Commit Graph

684 Commits (fc4e13ae67ef7d49480cd0095850814c0d040583)
 

Author SHA1 Message Date
Paul Mackerras 04ec2115ad hello_world: Use ldcix/stdcix to access UART
This is one step towards ultimately removing the address-based
cache inhibit hack from dcache.vhdl.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras abefafd70b hello_world: Adjust header inclusions and Makefile
Currently hello_world fails to build with distro cross compiler
packages such as Debian gcc-powerpc64-linux-gnu, because it doesn't
provide string.h or unistd.h.  In fact we don't need them, we just
need stddef.h.  This adds #include <stddef.h> to console.h to get
size_t defined.  We also add #include "console.h" to console.c.

The hello_world Makefile currently hard-codes CROSS_COMPILE on
non-PPC machines.  This means that a command like:

	$ CROSS_COMPILE=powerpc64le-linux-gnu- make

doesn't do what you expect; it just tries to use powerpc64le-linux-gcc
regardless.  Adding a '?' makes it do what one expects.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Anton Blanchard d3291dbdf0
Merge pull request #155 from mikey/exceptions
Add decrementer, illegal and system call exceptions
5 years ago
Michael Neuling 9d7df2d507 Add test cases for new exceptions and supervisor state
This adds test cases for:
- sc, illegals and decrementer exceptions
- decrementer overflow
- rfid
- mt/mf sprg0/1 srr0/1
- mtdec
- mtmsrd
- sc

It also adds these test cases to make check/check_light

Signed-off-by: Michael Neuling <mikey@neuling.org>
5 years ago
Michael Neuling 5ef5604b65 Add sc, illegal and decrementer exceptions and some supervisor state
This adds the following exceptions:
 - 0x700 program check (for illegal instructions)
 - 0x900 decrementer
 - 0xc00 system call

This also adds some supervisor state:
 - decremeter
 - msr
(SPRG0/1 and SRR0/1 already exist as fast SPRs)

It also adds some supporting instructions:
 - rfid
 - mtmsrd
 - mfmsr
 - sc

MSR state is added but only EE is used in this patch set. Other bits
are read/written but are not used at all.

This adds a 2 stage state machine to execute1.vhdl. This state machine
allows fast SPRS SRR0/1 to be written in different cycles. This state
machine can be extended later to add DAR and DSISR SPR writing for
more complex exceptions like page faults.

Signed-off-by: Michael Neuling <mikey@neuling.org>
5 years ago
Michael Neuling 594a19de37 Plumb attn instruction through to execute1
Currently we decode attn but we just mark it as an illegal.

This adds a separate case statement in execute 1 for attn to terminate
the core. Illegals also do this currently but we are soon implementing
a 0x700 execption for them.

Signed-off-by: Michael Neuling <mikey@neuling.org>
5 years ago
Michael Neuling 96fbd61de8 Breakout the console code so it can be reused.
No functional change.

Signed-off-by: Michael Neuling <mikey@neuling.org>
5 years ago
Anton Blanchard 8bee4ae3cc
Merge pull request #153 from paulusmack/master
Load/store improvements
5 years ago
Paul Mackerras 81369187c0 loadstore1: Add support for cache-inhibited load and store instructions
This adds support for lbzcix, lhzcix, lwzcix, ldcix, stbcix, sthcix,
stwcix and stdcix.  The temporary hack where accesses to addresses of
the form 0xc??????? are made non-cacheable is left in for now to avoid
making existing programs non-functional.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 4e38c2cc21 loadstore1: Move load data formatting from writeback to loadstore1
This puts all the data formatting (byte rotation based on lowest three
bits of the address, byte reversal, sign extension, zero extension)
in loadstore1.  Writeback now simply sends the data provided to the
register files.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras b349cc891a loadstore1: Move logic from dcache to loadstore1
So that the dcache could in future be used by an MMU, this moves
logic to do with data formatting, rA updates for update-form
instructions, and handling of unaligned loads and stores out of
dcache and into loadstore1.  For now, dcache connects only to
loadstore1, and loadstore1 now has the connection to writeback.

