forked from cores/microwatt
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1040 lines
41 KiB
VHDL
1040 lines
41 KiB
VHDL
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
use std.textio.all;
|
|
|
|
library work;
|
|
use work.wishbone_types.all;
|
|
use work.utils.all;
|
|
use work.helpers.all;
|
|
|
|
entity litedram_wrapper is
|
|
generic (
|
|
DRAM_ABITS : positive;
|
|
DRAM_ALINES : positive;
|
|
|
|
-- Pseudo-ROM payload
|
|
PAYLOAD_SIZE : natural;
|
|
PAYLOAD_FILE : string;
|
|
|
|
-- L2 cache --
|
|
|
|
-- Line size in bytes
|
|
LINE_SIZE : positive := 128;
|
|
-- Number of lines in a set
|
|
NUM_LINES : positive := 32;
|
|
-- Number of ways
|
|
NUM_WAYS : positive := 4;
|
|
-- Max number of stores in the queue
|
|
STOREQ_DEPTH : positive := 8;
|
|
-- Don't send loads until all pending stores acked in litedram
|
|
NO_LS_OVERLAP : boolean := false;
|
|
|
|
-- Debug
|
|
LITEDRAM_TRACE : boolean := false;
|
|
TRACE : boolean := false
|
|
);
|
|
port(
|
|
-- LiteDRAM generates the system clock and reset
|
|
-- from the input clkin
|
|
clk_in : in std_ulogic;
|
|
rst : in std_ulogic;
|
|
system_clk : out std_ulogic;
|
|
system_reset : out std_ulogic;
|
|
core_alt_reset : out std_ulogic;
|
|
pll_locked : out std_ulogic;
|
|
|
|
-- Wishbone ports:
|
|
wb_in : in wishbone_master_out;
|
|
wb_out : out wishbone_slave_out;
|
|
wb_ctrl_in : in wb_io_master_out;
|
|
wb_ctrl_out : out wb_io_slave_out;
|
|
wb_ctrl_is_csr : in std_ulogic;
|
|
wb_ctrl_is_init : in std_ulogic;
|
|
|
|
-- Init core serial debug
|
|
serial_tx : out std_ulogic;
|
|
serial_rx : in std_ulogic;
|
|
|
|
-- Misc
|
|
init_done : out std_ulogic;
|
|
init_error : out std_ulogic;
|
|
|
|
-- DRAM wires
|
|
ddram_a : out std_ulogic_vector(DRAM_ALINES-1 downto 0);
|
|
ddram_ba : out std_ulogic_vector(2 downto 0);
|
|
ddram_ras_n : out std_ulogic;
|
|
ddram_cas_n : out std_ulogic;
|
|
ddram_we_n : out std_ulogic;
|
|
ddram_cs_n : out std_ulogic;
|
|
ddram_dm : out std_ulogic_vector(1 downto 0);
|
|
ddram_dq : inout std_ulogic_vector(15 downto 0);
|
|
ddram_dqs_p : inout std_ulogic_vector(1 downto 0);
|
|
ddram_dqs_n : inout std_ulogic_vector(1 downto 0);
|
|
ddram_clk_p : out std_ulogic;
|
|
ddram_clk_n : out std_ulogic;
|
|
ddram_cke : out std_ulogic;
|
|
ddram_odt : out std_ulogic;
|
|
ddram_reset_n : out std_ulogic
|
|
);
|
|
end entity litedram_wrapper;
|
|
|
|
architecture behaviour of litedram_wrapper is
|
|
|
|
component litedram_core port (
|
|
clk : in std_ulogic;
|
|
rst : in std_ulogic;
|
|
pll_locked : out std_ulogic;
|
|
ddram_a : out std_ulogic_vector(DRAM_ALINES-1 downto 0);
|
|
ddram_ba : out std_ulogic_vector(2 downto 0);
|
|
ddram_ras_n : out std_ulogic;
|
|
ddram_cas_n : out std_ulogic;
|
|
ddram_we_n : out std_ulogic;
|
|
ddram_cs_n : out std_ulogic;
|
|
ddram_dm : out std_ulogic_vector(1 downto 0);
|
|
ddram_dq : inout std_ulogic_vector(15 downto 0);
|
|
ddram_dqs_p : inout std_ulogic_vector(1 downto 0);
|
|
ddram_dqs_n : inout std_ulogic_vector(1 downto 0);
|
|
ddram_clk_p : out std_ulogic;
|
|
ddram_clk_n : out std_ulogic;
|
|
ddram_cke : out std_ulogic;
|
|
ddram_odt : out std_ulogic;
|
|
ddram_reset_n : out std_ulogic;
|
|
init_done : out std_ulogic;
|
|
init_error : out std_ulogic;
|
|
user_clk : out std_ulogic;
|
|
user_rst : out std_ulogic;
|
|
wb_ctrl_adr : in std_ulogic_vector(29 downto 0);
|
|
wb_ctrl_dat_w : in std_ulogic_vector(31 downto 0);
|
|
wb_ctrl_dat_r : out std_ulogic_vector(31 downto 0);
|
|
wb_ctrl_sel : in std_ulogic_vector(3 downto 0);
|
|
wb_ctrl_cyc : in std_ulogic;
|
|
wb_ctrl_stb : in std_ulogic;
|
|
wb_ctrl_ack : out std_ulogic;
|
|
wb_ctrl_we : in std_ulogic;
|
|
wb_ctrl_cti : in std_ulogic_vector(2 downto 0);
|
|
wb_ctrl_bte : in std_ulogic_vector(1 downto 0);
|
|
wb_ctrl_err : out std_ulogic;
|
|
user_port_native_0_cmd_valid : in std_ulogic;
|
|
user_port_native_0_cmd_ready : out std_ulogic;
|
|
user_port_native_0_cmd_we : in std_ulogic;
|
|
user_port_native_0_cmd_addr : in std_ulogic_vector(DRAM_ABITS-1 downto 0);
|
|
user_port_native_0_wdata_valid : in std_ulogic;
|
|
user_port_native_0_wdata_ready : out std_ulogic;
|
|
user_port_native_0_wdata_we : in std_ulogic_vector(15 downto 0);
|
|
user_port_native_0_wdata_data : in std_ulogic_vector(127 downto 0);
|
|
user_port_native_0_rdata_valid : out std_ulogic;
|
|
user_port_native_0_rdata_ready : in std_ulogic;
|
|
user_port_native_0_rdata_data : out std_ulogic_vector(127 downto 0)
|
|
);
|
|
end component;
|
|
|
|
