execute1: Move data-path logic out to a separate process

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
cache-tlb-parameters-2
Paul Mackerras 4 years ago
parent ae2afeca5c
commit d6ac43251a

@ -93,6 +93,7 @@ architecture behaviour of execute1 is


signal a_in, b_in, c_in : std_ulogic_vector(63 downto 0); signal a_in, b_in, c_in : std_ulogic_vector(63 downto 0);
signal cr_in : std_ulogic_vector(31 downto 0); signal cr_in : std_ulogic_vector(31 downto 0);
signal xerc_in : xer_common_t;


signal valid_in : std_ulogic; signal valid_in : std_ulogic;
signal ctrl: ctrl_t := (irq_state => WRITE_SRR0, others => (others => '0')); signal ctrl: ctrl_t := (irq_state => WRITE_SRR0, others => (others => '0'));
@ -113,6 +114,15 @@ architecture behaviour of execute1 is
signal next_nia : std_ulogic_vector(63 downto 0); signal next_nia : std_ulogic_vector(63 downto 0);
signal current: Decode2ToExecute1Type; signal current: Decode2ToExecute1Type;


signal carry_32 : std_ulogic;
signal carry_64 : std_ulogic;
signal overflow_32 : std_ulogic;
signal overflow_64 : std_ulogic;

signal cmprb_result : std_ulogic_vector(3 downto 0);
signal cmpeqb_result : std_ulogic_vector(3 downto 0);
signal trapval : std_ulogic_vector(4 downto 0);

-- multiply signals -- multiply signals
signal x_to_multiply: MultiplyInputType; signal x_to_multiply: MultiplyInputType;
signal multiply_to_x: MultiplyOutputType; signal multiply_to_x: MultiplyOutputType;
@ -288,6 +298,14 @@ begin
a_in <= e_in.read_data1; a_in <= e_in.read_data1;
b_in <= e_in.read_data2; b_in <= e_in.read_data2;
c_in <= e_in.read_data3; c_in <= e_in.read_data3;
cr_in <= e_in.cr;

-- XER forwarding. To avoid having to track XER hazards, we use
-- the previously latched value. Since the XER common bits
-- (SO, OV[32] and CA[32]) are only modified by instructions that are
-- handled here, we can just forward the result being sent to
-- writeback.
xerc_in <= r.e.xerc when r.e.write_xerc_enable = '1' or r.busy = '1' else e_in.xerc;


busy_out <= l_in.busy or r.busy or fp_in.busy; busy_out <= l_in.busy or r.busy or fp_in.busy;
valid_in <= e_in.valid and not busy_out; valid_in <= e_in.valid and not busy_out;
@ -328,101 +346,30 @@ begin
end if; end if;
end process; end process;


execute1_1: process(all) -- Data path for integer instructions
variable v : reg_type; execute1_dp: process(all)
variable a_inv : std_ulogic_vector(63 downto 0); variable a_inv : std_ulogic_vector(63 downto 0);
variable b_or_m1 : std_ulogic_vector(63 downto 0); variable b_or_m1 : std_ulogic_vector(63 downto 0);
variable sum_with_carry : std_ulogic_vector(64 downto 0);
variable sign1, sign2 : std_ulogic;
variable abs1, abs2 : signed(63 downto 0);
variable addend : std_ulogic_vector(127 downto 0);
variable addg6s : std_ulogic_vector(63 downto 0); variable addg6s : std_ulogic_vector(63 downto 0);
variable crbit : integer range 0 to 31;
variable isel_result : std_ulogic_vector(63 downto 0); variable isel_result : std_ulogic_vector(63 downto 0);
variable darn : std_ulogic_vector(63 downto 0); variable darn : std_ulogic_vector(63 downto 0);
variable mfcr_result : std_ulogic_vector(63 downto 0);
variable setb_result : std_ulogic_vector(63 downto 0); variable setb_result : std_ulogic_vector(63 downto 0);
variable newcrf : std_ulogic_vector(3 downto 0); variable mfcr_result : std_ulogic_vector(63 downto 0);
variable sum_with_carry : std_ulogic_vector(64 downto 0);
variable crnum : crnum_t; variable crnum : crnum_t;
variable crbit : integer range 0 to 31;
variable scrnum : crnum_t;
variable lo, hi : integer; variable lo, hi : integer;
variable sh, mb, me : std_ulogic_vector(5 downto 0);
variable sh32, mb32, me32 : std_ulogic_vector(4 downto 0);
variable bo, bi : std_ulogic_vector(4 downto 0);
variable bf, bfa : std_ulogic_vector(2 downto 0);
variable cr_op : std_ulogic_vector(9 downto 0);
variable cr_operands : std_ulogic_vector(1 downto 0);
variable bt, ba, bb : std_ulogic_vector(4 downto 0);
variable btnum, banum, bbnum : integer range 0 to 31;
variable crresult : std_ulogic;
variable l : std_ulogic; variable l : std_ulogic;
variable carry_32, carry_64 : std_ulogic;
variable sign1, sign2 : std_ulogic;
variable abs1, abs2 : signed(63 downto 0);
variable overflow : std_ulogic;
variable zerohi, zerolo : std_ulogic; variable zerohi, zerolo : std_ulogic;
variable msb_a, msb_b : std_ulogic; variable msb_a, msb_b : std_ulogic;
variable a_lt : std_ulogic; variable a_lt : std_ulogic;
variable a_lt_lo : std_ulogic; variable a_lt_lo : std_ulogic;
variable a_lt_hi : std_ulogic; variable a_lt_hi : std_ulogic;
variable lv : Execute1ToLoadstore1Type; variable bfa : std_ulogic_vector(2 downto 0);
variable irq_valid : std_ulogic;
variable exception : std_ulogic;
variable exception_nextpc : std_ulogic;
variable trapval : std_ulogic_vector(4 downto 0);
variable illegal : std_ulogic;
variable is_branch : std_ulogic;
variable is_direct_branch : std_ulogic;
variable taken_branch : std_ulogic;
variable abs_branch : std_ulogic;
variable spr_val : std_ulogic_vector(63 downto 0);
variable addend : std_ulogic_vector(127 downto 0);
variable do_trace : std_ulogic;
variable hold_wr_data : std_ulogic;
variable f : Execute1ToFetch1Type;
variable fv : Execute1ToFPUType;
begin begin
sum_with_carry := (others => '0');
newcrf := (others => '0');
is_branch := '0';
is_direct_branch := '0';
taken_branch := '0';
abs_branch := '0';
hold_wr_data := '0';

v := r;
v.e := Execute1ToWritebackInit;
v.redirect := '0';
v.abs_br := '0';
v.do_intr := '0';
v.vector := 0;
v.br_offset := (others => '0');
v.redir_mode := ctrl.msr(MSR_IR) & not ctrl.msr(MSR_PR) &
not ctrl.msr(MSR_LE) & not ctrl.msr(MSR_SF);
v.taken_br := '0';
v.br_last := '0';

lv := Execute1ToLoadstore1Init;
fv := Execute1ToFPUInit;

-- XER forwarding. To avoid having to track XER hazards, we use
-- the previously latched value. Since the XER common bits
-- (SO, OV[32] and CA[32]) are only modified by instructions that are
-- handled here, we can just forward the result being sent to
-- writeback.
if r.e.write_xerc_enable = '1' or r.busy = '1' then
v.e.xerc := r.e.xerc;
else
v.e.xerc := e_in.xerc;
end if;

cr_in <= e_in.cr;

v.mul_in_progress := '0';
v.div_in_progress := '0';
v.cntz_in_progress := '0';
v.mul_finish := '0';

spr_result <= (others => '0');
spr_val := (others => '0');

-- Main adder -- Main adder
if e_in.invert_a = '0' then if e_in.invert_a = '0' then
a_inv := a_in; a_inv := a_in;
@ -435,10 +382,12 @@ begin
b_or_m1 := (others => '1'); b_or_m1 := (others => '1');
end if; end if;
sum_with_carry := ppc_adde(a_inv, b_or_m1, sum_with_carry := ppc_adde(a_inv, b_or_m1,
decode_input_carry(e_in.input_carry, v.e.xerc)); decode_input_carry(e_in.input_carry, xerc_in));
adder_result <= sum_with_carry(63 downto 0); adder_result <= sum_with_carry(63 downto 0);
carry_32 := sum_with_carry(32) xor a_inv(32) xor b_in(32); carry_32 <= sum_with_carry(32) xor a_inv(32) xor b_in(32);
carry_64 := sum_with_carry(64); carry_64 <= sum_with_carry(64);
overflow_32 <= calc_ov(a_inv(31), b_in(31), carry_32, sum_with_carry(31));
overflow_64 <= calc_ov(a_inv(63), b_in(63), carry_64, sum_with_carry(63));


-- signals to multiply and divide units -- signals to multiply and divide units
sign1 := '0'; sign1 := '0';
@ -465,12 +414,10 @@ begin
end if; end if;


-- Interface to multiply and divide units -- Interface to multiply and divide units
x_to_multiply <= MultiplyInputInit;
x_to_multiply.is_32bit <= e_in.is_32bit;

x_to_divider <= Execute1ToDividerInit;
x_to_divider.is_signed <= e_in.is_signed; x_to_divider.is_signed <= e_in.is_signed;
x_to_divider.is_32bit <= e_in.is_32bit; x_to_divider.is_32bit <= e_in.is_32bit;
x_to_divider.is_extended <= '0';
x_to_divider.is_modulus <= '0';
if e_in.insn_type = OP_MOD then if e_in.insn_type = OP_MOD then
x_to_divider.is_modulus <= '1'; x_to_divider.is_modulus <= '1';
end if; end if;
@ -487,6 +434,7 @@ begin
addend := not addend; addend := not addend;
end if; end if;


x_to_multiply.is_32bit <= e_in.is_32bit;
x_to_multiply.not_result <= sign1 xor sign2; x_to_multiply.not_result <= sign1 xor sign2;
x_to_multiply.addend <= addend; x_to_multiply.addend <= addend;
x_to_divider.neg_result <= sign1 xor (sign2 and not x_to_divider.is_modulus); x_to_divider.neg_result <= sign1 xor (sign2 and not x_to_divider.is_modulus);
@ -611,7 +559,7 @@ begin
zerohi := not (or (a_in(63 downto 32) xor b_in(63 downto 32))); zerohi := not (or (a_in(63 downto 32) xor b_in(63 downto 32)));
if zerolo = '1' and (l = '0' or zerohi = '1') then if zerolo = '1' and (l = '0' or zerohi = '1') then
-- values are equal -- values are equal
trapval := "00100"; trapval <= "00100";
else else
a_lt_lo := '0'; a_lt_lo := '0';
a_lt_hi := '0'; a_lt_hi := '0';
@ -635,14 +583,81 @@ begin
if msb_a /= msb_b then if msb_a /= msb_b then
-- Comparison is clear from MSB difference. -- Comparison is clear from MSB difference.
-- for signed, 0 is greater; for unsigned, 1 is greater -- for signed, 0 is greater; for unsigned, 1 is greater
trapval := msb_a & msb_b & '0' & msb_b & msb_a; trapval <= msb_a & msb_b & '0' & msb_b & msb_a;
else else
-- MSBs are equal, so signed and unsigned comparisons give the -- MSBs are equal, so signed and unsigned comparisons give the
-- same answer. -- same answer.
trapval := a_lt & not a_lt & '0' & a_lt & not a_lt; trapval <= a_lt & not a_lt & '0' & a_lt & not a_lt;
end if; end if;
end if; end if;