Dcache generates a stall signal to loadstore1 which indicates that
the request presented in the current cycle was not accepted and
should be presented again.  However, loadstore1 doesn't currently
use it because we know that we can never hit the circumstances
where it might be set.

For unaligned transfers, loadstore1 generates two requests to
dcache back-to-back, and then waits to see two acks back from
dcache (cycles where d_in.valid is true).

Loadstore1 now has a FSM for tracking how many acks we are
expecting from dcache and for doing the rA update cycles when
necessary.  Handling for reservations and conditional stores is
still in dcache.

Loadstore1 now generates its own stall signal back to decode2,
so we no longer need the logic in execute1 that generated the stall
for the first two cycles.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Anton Blanchard cc20989bda
Merge pull request #152 from mikey/gitignore
gitignore: Fix RAM file name
5 years ago
Paul Mackerras ef9c1efd72 dcache: Remove LOAD_UPDATE2 state
Since we removed one cycle from the load hit case, we actually no
longer need the extra cycle provided by having the LOAD_UPDATE
state.  Therefore this makes the load hit case in the IDLE and
NEXT_DWORD states go to LOAD_UPDATE2 rather than LOAD_UPDATE.
Then we remove LOAD_UPDATE and then rename LOAD_UPDATE2 to
LOAD_UPDATE.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 81d777be02 dcache: Trim one cycle from the load hit path
Currently we don't get the result from a load that hits in the dcache
until the fourth cycle after the instruction was presented to
loadstore1.  This trims this back to 3 cycles by taking the low order
bits of the address generated in loadstore1 into dcache directly (not
via the output register of loadstore1) and using them to address the
read port of the dcache data RAM.  We use the lower 12 address bits
here in the expectation that any reasonable data cache design will
have a set size of 4kB or less in order to avoid the aliasing problems
that can arise with a virtually-indexed physically-tagged cache if
the set size is greater than the smallest page size provided by the
MMU.

With this we can get rid of r2 and drive the signals going to
writeback from r1, since the load hit data is now available one
cycle earlier.  We need a multiplexer on the read address of the
data cache RAM in order to handle the second doubleword of an
unaligned access.

One small complication is that we now need an extra cycle in the case
of an unaligned load which misses in the data cache and which reads
the 2nd-last and last doublewords of a cache line.  This is the reason
for the PRE_NEXT_DWORD state; if we just go straight to NEXT_DWORD
then we end up having the write of the last doubleword of the cache
line and the read of that same doubleword occurring in the same
cycle, which means we read stale data rather than the just-fetched
data.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Michael Neuling 54a399f162 gitignore: Fix RAM file name
From:
    commit 8e0389b973
    Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
    Date:   Wed Oct 23 12:08:55 2019 +1100
    ram: Rework main RAM interface

We need to change the name.

Signed-off-by: Michael Neuling <mikey@neuling.org>
5 years ago
Paul Mackerras 5d85ede97d dcache: Implement load-reserve and store-conditional instructions
This involves plumbing the (existing) 'reserve' and 'rc' bits in
the decode tables down to dcache, and 'rc' and 'store_done' bits
from dcache to writeback.

It turns out that we had 'RC' set in the 'rc' column for several
ordinary stores and for the attn instruction.  This corrects them
to 'NONE', and sets the 'rc' column to 'ONE' for the conditional
stores.

In writeback we now have logic to set CR0 when the input from dcache
has rc = 1.

In dcache we have the reservation itself, which has a valid bit
and the address down to cache line granularity.  We don't currently
store the reservation length.  For a store conditional which fails,
we set a 'cancel_store' signal which inhibits the write to the
cache and prevents the state machine from starting a bus cycle or
going to the STORE_WAIT_ACK state.  Instead we set r1.stcx_fail
which causes the instruction to complete in the next cycle with
rc=1 and store_done=0.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 94dd8bc480 dcache: Add support for unaligned loads and stores
For an unaligned load or store, we do the first doubleword (dword) of
the transfer as normal, but then go to a new NEXT_DWORD state of the
state machine to do the cache tag lookup for the second dword of the
transfer.  From the NEXT_DWORD state we have much the same transitions
to other states as from the IDLE state (the transitions for OP_LOAD_HIT
are a bit different but almost identical for the other op values).