signal user_port0_cmd_valid : std_ulogic;
|
|
signal user_port0_cmd_ready : std_ulogic;
|
|
signal user_port0_cmd_we : std_ulogic;
|
|
signal user_port0_cmd_addr : std_ulogic_vector(DRAM_ABITS-1 downto 0);
|
|
signal user_port0_wdata_valid : std_ulogic;
|
|
signal user_port0_wdata_ready : std_ulogic;
|
|
signal user_port0_wdata_we : std_ulogic_vector(15 downto 0);
|
|
signal user_port0_wdata_data : std_ulogic_vector(127 downto 0);
|
|
signal user_port0_rdata_valid : std_ulogic;
|
|
signal user_port0_rdata_ready : std_ulogic;
|
|
signal user_port0_rdata_data : std_ulogic_vector(127 downto 0);
|
|
|
|
signal wb_ctrl_adr : std_ulogic_vector(29 downto 0);
|
|
signal wb_ctrl_dat_w : std_ulogic_vector(31 downto 0);
|
|
signal wb_ctrl_dat_r : std_ulogic_vector(31 downto 0);
|
|
signal wb_ctrl_sel : std_ulogic_vector(3 downto 0);
|
|
signal wb_ctrl_cyc : std_ulogic := '0';
|
|
signal wb_ctrl_stb : std_ulogic;
|
|
signal wb_ctrl_ack : std_ulogic;
|
|
signal wb_ctrl_we : std_ulogic;
|
|
|
|
signal wb_init_in : wb_io_master_out;
|
|
signal wb_init_out : wb_io_slave_out;
|
|
|
|
-- DRAM data port width
|
|
constant DRAM_DBITS : natural := 128;
|
|
constant DRAM_SBITS : natural := (DRAM_DBITS / 8);
|
|
|
|
-- BRAM organisation: We never access more than wishbone_data_bits at
|
|
-- a time so to save resources we make the array only that wide, and
|
|
-- use consecutive indices for to make a cache "line"
|
|
--
|
|
-- ROW_SIZE is the width in bytes of the BRAM (based on litedram, so 128-bits)
|
|
constant ROW_SIZE : natural := DRAM_DBITS / 8;
|
|
-- ROW_PER_LINE is the number of row (litedram transactions) in a line
|
|
constant ROW_PER_LINE : natural := LINE_SIZE / ROW_SIZE;
|
|
-- BRAM_ROWS is the number of rows in BRAM needed to represent the full
|
|
-- dcache
|
|
constant BRAM_ROWS : natural := NUM_LINES * ROW_PER_LINE;
|
|
|
|
-- Bit fields counts in the address
|
|
|
|
-- ROW_BITS is the number of bits to select a row
|
|
constant ROW_BITS : natural := log2(BRAM_ROWS);
|
|
-- ROW_LINEBITS is the number of bits to select a row within a line
|
|
constant ROW_LINEBITS : natural := log2(ROW_PER_LINE);
|
|
-- LINE_OFF_BITS is the number of bits for the offset in a cache line
|
|
constant LINE_OFF_BITS : natural := log2(LINE_SIZE);
|
|
-- ROW_OFF_BITS is the number of bits for the offset in a row
|
|
constant ROW_OFF_BITS : natural := log2(ROW_SIZE);
|
|
-- REAL_ADDR_BITS is the number of real address bits that we store
|
|
constant REAL_ADDR_BITS : positive := DRAM_ABITS + ROW_OFF_BITS;
|
|
-- INDEX_BITS is the number if bits to select a cache line
|
|
constant INDEX_BITS : natural := log2(NUM_LINES);
|
|
-- SET_SIZE_BITS is the log base 2 of the set size
|
|
constant SET_SIZE_BITS : natural := LINE_OFF_BITS + INDEX_BITS;
|
|
-- TAG_BITS is the number of bits of the tag part of the address
|
|
constant TAG_BITS : natural := REAL_ADDR_BITS - SET_SIZE_BITS;
|
|
-- WAY_BITS is the number of bits to select a way
|
|
constant WAY_BITS : natural := log2(NUM_WAYS);
|
|
|
|
subtype row_t is integer range 0 to BRAM_ROWS-1;
|
|
subtype index_t is integer range 0 to NUM_LINES-1;
|
|
subtype way_t is integer range 0 to NUM_WAYS-1;
|
|
|
|
-- The cache data BRAM organized as described above for each way
|
|
subtype cache_row_t is std_ulogic_vector(DRAM_DBITS-1 downto 0);
|
|
|
|
-- The cache tags LUTRAM has a row per set. Vivado is a pain and will
|
|
-- not handle a clean (commented) definition of the cache tags as a 3d
|
|
-- memory. For now, work around it by putting all the tags
|
|
subtype cache_tag_t is std_logic_vector(TAG_BITS-1 downto 0);
|
|
-- type cache_tags_set_t is array(way_t) of cache_tag_t;
|
|
-- type cache_tags_array_t is array(index_t) of cache_tags_set_t;
|
|
constant TAG_RAM_WIDTH : natural := TAG_BITS * NUM_WAYS;
|
|
subtype cache_tags_set_t is std_logic_vector(TAG_RAM_WIDTH-1 downto 0);
|
|
type cache_tags_array_t is array(index_t) of cache_tags_set_t;
|
|
|
|
-- The cache valid bits
|
|
subtype cache_way_valids_t is std_ulogic_vector(NUM_WAYS-1 downto 0);
|
|
type cache_valids_t is array(index_t) of cache_way_valids_t;
|
|
|
|
-- Storage. Hopefully "cache_rows" is a BRAM, the rest is LUTs
|
|
signal cache_tags : cache_tags_array_t;
|
|
signal cache_valids : cache_valids_t;
|
|
|
|
attribute ram_style : string;
|
|
attribute ram_style of cache_tags : signal is "distributed";
|
|
|
|
--
|
|
-- Store queue signals
|
|
--
|
|
-- We store a single wishbone dword per entry (64-bit) but all
|
|
-- 16 sel bits for the DRAM.
