A tiny Open POWER ISA softcore written in VHDL 2008
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Go to file
Michael Neuling cf6d57b803
Merge pull request #399 from ozbenh/misc
Fix PLRU
2 years ago
.github/workflows
constraints
fpga Remove option for "short" 16x16 bit multiplier 2 years ago
hello_world Zero BSS in hello world test 2 years ago
include
lib
litedram litedram: Regenerate 2 years ago
liteeth
litesdcard litesdcard: Fix and regenerate Verilog 2 years ago
media
micropython
openocd
rust_lib_demo
scripts icache: Log 36 bits of instruction rather than 32 2 years ago
sim-unisim
tests tests: Update metavalues test count 2 years ago
uart16550 Add uart16550 files from fusesoc 4 years ago
verilator
.gitignore Add litesdcard/build to gitignore 2 years ago
LICENSE
Makefile execute1: Add a pipelined 33-bit signed multiplier 2 years ago
README.md
cache_ram.vhdl dcache: Reduce metavalue warnings 2 years ago
common.vhdl Change the multiplier interface to support signed multipliers 2 years ago
control.vhdl
core.vhdl Remove option for "short" 16x16 bit multiplier 2 years ago
core_debug.vhdl core_debug: Reduce metavalue warnings 2 years ago
core_dram_tb.vhdl
core_flash_tb.vhdl
core_tb.vhdl
countbits.vhdl
countbits_tb.vhdl
cr_file.vhdl
crhelpers.vhdl
dcache.vhdl dcache: Reduce metavalue warnings 2 years ago
dcache_tb.vhdl
decode1.vhdl Pre-decode instructions when writing them to icache 2 years ago
decode2.vhdl decode2: Reduce metavalue warnings 2 years ago
decode_types.vhdl predecode: Add more comments to row_predecode_rom and insn_code values 2 years ago
divider.vhdl
divider_tb.vhdl
dmi_dtm_dummy.vhdl
dmi_dtm_ecp5.vhdl
dmi_dtm_tb.vhdl
dmi_dtm_xilinx.vhdl
dram_tb.vhdl
execute1.vhdl execute1: Reduce metavalue warnings 2 years ago
fetch1.vhdl fetch1: Fix bug where BTC entries don't match on MSR[IR] 2 years ago
foreign_random.vhdl
fpu.vhdl Change the multiplier interface to support signed multipliers 2 years ago
glibc_random.vhdl
glibc_random_helpers.vhdl
gpio.vhdl
helpers.vhdl Metavalue cleanup for helpers.vhdl 2 years ago
icache.vhdl icache: Reduce metavalue warnings 2 years ago
icache_tb.vhdl
icache_test.bin
insn_helpers.vhdl
loadstore1.vhdl loadstore1: Reduce metavalue warnings 2 years ago
logical.vhdl Finish off taking SPRs out of register file 2 years ago
microwatt.core Remove option for "short" 16x16 bit multiplier 2 years ago
mmu.vhdl Metavalue cleanup for mmu.vhdl 2 years ago
multiply-32s.vhdl Change the multiplier interface to support signed multipliers 2 years ago
multiply.vhdl Change the multiplier interface to support signed multipliers 2 years ago
multiply_tb.vhdl multiply_tb: Fix multiply_tb.vhdl for the new multiplier interface 2 years ago
nonrandom.vhdl
plru.vhdl Fix PLRU 2 years ago
plru_tb.vhdl Fix PLRU 2 years ago
pmu.vhdl Metavalue cleanup for pmu.vhdl 2 years ago
ppc_fx_insns.vhdl
predecode.vhdl predecode: Add more comments to row_predecode_rom and insn_code values 2 years ago
random.vhdl
register_file.vhdl Metavalue cleanup for register_file.vhdl 2 years ago
rotator.vhdl Metavalue cleanup for rotator.vhdl 2 years ago
rotator_tb.vhdl
run.py
sim_16550_uart.vhdl
sim_bram.vhdl
sim_bram_helpers.vhdl
sim_bram_helpers_c.c
sim_console.vhdl
sim_console_c.c
sim_jtag.vhdl
sim_jtag_socket.vhdl
sim_jtag_socket_c.c
sim_no_flash.vhdl
sim_pp_uart.vhdl
sim_vhpi_c.c
sim_vhpi_c.h
soc.vhdl Remove option for "short" 16x16 bit multiplier 2 years ago
spi_flash_ctrl.vhdl
spi_rxtx.vhdl
sync_fifo.vhdl
syscon.vhdl
utils.vhdl
wishbone_arbiter.vhdl
wishbone_bram_tb.bin
wishbone_bram_tb.vhdl
wishbone_bram_wrapper.vhdl
wishbone_debug_master.vhdl
wishbone_types.vhdl
writeback.vhdl writeback: Eliminate unintentional inferred latch 2 years ago
xics.vhdl xics: Fix -Whide warnings 2 years ago
xilinx-mult-32s.vhdl Change the multiplier interface to support signed multipliers 2 years ago
xilinx-mult.vhdl Change the multiplier interface to support signed multipliers 2 years ago

README.md

Microwatt

Microwatt

A tiny Open POWER ISA softcore written in VHDL 2008. It aims to be simple and easy to understand.

Simulation using ghdl

MicroPython running on Microwatt

You can try out Microwatt/Micropython without hardware by using the ghdl simulator. If you want to build directly for a hardware target board, see below.

  • Build micropython. If you aren't building on a ppc64le box you will need a cross compiler. If it isn't available on your distro grab the powerpc64le-power8 toolchain from https://toolchains.bootlin.com. You may need to set the CROSS_COMPILE environment variable to the prefix used for your cross compilers. The default is powerpc64le-linux-gnu-.
git clone https://github.com/micropython/micropython.git
cd micropython
cd ports/powerpc
make -j$(nproc)
cd ../../../

A prebuilt micropython image is also available in the micropython/ directory.

  • Microwatt uses ghdl for simulation. Either install this from your distro or build it. Microwatt requires ghdl to be built with the LLVM or gcc backend, which not all distros do (Fedora does, Debian/Ubuntu appears not to). ghdl with the LLVM backend is likely easier to build.

    If building ghdl from scratch is too much for you, the microwatt Makefile supports using Docker or Podman.

  • Next build microwatt:

git clone https://github.com/antonblanchard/microwatt
cd microwatt
make

To build using Docker:

make DOCKER=1

and to build using Podman:

make PODMAN=1
  • Link in the micropython image:
ln -s ../micropython/ports/powerpc/build/firmware.bin main_ram.bin

Or if you were using the pre-built image:

ln -s micropython/firmware.bin main_ram.bin
  • Now run microwatt, sending debug output to /dev/null:
./core_tb > /dev/null

Synthesis on Xilinx FPGAs using Vivado

  • Install Vivado (I'm using the free 2019.1 webpack edition).

  • Setup Vivado paths:

source /opt/Xilinx/Vivado/2019.1/settings64.sh
  • Install FuseSoC:
pip3 install --user -U fusesoc

Fedora users can get FuseSoC package via

sudo dnf copr enable sharkcz/danny
sudo dnf install fusesoc
  • If this is your first time using fusesoc, initialize fusesoc. This is needed to be able to pull down fussoc library components referenced by microwatt. Run
fusesoc init
fusesoc fetch uart16550
fusesoc library add microwatt /path/to/microwatt
  • Build using FuseSoC. For hello world (Replace nexys_video with your FPGA board such as --target=arty_a7-100): You may wish to ensure you have installed Digilent Board files or appropriate files for your board first.
fusesoc run --target=nexys_video microwatt --memory_size=16384 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex

You should then be able to see output via the serial port of the board (/dev/ttyUSB1, 115200 for example assuming standard clock speeds). There is a know bug where initial output may not be sent - try the reset (not programming button) on your board if you don't see anything.

  • To build micropython (currently requires 1MB of BRAM eg an Artix-7 A200):
fusesoc run --target=nexys_video microwatt

Linux on Microwatt

Mainline Linux supports Microwatt as of v5.14. The Arty A7 is the best tested platform, but it's also been tested on the OrangeCrab and ButterStick.

  1. Use buildroot to create a userspace

    A small change is required to glibc in order to support the VMX/AltiVec-less Microwatt, as float128 support is mandiatory and for this in GCC requires VSX/AltiVec. This change is included in Joel's buildroot fork, along with a defconfig:

    git clone -b microwatt https://github.com/shenki/buildroot
    cd buildroot
    make ppc64le_microwatt_defconfig
    make
    

    The output is output/images/rootfs.cpio.

  2. Build the Linux kernel

    git clone https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
    cd linux
    make ARCH=powerpc microwatt_defconfig
    make ARCH=powerpc CROSS_COMPILE=powerpc64le-linux-gnu- \
      CONFIG_INITRAMFS_SOURCE=/buildroot/output/images/rootfs.cpio -j`nproc`
    

    The output is arch/powerpc/boot/dtbImage.microwatt.elf.

  3. Build gateware using FuseSoC

    First configure FuseSoC as above.

    fusesoc run --build --target=arty_a7-100 microwatt --no_bram --memory_size=0
    

    The output is build/microwatt_0/arty_a7-100-vivado/microwatt_0.bit.

  4. Program the flash

    This operation will overwrite the contents of your flash.

    For the Arty A7 A100, set FLASH_ADDRESS to 0x400000 and pass -f a100.

    For the Arty A7 A35, set FLASH_ADDRESS to 0x300000 and pass -f a35.

    microwatt/openocd/flash-arty -f a100 build/microwatt_0/arty_a7-100-vivado/microwatt_0.bit
    microwatt/openocd/flash-arty -f a100 dtbImage.microwatt.elf -t bin -a $FLASH_ADDRESS
    
  5. Connect to the second USB TTY device exposed by the FPGA

    minicom -D /dev/ttyUSB1
    

    The gateware has firmware that will look at FLASH_ADDRESS and attempt to parse an ELF there, loading it to the address specified in the ELF header and jumping to it.

Testing

  • A simple test suite containing random execution test cases and a couple of micropython test cases can be run with:
make -j$(nproc) check

Issues

  • There are a few instructions still to be implemented:
    • Vector/VMX/VSX