|
|
|
library ieee;
|
|
|
|
use ieee.std_logic_1164.all;
|
|
|
|
use ieee.numeric_std.all;
|
|
|
|
|
|
|
|
library work;
|
|
|
|
use work.common.all;
|
|
|
|
use work.wishbone_types.all;
|
|
|
|
|
|
|
|
entity core is
|
|
|
|
generic (
|
|
|
|
SIM : boolean := false;
|
|
|
|
DISABLE_FLATTEN : boolean := false;
|
|
|
|
EX1_BYPASS : boolean := true;
|
|
|
|
ALT_RESET_ADDRESS : std_ulogic_vector(63 downto 0) := (others => '0');
|
|
|
|
LOG_LENGTH : natural := 512
|
|
|
|
);
|
|
|
|
port (
|
|
|
|
clk : in std_ulogic;
|
|
|
|
rst : in std_ulogic;
|
|
|
|
|
|
|
|
-- Alternate reset (0xffff0000) for use by DRAM init fw
|
|
|
|
alt_reset : in std_ulogic;
|
|
|
|
|
|
|
|
-- Wishbone interface
|
|
|
|
wishbone_insn_in : in wishbone_slave_out;
|
|
|
|
wishbone_insn_out : out wishbone_master_out;
|
|
|
|
|
|
|
|
wishbone_data_in : in wishbone_slave_out;
|
|
|
|
wishbone_data_out : out wishbone_master_out;
|
|
|
|
|
|
|
|
dmi_addr : in std_ulogic_vector(3 downto 0);
|
|
|
|
dmi_din : in std_ulogic_vector(63 downto 0);
|
|
|
|
dmi_dout : out std_ulogic_vector(63 downto 0);
|
|
|
|
dmi_req : in std_ulogic;
|
|
|
|
dmi_wr : in std_ulogic;
|
|
|
|
dmi_ack : out std_ulogic;
|
|
|
|
|
|
|
|
ext_irq : in std_ulogic;
|
|
|
|
|
|
|
|
terminated_out : out std_logic
|
|
|
|
);
|
|
|
|
end core;
|
|
|
|
|
|
|
|
architecture behave of core is
|
|
|
|
-- icache signals
|
|
|
|
signal fetch1_to_icache : Fetch1ToIcacheType;
|
|
|
|
signal icache_to_decode1 : IcacheToDecode1Type;
|
Add TLB to icache
This adds a direct-mapped TLB to the icache, with 64 entries by default.
Execute1 now sends a "virt_mode" signal from MSR[IR] to fetch1 along
with redirects to indicate whether instruction addresses should be
translated through the TLB, and fetch1 sends that on to icache.
Similarly a "priv_mode" signal is sent to indicate the privilege
mode for instruction fetches. This means that changes to MSR[IR]
or MSR[PR] don't take effect until the next redirect, meaning an
isync, rfid, branch, etc.
The icache uses a hash of the effective address (i.e. next instruction
address) to index the TLB. The hash is an XOR of three fields of the
address; with a 64-entry TLB, the fields are bits 12--17, 18--23 and
24--29 of the address. TLB invalidations simply invalidate the
indexed TLB entry without checking the contents.
If the icache detects a TLB miss with virt_mode=1, it will send a
fetch_failed indication through fetch2 to decode1, which will turn it
into a special OP_FETCH_FAILED opcode with unit=LDST. That will get
sent down to loadstore1 which will currently just raise a Instruction
Storage Interrupt (0x400) exception.
One bit in the PTE obtained from the TLB is used to check whether an
instruction access is allowed -- the privilege bit (bit 3). If bit 3
is 1 and priv_mode=0, then a fetch_failed indication is sent down to
fetch2 and to decode1, which generates an OP_FETCH_FAILED. Any PTEs
with PTE bit 0 (EAA[3]) clear or bit 8 (R) clear should not be put
into the iTLB since such PTEs would not allow execution by any
context.
Tlbie operations get sent from mmu to icache over a new connection.