|
|
-- XXX Investigate storing only AD3 and 8 sel bits if it's better
|
|
constant STOREQ_BITS : positive := wishbone_data_bits + DRAM_SBITS;
|
|
|
|
signal storeq_rd_ready : std_ulogic;
|
|
signal storeq_rd_valid : std_ulogic;
|
|
signal storeq_rd_data : std_ulogic_vector(STOREQ_BITS-1 downto 0);
|
|
signal storeq_wr_ready : std_ulogic;
|
|
signal storeq_wr_valid : std_ulogic;
|
|
signal storeq_wr_data : std_ulogic_vector(STOREQ_BITS-1 downto 0);
|
|
|
|
--
|
|
-- Cache management signals
|
|
--
|
|
|
|
-- Cache state machine
|
|
type state_t is (IDLE, -- Normal load hit processing
|
|
REFILL_WAIT_ACK); -- Cache refill wait ack
|
|
signal state : state_t;
|
|
|
|
-- Latched WB request.
|
|
signal wb_req : wishbone_master_out := wishbone_master_out_init;
|
|
|
|
-- Read pipeline (to handle cache RAM latency)
|
|
signal read_ack_0 : std_ulogic;
|
|
signal read_ack_1 : std_ulogic;
|
|
signal read_ad3_0 : std_ulogic;
|
|
signal read_ad3_1 : std_ulogic;
|
|
signal read_way_0 : way_t;
|
|
signal read_way_1 : way_t;
|
|
|
|
-- Async signals decoding latched request
|
|
type req_op_t is (OP_NONE,
|
|
OP_LOAD_HIT,
|
|
OP_LOAD_MISS,
|
|
OP_STORE_HIT,
|
|
OP_STORE_MISS);
|
|
|
|
signal req_index : index_t;
|
|
signal req_row : row_t;
|
|
signal req_hit_way : way_t;
|
|
signal req_tag : cache_tag_t;
|
|
signal req_op : req_op_t;
|
|
signal req_laddr : std_ulogic_vector(REAL_ADDR_BITS-1 downto 0);
|
|
signal req_ad3 : std_ulogic;
|
|
signal req_we : std_ulogic_vector(DRAM_SBITS-1 downto 0);
|
|
signal req_wdata : std_ulogic_vector(DRAM_DBITS-1 downto 0);
|
|
signal accept_store : std_ulogic;
|
|
|
|
-- Line refill command signals and latches
|
|
signal refill_cmd_valid : std_ulogic;
|
|
signal refill_cmd_addr : std_ulogic_vector(DRAM_ABITS-1 downto 0);
|
|
signal refill_way : way_t;
|
|
signal refill_index : index_t;
|
|
signal refill_row : row_t;
|
|
|
|
-- Cache RAM interface
|
|
type cache_ram_out_t is array(way_t) of cache_row_t;
|
|
signal cache_out : cache_ram_out_t;
|
|
|
|
-- PLRU output interface
|
|
type plru_out_t is array(index_t) of std_ulogic_vector(WAY_BITS-1 downto 0);
|
|
signal plru_victim : plru_out_t;
|
|
|
|
--
|
|
-- Helper functions to decode incoming requests
|
|
--
|
|
|
|
-- Return the cache line index (tag index) for an address
|
|
function get_index(addr: wishbone_addr_type) return index_t is
|
|
begin
|
|
return to_integer(unsigned(addr(SET_SIZE_BITS - 1 downto LINE_OFF_BITS)));
|
|
end;
|
|
|
|
-- Return the cache row index (data memory) for an address
|
|
function get_row(addr: std_ulogic_vector(REAL_ADDR_BITS-1 downto 0)) return row_t is
|
|
begin
|
|
return to_integer(unsigned(addr(SET_SIZE_BITS - 1 downto ROW_OFF_BITS)));
|
|
end;
|
|
|
|
-- Returns whether this is the last row of a line. It takes a DRAM address
|
|
function is_last_row_addr(addr: std_ulogic_vector(REAL_ADDR_BITS-1 downto ROW_OFF_BITS))
|
|
return boolean is
|
|
constant ones : std_ulogic_vector(ROW_LINEBITS-1 downto 0) := (others => '1');
|
|
begin
|
|
return addr(LINE_OFF_BITS-1 downto ROW_OFF_BITS) = ones;
|
|
end;
|
|
|
|
-- Returns whether this is the last row of a line
|
|
function is_last_row(row: row_t) return boolean is
|
|
variable row_v : std_ulogic_vector(ROW_BITS-1 downto 0);
|
|
constant ones : std_ulogic_vector(ROW_LINEBITS-1 downto 0) := (others => '1');
|
|
begin
|
|
row_v := std_ulogic_vector(to_unsigned(row, ROW_BITS));
|
|
return row_v(ROW_LINEBITS-1 downto 0) = ones;
|
|
end;
|
|
|
|
-- Return the address of the next row in the current cache line. It takes a
|
|
-- DRAM address
|
|
function next_row_addr(addr: std_ulogic_vector(REAL_ADDR_BITS-1 downto ROW_OFF_BITS))
|
|
return std_ulogic_vector is
|
|
variable row_idx : std_ulogic_vector(ROW_LINEBITS-1 downto 0);
|
|
variable result : std_ulogic_vector(REAL_ADDR_BITS-1 downto ROW_OFF_BITS);
|
|
begin
|
|
-- Is there no simpler way in VHDL to generate that 3 bits adder ?
