Commit Graph

63 Commits (120e1ce6ec208840c9fba401368277869820631a)

Author SHA1 Message Date
Anton Blanchard 89849a6856 Add a simple direct mapped icache
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Benjamin Herrenschmidt 3ac1dbc737 Share soc.vhdl between FPGA and sim
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt d21ef5836d Pass wishbone record to bram memory module
(And rename it to mw_soc_memory).

This makes soc.vhdl simpler and provides the same interface as
the simulated memory, which will help when sharing soc.vhdl
with sim later

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt a69a93b466 Split FPGA toplevel from soc
This will be useful when we start needing different toplevels for
different boards.

We keep the reset and clock generators in the toplevel as they will
eventually be taken over by litedram when we integrate it, and they
are more likely to change on different system types.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Anton Blanchard 270d7b1b9a Cmod A7-35 support
This adds support for the Digilane Cmod A7-35.

I had to use the MMCM because the clock (12 MHz) is below the PLL
minimum of 19 MHz.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 03fd06deaf Rework SOC reset
The old reset code was overly complicated and never worked properly.
Replace it with a simpler sequence that uses a couple of shift registers
to assert resets:

- Wait a number of external clock cycles before removing reset from
  the PLL.

- After the PLL locks and the external reset button isn't pressed,
  wait a number of PLL clock cycles before removing reset from the SOC.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 5e140298a5 Rework decode2
The decode2 stage was spaghetti code and needed cleaning up.
Create a series of functions to pull fields from a ppc instruction
and also a series of helpers to extract values for the execution
units.

As suggested by Paul, we should pass all signals to the execution
units and only set the valid signal conditionally, which should
use less resources.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 5379b805ec Arty A7 reset pin is C2
Use C2 for reset, and fix up a few whitespace issues.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
riktw 4ebd6fc1f7 Added support for building for Arty A7 boards 5 years ago
Olof Kindgren 12327034d6 Add and use plle2 primitive for nexys boards 5 years ago
Olof Kindgren b9bf19f912 Added synthesis target
The synth target can be used to analyze the core after synthesis
without running P&R. Currently, the only edalize backends that
support synthesis without P&R are vivado and icestorm, and icestorm
needs yosys built with verific support to parse vhdl.

To run synthesis only for a part, run

fusesoc run --target=synth --tool=vivado microwatt --part=<part>

where part is a valid Xilinx part such as xc7a100tcsg324-1
5 years ago
Olof Kindgren 250d09ed2d Add Nexys Video support 5 years ago
Olof Kindgren 5e56b14125 Add FuseSoC core description file with Nexys A7 support 5 years ago