cmprb_result <= ppc_cmprb(a_in, b_in, insn_l(e_in.insn));
cmpeqb_result <= ppc_cmpeqb(a_in, b_in);
end process;

execute1_1: process(all)
variable v : reg_type;
variable newcrf : std_ulogic_vector(3 downto 0);
variable crnum : crnum_t;
variable scrnum : crnum_t;
variable lo, hi : integer;
variable sh, mb, me : std_ulogic_vector(5 downto 0);
variable bo, bi : std_ulogic_vector(4 downto 0);
variable bf, bfa : std_ulogic_vector(2 downto 0);
variable cr_op : std_ulogic_vector(9 downto 0);
variable cr_operands : std_ulogic_vector(1 downto 0);
variable bt, ba, bb : std_ulogic_vector(4 downto 0);
variable btnum, banum, bbnum : integer range 0 to 31;
variable crresult : std_ulogic;
variable overflow : std_ulogic;
variable lv : Execute1ToLoadstore1Type;
variable irq_valid : std_ulogic;
variable exception : std_ulogic;
variable exception_nextpc : std_ulogic;
variable illegal : std_ulogic;
variable is_branch : std_ulogic;
variable is_direct_branch : std_ulogic;
variable taken_branch : std_ulogic;
variable abs_branch : std_ulogic;
variable spr_val : std_ulogic_vector(63 downto 0);
variable do_trace : std_ulogic;
variable hold_wr_data : std_ulogic;
variable f : Execute1ToFetch1Type;
variable fv : Execute1ToFPUType;
begin
newcrf := (others => '0');
is_branch := '0';
is_direct_branch := '0';
taken_branch := '0';
abs_branch := '0';
hold_wr_data := '0';

v := r;
v.e := Execute1ToWritebackInit;
v.redirect := '0';
v.abs_br := '0';
v.do_intr := '0';
v.vector := 0;
v.br_offset := (others => '0');
v.redir_mode := ctrl.msr(MSR_IR) & not ctrl.msr(MSR_PR) &
not ctrl.msr(MSR_LE) & not ctrl.msr(MSR_SF);
v.taken_br := '0';
v.br_last := '0';
v.e.xerc := xerc_in;

lv := Execute1ToLoadstore1Init;
fv := Execute1ToFPUInit;

x_to_multiply.valid <= '0';
x_to_divider.valid <= '0';
v.mul_in_progress := '0';
v.div_in_progress := '0';
v.cntz_in_progress := '0';
v.mul_finish := '0';

spr_result <= (others => '0');
spr_val := (others => '0');

ctrl_tmp <= ctrl; ctrl_tmp <= ctrl;
-- FIXME: run at 512MHz not core freq -- FIXME: run at 512MHz not core freq
ctrl_tmp.tb <= std_ulogic_vector(unsigned(ctrl.tb) + 1); ctrl_tmp.tb <= std_ulogic_vector(unsigned(ctrl.tb) + 1);
@ -789,16 +804,14 @@ begin
end if; end if;
end if; end if;
if e_in.oe = '1' then if e_in.oe = '1' then
set_ov(v.e, set_ov(v.e, overflow_64, overflow_32);
calc_ov(a_inv(63), b_in(63), carry_64, sum_with_carry(63)),
calc_ov(a_inv(31), b_in(31), carry_32, sum_with_carry(31)));
end if; end if;
when OP_CMP => when OP_CMP =>
-- CMP and CMPL instructions -- CMP and CMPL instructions
if e_in.is_signed = '1' then if e_in.is_signed = '1' then
newcrf := trapval(4 downto 2) & v.e.xerc.so; newcrf := trapval(4 downto 2) & xerc_in.so;
else else
newcrf := trapval(1 downto 0) & trapval(2) & v.e.xerc.so; newcrf := trapval(1 downto 0) & trapval(2) & xerc_in.so;
end if; end if;
bf := insn_bf(e_in.insn); bf := insn_bf(e_in.insn);
crnum := to_integer(unsigned(bf)); crnum := to_integer(unsigned(bf));
@ -820,14 +833,14 @@ begin
end if; end if;
when OP_ADDG6S => when OP_ADDG6S =>
when OP_CMPRB => when OP_CMPRB =>
newcrf := ppc_cmprb(a_in, b_in, insn_l(e_in.insn)); newcrf := cmprb_result;
bf := insn_bf(e_in.insn); bf := insn_bf(e_in.insn);
crnum := to_integer(unsigned(bf)); crnum := to_integer(unsigned(bf));
v.e.write_cr_mask := num_to_fxm(crnum); v.e.write_cr_mask := num_to_fxm(crnum);
v.e.write_cr_data := newcrf & newcrf & newcrf & newcrf & v.e.write_cr_data := newcrf & newcrf & newcrf & newcrf &
newcrf & newcrf & newcrf & newcrf; newcrf & newcrf & newcrf & newcrf;
when OP_CMPEQB => when OP_CMPEQB =>
newcrf := ppc_cmpeqb(a_in, b_in); newcrf := cmpeqb_result;
bf := insn_bf(e_in.insn); bf := insn_bf(e_in.insn);
crnum := to_integer(unsigned(bf)); crnum := to_integer(unsigned(bf));
v.e.write_cr_mask := num_to_fxm(crnum); v.e.write_cr_mask := num_to_fxm(crnum);
@ -939,7 +952,7 @@ begin
end loop; end loop;
end if; end if;
when OP_MCRXRX => when OP_MCRXRX =>
newcrf := v.e.xerc.ov & v.e.xerc.ca & v.e.xerc.ov32 & v.e.xerc.ca32; newcrf := xerc_in.ov & xerc_in.ca & xerc_in.ov32 & xerc_in.ca32;
bf := insn_bf(e_in.insn); bf := insn_bf(e_in.insn);
crnum := to_integer(unsigned(bf)); crnum := to_integer(unsigned(bf));
v.e.write_cr_mask := num_to_fxm(crnum); v.e.write_cr_mask := num_to_fxm(crnum);
@ -955,12 +968,12 @@ begin
if decode_spr_num(e_in.insn) = SPR_XER then if decode_spr_num(e_in.insn) = SPR_XER then
-- bits 0:31 and 35:43 are treated as reserved and return 0s when read using mfxer -- bits 0:31 and 35:43 are treated as reserved and return 0s when read using mfxer
spr_val(63 downto 32) := (others => '0'); spr_val(63 downto 32) := (others => '0');
spr_val(63-32) := v.e.xerc.so; spr_val(63-32) := xerc_in.so;
spr_val(63-33) := v.e.xerc.ov; spr_val(63-33) := xerc_in.ov;
spr_val(63-34) := v.e.xerc.ca; spr_val(63-34) := xerc_in.ca;
spr_val(63-35 downto 63-43) := "000000000"; spr_val(63-35 downto 63-43) := "000000000";
spr_val(63-44) := v.e.xerc.ov32; spr_val(63-44) := xerc_in.ov32;
spr_val(63-45) := v.e.xerc.ca32; spr_val(63-45) := xerc_in.ca32;
end if; end if;
else else
spr_val := c_in; spr_val := c_in;
@ -1319,7 +1332,7 @@ begin
lv.byte_reverse := e_in.byte_reverse xnor ctrl.msr(MSR_LE); lv.byte_reverse := e_in.byte_reverse xnor ctrl.msr(MSR_LE);
lv.sign_extend := e_in.sign_extend; lv.sign_extend := e_in.sign_extend;
lv.update := e_in.update; lv.update := e_in.update;
lv.xerc := v.e.xerc; lv.xerc := xerc_in;
lv.reserve := e_in.reserve; lv.reserve := e_in.reserve;
lv.rc := e_in.rc; lv.rc := e_in.rc;
lv.insn := e_in.insn; lv.insn := e_in.insn;

Loading…
Cancel
Save