|
|
row_idx := addr(LINE_OFF_BITS-1 downto ROW_OFF_BITS);
|
|
row_idx := std_ulogic_vector(unsigned(row_idx) + 1);
|
|
result := addr;
|
|
result(LINE_OFF_BITS-1 downto ROW_OFF_BITS) := row_idx;
|
|
return result;
|
|
end;
|
|
|
|
-- Return the next row in the current cache line. We use a dedicated
|
|
-- function in order to limit the size of the generated adder to be
|
|
-- only the bits within a cache line (3 bits with default settings)
|
|
--
|
|
function next_row(row: row_t) return row_t is
|
|
variable row_v : std_ulogic_vector(ROW_BITS-1 downto 0);
|
|
variable row_idx : std_ulogic_vector(ROW_LINEBITS-1 downto 0);
|
|
variable result : std_ulogic_vector(ROW_BITS-1 downto 0);
|
|
begin
|
|
row_v := std_ulogic_vector(to_unsigned(row, ROW_BITS));
|
|
row_idx := row_v(ROW_LINEBITS-1 downto 0);
|
|
row_v(ROW_LINEBITS-1 downto 0) := std_ulogic_vector(unsigned(row_idx) + 1);
|
|
return to_integer(unsigned(row_v));
|
|
end;
|
|
|
|
-- Get the tag value from the address
|
|
function get_tag(addr: wishbone_addr_type) return cache_tag_t is
|
|
begin
|
|
return addr(REAL_ADDR_BITS - 1 downto SET_SIZE_BITS);
|
|
end;
|
|
|
|
-- Read a tag from a tag memory row
|
|
function read_tag(way: way_t; tagset: cache_tags_set_t) return cache_tag_t is
|
|
begin
|
|
return tagset((way+1) * TAG_BITS - 1 downto way * TAG_BITS);
|
|
end;
|
|
|
|
-- Write a tag to tag memory row
|
|
procedure write_tag(way: in way_t; tagset: inout cache_tags_set_t;
|
|
tag: cache_tag_t) is
|
|
begin
|
|
tagset((way+1) * TAG_BITS - 1 downto way * TAG_BITS) := tag;
|
|
end;
|
|
|
|
begin
|
|
|
|
-- Sanity checks
|
|
assert LINE_SIZE mod ROW_SIZE = 0 report "LINE_SIZE not multiple of ROW_SIZE" severity FAILURE;
|
|
assert ispow2(LINE_SIZE) report "LINE_SIZE not power of 2" severity FAILURE;
|
|
assert ispow2(NUM_LINES) report "NUM_LINES not power of 2" severity FAILURE;
|
|
assert ispow2(ROW_PER_LINE) report "ROW_PER_LINE not power of 2" severity FAILURE;
|
|
assert (ROW_BITS = INDEX_BITS + ROW_LINEBITS)
|
|
report "geometry bits don't add up" severity FAILURE;
|
|
assert (LINE_OFF_BITS = ROW_OFF_BITS + ROW_LINEBITS)
|
|
report "geometry bits don't add up" severity FAILURE;
|
|
assert (REAL_ADDR_BITS = TAG_BITS + INDEX_BITS + LINE_OFF_BITS)
|
|
report "geometry bits don't add up" severity FAILURE;
|
|
assert (REAL_ADDR_BITS = TAG_BITS + ROW_BITS + ROW_OFF_BITS)
|
|
report "geometry bits don't add up" severity FAILURE;
|
|
assert (128 = DRAM_DBITS)
|
|
report "Can't yet handle a DRAM width that isn't 128-bits" severity FAILURE;
|
|
|
|
-- alternate core reset address set when DRAM is not initialized.
|
|
core_alt_reset <= not init_done;
|
|
|
|
-- Init code BRAM memory slave
|
|
init_ram_0: entity work.dram_init_mem
|
|
generic map(
|
|
EXTRA_PAYLOAD_FILE => PAYLOAD_FILE,
|
|
EXTRA_PAYLOAD_SIZE => PAYLOAD_SIZE
|
|
)
|
|
port map(
|
|
clk => system_clk,
|
|
wb_in => wb_init_in,
|
|
wb_out => wb_init_out
|
|
);
|
|
|
|
--
|
|
-- Control bus wishbone: This muxes the wishbone to the CSRs
|
|
-- and an internal small one to the init BRAM
|
|
--
|
|
|
|
-- Init DRAM wishbone IN signals
|
|
wb_init_in.adr <= wb_ctrl_in.adr;
|
|
wb_init_in.dat <= wb_ctrl_in.dat;
|
|
wb_init_in.sel <= wb_ctrl_in.sel;
|
|
wb_init_in.we <= wb_ctrl_in.we;
|
|
wb_init_in.stb <= wb_ctrl_in.stb;
|
|
wb_init_in.cyc <= wb_ctrl_in.cyc and wb_ctrl_is_init;
|
|
|
|
-- DRAM CSR IN signals. Extra latch to help with timing
|
|
csr_latch: process(system_clk)
|
|
begin
|
|
if rising_edge(system_clk) then
|
|
if system_reset = '1' then
|
|
wb_ctrl_cyc <= '0';
|
|
wb_ctrl_stb <= '0';
|
|
else
|
|
-- XXX Maybe only update addr when cyc = '1' to save power ?
|
|
wb_ctrl_adr <= x"0000" & wb_ctrl_in.adr(15 downto 2);
|
|
wb_ctrl_dat_w <= wb_ctrl_in.dat;
|
|
wb_ctrl_sel <= wb_ctrl_in.sel;
|
|
wb_ctrl_we <= wb_ctrl_in.we;
|
|
wb_ctrl_cyc <= wb_ctrl_in.cyc and wb_ctrl_is_csr;
|
|
wb_ctrl_stb <= wb_ctrl_in.stb and wb_ctrl_is_csr;
|
|
|
|
-- Clear stb on ack otherwise the memory will latch
|
|
-- the write twice which breaks levelling. On the next
|
|
-- cycle we will latch an updated stb that takes the
|
|
-- ack into account.