We now do the preparation of the data to be written in loadstore1,
that is, byte reversal if necessary and rotation by a number of
bytes based on the low 3 bits of the address.  We do rotation not
shifting so we have the bytes that need to go into the second
doubleword in the right place in the low bytes of the data sent to
dcache.  The rotation and byte reversal are done in a single step
with one multiplexer per byte by setting the select inputs for each
byte appropriately.

This also fixes writeback to not write the register value until it
has received both pieces of an unaligned load value.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Anton Blanchard 44f53f6bda
Merge pull request #150 from sharkcz/selinux
make the sources volume mount SELinux friendly
5 years ago
Paul Mackerras 1587d9e6eb dcache: Fix obscure bug and minor cleanups
The obscure bug is that a non-cacheable load with update would never
do the update and would never complete the instruction.  This is fixed
by making state NC_LOAD_WAIT_ACK go to LOAD_UPDATE2 if r1.req.update
is set.

The slow load forms with update can go to LOAD_UPDATE2 at the end
rather than LOAD_UPDATE, thus saving a cycle.  Loads with a cache
hit need the LOAD_UPDATE state in the third cycle since they are
not writing back until the 4th cycle, when the state is LOAD_UPDATE2.
Slow loads (cacheable loads that miss and non-cacheable loads)
currently go to LOAD_UPDATE in the cycle after they see
r1.wb.ack = 1 for the last time, but that cycle is the cycle where
they write back, and the following cycle does nothing.  Going to
LOAD_UPDATE2 in those cases saves a cycle and makes them consistent
with the load hit case.

The logic in the RELOAD_WAIT_ACK case doesn't need to check
r1.req.load = '1' since we only ever use RELOAD_WAIT_ACK for loads.

There are also some whitespace fixes and a typo fix.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 1a244d3470 Remove single-issue constraint for most loads and stores
This removes the constraint that loads and stores are single-issue,
at the expense of a stall of at least 2 cycles for every load and
store.

To do this, we plumb the existing stall signal that was generated
in dcache to core, where it gets ORed with the stall signal from
execute1.  Execute1 generates a stall signal for the first two
cycles of each load and store, and dcache generates the stall
signal in the 3rd and subsequent cycles if it needs to.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 441160d865 execute1: Use truth table embedded in instruction for CR logical ops
It turns out that CR logical instructions have the truth table of
the operation embedded in the instruction word.  This means that we
can collect the two input operand bits into a 2-bit value and use
that as the index to select the appropriate bit from the instruction
word.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Dan Horák ab50c7710d make the sources volume mount SELinux friendly
Signed-off-by: Dan Horák <dan@danny.cz>
5 years ago
Anton Blanchard a2bf039a70
Merge pull request #147 from antonblanchard/diamond-1
Some Diamond fixes
5 years ago
Anton Blanchard 098f10136d Fix a Diamond issue in decode2
By using a temporary we avoid a build issue in Diamond.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 0de83edf2e Fix a Diamond build issue in writeback
Diamond doesn't like the "" & method of converting std_logic to a single bit
std_logic_vector. Thanks to Olof Kindgren for this patch.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 39596dc70a
Merge pull request #146 from antonblanchard/vhpi-cleanup
Consolidate VHPI code
5 years ago
Anton Blanchard 471c7e2197 Consolidate VHPI code
We had many copies of the VHPI marshalling/unmarshalling code.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 6a9bc46fcb
Merge pull request #145 from antonblanchard/sim_console-fix
sim_console: Use cfmakeraw() and add option for ctrl-c to exit sim
5 years ago
Anton Blanchard 817315a886 sim_console: Use cfmakeraw() and add option for ctrl-c to exit sim
No need to open code a bunch of random termios flags, use cfmakeraw().

Most of the time we want ctrl-c to exit the current simulation, so
make that the default.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard ace1d32ddb Update Makefile.synth after Paul's patches
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard f77b31a552
Merge pull request #134 from paulusmack/master
Add bypass from execute1 output to input
5 years ago
Anton Blanchard d876484229
Merge pull request #142 from antonblanchard/ghdl-synthesis-3
Initial support for ghdl synthesis
5 years ago
Anton Blanchard 4508182fe1
Merge pull request #144 from antonblanchard/update-README
Add some information about GHDL backend issues
5 years ago
Anton Blanchard d1166e9c26
Merge pull request #143 from antonblanchard/use-docker
Add an option to use Docker
5 years ago
Anton Blanchard 5f2efde644 Add some information about GHDL backend issues
A number of people have tripped up on GHDL backend issues. We
require either the LLVM or gcc backend, because the mcode backend
can't link against libraries which we use for simulated memory
and UART. Make that clearer, and point people at the Docker images
if they are having issues building ghdl.

Also point at the prebuilt micropython image.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard c18830a5e5 Add an option to use Docker
Some distros don't have a version of ghdl with the  LLVM or GCC backend,
so add a Docker image as an alternative.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard db937403ec Initial support for ghdl synthesis
A first pass at ghdl synthesis using yosys and nextpnr. It runs hello world
or micropython if the FPGA has enough block RAM (eg ECP5 85F). The hello
world testcase also loops UART rx to tx in software (ie not a hardware
loopback).

It uses Docker images, so no software needs to be installed. If you prefer
podman you can use that too. Edit Makefile.synth to configure your FPGA,
JTAG device etc.

To build:

make -f Makefile.synth

and to program:

make -f Makefile.synth prog

A few issues:

We need to add PLL support. Right now Microwatt runs at whatever the
external clock frequency is and the baud rate gets scaled by how far off
50MHz it is. This means on the ecp5-evn with a 12 MHz clock rate the baud
rate is a quite strange 27650 (115200 * 50 / 12). On my OrangeCrab with a
50MHz clock the UART is 115200.

It uses a large amount of resources, way more than it should. There are
still some ghdl/yosys issues to be sorted out.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 21a40c2ba6
Merge pull request #140 from antonblanchard/rework-makefile
Fix Makefile dependency issue with files in vhdl/*
5 years ago
Anton Blanchard a4dbbfda4a Fix Makefile dependency issue with files in vhdl/*
GHDL doesn't seem to have a way to specify the location of the object
file it writes, so right now they are all ending up in the root
directory. The Makefile rules did not reflect that, so make would
continually the files in fpga/*

Fix the rules to match what GHDL is doing.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard d1643443d6
Merge pull request #141 from antonblanchard/update-dependencies.py
Improve dependencies.py and add a --synth option
5 years ago
Anton Blanchard d92f3da606 Improve dependencies.py and add a --synth option
dependencies.py was pretty terrible at actually determining
dependencies. This improves it and also adds a --synth option.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard ffca138b78
Merge pull request #136 from antonblanchard/uart-rx-metastability
Add a few FFs on the RX input to avoid metastability issues
5 years ago
Anton Blanchard 61d5e61f09 Add a few FFs on the RX input to avoid metastability issues
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 8569ae0ab1
Merge pull request #139 from antonblanchard/reduce-mem
Reduce mem
5 years ago
Anton Blanchard f5424f8e71 Reduce simulated and default FPGA RAM to 384kB
Micropython has been able to fit into 384kB for ages, so lets reduce our
simulated RAM. This is useful for testing if micropython will run on an
ECP5 85k, which has enough BRAM for 384kB but not enough for 512kB.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 488c30fe91 Add log2ceil and use it in bram code
We might want a non power of 2 amount of RAM in order to fit into an
FPGA, so create log2ceil and use it when calculating the number of
memory bits.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard b3dd31a978
Merge pull request #138 from antonblanchard/micropython-update
Update micropython
5 years ago
Anton Blanchard d0b5050ca4 Update micropython
The current version of micropython in tests/micropython.bin is ancient.
Bug #135 points out that more recent versions are much smaller and they
also handle restart when ctrl+D is pressed.

Save all three versions of the file (elf, bin and hex) in micropython/

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 4d3da0c7e6
Merge pull request #137 from antonblanchard/hello-world
hello_world updates
5 years ago
Anton Blanchard 75f3614776 hello_world updates
Shrink hello_world a bit (from 12kB to 8kB).
Include the built images
Add 0x10 and 0x100 entry points

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago