Commit Graph

1283 Commits (fd8c0000c03c00be91aee83f578ccf18ccbcb5bb)
 

Author SHA1 Message Date
Paul Mackerras fd8c0000c0 Implement set[n]bc[r] instructions
This implements the setbc, setnbc, setbcr and setnbcr instructions.
Because the insn_type_t type already has 64 elements, this uses the
existing OP_SETB for the new instructions, and has execute1 compute
different results depending on bits 6-9 of the instruction.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
1 year ago
Paul Mackerras 7c5a2bcaf4 tests: Add a test for prefixed instructions
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
1 year ago
Paul Mackerras c4492c843a Implement interrupts for prefixed instructions
This arranges to generate an illegal instruction type program
interrupt for illegal prefixed instructions, that is, those where the
suffix is not a legal value given the prefix, or the prefix has a
reserved value in the subtype field.  This implementation doesn't
generate an interrupt for the invalid 8LS:D and MLS:D instruction
forms where R = 1 and RA != 0.  (In those cases it uses (RA) as the
addend, i.e. it ignores the R bit.)

This detects the case where the address of an instruction prefix is
equal mod 64 to 60, and generates an alignment interrupt in that case.

This also arranges to set bit 34 of SRR1 when an interrupt occurs due
to a prefixed instruction, for those interrupts where that is required
(i.e. trace, alignment, floating-point unavailable, data storage, data
segment, and most cases of program interrupt).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
1 year ago
Paul Mackerras 39ca675ce3 Decode prefixed instructions
This adds logic to do basic decoding of the prefixed instructions
defined in PowerISA v3.1B which are in the SFFS (Scalar Fixed plus
Floating-Point Subset) compliancy subset.  In PowerISA v3.1B SFFS,
there are 14 prefixed load/store instructions plus the prefixed no-op
instruction (pnop).  The prefixed load/store instructions all use an
extended version of D-form, which has an extra 18 bits of displacement
in the prefix, plus an 'R' bit which enables PC-relative addressing.

When decode1 sees an instruction word where the insn_code is
INSN_prefix (i.e. the primary opcode was 1), it stores the prefix word
and sends nothing down to decode2 in that cycle.  When the next valid
instruction word arrives, it is interpreted as a suffix, meaning that
its insn_code gets modified before being used to look up the decode
table.

The insn_code values are rearranged so that the values for
instructions which are the suffix of a valid prefixed instruction are
all at even indexes, and the corresponding prefixed instructions
follow immediately, so that an insn_code value can be converted to the
corresponding prefixed value by setting the LSB of the insn_code
value.  There are two prefixed instructions, pld and pstd, for which
the suffix is not a valid SFFS instruction by itself, so these have
been given dummy insn_code values which decode as illegal (INSN_op57
and INSN_op61).

For a prefixed instruction, decode1 examines the type and subtype
fields of the prefix and checks that the suffix is valid for the type
and subtype.  This check doesn't affect which entry of the decode
table is used; the result is passed down to decode2, and will in
future be acted upon in execute1.

The instruction address passed down to decode2 is the address of the
prefix.  To enable this, part of the instruction address is saved when
the prefix is seen, and then the instruction address received from
icache is partly overlaid by the saved prefix address.  Because
prefixed instructions are not permitted to cross 64-byte boundaries,
we only need to save bits 5:2 of the instruction to do this.  If the
alignment restriction ever gets relaxed, we will then need to save
more bits of the address.

Decode2 has been extended to handle the R bit of the prefix (in 8LS
and MLS forms) and to be able to generate the 34-bit immediate value
from the prefix and suffix.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
1 year ago
Paul Mackerras 7af0e001ad Move insn_codes for mcrfs, mtfsb0/1 and mtfsfi
This moves the insn_code values for mcrfs, mtfsb0/1 and mtfsfi into
the region used for floating-point instructions.  This means that in
no-FPU implementations, they will get turned into illegal instructions
in predecode.  We then don't need the code in execute1 that makes FP
instructions illegal in no-FPU implementations.

We also remove the NONE value for unit_t, since it was only ever used
with insn_type = OP_ILLEGAL, and the check for unit = NONE was
redundant with the check for insn_type = OP_ILLEGAL.  Thus the check
for unit = NONE is no longer needed and is removed here.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
1 year ago
Paul Mackerras 4416ebe92e fetch1: Change the way predictions from the BTC are sent downstream
Instead of sending down the predicted taken/not-taken bits with the
target of the branch, we now send them down with the branch itself.
Previously icache adjusted for this by sending the prediction bits to
decode1 without a 1-clock delay while everything else had a 1-clock
delay.  Now icache keeps the prediction bits with the rest of the
attributes for the request.

Also fix a buglet in fetch1 where the first address sent out after
reset didn't have .req set.  Currently this doesn't cause a problem
because icache doesn't really look at .req.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
1 year ago
Anton Blanchard 83dcfeabf8
Merge pull request #417 from kraigher/master
Add VHDL-LS language server configuration
2 years ago
Olof Kraigher 341a507486 Add vhdl_ls.toml dump to run.py
Signed-off-by: Olof Kraigher <olof.kraigher@gmail.com>
2 years ago
Michael Neuling da5d3ded3c
Merge pull request #409 from CodeConstruct/dev/soc-reset
Make syscon SOC reset work
2 years ago
Matt Johnston 56f1c41e9c arty: Add software reset from syscon
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Matt Johnston 1f5a2e8aaa soc: Expose sw_soc_reset for syscon reset
The soc itself will be reset when a syscon soc reset is triggered.

Separately, top- board files can use the sw_soc_rst signal
if they need to reset other peripherals

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Matt Johnston 89d8cf0788 Regenerate litedram with updated sdram init
Using

litedram c770dd62edc281c370f9e2c694fe4ac1525a0b4a
litex e570b612b2a9d8f8d2002d79497bda0dc35b936a

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Matt Johnston 1874cad5b7 litedram: only run sdram init at first boot
Subsequent boots can skip the dram configuration, it will already
be in a usable state.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Matt Johnston 4bd45af739 Move alt_reset to syscon
Instead of connecting core_alt_reset to litedram init_done, it moves to
a syscon register bit. This simplifies top- files and future soc_reset
handling. sdram main.c can unset the alt_reset bit after sdram init.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Matt Johnston dfecda3a5f bin2hex: handle any file length, not just 8 or 4
Treat the input as if it was padded with zeroes to a multiple
of 8. This is needed if the .data in a binary changes size, it
won't be a nice multiple of 4 or 8. At present the microwatt
binaries all are multiples of 8, but making code alterations could make
bin2hex fail unexpectedly.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
2 years ago
Michael Neuling 7d928200b8
Merge pull request #415 from ozbenh/uart16550-core
Bundle the uart16550 core file
2 years ago
Michael Neuling 964b97e85c
Merge pull request #414 from ozbenh/misc
Fixup plru_tb to use the new plrufn, take out the old plru and vunit test misc changes
2 years ago
Benjamin Herrenschmidt d299ea925e Bundle the uart16550 core file
We already carry the UART verilog source, so we may as well use it
instead of requiring fusesoc to import it from its library

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Benjamin Herrenschmidt 6068b635ae Fix plru_tb to use the new plrufn and take out the old plru.vhdl
This reworks (and simplifies) plru_tb to use the new plrufn module
instead of the old (and now unused) plru module.

The latter is now removed completely.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Michael Neuling 432d9f3150
Merge pull request #413 from ozbenh/fix-io-bridge-qw-store
soc: Fix issues with 64-bit stores to IO bridge
2 years ago
Benjamin Herrenschmidt 4e32dcff80 Clean vunit_out on make clean
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Benjamin Herrenschmidt 41328306f3 Add shebang to run.py
It's useful to run the vunit tests by hand, this makes it easier

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Benjamin Herrenschmidt 3f788e87dc soc: Fix issues with 64-bit stores to IO bridge
The IO bridge would latch the top half of write data and selection signals
when issuing the second downstream store. Unfortunately at this point the
bridge has already "accepted" the upstream store from the core (due to
stall being 0 on the cycle when stb/cyc are 1), so the values on the
wishbone signals aren't stable and might already reflect a subsequent
wishbone command.

This causes occasional data corruption of 64-bit stores through the IO
bridge.