|
|
if wb_ctrl_ack = '1' then
|
|
wb_ctrl_stb <= '0';
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- Ctrl bus wishbone OUT signals. XXX Consider adding latch on
|
|
-- CSR response to help timing
|
|
wb_ctrl_out.ack <= wb_ctrl_ack when wb_ctrl_is_csr = '1'
|
|
else wb_init_out.ack;
|
|
wb_ctrl_out.dat <= wb_ctrl_dat_r when wb_ctrl_is_csr = '1'
|
|
else wb_init_out.dat;
|
|
wb_ctrl_out.stall <= wb_init_out.stall when wb_ctrl_is_init else
|
|
'0' when wb_ctrl_in.cyc = '0' else not wb_ctrl_ack;
|
|
|
|
|
|
-- Generate a cache RAM for each way
|
|
rams: for i in 0 to NUM_WAYS-1 generate
|
|
signal do_read : std_ulogic;
|
|
signal do_write : std_ulogic;
|
|
signal rd_addr : std_ulogic_vector(ROW_BITS-1 downto 0);
|
|
signal wr_addr : std_ulogic_vector(ROW_BITS-1 downto 0);
|
|
signal wr_data : std_ulogic_vector(DRAM_DBITS-1 downto 0);
|
|
signal wr_sel : std_ulogic_vector(ROW_SIZE-1 downto 0);
|
|
signal wr_sel_m : std_ulogic_vector(ROW_SIZE-1 downto 0);
|
|
signal dout : cache_row_t;
|
|
begin
|
|
way: entity work.cache_ram
|
|
generic map (
|
|
ROW_BITS => ROW_BITS,
|
|
WIDTH => DRAM_DBITS,
|
|
ADD_BUF => true
|
|
)
|
|
port map (
|
|
clk => system_clk,
|
|
rd_en => do_read,
|
|
rd_addr => rd_addr,
|
|
rd_data => dout,
|
|
wr_sel => wr_sel_m,
|
|
wr_addr => wr_addr,
|
|
wr_data => wr_data
|
|
);
|
|
process(all)
|
|
begin
|
|
--
|
|
-- Read port
|
|
--
|
|
do_read <= '1';
|
|
cache_out(i) <= dout;
|
|
rd_addr <= std_ulogic_vector(to_unsigned(req_row, ROW_BITS));
|
|
|
|
--
|
|
-- Write mux: cache refills from DRAM or writes from Wishbone
|
|
--
|
|
if state = IDLE then
|
|
-- Write from wishbone
|
|
wr_addr <= std_ulogic_vector(to_unsigned(req_row, ROW_BITS));
|
|
wr_data <= req_wdata;
|
|
wr_sel <= req_we;
|
|
else
|
|
-- Refill from DRAM
|
|
wr_data <= user_port0_rdata_data;
|
|
wr_sel <= (others => '1');
|
|
wr_addr <= std_ulogic_vector(to_unsigned(refill_row, ROW_BITS));
|
|
end if;
|
|
|
|
--
|
|
-- Write enable logic
|
|
--
|
|
do_write <= '0';
|
|
if req_op = OP_STORE_HIT and req_hit_way = i then
|
|
do_write <= '1';
|
|
elsif user_port0_rdata_valid = '1' and refill_way = i then
|
|
do_write <= '1';
|
|
end if;
|
|
|
|
-- Mask write selects with do_write since BRAM doesn't always
|
|
-- have a global write-enable (Vivado generates TDP instead
|
|
-- of SDP when using one, thus doubling cache BRAM usage).
|
|
for i in 0 to ROW_SIZE-1 loop
|
|
wr_sel_m(i) <= wr_sel(i) and do_write;
|
|
end loop;
|
|
|
|
if TRACE and rising_edge(system_clk) then
|
|
if do_write = '1' then
|
|
report "cache write way:" & integer'image(i) &
|
|
" addr:" & to_hstring(wr_addr) &
|
|
" sel:" & to_hstring(wr_sel_m) &
|
|
" data:" & to_hstring(wr_data);
|
|
end if;
|
|
end if;
|
|
end process;
|
|
end generate;
|
|
|
|
-- Generate PLRUs
|
|
maybe_plrus: if NUM_WAYS > 1 generate
|
|
begin
|
|
plrus: for i in 0 to NUM_LINES-1 generate
|
|
-- PLRU interface
|
|
signal plru_acc : std_ulogic_vector(WAY_BITS-1 downto 0);
|
|
signal plru_acc_en : std_ulogic;
|
|
signal plru_out : std_ulogic_vector(WAY_BITS-1 downto 0);
|
|
begin
|
|
plru : entity work.plru
|
|
generic map (
|
|
BITS => WAY_BITS
|
|
)
|
|
port map (
|
|
clk => system_clk,
|
|
rst => system_reset,
|
|
acc => plru_acc,
|
|
acc_en => plru_acc_en,
|
|
lru => plru_out
|
|
);
|
|
|
|
process(req_index, req_op, req_hit_way, plru_out)
|
|
begin
|
|
-- PLRU interface
|
|
if (req_op = OP_LOAD_HIT or
|
|
req_op = OP_STORE_HIT) and req_index = i then
|
|
plru_acc_en <= '1';
|
|
else
|
|
plru_acc_en <= '0';
|
|
end if;
|
|
plru_acc <= std_ulogic_vector(to_unsigned(req_hit_way, WAY_BITS));
|
|
plru_victim(i) <= plru_out;
|
|
end process;
|
|
end generate;
|
|
end generate;
|
|
|
|
--
|
|
-- Wishbone interface:
|
|
--
|
|
-- - Incoming wishbone request latch (to help with timing)
|
|
-- - Read response pipeline (to match BRAM output buffer delay)
|
|
-- - Stall generation
|
|
--
|
|
-- XXX TODO: Properly handle cyc drops before all acks are sent...
|
|
--
|
|
request_latch: process(system_clk)
|
|
begin
|
|
if rising_edge(system_clk) then
|
|
-- We can latch a new request if we are idle (for now). We also
|
|
-- latch the absence of request. This is a pipeline that takes
|
|
-- one per-cycle unless non-IDLE.