Unfortunately the privileged instruction tests are broken for now.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
|
|
|
signal mmu_to_icache : MmuToIcacheType;
|
|
|
|
|
|
|
|
-- decode signals
|
|
|
|
signal decode1_to_decode2: Decode1ToDecode2Type;
|
|
|
|
signal decode1_to_fetch1: Decode1ToFetch1Type;
|
|
|
|
signal decode2_to_execute1: Decode2ToExecute1Type;
|
|
|
|
|
|
|
|
-- register file signals
|
|
|
|
signal register_file_to_decode2: RegisterFileToDecode2Type;
|
|
|
|
signal decode2_to_register_file: Decode2ToRegisterFileType;
|
|
|
|
signal writeback_to_register_file: WritebackToRegisterFileType;
|
|
|
|
|
|
|
|
-- CR file signals
|
|
|
|
signal decode2_to_cr_file: Decode2ToCrFileType;
|
|
|
|
signal cr_file_to_decode2: CrFileToDecode2Type;
|
|
|
|
signal writeback_to_cr_file: WritebackToCrFileType;
|
|
|
|
|
|
|
|
-- execute signals
|
|
|
|
signal execute1_to_writeback: Execute1ToWritebackType;
|
|
|
|
signal execute1_to_fetch1: Execute1ToFetch1Type;
|
|
|
|
|
|
|
|
-- load store signals
|
|
|
|
signal execute1_to_loadstore1: Execute1ToLoadstore1Type;
|
|
|
|
signal loadstore1_to_execute1: Loadstore1ToExecute1Type;
|
|
|
|
signal loadstore1_to_writeback: Loadstore1ToWritebackType;
|
|
|
|
signal loadstore1_to_mmu: Loadstore1ToMmuType;
|
|
|
|
signal mmu_to_loadstore1: MmuToLoadstore1Type;
|
|
|
|
|
|
|
|
-- dcache signals
|
|
|
|
signal loadstore1_to_dcache: Loadstore1ToDcacheType;
|
|
|
|
signal dcache_to_loadstore1: DcacheToLoadstore1Type;
|
|
|
|
signal mmu_to_dcache: MmuToDcacheType;
|
|
|
|
signal dcache_to_mmu: DcacheToMmuType;
|
|
|
|
|
|
|
|
-- local signals
|
|
|
|
signal fetch1_stall_in : std_ulogic;
|
|
|
|
signal icache_stall_out : std_ulogic;
|
|
|
|
signal icache_stall_in : std_ulogic;
|
|
|
|
signal decode1_stall_in : std_ulogic;
|
|
|
|
signal decode1_busy : std_ulogic;
|
|
|
|
signal decode2_busy_in : std_ulogic;
|
|
|
|
signal decode2_stall_out : std_ulogic;
|
|
|
|
signal ex1_icache_inval: std_ulogic;
|
|
|
|
signal ex1_busy_out: std_ulogic;
|
|
|
|
signal dcache_stall_out: std_ulogic;
|
|
|
|
|
|
|
|
signal flush: std_ulogic;
|
|
|
|
signal decode1_flush: std_ulogic;
|
|
|
|
signal fetch1_flush: std_ulogic;
|
|
|
|
|
|
|
|
signal complete: std_ulogic;
|
|
|
|
signal terminate: std_ulogic;
|
|
|
|
signal core_rst: std_ulogic;
|
|
|
|
signal icache_inv: std_ulogic;
|
|
|
|
|
|
|
|
-- Delayed/Latched resets and alt_reset
|
|
|
|
signal rst_fetch1 : std_ulogic := '1';
|
|
|
|
signal rst_fetch2 : std_ulogic := '1';
|
|
|
|
signal rst_icache : std_ulogic := '1';
|
|
|
|
signal rst_dcache : std_ulogic := '1';
|
|
|
|
signal rst_dec1 : std_ulogic := '1';
|
|
|
|
signal rst_dec2 : std_ulogic := '1';
|
|
|
|
signal rst_ex1 : std_ulogic := '1';
|
|
|
|
signal rst_ls1 : std_ulogic := '1';
|
|
|
|
signal rst_dbg : std_ulogic := '1';
|
|
|
|
signal alt_reset_d : std_ulogic;
|
|
|
|
|
|
|
|
signal sim_cr_dump: std_ulogic;
|
|
|
|
|
|
|
|
-- Debug actions
|
|
|
|
signal dbg_core_stop: std_ulogic;
|
|
|
|
signal dbg_core_rst: std_ulogic;
|
|
|
|
signal dbg_icache_rst: std_ulogic;
|
|
|
|
|
|
|
|
signal dbg_gpr_req : std_ulogic;
|
|
|
|
signal dbg_gpr_ack : std_ulogic;