While at it, take out a bunch of useless conditions on the data latch
path. It doesn't matter whether we is 0 or 1, we can just always latch
the data, the destination will decide whether to use the content or not,
which should save a bit of hardware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Paul Mackerras 413f2dc5d6
Merge pull request #411 from ozbenh/dcache-plru-update-fix
Dcache PLRU update fix
2 years ago
Benjamin Herrenschmidt 76f61ef823 dcache: Update PLRU on misses as well as hits
The current dcache will not update the PLRU on a cache miss which is later
satisfied during the reload process. Thus subsequent misses will potentially
evict the same cache line. The same issue happens with dcbz which are
treated more/less as load misses.

This fixes it by triggering a PLRU update when r1.choose_victim, which is
set on a miss for one cycle to snapshot the PLRU output. This means we will
update the PLRU on the same cycle as we capture its output, which is fine
(the new value will be visible on the next cycle).

That way, a "miss" will result in a PLRU update to reflect that the entry
being refilled is actually used (and will be used to serve subsequent
load operations from the same cache line while being refilled).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Benjamin Herrenschmidt 3edbbf5f18 Fix dcache_tb (and add dump of victim way to dcache)
It bitrotted... more signals need to be initialized. This also adds
a lot more accesses with different timing conditions allowing to
test cases of hit during reloads, hit with reload formward, hit on idle
cache etc...

It also exposes a bug where the cache miss caused by the read of 0x140
uses the same victim way as previous cache miss of 0x40 (same index).

This bug will need to be fixed separately, but at least this exposes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Michael Neuling 84a0fba25d
Merge pull request #408 from paulusmack/plru-improvement
PLRU improvements
2 years ago
Michael Neuling 5766dbab37
Merge pull request #406 from shingarov/spi-kintex
Add support for flashing the s25fl256s onboard Genesys2
2 years ago
Michael Neuling d9c55defdb
Merge pull request #407 from shingarov/openocd-012
Recognize version string "0.12" in recent OpenOCD master
2 years ago
Boris Shingarov ed5807381e Recognize version string "0.12" in recent OpenOCD master
Starting from 5e7612eb4, OpenOCD identifies itself as 0.12.
This causes Microwatt's flash-arty script to fail.  Because neither
the cfg nor the proxy bitstream are affected, we can keep treating
everything as indistinguishable from 0.11.  This patch simply tests
for "0.12" as an alias; it would probably be better to replace this
confusing terminology with something like "single-tap/multi-tap".

Signed-off-by: Boris Shingarov <shingarov@labware.com>
2 years ago
Boris Shingarov 6c3f7d75d5 Add support for flashing the s25fl256s onboard Genesys2
This includes the cable configuration, additions to the Python script,
and the jtagspi proxy bitstream. The single-tap version is not included
because 0.10 supported only 3-byte addresses which is unusable on the
s25fl256s anyway.

Signed-off-by: Boris Shingarov <shingarov@labware.com>
2 years ago
Paul Mackerras b8f9c833f8 litedram: Split L2 PLRU into storage and logic
As has been done for the L1 dcache and icache, this puts the L2 cache
PLRU state into a little RAM and has a single copy of the logic to
calculate the pseudo-LRU way and update the PLRU state.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Paul Mackerras a1f5867919 dcache: Split PLRU into storage and logic
Rather than having update and decode logic for each individual PLRU
as well as a register to store the current PLRU state, we now put the
PLRU state in a little RAM, which will typically use LUT RAM on FPGAs,
and have just a single copy of the logic to calculate the pseudo-LRU
way and to update the PLRU state.

The PLRU RAM that apples to the data storage (as opposed to the TLB)
is read asynchronously in the cycle after the cache tag matching is
done.  At the end of that cycle the PLRU RAM entry is updated if the
access was a cache hit, or a victim way is calculated and stored if
the access was a cache miss.  It is possible that a cache miss doesn't
start being handled until later, in which case the stored victim way
is used later when the miss gets handled.

Similarly for the TLB PLRU, the RAM is read asynchronously in the
cycle after a TLB lookup is done, and either updated at the end of
that cycle (for a hit), or a victim is chosen and stored for when the
TLB miss is satisfied.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Paul Mackerras 86212dc879 icache: Split PLRU into storage and logic
Rather than having update and decode logic for each individual PLRU
as well as a register to store the current PLRU state, we now put the
PLRU state in a little RAM, which will typically use LUT RAM on FPGAs,
and have just a single copy of the logic to calculate the pseudo-LRU
way and to update the PLRU state.  This logic is in the plrufn module
and is just combinatorial logic.  A new module was created for this as
other parts of the system are still using plru.vhdl.

The PLRU RAM in the icache is read asynchronously in the cycle
after the cache tag matching is done.  At the end of that cycle the
PLRU RAM entry is updated if the access was a cache hit, or a victim
way is calculated and stored if the access was a cache miss and
miss handling is starting in this cycle.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Anton Blanchard d3fb2639dd
Merge pull request #403 from mikey/litedram-warnings
Fix litedram wrapper build warnings and metavalues
2 years ago
Paul Mackerras cd2e174113 dcache: Fix compilation with NUM_WAYS and/or TLB_NUM_WAYS = 1
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Paul Mackerras 82c8b2eae0 icache: Fix compilation with NUM_WAYS = 1
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Michael Neuling 24d04ed8f9 Fix litedram wrapper build warnings and metavalues
This fixes a couple of build warnings in litedram-wrapper-l2.vhdl

litedram/extras/litedram-wrapper-l2.vhdl:552:17⚠️ declaration of "i" hides constant "i" [-Whide]
            for i in 0 to ROW_SIZE-1 loop
                ^
litedram/extras/litedram-wrapper-l2.vhdl:1129:9⚠️ declaration of "litedram_trace" hides generic "litedram_trace" [-Whide]
        litedram_trace: litedram_trace_stub;
        ^

It also cleans up the runtime metavalue warnings

Signed-off-by: Michael Neuling <mikey@neuling.org>
2 years ago
Michael Neuling 047f739b58
Merge pull request #402 from ozbenh/misc
Fix core_dram_tb and dram_tb
2 years ago
Benjamin Herrenschmidt 39c2abae51 Fix build of core_dram_tb and dram_tb and fix tracing
We disabled --trace by default, so we need to stop linking verilated_vcd_c.o
as it doesn't exist in that case.

While at it, make a Makefile variable to enable/disable verilator tracing
and add a couple of generics to those test benches to control tracing
in the L2 and in litedram.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Benjamin Herrenschmidt e31a4f7a9a Ignore vunit_out in git
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2 years ago
Michael Neuling cb11ad8e64
Merge pull request #401 from shenki/dcscm
Add Antmicro Artix DC-SCM support
2 years ago
Joel Stanley ad858995aa openocd: Add Artix DC-SCM cable type
The Antmicro Artix DC-SCM uses the following FTDI part:

 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC

To use:

 $ openocd/flash-arty -c antmicro-artix-dc-scm -f a100 -t bin -a 0x300000 ~/u-boot

Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago
Joel Stanley 13aa52dfa7 antmicro-artix-dc-scm: Add liteeth
As with the DRAM configuration, the DC-SCM board uses the same PHY as
the Nexys Video and works with it's generated VHDL.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago
Joel Stanley e2ae325d5c antmicro-artix-dc-scm: Add Ethernet pins
Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago
Joel Stanley 87a875b940 antmicro-artix-dc-scm: Enable SPI flash
Load from 3MB as the flash is only 4MB on this board.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago
Joel Stanley 7065434652 antmicro-artix-dc-scm: Formatting to match top-arty
Make it easier to follow what needs to be updated.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago
Joel Stanley 621da8106f antmicro-artix-dc-scm: Add SPI flash pins
Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago
Joel Stanley fdc44a71a0 antmicro-artix-dc-scm: Update DRAM properties
Most pins are set to SSTL15, but litex generates SSTL135.

This should silence a vivado warning.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago
Paul Mackerras 9b184ff569 antmicro-artix-dc-scm: Add DRAM support
This uses the exact same gateware as the nexys video, since the DRAM
connection is identical to the nexys video down to the pin assignments
on the FPGA.  The only minor difference is that the DRAM chip on the
dc-scm is a MT41K256M16TW vs. a ...HA part on the nexys video.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[joel: rebase and tweaks]
Signed-off-by: Joel Stanley <joel@jms.id.au>
2 years ago