|
|
--
|
|
if wb_out.stall = '0' then
|
|
-- Avoid constantly updating addr/data for unrelated requests
|
|
if wb_in.cyc = '1' then
|
|
wb_req <= wb_in;
|
|
else
|
|
wb_req.cyc <= wb_in.cyc;
|
|
wb_req.stb <= wb_in.stb;
|
|
end if;
|
|
|
|
if TRACE then
|
|
if wb_in.cyc = '1' and wb_in.stb = '1' then
|
|
report "latch new wb req ! addr:" & to_hstring(wb_in.adr) &
|
|
" we:" & std_ulogic'image(wb_in.we) &
|
|
" sel:" & to_hstring(wb_in.sel);
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
--
|
|
--
|
|
-- Read response pipeline
|
|
--
|
|
-- XXX Might have to put store acks in there too (see comment in wb_response)
|
|
read_pipe: process(system_clk)
|
|
begin
|
|
if rising_edge(system_clk) then
|
|
read_ack_0 <= '1' when req_op = OP_LOAD_HIT else '0';
|
|
read_ad3_0 <= req_ad3;
|
|
read_way_0 <= req_hit_way;
|
|
|
|
read_ack_1 <= read_ack_0;
|
|
read_ad3_1 <= read_ad3_0;
|
|
read_way_1 <= read_way_0;
|
|
|
|
if TRACE then
|
|
if req_op = OP_LOAD_HIT then
|
|
report "Load hit addr:" & to_hstring(wb_req.adr) &
|
|
" idx:" & integer'image(req_index) &
|
|
" tag:" & to_hstring(req_tag) &
|
|
" way:" & integer'image(req_hit_way);
|
|
elsif req_op = OP_LOAD_MISS then
|
|
report "Load miss addr:" & to_hstring(wb_req.adr);
|
|
end if;
|
|
if read_ack_0 = '1' then
|
|
report "read data:" & to_hstring(cache_out(read_way_0));
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
wb_reponse: process(all)
|
|
variable rdata : std_ulogic_vector(DRAM_DBITS-1 downto 0);
|
|
variable store_done : std_ulogic;
|
|
begin
|
|
-- Can we accept a store ? This is set when IDLE and the store
|
|
-- queue & command queue are not full.
|
|
--
|
|
-- Note: This is only used to control the WB request latch, stall
|
|
-- and store "early complete". We don't want to use this to control
|
|
-- cmd_valid to DRAM as this would create a circular dependency inside
|
|
-- LiteDRAM as cmd_ready I think is driven from cmd_valid.
|
|
--
|
|
-- The state machine that controls the command queue must thus
|
|
-- reproduce this logic at least partially.
|
|
--
|
|
-- Note also that user_port0_cmd_ready from LiteDRAM is combinational
|
|
-- from user_port0_cmd_valid. IE. we won't know that LiteDRAM cannot
|
|
-- accept a command until we try to send one.
|
|
--
|
|
if state = IDLE then
|
|
accept_store <= user_port0_cmd_ready and storeq_wr_ready;
|
|
|
|
-- Corner case !!! The read acks pipeline takes two extra cycles
|
|
-- which means a store ack can collide with a previous load hit
|
|
-- ack. Thus we stall stores if we have a load ack pending.
|
|
if read_ack_0 = '1' or read_ack_1 = '1' then
|
|
accept_store <= '0';
|
|
end if;
|
|
else
|
|
accept_store <= '0';
|
|
end if;
|
|
|
|
-- Generate stalls. For loads, we stall if we are going to take a load
|
|
-- miss or are in the middle of a refill. For stores, if we can't
|
|
-- accept it.
|
|
case state is
|
|
when IDLE =>
|
|
case req_op is
|
|
when OP_LOAD_MISS =>
|
|
wb_out.stall <= '1';
|
|
when OP_STORE_MISS | OP_STORE_HIT =>
|
|
wb_out.stall <= not accept_store;
|
|
when others =>
|
|
wb_out.stall <= '0';
|
|
end case;
|
|
when REFILL_WAIT_ACK =>
|
|
wb_out.stall <= '1';
|
|
end case;
|
|
|
|
-- Data out mux
|
|
rdata := cache_out(read_way_1);
|
|
wb_out.dat <= rdata(127 downto 64) when read_ad3_1 = '1' else rdata(63 downto 0);
|
|
|
|
-- Early-complete stores on wishbone.
|
|
if req_op = OP_STORE_HIT or req_op = OP_STORE_MISS then
|
|
store_done := accept_store;
|
|
else
|
|
store_done := '0';
|
|
end if;
|
|
|
|
-- Generate ACKs on read hits and store complete
|
|
--
|
|
-- XXXX TODO: This can happen on store right behind loads !
|
|
-- This probably need to be fixed by putting store acks in
|
|
-- the same pipeline as the read acks. TOOD: Create a testbench
|
|
-- to exercise those corner cases as the core can't yet.
|
|
--
|
|
wb_out.ack <= read_ack_1 or store_done;
|
|
assert read_ack_0 = '0' or store_done = '0' report
|
|
"Read ack and store ack collision !"
|
|
severity failure;
|
|
end process;
|
|
|
|
--
|
|
-- Cache request decode
|
|
--
|
|
request_decode: process(all)
|
|
variable valid : std_ulogic;
|
|
variable is_hit : std_ulogic;
|
|
variable hit_way : way_t;
|
|
begin
|
|
-- Extract line, row and tag from request
|
|
req_index <= get_index(wb_req.adr);
|
|
req_row <= get_row(wb_req.adr(REAL_ADDR_BITS-1 downto 0));
|
|
req_tag <= get_tag(wb_req.adr);
|
|
|
|
-- Calculate address of beginning of cache line, will be
|
|
-- used for cache miss processing if needed
|
|
req_laddr <= wb_req.adr(REAL_ADDR_BITS - 1 downto LINE_OFF_BITS) &
|
|
(LINE_OFF_BITS-1 downto 0 => '0');
|
|
|
|
|
|
-- Do we have a valid request in the WB latch ?
|
|
if state = IDLE then
|
|
valid := wb_req.cyc and wb_req.stb;
|
|
else
|
|
valid := '0';
|
|
end if;
|
|
|
|
-- Store signals
|
|
req_ad3 <= wb_req.adr(3);
|
|
req_wdata <= wb_req.dat & wb_req.dat;
|
|
req_we <= wb_req.sel & "00000000" when req_ad3 = '1' else
|
|
"00000000" & wb_req.sel;
|
|
|
|
-- Test if pending request is a hit on any way
|
|
hit_way := 0;
|
|
is_hit := '0';
|
|
for i in way_t loop
|
|
if valid = '1' and cache_valids(req_index)(i) = '1' then
|
|
if read_tag(i, cache_tags(req_index)) = req_tag then
|
|
hit_way := i;
|
|
is_hit := '1';
|
|
end if;
|
|
end if;
|
|
end loop;
|
|
|
|
-- Generate the req op. We only allow OP_LOAD_* when in the
|
|
-- IDLE state as our PLRU and ACK generation rely on this,
|
|
-- stores are allowed in IDLE state.
|
|
--
|
|
req_op <= OP_NONE;
|
|
if valid = '1' then
|
|
if wb_req.we = '1' then
|
|
if is_hit = '1' then
|
|
req_op <= OP_STORE_HIT;
|
|
else
|
|
req_op <= OP_STORE_MISS;
|
|
end if;
|
|
else
|
|
if is_hit = '1' then
|
|
req_op <= OP_LOAD_HIT;
|
|
else
|
|
req_op <= OP_LOAD_MISS;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
req_hit_way <= hit_way;
|
|
end process;
|
|
|
|
--
|
|
-- Store queue
|
|
--
|
|
-- For now, queue up to 16 stores
|
|
store_queue: entity work.sync_fifo
|
|
generic map (
|
|
DEPTH => STOREQ_DEPTH,
|
|
WIDTH => STOREQ_BITS
|
|
)
|
|
port map (
|
|
clk => system_clk,
|
|
reset => system_reset,
|
|
rd_ready => storeq_rd_ready,
|
|
rd_valid => storeq_rd_valid,
|
|
rd_data => storeq_rd_data,
|
|
wr_ready => storeq_wr_ready,
|
|
wr_valid => storeq_wr_valid,
|
|
wr_data => storeq_wr_data
|
|
);
|
|
|
|
storeq_control : process(all)
|
|
variable stq_data : wishbone_data_type;
|
|
variable stq_sel : std_ulogic_vector(DRAM_SBITS-1 downto 0);
|
|
begin
|
|
storeq_wr_data <= wb_req.dat & req_we;
|
|
|
|
-- Only accept store if we can send a command
|
|
if req_op = OP_STORE_HIT or req_op = OP_STORE_MISS then
|
|
storeq_wr_valid <= user_port0_cmd_ready;
|
|
else
|
|
storeq_wr_valid <= '0';
|
|
end if;
|
|
|
|
stq_data := storeq_rd_data(storeq_rd_data'left downto DRAM_SBITS);
|
|
stq_sel := storeq_rd_data(DRAM_SBITS-1 downto 0);
|
|
user_port0_wdata_data <= stq_data & stq_data;
|
|
user_port0_wdata_we <= stq_sel;
|
|
user_port0_wdata_valid <= storeq_rd_valid;
|
|
storeq_rd_ready <= user_port0_wdata_ready;
|
|
|
|
if TRACE then
|
|
if rising_edge(system_clk) then
|
|
if req_op = OP_STORE_HIT then
|
|
report "Store hit to:" &
|
|
to_hstring(wb_req.adr(DRAM_ABITS+3 downto 0)) &
|
|
" data:" & to_hstring(req_wdata) &
|
|
" we:" & to_hstring(req_we) &
|
|
" V:" & std_ulogic'image(accept_store);
|
|
else
|
|
report "Store miss to:" &
|
|
to_hstring(wb_req.adr(DRAM_ABITS+3 downto 0)) &
|
|
" data:" & to_hstring(req_wdata) &
|
|
" we:" & to_hstring(req_we) &
|
|
" V:" & std_ulogic'image(accept_store);
|
|
end if;
|
|
if storeq_wr_valid = '1' and storeq_wr_ready = '1' then
|
|
report "storeq push " & to_hstring(storeq_wr_data);
|
|
end if;
|
|
if storeq_rd_valid = '1' and storeq_rd_ready = '1' then
|
|
report "storeq pop " & to_hstring(storeq_rd_data);
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- LiteDRAM command mux
|
|
dram_commands: process(all)
|
|
begin
|
|
if state = IDLE and (req_op = OP_STORE_HIT or req_op = OP_STORE_MISS) then
|
|
-- For stores, forward signals directly. Only send command if
|
|
-- the FIFO can accept a store
|
|
user_port0_cmd_addr <= wb_req.adr(DRAM_ABITS+3 downto 4);
|
|
user_port0_cmd_we <= '1';
|
|
user_port0_cmd_valid <= storeq_wr_ready;
|
|
else
|
|
-- For loads, we route via a latch controlled by the refill machine
|
|
user_port0_cmd_addr <= refill_cmd_addr;
|
|
user_port0_cmd_valid <= refill_cmd_valid;
|
|
user_port0_cmd_we <= '0';
|
|
end if;
|
|
user_port0_rdata_ready <= '1'; -- Always 1
|
|
end process;
|
|
|
|
-- LiteDRAM refill machine
|
|
--
|
|
-- This handles the cache line refills
|
|
--
|
|
refill_machine : process(system_clk)
|
|
variable tagset : cache_tags_set_t;
|
|
variable cmds_done : boolean;
|
|
variable replace_way : way_t;
|
|
variable wait_qdrain : boolean;
|
|
begin
|
|
if rising_edge(system_clk) then
|
|
-- On reset, clear all valid bits to force misses
|
|
if system_reset = '1' then
|
|
for i in index_t loop
|
|
cache_valids(i) <= (others => '0');
|
|
end loop;
|
|
state <= IDLE;
|
|
refill_cmd_valid <= '0';
|
|
else
|
|
-- Main state machine
|
|
case state is
|
|
when IDLE =>
|
|
assert refill_cmd_valid = '0' report "refill cmd valid in IDLE state !"
|
|
severity failure;
|
|
|
|
-- If NO_LS_OVERLAP is set, disallow a load miss if the store
|
|
-- queue still has data in it.
