Commit Graph

498 Commits (01046527ba0e720a3f2a97e4d837a5d12ae68061)
 

Author SHA1 Message Date
Anton Blanchard 23f8702e68
Merge pull request #90 from antonblanchard/newcrf-inferred-latch
Don't infer latch for newcrf
5 years ago
Anton Blanchard 57b7f1ed71 Don't infer latch for newcrf
Always initialize newcrf to avoid inferring a latch.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Michael Neuling 1edc4aa004 Update gitignore for new test bench build files
Just ignore all *_tb files

Signed-off-by: Michael Neuling <mikey@neuling.org>
5 years ago
Anton Blanchard f76b5f9ea2
Merge pull request #87 from antonblanchard/cmod-a7-freq
Fix cmod-a7 frequency
5 years ago
Anton Blanchard 9b8c094cf6 Fix cmod-a7 frequency
The cmod-a7 is ignoring the clk_frequency parameter and running at
100 MHz. Fix it.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 16ca868909
Merge pull request #86 from antonblanchard/outstanding-range
Limit outstanding range
5 years ago
Anton Blanchard 938b453501
Merge pull request #85 from antonblanchard/leadingzeroes-fix
Fix count-leading/trailing-zeroes
5 years ago
Anton Blanchard e54db5b496
Merge pull request #79 from deece/uart_address
Tighten UART address
5 years ago
Anton Blanchard 4016f69e70 Limit outstanding range
outstanding can only ever be -1 to 2 at the moment (0 or 1 on a
rising clock edge). Vivado is synthesizing a much wider adder
which is silly. Constrain it with a range statement. This should
be good for timing and saves us about 85 LUTs.

This will get relaxed when we add more pipelining, but only by a
few bits.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 1b559aee31 Fix count-leading/trailing-zeroes
The current code simulates correctly, but produces miscompares when synthesized
onto an FPGA. On closer inspection GHDL synthesis complains about inferred
latches and there does seem to be issues.

Convert it to variables that are always initialized to zero at the start of the
process.

Fixes: 24a4a796ce ("execute: Consolidate count-leading/trailing-zeroes implementations")
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Cameron Kaiser 07d3c8e4de Add logo to README.md
Signed-off-by: Cameron Kaiser <classilla@floodgap.com>
5 years ago
Cameron Kaiser 0cb0f78777 Add title image
Signed-off-by: Cameron Kaiser <classilla@floodgap.com>
5 years ago
Anton Blanchard 3c6e66dc96
Merge pull request #83 from paulusmack/logical
execute: Consolidate count-leading/trailing-zeroes implementations
5 years ago
Anton Blanchard 4b7b702e01
Merge pull request #81 from antonblanchard/logical
Consolidate logical instructions
5 years ago
Anton Blanchard 5dff75219c
Merge pull request #82 from antonblanchard/icache-set-assoc
A new set associative icache from Ben
5 years ago
Paul Mackerras 24a4a796ce execute: Consolidate count-leading/trailing-zeroes implementations
This adds combinatorial logic that does 32-bit and 64-bit count
leading and trailing zeroes in one unit, and consolidates the
four instructions under a single OP_CNTZ opcode.

This saves 84 slice LUTs on the Arty A7-100.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Anton Blanchard b8fb721b81 Consolidate logical instructions
Consolidate and/andc/nand, or/orc/nor and xor/eqv, using a common
invert on the input and output. This saves us about 200 LUTs.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Alastair D'Silva ccd52bf6f2 Tighten UART address
The current scheme has UART0 repeating throughout the UART address range.

This patch tightens the address checking so that it only occurs once.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
5 years ago
Benjamin Herrenschmidt b56b46b7d1 icache: Set associative icache
This adds support for set associativity to the icache. It can still
be direct mapped by setting NUM_WAYS to 1.

The replacement policy uses a simple tree-PLRU for each set.

This is only lightly tested, tests pass but I have to double check
that we are using the ways effectively and not creating duplicates.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 004eb074c9 plru: Add a simple PLRU module
Tested in sim only for now

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt e1cf44cec8 fetch2: Remove blank line
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt d40c1c1a25 icache: Use narrower block RAMs
We only ever access the cache memory for at most the wishbone bus
width at a time. So having the BRAMs organized as a cache-line-wide
port is a waste of resources.

Instead, use a wishbone-wide memory and store a line as consecutive
rows in the BRAM.

This significantly improves BRAM usage in the FPGA as we can now use
more rows in the BRAM blocks. It also saves a few LUTs and muxes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt d415e5544a fetch/icache: Fit icache in BRAM
The goal is to have the icache fit in BRAM by latching the output
into a register. In order to avoid timing issues , we need to give
the BRAM a full cycle on reads, and thus we souce the BRAM address
directly from fetch1 latched NIA.

(Note: This will be problematic if/when we want to hash the address,
we'll probably be better off having fetch1 latch a fully hashed address
along with the normal one, so the icache can use the former to address
the BRAM and pass the latter along)

One difficulty is that we cannot really stall the icache without adding
more combo logic that would break the "one full cycle" BRAM model. This
means that on stalls from decode, by the time we stall fetch1, it has
already gone to the next address, which the icache is already latching.

