data <= x"80000000";
elsif or (data_trimmed(62 downto 0)) = '1' then
c_out.write_cr_data <= x"40000000";
else
c_out.write_cr_data <= x"20000000";
end if;
end if;
end process;
end;

Loading…
Cancel
Save