|
|
wait_qdrain := false;
|
|
if NO_LS_OVERLAP then
|
|
wait_qdrain := storeq_rd_valid = '1';
|
|
end if;
|
|
|
|
-- We need to read a cache line
|
|
if req_op = OP_LOAD_MISS and not wait_qdrain then
|
|
-- Grab way to replace
|
|
replace_way := to_integer(unsigned(plru_victim(req_index)));
|
|
|
|
-- Force misses on that way while refilling that line
|
|
cache_valids(req_index)(replace_way) <= '0';
|
|
|
|
-- Store new tag in selected way
|
|
for i in 0 to NUM_WAYS-1 loop
|
|
if i = replace_way then
|
|
tagset := cache_tags(req_index);
|
|
write_tag(i, tagset, req_tag);
|
|
cache_tags(req_index) <= tagset;
|
|
end if;
|
|
end loop;
|
|
|
|
-- Keep track of our index and way for subsequent stores
|
|
refill_index <= req_index;
|
|
refill_way <= replace_way;
|
|
refill_row <= get_row(req_laddr);
|
|
|
|
-- Prep for first DRAM read
|
|
--
|
|
-- XXX TODO: We could start a cycle early here by using
|
|
-- combo logic to generate the first command in
|
|
-- "dram_commands". In fact, we could make refill_cmd_addr
|
|
-- only contain the "counter" bits and wire it with the
|
|
-- other bits from req_laddr.
|
|
refill_cmd_addr <= req_laddr(DRAM_ABITS+3 downto 4);
|
|
refill_cmd_valid <= '1';
|
|
|
|
if TRACE then
|
|
report "refill addr " & to_hstring(req_laddr);
|
|
end if;
|
|
|
|
-- Track that we had one request sent
|
|
state <= REFILL_WAIT_ACK;
|
|
end if;
|
|
|
|
when REFILL_WAIT_ACK =>
|
|
-- Commands are all sent if user_port0_cmd_valid is 0
|
|
cmds_done := refill_cmd_valid = '0';
|
|
|
|
-- If we are still sending requests, was one accepted ?
|
|
if user_port0_cmd_ready = '1' and not cmds_done then
|
|
-- That was the last word ? We are done sending. Clear
|
|
-- command valid and set cmds_done so we can handle an
|
|
-- eventual last ack on the same cycle.
|
|
--
|
|
if TRACE then
|
|
report "got refill cmd ack !";
|
|
end if;
|
|
if is_last_row_addr(refill_cmd_addr) then
|
|
refill_cmd_valid <= '0';
|
|
cmds_done := true;
|
|
if TRACE then
|
|
report "all refill cmds done !";
|
|
end if;
|
|
else
|
|
-- Calculate the next row address
|
|
refill_cmd_addr <= next_row_addr(refill_cmd_addr);
|
|
if TRACE then
|
|
report "refill addr " &
|
|
to_hstring(next_row_addr(refill_cmd_addr));
|
|
end if;
|
|
end if;
|
|
end if;
|
|
|
|
-- Incoming read data processing
|
|
if user_port0_rdata_valid = '1' then
|
|
if TRACE then
|
|
report "got refill data ack !";
|
|
end if;
|
|
-- Check for completion
|
|
if cmds_done and is_last_row(refill_row) then
|
|
if TRACE then
|
|
report "all refill data done !";
|
|
end if;
|
|
-- Cache line is now valid
|
|
cache_valids(refill_index)(refill_way) <= '1';
|
|
-- We are done
|
|
state <= IDLE;
|
|
end if;
|
|
|
|
-- Increment store row counter
|
|
refill_row <= next_row(refill_row);
|
|
end if;
|
|
end case;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
may_trace: if LITEDRAM_TRACE generate
|
|
component litedram_trace_stub
|
|
end component;
|
|
begin
|
|
litedram_trace: litedram_trace_stub;
|
|
end generate;
|
|
|
|
litedram: litedram_core
|
|
port map(
|
|
clk => clk_in,
|
|
rst => rst,
|
|
pll_locked => pll_locked,
|
|
ddram_a => ddram_a,
|
|
ddram_ba => ddram_ba,
|
|
ddram_ras_n => ddram_ras_n,
|
|
ddram_cas_n => ddram_cas_n,
|
|
ddram_we_n => ddram_we_n,
|
|
ddram_cs_n => ddram_cs_n,
|
|
ddram_dm => ddram_dm,
|
|
ddram_dq => ddram_dq,
|
|
ddram_dqs_p => ddram_dqs_p,
|
|
ddram_dqs_n => ddram_dqs_n,
|
|
ddram_clk_p => ddram_clk_p,
|
|
ddram_clk_n => ddram_clk_n,
|
|
ddram_cke => ddram_cke,
|
|
ddram_odt => ddram_odt,
|
|
ddram_reset_n => ddram_reset_n,
|
|
init_done => init_done,
|
|
init_error => init_error,
|
|
user_clk => system_clk,
|
|
user_rst => system_reset,
|
|
wb_ctrl_adr => wb_ctrl_adr,
|
|
wb_ctrl_dat_w => wb_ctrl_dat_w,
|
|
wb_ctrl_dat_r => wb_ctrl_dat_r,
|
|
wb_ctrl_sel => wb_ctrl_sel,
|
|
wb_ctrl_cyc => wb_ctrl_cyc,
|
|
wb_ctrl_stb => wb_ctrl_stb,
|
|
wb_ctrl_ack => wb_ctrl_ack,
|
|
wb_ctrl_we => wb_ctrl_we,
|
|
wb_ctrl_cti => "000",
|
|
wb_ctrl_bte => "00",
|
|
wb_ctrl_err => open,
|
|
user_port_native_0_cmd_valid => user_port0_cmd_valid,
|
|
user_port_native_0_cmd_ready => user_port0_cmd_ready,
|
|
user_port_native_0_cmd_we => user_port0_cmd_we,
|
|
user_port_native_0_cmd_addr => user_port0_cmd_addr,
|
|
user_port_native_0_wdata_valid => user_port0_wdata_valid,
|
|
user_port_native_0_wdata_ready => user_port0_wdata_ready,
|
|
user_port_native_0_wdata_we => user_port0_wdata_we,
|
|
user_port_native_0_wdata_data => user_port0_wdata_data,
|
|
user_port_native_0_rdata_valid => user_port0_rdata_valid,
|
|
user_port_native_0_rdata_ready => user_port0_rdata_ready,
|
|
user_port_native_0_rdata_data => user_port0_rdata_data
|
|
);
|
|
|
|
end architecture behaviour;
|