We work around this by having a "stash" buffer in fetch2 that will stash
away the icache output on a stall, and override the output of the icache
with the content of the stash buffer when unstalling.

This requires a rewrite of the stop/step debug logic as well. We now
do most of the hard work in fetch1 which makes more sense.

Note: Vivado is still not inferring an built-in output register for the
BRAMs. I don't want to add another cycle... I don't fully understand why
it wouldn't be able to treat current_row as such but clearly it won't. At
least the timing seems good enough now for 100Mhz, possibly more.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 3589f92d5a fetch1: Simplify a bit
There is no need to have two different state records

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt fb01dc8a90 icache: Reformat icache
No code change

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Anton Blanchard 3a2c4b8978
Merge pull request #78 from paulusmack/new-decode
New decode
5 years ago
Paul Mackerras f7c393ba7e Add a rotate/mask/shift unit and use it in execute1
This adds a new entity 'rotator' which contains combinatorial logic
for rotating and masking 64-bit values.  It implements the operations
of the rlwinm, rlwnm, rlwimi, rldicl, rldicr, rldic, rldimi, rldcl,
rldcr, sld, slw, srd, srw, srad, sradi, sraw and srawi instructions.
It consists of a 3-stage 64-bit rotator using 4:1 multiplexors at
each stage, two mask generators, output logic and control logic.

The insn_type_t values used for these instructions have been reduced
to just 5: OP_RLC, OP_RLCL and OP_RLCR for the rotate and mask
instructions (clear both left and right, clear left, clear right
variants), OP_SHL for left shifts, and OP_SHR for right shifts.
The control signals for the rotator are derived from the opcode
and from the is_32bit and is_signed fields of the decode_rom_t.

The rotator is instantiated as an entity in execute1 so that we can
be sure we only have one of it.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 90b6e27380 Generalize the mul_32bit and mul_signed fields of decode_rom_t
This changes the names of the mul_32bit and mul_signed fields of
decode_rom_t to is_32bit and is_signed, so they can be used with
other types of operations besides multiplies.

This plumbs the is_32bit and is_signed flags down into execute1,
though they are not used at this point.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 7fe84220a5 decode: Avoid multiplexing from instruction reg fields to regfile address ports
This aims to simplify the logic between the instruction image and
the register file read address ports and reduce the size of the decode
tables.  With this patch, the input_reg_a column of the decode tables
can only select RA or zeroes, the input_reg_b column can only select
RB or a constant (0, -1, or an immediate value from the instruction),
and the input_reg_c columns can only select RS or zeroes.

That means that the rotate/shift/logical ops now have their first
input coming in via the input_reg_c column.  That means we need to
add a read_data3 field to the Decode2ToExecuteType record, but that
will go away again when we split out the rotate/mask/logical ops to
their own unit.

As a related but not tightly connected change, this patch also sets
the read1_enable signal to the register file be 0 when RA=0 and the
input_reg_a for the instruction is RA_OR_ZERO (previously it was 1).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 96b402a4bf Consolidate add/subtract instructions into a single op
All of the PPC add and subtract instructions, including carrying
and extended versions, do much the same arithmetic operation:

	result = (I xor A) + B + C

where A is the value from RA, I provides a logical inversion of A
(i.e. I is 0 or -1), B is either from RB or is a constant 0 or -1,
and C is 0, 1 or the carry bit from XER (CA).

To consolidate all the add/subtract instructions into a single
OP_ADD, we add a column to decode_rom_t to indicate when A should
be inverted, and change the input_carry field to a 3-state selector
to select C in the equation above.

This also adds a new "CONST_M1" value for input_reg_b_t to indicate
that B is a constant -1.  This allows us to implement addme and
subfme.

The addex instruction appears not to exist, so the comments referring
to it are removed.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Anton Blanchard f1ac8894b1
Merge pull request #80 from antonblanchard/misc
Reduce register file footprint
5 years ago
Paul Mackerras b0f302ecf4 decode: Make all update-form indexed loads and stores use RA_OR_ZERO
Experimentation on POWER9 indicates that the invalid form of lbzux
with RA=0 uses just RB as the address, not R0 + RB.  Extrapolating
this to all update-form loads and stores with RA=0, change all the
update-form loads and stores to use RA_OR_ZERO rather than RA.

This then means that all decode ROM entries with insn_type = LDST
have input_reg_a = RA_OR_ZERO.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Benjamin Herrenschmidt ec1868f7d2 register_file: Move GPRs into distributed RAM
The register file is currently implemented as a whole pile of individual
1-bit registers instead of LUT memory which is a huge waste of FPGA
space.

This is caused by the output signal exposing the register file to the
outside world for simulation debug.