|
|
|
|
signal dbg_gpr_addr : gspr_index_t;
|
|
|
|
signal dbg_gpr_data : std_ulogic_vector(63 downto 0);
|
|
|
|
|
|
|
|
signal msr : std_ulogic_vector(63 downto 0);
|
|
|
|
|
|
|
|
-- Debug status
|
|
|
|
signal dbg_core_is_stopped: std_ulogic;
|
|
|
|
|
|
|
|
-- Logging signals
|
|
|
|
signal log_data : std_ulogic_vector(255 downto 0);
|
|
|
|
signal log_rd_addr : std_ulogic_vector(31 downto 0);
|
|
|
|
signal log_wr_addr : std_ulogic_vector(31 downto 0);
|
|
|
|
signal log_rd_data : std_ulogic_vector(63 downto 0);
|
|
|
|
|
|
|
|
function keep_h(disable : boolean) return string is
|
|
|
|
begin
|
|
|
|
if disable then
|
|
|
|
return "yes";
|
|
|
|
else
|
|
|
|
return "no";
|
|
|
|
end if;
|
|
|
|
end function;
|
|
|
|
attribute keep_hierarchy : string;
|
|
|
|
attribute keep_hierarchy of fetch1_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of icache_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of decode1_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of decode2_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of register_file_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of cr_file_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of execute1_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of loadstore1_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of mmu_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of dcache_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of writeback_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
attribute keep_hierarchy of debug_0 : label is keep_h(DISABLE_FLATTEN);
|
|
|
|
begin
|
|
|
|
|
|
|
|
core_rst <= dbg_core_rst or rst;
|
|
|
|
|
|
|
|
resets: process(clk)
|
|
|
|
begin
|
|
|
|
if rising_edge(clk) then
|
|
|
|
rst_fetch1 <= core_rst;
|
|
|
|
rst_fetch2 <= core_rst;
|
|
|
|
rst_icache <= core_rst;
|
|
|
|
rst_dcache <= core_rst;
|
|
|
|
rst_dec1 <= core_rst;
|
|
|
|
rst_dec2 <= core_rst;
|
|
|
|
rst_ex1 <= core_rst;
|
|
|
|
rst_ls1 <= core_rst;
|
|
|
|
rst_dbg <= rst;
|
|
|
|
alt_reset_d <= alt_reset;
|
|
|
|
end if;
|
|
|
|
end process;
|
|
|
|
|
|
|
|
fetch1_0: entity work.fetch1
|
|
|
|
generic map (
|
|
|
|
RESET_ADDRESS => (others => '0'),
|
|
|
|
ALT_RESET_ADDRESS => ALT_RESET_ADDRESS
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
rst => rst_fetch1,
|
|
|
|
alt_reset_in => alt_reset_d,
|
|
|
|
stall_in => fetch1_stall_in,
|
|
|
|
flush_in => fetch1_flush,
|
|
|
|
stop_in => dbg_core_stop,
|
|
|
|
d_in => decode1_to_fetch1,
|
|
|
|
e_in => execute1_to_fetch1,
|
|
|
|
i_out => fetch1_to_icache,
|
|
|
|
log_out => log_data(42 downto 0)
|
|
|
|
);
|
|
|
|
|
|
|
|
fetch1_stall_in <= icache_stall_out or decode1_busy;
|
|
|
|
fetch1_flush <= flush or decode1_flush;
|
|
|
|
|
|
|
|
icache_0: entity work.icache
|
|
|
|
generic map(
|
|
|
|
SIM => SIM,
|
|
|
|
LINE_SIZE => 64,
|
|
|
|
NUM_LINES => 64,
|
|
|
|
NUM_WAYS => 2,
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map(
|
|
|
|
clk => clk,
|
|
|
|
rst => rst_icache,
|
|
|
|
i_in => fetch1_to_icache,
|
|
|
|
i_out => icache_to_decode1,
|
Add TLB to icache
This adds a direct-mapped TLB to the icache, with 64 entries by default.
Execute1 now sends a "virt_mode" signal from MSR[IR] to fetch1 along
with redirects to indicate whether instruction addresses should be
translated through the TLB, and fetch1 sends that on to icache.
Similarly a "priv_mode" signal is sent to indicate the privilege
mode for instruction fetches. This means that changes to MSR[IR]
or MSR[PR] don't take effect until the next redirect, meaning an
isync, rfid, branch, etc.
The icache uses a hash of the effective address (i.e. next instruction
address) to index the TLB. The hash is an XOR of three fields of the
address; with a 64-entry TLB, the fields are bits 12--17, 18--23 and
24--29 of the address. TLB invalidations simply invalidate the
indexed TLB entry without checking the contents.
If the icache detects a TLB miss with virt_mode=1, it will send a
fetch_failed indication through fetch2 to decode1, which will turn it
into a special OP_FETCH_FAILED opcode with unit=LDST. That will get
sent down to loadstore1 which will currently just raise a Instruction
Storage Interrupt (0x400) exception.
One bit in the PTE obtained from the TLB is used to check whether an
instruction access is allowed -- the privilege bit (bit 3). If bit 3
is 1 and priv_mode=0, then a fetch_failed indication is sent down to
fetch2 and to decode1, which generates an OP_FETCH_FAILED. Any PTEs
with PTE bit 0 (EAA[3]) clear or bit 8 (R) clear should not be put
into the iTLB since such PTEs would not allow execution by any
context.
Tlbie operations get sent from mmu to icache over a new connection.
Unfortunately the privileged instruction tests are broken for now.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
|
|
|
m_in => mmu_to_icache,
|
|
|
|
flush_in => fetch1_flush,
|
|
|
|
inval_in => dbg_icache_rst or ex1_icache_inval,
|
|
|
|
stall_in => icache_stall_in,
|
|
|
|
stall_out => icache_stall_out,
|
|
|
|
wishbone_out => wishbone_insn_out,
|
|
|
|
wishbone_in => wishbone_insn_in,
|
|
|
|
log_out => log_data(96 downto 43)
|
|
|
|
);
|
|
|
|
|
|
|
|
icache_stall_in <= decode1_busy;
|
|
|
|
|
|
|
|
decode1_0: entity work.decode1
|
|
|
|
generic map(
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
rst => rst_dec1,
|
|
|
|
stall_in => decode1_stall_in,
|
|
|
|
flush_in => flush,
|
|
|
|
flush_out => decode1_flush,
|
|
|
|
busy_out => decode1_busy,
|
|
|
|
f_in => icache_to_decode1,
|
|
|
|
d_out => decode1_to_decode2,
|
|
|
|
f_out => decode1_to_fetch1,
|
|
|
|
log_out => log_data(109 downto 97)
|
|
|
|
);
|
|
|
|
|
|
|
|
decode1_stall_in <= decode2_stall_out;
|
|
|
|
|
|
|
|
decode2_0: entity work.decode2
|
|
|
|
generic map (
|
|
|
|
EX1_BYPASS => EX1_BYPASS,
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
rst => rst_dec2,
|
|
|
|
busy_in => decode2_busy_in,
|
|
|
|
stall_out => decode2_stall_out,
|
|
|
|
flush_in => flush,
|
|
|
|
complete_in => complete,
|
|
|
|
stopped_out => dbg_core_is_stopped,
|
|
|
|
d_in => decode1_to_decode2,
|
|
|
|
e_out => decode2_to_execute1,
|
|
|
|
r_in => register_file_to_decode2,
|
|
|
|
r_out => decode2_to_register_file,
|
|
|
|
c_in => cr_file_to_decode2,
|
|
|
|
c_out => decode2_to_cr_file,
|
|
|
|
log_out => log_data(119 downto 110)
|
|
|
|
);
|
|
|
|
decode2_busy_in <= ex1_busy_out;
|
|
|
|
|
|
|
|
register_file_0: entity work.register_file
|
|
|
|
generic map (
|
|
|
|
SIM => SIM,
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
d_in => decode2_to_register_file,
|
|
|
|
d_out => register_file_to_decode2,
|
|
|
|
w_in => writeback_to_register_file,
|
|
|
|
dbg_gpr_req => dbg_gpr_req,
|
|
|
|
dbg_gpr_ack => dbg_gpr_ack,
|
|
|
|
dbg_gpr_addr => dbg_gpr_addr,
|
|
|
|
dbg_gpr_data => dbg_gpr_data,
|
|
|
|
sim_dump => terminate,
|
|
|
|
sim_dump_done => sim_cr_dump,
|
|
|
|
log_out => log_data(255 downto 185)
|
|
|
|
);
|
|
|
|
|
|
|
|
cr_file_0: entity work.cr_file
|
|
|
|
generic map (
|
|
|
|
SIM => SIM,
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
d_in => decode2_to_cr_file,
|
|
|
|
d_out => cr_file_to_decode2,
|
|
|
|
w_in => writeback_to_cr_file,
|
|
|
|
sim_dump => sim_cr_dump,
|
|
|
|
log_out => log_data(184 downto 172)
|
|
|
|
);
|
|
|
|
|
|
|
|
execute1_0: entity work.execute1
|
|
|
|
generic map (
|
|
|
|
EX1_BYPASS => EX1_BYPASS,
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
rst => rst_ex1,
|
|
|
|
flush_out => flush,
|
|
|
|
busy_out => ex1_busy_out,
|
|
|
|
e_in => decode2_to_execute1,
|
|
|
|
l_in => loadstore1_to_execute1,
|
|
|
|
ext_irq_in => ext_irq,
|
|
|
|
l_out => execute1_to_loadstore1,
|
|
|
|
f_out => execute1_to_fetch1,
|
|
|
|
e_out => execute1_to_writeback,
|
|
|
|
icache_inval => ex1_icache_inval,
|
|
|
|
dbg_msr_out => msr,
|
|
|
|
terminate_out => terminate,
|
|
|
|
log_out => log_data(134 downto 120),
|
|
|
|
log_rd_addr => log_rd_addr,
|
|
|
|
log_rd_data => log_rd_data,
|
|
|
|
log_wr_addr => log_wr_addr
|
|
|
|
);
|
|
|
|
|
|
|
|
loadstore1_0: entity work.loadstore1
|
|
|
|
generic map (
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
rst => rst_ls1,
|
|
|
|
l_in => execute1_to_loadstore1,
|
|
|
|
e_out => loadstore1_to_execute1,
|
|
|
|
l_out => loadstore1_to_writeback,
|
|
|
|
d_out => loadstore1_to_dcache,
|
|
|
|
d_in => dcache_to_loadstore1,
|
|
|
|
m_out => loadstore1_to_mmu,
|
|
|
|
m_in => mmu_to_loadstore1,
|
|
|
|
dc_stall => dcache_stall_out,
|
|
|
|
log_out => log_data(149 downto 140)
|
|
|
|
);
|
|
|
|
|
|
|
|
mmu_0: entity work.mmu
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
rst => core_rst,
|
|
|
|
l_in => loadstore1_to_mmu,
|
|
|
|
l_out => mmu_to_loadstore1,
|
|
|
|
d_out => mmu_to_dcache,
|
Add TLB to icache
This adds a direct-mapped TLB to the icache, with 64 entries by default.
Execute1 now sends a "virt_mode" signal from MSR[IR] to fetch1 along
with redirects to indicate whether instruction addresses should be
translated through the TLB, and fetch1 sends that on to icache.
Similarly a "priv_mode" signal is sent to indicate the privilege
mode for instruction fetches. This means that changes to MSR[IR]
or MSR[PR] don't take effect until the next redirect, meaning an
isync, rfid, branch, etc.
The icache uses a hash of the effective address (i.e. next instruction
address) to index the TLB. The hash is an XOR of three fields of the
address; with a 64-entry TLB, the fields are bits 12--17, 18--23 and
24--29 of the address. TLB invalidations simply invalidate the
indexed TLB entry without checking the contents.
If the icache detects a TLB miss with virt_mode=1, it will send a
fetch_failed indication through fetch2 to decode1, which will turn it
into a special OP_FETCH_FAILED opcode with unit=LDST. That will get
sent down to loadstore1 which will currently just raise a Instruction
Storage Interrupt (0x400) exception.
One bit in the PTE obtained from the TLB is used to check whether an
instruction access is allowed -- the privilege bit (bit 3). If bit 3
is 1 and priv_mode=0, then a fetch_failed indication is sent down to
fetch2 and to decode1, which generates an OP_FETCH_FAILED. Any PTEs
with PTE bit 0 (EAA[3]) clear or bit 8 (R) clear should not be put
into the iTLB since such PTEs would not allow execution by any
context.
Tlbie operations get sent from mmu to icache over a new connection.
Unfortunately the privileged instruction tests are broken for now.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
|
|
|
d_in => dcache_to_mmu,
|
|
|
|
i_out => mmu_to_icache
|
|
|
|
);
|
|
|
|
|
|
|
|
dcache_0: entity work.dcache
|
|
|
|
generic map(
|
|
|
|
LINE_SIZE => 64,
|
|
|
|
NUM_LINES => 64,
|
|
|
|
NUM_WAYS => 2,
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
rst => rst_dcache,
|
|
|
|
d_in => loadstore1_to_dcache,
|
|
|
|
d_out => dcache_to_loadstore1,
|
|
|
|
m_in => mmu_to_dcache,
|
|
|
|
m_out => dcache_to_mmu,
|
|
|
|
stall_out => dcache_stall_out,
|
|
|
|
wishbone_in => wishbone_data_in,
|
|
|
|
wishbone_out => wishbone_data_out,
|
|
|
|
log_out => log_data(171 downto 152)
|
|
|
|
);
|
|
|
|
|
|
|
|
writeback_0: entity work.writeback
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
e_in => execute1_to_writeback,
|
|
|
|
l_in => loadstore1_to_writeback,
|
|
|
|
w_out => writeback_to_register_file,
|
|
|
|
c_out => writeback_to_cr_file,
|
|
|
|
complete_out => complete
|
|
|
|
);
|
|
|
|
|
|
|
|
log_data(151 downto 150) <= "00";
|
|
|
|
log_data(139 downto 135) <= "00000";
|
|
|
|
|
|
|
|
debug_0: entity work.core_debug
|
|
|
|
generic map (
|
|
|
|
LOG_LENGTH => LOG_LENGTH
|
|
|
|
)
|
|
|
|
port map (
|
|
|
|
clk => clk,
|
|
|
|
rst => rst_dbg,
|
|
|
|
dmi_addr => dmi_addr,
|
|
|
|
dmi_din => dmi_din,
|
|
|
|
dmi_dout => dmi_dout,
|
|
|
|
dmi_req => dmi_req,
|
|
|
|
dmi_wr => dmi_wr,
|
|
|
|
dmi_ack => dmi_ack,
|
|
|
|
core_stop => dbg_core_stop,
|
|
|
|
core_rst => dbg_core_rst,
|
|
|
|
icache_rst => dbg_icache_rst,
|
|
|
|
terminate => terminate,
|
|
|
|
core_stopped => dbg_core_is_stopped,
|
|
|
|
nia => fetch1_to_icache.nia,
|
|
|
|
msr => msr,
|
|
|
|
dbg_gpr_req => dbg_gpr_req,
|
|
|
|
dbg_gpr_ack => dbg_gpr_ack,
|
|
|
|
dbg_gpr_addr => dbg_gpr_addr,
|
|
|
|
dbg_gpr_data => dbg_gpr_data,
|
|
|
|
log_data => log_data,
|
|
|
|
log_read_addr => log_rd_addr,
|
|
|
|
log_read_data => log_rd_data,
|
|
|
|
log_write_addr => log_wr_addr,
|
|
|
|
terminated_out => terminated_out
|
|
|
|
);
|
|
|
|
|
|
|
|
end behave;
|