This removes that output, and moves the dumping of the register file
to the register file module itself. This saves about 8% of fpga on
the little Arty A7-35T.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Paul Mackerras 58b06eb5f3 decode: Remove const fields from decode_rom_t
The const* fields of decode_rom_t drove multiplexers in decode2 that
picked out various instruction fields and put them into the const*
fields of the Decode2ToExecute1Type record, from where they were
used in execute1.  However, the code in execute1 can just as easily
use the appropriate fields of the original instruction word, since
that is now available in execute1.  This therefore changes the
code to do that, resulting in smaller decode tables.

Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Benjamin Herrenschmidt a2969fa298 debug/sim: Make connect/disconnect messages quieter
Those don't need to go to stderr, send them to stdout instead

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Paul Mackerras 143d0ae9e4 decode: Fix larx/stcx instructions to use RA_OR_ZERO not RA
The l?arx and st?cx. instructions are defined to use the normal indexed
mode address calculations, i.e. (RA|0) + RB.  Fix their entries in the
decode table to say RA_OR_ZERO rather than RA.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras bbae2d1eda decode: Index minor op table with insn bits for opcode 31
This changes decode_op_31_array from being indexed by a ppc_insn_t
(which is derived from the instruction word by a whole series of
if/elsif statements) to being indexed directly by bits 10...1 of
the instruction word.  With this we no longer need ppc_insn.

This then means that the decode1 stage doesn't distinguish between
mfcr and mfocrf, or between mtcrf and mtocrf, since those are
distinguished by the value in bit 20 of the instruction.  To
accommodate that, execute1 changes so that the one op value (OP_MFCR)
does either the mfcr or the mfocrf behaviour depending on bit 20
of the instruction word; and similarly for mtcrf/mtocrf.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 21d3f8a5ed decode: Index minor op table with insn bits for opcode 30
This comprises the 64-bit rotate and mask instructions.  In order to
reduce the table index to 3 bits, we combine rldcl and rdlcr into a
single op (OP_RLDCX), and choose the right mask at execute time based
on bit 1 of the instruction word.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 00e9f801f6 decode: Index minor op table with insn bits for opcode 19
This changes the decoding of major opcode 19 from using the ppc_insn_t
index to using bits of the instruction word directly.  Opcode 19 has
a 10-bit minor opcode field (bits 10..1) but the space is sparsely
filled.  Therefore we index a table of single-bit entries with the
10-bit minor opcode to filter out the illegal minor opcodes, and
index a table using just 3 bits -- 5, 3 and 2 -- of the instruction
to get the decode entry.  This groups together all the instructions
in 4 columns of the opcode map as a single entry.  That means that
mcrf and all the CR logical ops get grouped together, and bcctr, bclr
and bctar get grouped together.  At present the CR logical ops are not
implemented, so their grouping has no impact.

The code for bclr and bcctr in execute1 is now common, using a single
op, and it now determines the branch address by looking at bit 10 of
the instruction word at execute time.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras e30a87593a decode: Start moving towards decoding by major opcode first
With this, we have a table for most major opcodes and separate
tables for each major opcode that has further decoding required.
These tables are still mostly indexed by the ppc_insn_t values,
however.

A few things are still decoded completely at the top level: nop,
attn and sim_config.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras c9e92483b8 decode: Push mtspr/mfspr register decoding down into execute1
Instead of doing mfctr, mflr, mftb, mtctr, mtlr as separate ops,
just pass down mfspr and mtspr ops with the spr number and let
execute1 decode which SPR we're addressing.  This will help reduce
the number of instruction bits decode1 needs to look at.

In fact we now pass down the whole instruction from decode2 to
execute1.  We will need more bits of the instruction in future,
and the tools should just optimize away any that we don't end
up using.  Since the 'aa' bit was just a copy of an instruction
bit, we can now remove it from the record.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Benjamin Herrenschmidt 3e6f656a90 Add MCRF instruction
Hopefully it's not too timing catastrophic. The variable newcrf will
be handy for the other CR ops when we implement them I suspect.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 554ae88540 Implement absolute branches
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Anton Blanchard 4174cd8e93
Merge pull request #77 from antonblanchard/timing
A number of timing fixes
5 years ago
Anton Blanchard 4a9a9df4dd
Merge pull request #76 from antonblanchard/misc
Some misc updates
5 years ago
Benjamin Herrenschmidt 9961d70dfb Improve PLL/MMCM clocks configuration
We can now pass both the input clock and target clock frequency
via generics. Add support for both 50Mhz and 100Mhz target freqs
for both cases.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 5f28109957 Don't reset JTAG request register asynchronously
There's no point and it causes Vivado to spew a pile of warnings

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 48e6e719d3 Multiply needs to be 16 stages to fix all timing issues
This seems dependent on the FPGA type/size, so we should probably
make it a toplevel generic, but for now this helps on the
Arty A7-35

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Paul Mackerras 9789d258fb loadstore2: Do data formatting after a register stage
This moves the data formatting for read data to after a register,
instead of before, in order to improve timing.  The data formatting
is now effectively combinational logic on the input side of the
writeback stage.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Benjamin Herrenschmidt 492bf06740 corefile: Remove duplicate wishbone_debug_master
It's both in core and soc, it should only be in the latter

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago