Merge pull request #213 from ozbenh/uart16550

Add support for standard 16550 style UART
jtag-port
Michael Neuling 4 years ago committed by GitHub
commit 57604c1a6e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

@ -55,8 +55,9 @@ soc_files = $(core_files) wishbone_arbiter.vhdl wishbone_bram_wrapper.vhdl sync_
spi_rxtx.vhdl spi_flash_ctrl.vhdl spi_rxtx.vhdl spi_flash_ctrl.vhdl




soc_sim_files = $(soc_files) sim_console.vhdl sim_uart.vhdl sim_bram_helpers.vhdl \ soc_sim_files = $(soc_files) sim_console.vhdl sim_pp_uart.vhdl sim_bram_helpers.vhdl \
sim_bram.vhdl sim_jtag_socket.vhdl sim_jtag.vhdl dmi_dtm_xilinx.vhdl sim_bram.vhdl sim_jtag_socket.vhdl sim_jtag.vhdl dmi_dtm_xilinx.vhdl \
sim_16550_uart.vhdl


soc_sim_c_files = sim_vhpi_c.c sim_bram_helpers_c.c sim_console_c.c \ soc_sim_c_files = sim_vhpi_c.c sim_bram_helpers_c.c sim_console_c.c \
sim_jtag_socket_c.c sim_jtag_socket_c.c

@ -27,6 +27,7 @@ package common is
constant SPR_DSISR : spr_num_t := 18; constant SPR_DSISR : spr_num_t := 18;
constant SPR_DAR : spr_num_t := 19; constant SPR_DAR : spr_num_t := 19;
constant SPR_TB : spr_num_t := 268; constant SPR_TB : spr_num_t := 268;
constant SPR_TBU : spr_num_t := 269;
constant SPR_DEC : spr_num_t := 22; constant SPR_DEC : spr_num_t := 22;
constant SPR_SRR0 : spr_num_t := 26; constant SPR_SRR0 : spr_num_t := 26;
constant SPR_SRR1 : spr_num_t := 27; constant SPR_SRR1 : spr_num_t := 27;

@ -752,6 +752,9 @@ begin
case decode_spr_num(e_in.insn) is case decode_spr_num(e_in.insn) is
when SPR_TB => when SPR_TB =>
spr_val := ctrl.tb; spr_val := ctrl.tb;
when SPR_TBU =>
spr_val(63 downto 32) := (others => '0');
spr_val(31 downto 0) := ctrl.tb(63 downto 32);
when SPR_DEC => when SPR_DEC =>
spr_val := ctrl.dec; spr_val := ctrl.dec;
when 724 => -- LOG_ADDR SPR when 724 => -- LOG_ADDR SPR

@ -13,10 +13,10 @@ set_property -dict { PACKAGE_PIN A9 IOSTANDARD LVCMOS33 } [get_ports { uart_mai
# Pmod Header JC: UART (bottom) # Pmod Header JC: UART (bottom)
################################################################################ ################################################################################


#set_property -dict { PACKAGE_PIN U14 IOSTANDARD LVCMOS33 } [get_ports { uart_pmod_cts_n }]; set_property -dict { PACKAGE_PIN U14 IOSTANDARD LVCMOS33 } [get_ports { uart_pmod_cts_n }];
#set_property -dict { PACKAGE_PIN V14 IOSTANDARD LVCMOS33 } [get_ports { uart_pmod_tx }]; set_property -dict { PACKAGE_PIN V14 IOSTANDARD LVCMOS33 } [get_ports { uart_pmod_tx }];
#set_property -dict { PACKAGE_PIN T13 IOSTANDARD LVCMOS33 } [get_ports { uart_pmod_rx }]; set_property -dict { PACKAGE_PIN T13 IOSTANDARD LVCMOS33 } [get_ports { uart_pmod_rx }];
#set_property -dict { PACKAGE_PIN U13 IOSTANDARD LVCMOS33 } [get_ports { uart_pmod_rts_n }]; set_property -dict { PACKAGE_PIN U13 IOSTANDARD LVCMOS33 } [get_ports { uart_pmod_rts_n }];


################################################################################ ################################################################################
# RGB LEDs # RGB LEDs

@ -22,7 +22,9 @@ entity toplevel is
SPI_FLASH_DEF_CKDV : natural := 1; SPI_FLASH_DEF_CKDV : natural := 1;
SPI_FLASH_DEF_QUAD : boolean := true; SPI_FLASH_DEF_QUAD : boolean := true;
LOG_LENGTH : natural := 512; LOG_LENGTH : natural := 512;
USE_LITEETH : boolean := false USE_LITEETH : boolean := false;
UART_IS_16550 : boolean := false;
HAS_UART1 : boolean := true
); );
port( port(
ext_clk : in std_ulogic; ext_clk : in std_ulogic;
@ -32,6 +34,12 @@ entity toplevel is
uart_main_tx : out std_ulogic; uart_main_tx : out std_ulogic;
uart_main_rx : in std_ulogic; uart_main_rx : in std_ulogic;


-- UART1 signals:
uart_pmod_tx : out std_ulogic;
uart_pmod_rx : in std_ulogic;
uart_pmod_cts_n : in std_ulogic;
uart_pmod_rts_n : out std_ulogic;

-- LEDs -- LEDs
led0_b : out std_ulogic; led0_b : out std_ulogic;
led0_g : out std_ulogic; led0_g : out std_ulogic;
@ -170,7 +178,9 @@ begin
SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV, SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV,
SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD, SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD,
LOG_LENGTH => LOG_LENGTH, LOG_LENGTH => LOG_LENGTH,
USE_LITEETH => USE_LITEETH HAS_LITEETH => USE_LITEETH,
UART0_IS_16550 => UART_IS_16550,
HAS_UART1 => HAS_UART1
) )
port map ( port map (
-- System signals -- System signals
@ -181,6 +191,10 @@ begin
uart0_txd => uart_main_tx, uart0_txd => uart_main_tx,
uart0_rxd => uart_main_rx, uart0_rxd => uart_main_rx,


-- UART1 signals
uart1_txd => uart_pmod_tx,
uart1_rxd => uart_pmod_rx,

-- SPI signals -- SPI signals
spi_flash_sck => spi_sck, spi_flash_sck => spi_sck,
spi_flash_cs_n => spi_cs_n, spi_flash_cs_n => spi_cs_n,
@ -202,6 +216,8 @@ begin
alt_reset => core_alt_reset alt_reset => core_alt_reset
); );


uart_pmod_rts_n <= '0';

-- SPI Flash -- SPI Flash
-- --
-- Note: Unlike many other boards, the SPI flash on the Arty has -- Note: Unlike many other boards, the SPI flash on the Arty has

@ -11,7 +11,8 @@ entity toplevel is
RESET_LOW : boolean := true; RESET_LOW : boolean := true;
CLK_INPUT : positive := 100000000; CLK_INPUT : positive := 100000000;
CLK_FREQUENCY : positive := 100000000; CLK_FREQUENCY : positive := 100000000;
DISABLE_FLATTEN_CORE : boolean := false DISABLE_FLATTEN_CORE : boolean := false;
UART_IS_16550 : boolean := true
); );
port( port(
ext_clk : in std_ulogic; ext_clk : in std_ulogic;
@ -67,7 +68,8 @@ begin
RAM_INIT_FILE => RAM_INIT_FILE, RAM_INIT_FILE => RAM_INIT_FILE,
SIM => false, SIM => false,
CLK_FREQ => CLK_FREQUENCY, CLK_FREQ => CLK_FREQUENCY,
DISABLE_FLATTEN_CORE => DISABLE_FLATTEN_CORE DISABLE_FLATTEN_CORE => DISABLE_FLATTEN_CORE,
UART0_IS_16550 => UART_IS_16550
) )
port map ( port map (
system_clk => system_clk, system_clk => system_clk,

@ -19,7 +19,8 @@ entity toplevel is
DISABLE_FLATTEN_CORE : boolean := false; DISABLE_FLATTEN_CORE : boolean := false;
SPI_FLASH_OFFSET : integer := 10485760; SPI_FLASH_OFFSET : integer := 10485760;
SPI_FLASH_DEF_CKDV : natural := 1; SPI_FLASH_DEF_CKDV : natural := 1;
SPI_FLASH_DEF_QUAD : boolean := true SPI_FLASH_DEF_QUAD : boolean := true;
UART_IS_16550 : boolean := true;
); );
port( port(
ext_clk : in std_ulogic; ext_clk : in std_ulogic;
@ -126,7 +127,8 @@ begin
SPI_FLASH_DLINES => 4, SPI_FLASH_DLINES => 4,
SPI_FLASH_OFFSET => SPI_FLASH_OFFSET, SPI_FLASH_OFFSET => SPI_FLASH_OFFSET,
SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV, SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV,
SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD,
UART0_IS_16550 => UART_IS_16550
) )
port map ( port map (
-- System signals -- System signals

Binary file not shown.

@ -7,7 +7,7 @@


int main(void) int main(void)
{ {
potato_uart_init(); console_init();


puts(HELLO_WORLD); puts(HELLO_WORLD);



Binary file not shown.

@ -514,73 +514,118 @@ e8010010ebc1fff0
7c0803a6ebe1fff8 7c0803a6ebe1fff8
3c4000014e800020 3c4000014e800020
7c0802a63842a000 7c0802a63842a000
3fe2fffffbe1fff8 f821ffe1f8010010
f80100103bff7240 60000000480001dd
48000051f821ffd1 386373a83c62ffff
7fe3fb7860000000 6000000048000141
60000000480001d5 600000004800002d
7fe3fb787c641b78 480000a95463063e
600000004800017d
60000000480000ed
480001295463063e
4bffffec60000000 4bffffec60000000
0100000000000000 0100000000000000
3c40000100000180 3c40000100000080
3d20c0003842a000
6129200060000000
f922800079290020
612900203d20c000
7c0004ac79290020
3d40001c7d204eea
7d295392614a2000
394a0018e9428000
7c0004ac3929ffff
4e8000207d2057ea
0000000000000000
3c40000100000000
600000003842a000 600000003842a000
394000ffe9228000 6000000039228000
7c0004ac39290020 8929000039428008
4e8000207d404fea 419e00302f890000
39290014e92a0000
7d204eaa7c0004ac
4182ffec71290001
7c0004ace86a0000
5463063e7c601eaa
e92a00004e800020
7c0004ac39290010
712900017d204eea
e86a00004082ffec
7c0004ac38630008
4bffffd07c601eea
0000000000000000 0000000000000000
3c40000100000000 3c40000100000000
600000003842a000 600000003842a000
39400000e9228000 6000000039228000
7c0004ac39290020 8929000039428008
4e8000207d404fea 419e002c2f890000
39290014e92a0000
7d204eaa7c0004ac
4182ffec71290020
7c0004ace92a0000
4e8000207c604faa
39290010e92a0000
7d204eea7c0004ac
4082ffec71290008
e94a00005469063e
7d2057ea7c0004ac
000000004e800020
0000000000000000
3842a0003c400001
fbc1fff07c0802a6
3bc3fffffbe1fff8
f821ffd1f8010010
2fbf00008ffe0001
38210030409e0010
4bfffe5c38600000
409e000c2b9f000a
4bffff413860000d
4bffff397fe3fb78
000000004bffffd0
0000028001000000
7d4348ae39200000
409e000c2f8a0000
4e8000207d234b78
4bffffe839290001
0000000000000000 0000000000000000
3c40000100000000 3c40000100000000
600000003842a000 3d20c0003842a000
39290010e9228000 7929002061290020
7d204eea7c0004ac 7d204eea7c0004ac
4082ffe871290001 792906003d00c000
38630008e8628000 7908002061080008
7c601eea7c0004ac 7d0046ea7c0004ac
4e8000205463063e 3940000071080020
3d40c00041820018
794a0020614a0040
7d4056ea7c0004ac
600000003d00c000
38e2800060000000
7908002061082000
3d00001cf9028008
7d29439261082000
79080fc37948f804
3940000141820080
6108200c3d00c000
7908002099470000
7c0004ac3940ff80
e94280087d4047aa
7d2057aa7c0004ac
7929c202e9428008
7c0004ac394a0004
e92280087d2057aa
3929000c39400003
7d404faa7c0004ac
39290010e9228008
7d404faa7c0004ac
39400007e9228008
7c0004ac39290008
4e8000207d404faa
990700003d40c000
614a20183929ffff
7c0004ac794a0020
4e8000207d2057ea
0000000000000000 0000000000000000
3c40000100000000 3c40000100000000
600000003842a000 600000003842a000
39290010e9228000 2ea4000039228000
7d204eea7c0004ac 2f89000089290000
4082ffe871290008 e922800860000000
7c0004ace9228000 41960024419e0030
2fa3000039400002
614a0001419e0008
7c0004ac39290004
4e8000207d404faa
4bffffe039400000
6063000241960008
7c0004ac39290020
4e8000207c604fea 4e8000207c604fea
0000000000000000 0000000000000000
3c40000100000000
7c0802a63842a000
fbe1fff8fbc1fff0
7c7f1b787fc32214
f821ffd1f8010010
409e000c7fbff040
4bfffe0c38210030
3bff0001887f0000
4bffffe44bffff8d
0100000000000000
3920000000000280
2f8a00007d4348ae
7d234b78409e000c
392900014e800020
000000004bffffe8
0000000000000000 0000000000000000
6f57206f6c6c6548 6f57206f6c6c6548
0000000a0d646c72 000000000a646c72

@ -1,8 +1,7 @@
#include <stddef.h> #include <stddef.h>


void potato_uart_init(void); void console_init(void);
void potato_uart_irq_en(void); void console_set_irq_en(bool rx_irq, bool tx_irq);
void potato_uart_irq_dis(void);
int getchar(void); int getchar(void);
int putchar(int c); int putchar(int c);
int puts(const char *str); int puts(const char *str);

@ -37,6 +37,9 @@
#define SYS_REG_INFO_HAS_BRAM (1ull << 2) #define SYS_REG_INFO_HAS_BRAM (1ull << 2)
#define SYS_REG_INFO_HAS_SPI_FLASH (1ull << 3) #define SYS_REG_INFO_HAS_SPI_FLASH (1ull << 3)
#define SYS_REG_INFO_HAS_LITEETH (1ull << 4) #define SYS_REG_INFO_HAS_LITEETH (1ull << 4)
#define SYS_REG_INFO_HAS_LARGE_SYSCON (1ull << 5)
#define SYS_REG_INFO_HAS_UART1 (1ull << 6)
#define SYS_REG_INFO_HAS_ARTB (1ull << 7)
#define SYS_REG_BRAMINFO 0x10 #define SYS_REG_BRAMINFO 0x10
#define SYS_REG_BRAMINFO_SIZE_MASK 0xfffffffffffffull #define SYS_REG_BRAMINFO_SIZE_MASK 0xfffffffffffffull
#define SYS_REG_DRAMINFO 0x18 #define SYS_REG_DRAMINFO 0x18
@ -50,7 +53,9 @@
#define SYS_REG_DRAMINITINFO 0x30 #define SYS_REG_DRAMINITINFO 0x30
#define SYS_REG_SPI_INFO 0x38 #define SYS_REG_SPI_INFO 0x38
#define SYS_REG_SPI_INFO_FLASH_OFF_MASK 0xffffffff #define SYS_REG_SPI_INFO_FLASH_OFF_MASK 0xffffffff

#define SYS_REG_UART0_INFO 0x40
#define SYS_REG_UART1_INFO 0x48
#define SYS_REG_UART_IS_16550 (1ull << 32)




/* /*
@ -65,6 +70,59 @@
#define POTATO_CONSOLE_STATUS_TX_FULL 0x08 #define POTATO_CONSOLE_STATUS_TX_FULL 0x08
#define POTATO_CONSOLE_CLOCK_DIV 0x18 #define POTATO_CONSOLE_CLOCK_DIV 0x18
#define POTATO_CONSOLE_IRQ_EN 0x20 #define POTATO_CONSOLE_IRQ_EN 0x20
#define POTATO_CONSOLE_IRQ_RX 0x01
#define POTATO_CONSOLE_IRQ_TX 0x02

/*
* Register definitionss for our standard (16550 style) UART
*/
#define UART_REG_RX 0x00
#define UART_REG_TX 0x00
#define UART_REG_DLL 0x00
#define UART_REG_IER 0x04
#define UART_REG_IER_RDI 0x01
#define UART_REG_IER_THRI 0x02
#define UART_REG_IER_RLSI 0x04
#define UART_REG_IER_MSI 0x08
#define UART_REG_DLM 0x04
#define UART_REG_IIR 0x08
#define UART_REG_FCR 0x08
#define UART_REG_FCR_EN_FIFO 0x01
#define UART_REG_FCR_CLR_RCVR 0x02
#define UART_REG_FCR_CLR_XMIT 0x04
#define UART_REG_FCR_TRIG1 0x00
#define UART_REG_FCR_TRIG4 0x40
#define UART_REG_FCR_TRIG8 0x80
#define UART_REG_FCR_TRIG14 0xc0
#define UART_REG_LCR 0x0c
#define UART_REG_LCR_5BIT 0x00
#define UART_REG_LCR_6BIT 0x01
#define UART_REG_LCR_7BIT 0x02
#define UART_REG_LCR_8BIT 0x03
#define UART_REG_LCR_STOP 0x04
#define UART_REG_LCR_PAR 0x08
#define UART_REG_LCR_EVEN_PAR 0x10
#define UART_REG_LCR_STIC_PAR 0x20
#define UART_REG_LCR_BREAK 0x40
#define UART_REG_LCR_DLAB 0x80
#define UART_REG_MCR 0x10
#define UART_REG_MCR_DTR 0x01
#define UART_REG_MCR_RTS 0x02
#define UART_REG_MCR_OUT1 0x04
#define UART_REG_MCR_OUT2 0x08
#define UART_REG_MCR_LOOP 0x10
#define UART_REG_LSR 0x14
#define UART_REG_LSR_DR 0x01
#define UART_REG_LSR_OE 0x02
#define UART_REG_LSR_PE 0x04
#define UART_REG_LSR_FE 0x08
#define UART_REG_LSR_BI 0x10
#define UART_REG_LSR_THRE 0x20
#define UART_REG_LSR_TEMT 0x40
#define UART_REG_LSR_FIFOE 0x80
#define UART_REG_MSR 0x18
#define UART_REG_SCR 0x1c



/* /*
* Register definitions for the SPI controller * Register definitions for the SPI controller

@ -5,22 +5,29 @@
#include "microwatt_soc.h" #include "microwatt_soc.h"
#include "io.h" #include "io.h"


#define UART_FREQ 115200 #define UART_BAUDS 115200


/* /*
* Core UART functions to implement for a port * Core UART functions to implement for a port
*/ */


static uint64_t potato_uart_base; bool uart_is_std;

static uint64_t uart_base;

static unsigned long uart_divisor(unsigned long uart_freq, unsigned long bauds)
{
return uart_freq / (bauds * 16);
}


static uint64_t potato_uart_reg_read(int offset) static uint64_t potato_uart_reg_read(int offset)
{ {
return readq(potato_uart_base + offset); return readq(uart_base + offset);
} }


static void potato_uart_reg_write(int offset, uint64_t val) static void potato_uart_reg_write(int offset, uint64_t val)
{ {
writeq(val, potato_uart_base + offset); writeq(val, uart_base + offset);
} }


static int potato_uart_rx_empty(void) static int potato_uart_rx_empty(void)
@ -65,45 +72,93 @@ static void potato_uart_write(char c)
potato_uart_reg_write(POTATO_CONSOLE_TX, val); potato_uart_reg_write(POTATO_CONSOLE_TX, val);
} }


static unsigned long potato_uart_divisor(unsigned long proc_freq, unsigned long uart_freq) static void potato_uart_init(uint64_t uart_freq)
{ {
return proc_freq / (uart_freq * 16) - 1; unsigned long div = uart_divisor(uart_freq, UART_BAUDS) - 1;
potato_uart_reg_write(POTATO_CONSOLE_CLOCK_DIV, div);
} }


void potato_uart_init(void) static void potato_uart_set_irq_en(bool rx_irq, bool tx_irq)
{ {
uint64_t proc_freq; uint64_t en = 0;


potato_uart_base = UART_BASE; if (rx_irq)
proc_freq = readq(SYSCON_BASE + SYS_REG_CLKINFO) & SYS_REG_CLKINFO_FREQ_MASK; en |= POTATO_CONSOLE_IRQ_RX;
if (tx_irq)
en |= POTATO_CONSOLE_IRQ_TX;
potato_uart_reg_write(POTATO_CONSOLE_IRQ_EN, en);
}


potato_uart_reg_write(POTATO_CONSOLE_CLOCK_DIV, potato_uart_divisor(proc_freq, UART_FREQ)); static bool std_uart_rx_empty(void)
{
return !(readb(uart_base + UART_REG_LSR) & UART_REG_LSR_DR);
} }


void potato_uart_irq_en(void) static uint8_t std_uart_read(void)
{ {
potato_uart_reg_write(POTATO_CONSOLE_IRQ_EN, 0xff); return readb(uart_base + UART_REG_RX);
} }


void potato_uart_irq_dis(void) static bool std_uart_tx_full(void)
{ {
potato_uart_reg_write(POTATO_CONSOLE_IRQ_EN, 0x00); return !(readb(uart_base + UART_REG_LSR) & UART_REG_LSR_THRE);
} }


int getchar(void) static void std_uart_write(uint8_t c)
{ {
while (potato_uart_rx_empty()) writeb(c, uart_base + UART_REG_TX);
/* Do nothing */ ; }

static void std_uart_set_irq_en(bool rx_irq, bool tx_irq)
{
uint8_t ier = 0;


return potato_uart_read(); if (tx_irq)
ier |= UART_REG_IER_THRI;
if (rx_irq)
ier |= UART_REG_IER_RDI;
writeb(ier, uart_base + UART_REG_IER);
} }


int putchar(int c) static void std_uart_init(uint64_t uart_freq)
{
unsigned long div = uart_divisor(uart_freq, UART_BAUDS);
writeb(UART_REG_LCR_DLAB, uart_base + UART_REG_LCR);
writeb(div & 0xff, uart_base + UART_REG_DLL);
writeb(div >> 8, uart_base + UART_REG_DLM);
writeb(UART_REG_LCR_8BIT, uart_base + UART_REG_LCR);
writeb(UART_REG_MCR_DTR |
UART_REG_MCR_RTS, uart_base + UART_REG_MCR);
writeb(UART_REG_FCR_EN_FIFO |
UART_REG_FCR_CLR_RCVR |
UART_REG_FCR_CLR_XMIT, uart_base + UART_REG_FCR);
}

int getchar(void)
{ {
while (potato_uart_tx_full()) if (uart_is_std) {
/* Do Nothing */; while (std_uart_rx_empty())
/* Do nothing */ ;
return std_uart_read();
} else {
while (potato_uart_rx_empty())
/* Do nothing */ ;
return potato_uart_read();
}
}


potato_uart_write(c); int putchar(int c)
{
if (uart_is_std) {
while(std_uart_tx_full())
/* Do Nothing */;
std_uart_write(c);
} else {
while (potato_uart_tx_full())
/* Do Nothing */;
potato_uart_write(c);
}
return c; return c;
} }


@ -131,3 +186,38 @@ size_t strlen(const char *s)
return len; return len;
} }
#endif #endif

void console_init(void)
{
uint64_t sys_info;
uint64_t proc_freq;
uint64_t uart_info = 0;
uint64_t uart_freq = 0;

proc_freq = readq(SYSCON_BASE + SYS_REG_CLKINFO) & SYS_REG_CLKINFO_FREQ_MASK;
sys_info = readq(SYSCON_BASE + SYS_REG_INFO);

if (sys_info & SYS_REG_INFO_HAS_LARGE_SYSCON) {
uart_info = readq(SYSCON_BASE + SYS_REG_UART0_INFO);
uart_freq = uart_info & 0xffffffff;
}
if (uart_freq == 0)
uart_freq = proc_freq;

uart_base = UART_BASE;
if (uart_info & SYS_REG_UART_IS_16550) {
uart_is_std = true;
std_uart_init(proc_freq);
} else {
uart_is_std = false;
potato_uart_init(proc_freq);
}
}

void console_set_irq_en(bool rx_irq, bool tx_irq)
{
if (uart_is_std)
std_uart_set_irq_en(rx_irq, tx_irq);
else
potato_uart_set_irq_en(rx_irq, tx_irq);
}

@ -241,7 +241,7 @@ uint64_t main(void)
bool try_flash = false; bool try_flash = false;


/* Init the UART */ /* Init the UART */
potato_uart_init(); console_init();


printf("\n\nWelcome to Microwatt !\n\n"); printf("\n\nWelcome to Microwatt !\n\n");



File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

Binary file not shown.

Binary file not shown.

File diff suppressed because it is too large Load Diff

@ -103,10 +103,13 @@ filesets:
liteeth: liteeth:
depend : [":microwatt:liteeth"] depend : [":microwatt:liteeth"]


uart16550:
depend : ["::uart16550"]

targets: targets:
nexys_a7: nexys_a7:
default_tool: vivado default_tool: vivado
filesets: [core, nexys_a7, soc, fpga, debug_xilinx, xilinx_specific] filesets: [core, nexys_a7, soc, fpga, debug_xilinx, uart16550, xilinx_specific]
parameters : parameters :
- memory_size - memory_size
- ram_init_file - ram_init_file
@ -114,13 +117,15 @@ targets:
- clk_frequency - clk_frequency
- disable_flatten_core - disable_flatten_core
- log_length=2048 - log_length=2048
- uart_is_16550
- has_uart1
tools: tools:
vivado: {part : xc7a100tcsg324-1} vivado: {part : xc7a100tcsg324-1}
toplevel : toplevel toplevel : toplevel


nexys_video-nodram: nexys_video-nodram:
default_tool: vivado default_tool: vivado
filesets: [core, nexys_video, soc, fpga, debug_xilinx, xilinx_specific] filesets: [core, nexys_video, soc, fpga, debug_xilinx, uart16550, xilinx_specific]
parameters : parameters :
- memory_size - memory_size
- ram_init_file - ram_init_file
@ -129,13 +134,15 @@ targets:
- disable_flatten_core - disable_flatten_core
- spi_flash_offset=10485760 - spi_flash_offset=10485760
- log_length=2048 - log_length=2048
- uart_is_16550
- has_uart1
tools: tools:
vivado: {part : xc7a200tsbg484-1} vivado: {part : xc7a200tsbg484-1}
toplevel : toplevel toplevel : toplevel


nexys_video: nexys_video:
default_tool: vivado default_tool: vivado
filesets: [core, nexys_video, soc, fpga, debug_xilinx, litedram, xilinx_specific] filesets: [core, nexys_video, soc, fpga, debug_xilinx, litedram, uart16550, xilinx_specific]
parameters: parameters:
- memory_size - memory_size
- ram_init_file - ram_init_file
@ -151,7 +158,7 @@ targets:


arty_a7-35-nodram: arty_a7-35-nodram:
default_tool: vivado default_tool: vivado
filesets: [core, arty_a7, soc, fpga, debug_xilinx, xilinx_specific] filesets: [core, arty_a7, soc, fpga, debug_xilinx, uart16550, xilinx_specific]
parameters : parameters :
- memory_size - memory_size
- ram_init_file - ram_init_file
@ -160,13 +167,15 @@ targets:
- disable_flatten_core - disable_flatten_core
- spi_flash_offset=3145728 - spi_flash_offset=3145728
- log_length=512 - log_length=512
- uart_is_16550
- has_uart1
tools: tools:
vivado: {part : xc7a35ticsg324-1L} vivado: {part : xc7a35ticsg324-1L}
toplevel : toplevel toplevel : toplevel


arty_a7-35: arty_a7-35:
default_tool: vivado default_tool: vivado
filesets: [core, arty_a7, soc, fpga, debug_xilinx, litedram, liteeth, xilinx_specific] filesets: [core, arty_a7, soc, fpga, debug_xilinx, litedram, liteeth, uart16550, xilinx_specific]
parameters : parameters :
- memory_size - memory_size
- ram_init_file - ram_init_file
@ -176,6 +185,8 @@ targets:
- no_bram - no_bram
- spi_flash_offset=3145728 - spi_flash_offset=3145728
- log_length=512 - log_length=512
- uart_is_16550
- has_uart1
generate: [litedram_arty, liteeth_arty] generate: [litedram_arty, liteeth_arty]
tools: tools:
vivado: {part : xc7a35ticsg324-1L} vivado: {part : xc7a35ticsg324-1L}
@ -183,7 +194,7 @@ targets:


arty_a7-100-nodram: arty_a7-100-nodram:
default_tool: vivado default_tool: vivado
filesets: [core, arty_a7, soc, fpga, debug_xilinx, xilinx_specific] filesets: [core, arty_a7, soc, fpga, debug_xilinx, uart16550, xilinx_specific]
parameters : parameters :
- memory_size - memory_size
- ram_init_file - ram_init_file
@ -192,13 +203,15 @@ targets:
- disable_flatten_core - disable_flatten_core
- spi_flash_offset=4194304 - spi_flash_offset=4194304
- log_length=2048 - log_length=2048
- uart_is_16550
- has_uart1
tools: tools:
vivado: {part : xc7a100ticsg324-1L} vivado: {part : xc7a100ticsg324-1L}
toplevel : toplevel toplevel : toplevel


arty_a7-100: arty_a7-100:
default_tool: vivado default_tool: vivado
filesets: [core, arty_a7, soc, fpga, debug_xilinx, litedram, liteeth, xilinx_specific] filesets: [core, arty_a7, soc, fpga, debug_xilinx, litedram, liteeth, uart16550, xilinx_specific]
parameters: parameters:
- memory_size - memory_size
- ram_init_file - ram_init_file
@ -208,6 +221,8 @@ targets:
- no_bram - no_bram
- spi_flash_offset=4194304 - spi_flash_offset=4194304
- log_length=2048 - log_length=2048
- uart_is_16550
- has_uart1
generate: [litedram_arty, liteeth_arty] generate: [litedram_arty, liteeth_arty]
tools: tools:
vivado: {part : xc7a100ticsg324-1L} vivado: {part : xc7a100ticsg324-1L}
@ -215,7 +230,7 @@ targets:


cmod_a7-35: cmod_a7-35:
default_tool: vivado default_tool: vivado
filesets: [core, cmod_a7-35, soc, fpga, debug_xilinx, xilinx_specific] filesets: [core, cmod_a7-35, soc, fpga, debug_xilinx, uart16550, xilinx_specific]
parameters : parameters :
- memory_size - memory_size
- ram_init_file - ram_init_file
@ -224,6 +239,8 @@ targets:
- clk_frequency - clk_frequency
- disable_flatten_core - disable_flatten_core
- log_length=512 - log_length=512
- uart_is_16550
- has_uart1
tools: tools:
vivado: {part : xc7a35tcpg236-1} vivado: {part : xc7a35tcpg236-1}
toplevel : toplevel toplevel : toplevel
@ -294,6 +311,18 @@ parameters:
paramtype : generic paramtype : generic
default : false default : false


uart_is_16550:
datatype : bool
description : Use 16550-compatible UART from OpenCores
paramtype : generic
default : true

has_uart1:
datatype : bool
description : Enable second UART (always 16550-compatible)
paramtype : generic
default : false

no_bram: no_bram:
datatype : bool datatype : bool
description : No internal block RAM (only DRAM and init code carrying payload) description : No internal block RAM (only DRAM and init code carrying payload)

@ -25,7 +25,7 @@ void init_bss()
int main(void) int main(void)
{ {
init_bss(); init_bss();
potato_uart_init(); console_init();


puts(HELLO_WORLD); puts(HELLO_WORLD);



@ -39,7 +39,7 @@ sim_provides = {
"dmi_dtm" : "dmi_dtm_xilinx.vhdl", "dmi_dtm" : "dmi_dtm_xilinx.vhdl",
"clock_generator" : "fpga/clk_gen_bypass.vhd", "clock_generator" : "fpga/clk_gen_bypass.vhd",
"main_bram" : "sim_bram.vhdl", "main_bram" : "sim_bram.vhdl",
"pp_soc_uart" : "sim_uart.vhdl" "pp_soc_uart" : "sim_pp_uart.vhdl"
} }


if synth: if synth:

@ -0,0 +1,421 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

library work;
use work.sim_console.all;

entity uart_top is
port(
wb_clk_i : in std_ulogic;
wb_rst_i : in std_ulogic;
wb_adr_i : in std_ulogic_vector(2 downto 0);
wb_dat_i : in std_ulogic_vector(7 downto 0);
wb_dat_o : out std_ulogic_vector(7 downto 0);
wb_we_i : in std_ulogic;
wb_stb_i : in std_ulogic;
wb_cyc_i : in std_ulogic;
wb_ack_o : out std_ulogic;
int_o : out std_ulogic;
stx_pad_o : out std_ulogic;
srx_pad_i : in std_ulogic;
rts_pad_o : out std_ulogic;
cts_pad_i : in std_ulogic;
dtr_pad_o : out std_ulogic;
dsr_pad_i : in std_ulogic;
ri_pad_i : in std_ulogic;
dcd_pad_i : in std_ulogic
);
end entity uart_top;

architecture behaviour of uart_top is

-- Call POLL every N clocks to generate interrupts
constant POLL_DELAY : natural := 100;

-- Register definitions
subtype reg_adr_t is std_ulogic_vector(2 downto 0);

constant REG_IDX_RXTX : reg_adr_t := "000";
constant REG_IDX_IER : reg_adr_t := "001";
constant REG_IDX_IIR_FCR : reg_adr_t := "010";
constant REG_IDX_LCR : reg_adr_t := "011";
constant REG_IDX_MCR : reg_adr_t := "100";
constant REG_IDX_LSR : reg_adr_t := "101";
constant REG_IDX_MSR : reg_adr_t := "110";
constant REG_IDX_SCR : reg_adr_t := "111";

-- IER bits
constant REG_IER_RDI_BIT : natural := 0;
constant REG_IER_THRI_BIT : natural := 1;
constant REG_IER_RLSI_BIT : natural := 2;
constant REG_IER_MSI_BIT : natural := 3;

-- IIR bit
constant REG_IIR_NO_INT : natural := 0;
-- IIR values for bit 3 downto 0
constant REG_IIR_RDI : std_ulogic_vector(3 downto 1) := "010";
constant REG_IIR_THRI : std_ulogic_vector(3 downto 1) := "001";
constant REG_IIR_RLSI : std_ulogic_vector(3 downto 1) := "011";
constant REG_IIR_MSI : std_ulogic_vector(3 downto 1) := "000";

-- FCR bits
constant REG_FCR_EN_FIFO_BIT : natural := 0; -- Always 1
constant REG_FCR_CLR_RCVR_BIT : natural := 1;
constant REG_FCR_CLR_XMIT_BIT : natural := 2;
constant REG_FCR_DMA_SEL_BIT : natural := 3; -- Not implemented
-- FCR values for FIFO threshold in bits 7 downto 6
constant REG_FCR_FIFO_TRIG1 : std_ulogic_vector(7 downto 6) := "00";
constant REG_FCR_FIFO_TRIG4 : std_ulogic_vector(7 downto 6) := "01";
constant REG_FCR_FIFO_TRIG8 : std_ulogic_vector(7 downto 6) := "10";
constant REG_FCR_FIFO_TRIG14 : std_ulogic_vector(7 downto 6) := "11";

-- LCR bits
constant REG_LCR_STOP_BIT : natural := 2;
constant REG_LCR_PARITY_BIT : natural := 3;
constant REG_LCR_EPAR_BIT : natural := 4;
constant REG_LCR_SPAR_BIT : natural := 5;
constant REG_LCR_SBC_BIT : natural := 6;
constant REG_LCR_DLAB_BIT : natural := 7;
-- LCR values for data length (bits 1 downto 0)
constant REG_LCR_WLEN5 : std_ulogic_vector(1 downto 0) := "00";
constant REG_LCR_WLEN6 : std_ulogic_vector(1 downto 0) := "01";
constant REG_LCR_WLEN7 : std_ulogic_vector(1 downto 0) := "10";
constant REG_LCR_WLEN8 : std_ulogic_vector(1 downto 0) := "11";

-- MCR bits
constant REG_MCR_DTR_BIT : natural := 0;
constant REG_MCR_RTS_BIT : natural := 1;
constant REG_MCR_OUT1_BIT : natural := 2;
constant REG_MCR_OUT2_BIT : natural := 3;
constant REG_MCR_LOOP_BIT : natural := 4;

-- LSR bits
constant REG_LSR_DR_BIT : natural := 0;
constant REG_LSR_OE_BIT : natural := 1;
constant REG_LSR_PE_BIT : natural := 2;
constant REG_LSR_FE_BIT : natural := 3;
constant REG_LSR_BI_BIT : natural := 4;
constant REG_LSR_THRE_BIT : natural := 5;
constant REG_LSR_TEMT_BIT : natural := 6;
constant REG_LSR_FIFOE_BIT : natural := 7;

-- MSR bits
constant REG_MSR_DCTS_BIT : natural := 0;
constant REG_MSR_DDSR_BIT : natural := 1;
constant REG_MSR_TERI_BIT : natural := 2;
constant REG_MSR_DDCD_BIT : natural := 3;
constant REG_MSR_CTS_BIT : natural := 4;
constant REG_MSR_DSR_BIT : natural := 5;
constant REG_MSR_RI_BIT : natural := 6;
constant REG_MSR_DCD_BIT : natural := 7;

-- Wishbone signals decode:
signal reg_idx : reg_adr_t;
signal wb_phase : std_ulogic;
signal reg_write : std_ulogic;
signal reg_read : std_ulogic;

-- Register storage
signal reg_ier : std_ulogic_vector(3 downto 0);
signal reg_iir : std_ulogic_vector(3 downto 0);
signal reg_fcr : std_ulogic_vector(7 downto 6);
signal reg_lcr : std_ulogic_vector(7 downto 0);
signal reg_mcr : std_ulogic_vector(4 downto 0);
signal reg_lsr : std_ulogic_vector(7 downto 0);
signal reg_msr : std_ulogic_vector(7 downto 0);
signal reg_scr : std_ulogic_vector(7 downto 0);

signal reg_div : std_ulogic_vector(15 downto 0);

-- Control signals
signal rx_fifo_clr : std_ulogic;
signal tx_fifo_clr : std_ulogic;

-- Pending interrupts
signal int_rdi_pending : std_ulogic;
signal int_thri_pending : std_ulogic;
signal int_rlsi_pending : std_ulogic;
signal int_msi_pending : std_ulogic;

-- Actual data output
signal data_out : std_ulogic_vector(7 downto 0) := x"00";

-- Incoming data pending signal
signal data_in_pending : std_ulogic := '0';

-- Useful aliases
alias dlab : std_ulogic is reg_lcr(REG_LCR_DLAB_BIT);

alias clk : std_ulogic is wb_clk_i;
alias rst : std_ulogic is wb_rst_i;
alias cyc : std_ulogic is wb_cyc_i;
alias stb : std_ulogic is wb_stb_i;
alias we : std_ulogic is wb_we_i;
begin

-- Register index shortcut
reg_idx <= wb_adr_i(2 downto 0);

-- 2 phases WB process.
--
-- Among others, this gives us a "free" cycle for the
-- side effects of some accesses percolate in the form
-- of status bit changes in other registers.
wb_cycle: process(clk)
variable phase : std_ulogic := '0';
begin
if rising_edge(clk) then
if wb_phase = '0' then
if cyc = '1' and stb = '1' then
wb_ack_o <= '1';
wb_phase <= '1';
end if;
else
wb_ack_o <= '0';
wb_phase <= '0';
end if;
end if;
end process;

-- Reg read/write signals
reg_write <= cyc and stb and we and not wb_phase;
reg_read <= cyc and stb and not we and not wb_phase;

-- Register read is synchronous to avoid collisions with
-- read-clear side effects
do_reg_read: process(clk)
begin
if rising_edge(clk) then
wb_dat_o <= x"00";
if reg_read = '1' then
case reg_idx is
when REG_IDX_RXTX =>
if dlab = '1' then
wb_dat_o <= reg_div(7 downto 0);
else
wb_dat_o <= data_out;
end if;
when REG_IDX_IER =>
if dlab = '1' then
wb_dat_o <= reg_div(15 downto 8);
else
wb_dat_o <= "0000" & reg_ier;
end if;
when REG_IDX_IIR_FCR =>
-- Top bits always set as FIFO is always enabled
wb_dat_o <= "1100" & reg_iir;
when REG_IDX_LCR =>
wb_dat_o <= reg_lcr;
when REG_IDX_LSR =>
wb_dat_o <= reg_lsr;
when REG_IDX_MSR =>
wb_dat_o <= reg_msr;
when REG_IDX_SCR =>
wb_dat_o <= reg_scr;
when others =>
end case;
end if;
end if;
end process;

-- Receive/send synchronous process
rxtx: process(clk)
variable dp : std_ulogic;
variable poll_cnt : natural;
variable sim_tmp : std_ulogic_vector(63 downto 0);
begin
if rising_edge(clk) then
if rst = '0' then
dp := data_in_pending;
if dlab = '0' and reg_idx = REG_IDX_RXTX then
if reg_write = '1' then
-- FIFO write
-- XXX Simulate the FIFO and delays for more
-- accurate behaviour & interrupts
sim_console_write(x"00000000000000" & wb_dat_i);
end if;
if reg_read = '1' then
dp := '0';
data_out <= x"00";
end if;
end if;

-- Poll for incoming data
if poll_cnt = 0 or (reg_read = '1' and reg_idx = REG_IDX_LSR) then
sim_console_poll(sim_tmp);
poll_cnt := POLL_DELAY;
if dp = '0' and sim_tmp(0) = '1' then
dp := '1';
sim_console_read(sim_tmp);
data_out <= sim_tmp(7 downto 0);
end if;
poll_cnt := poll_cnt - 1;
end if;
data_in_pending <= dp;
end if;
end if;
end process;

-- Interrupt pending bits
int_rdi_pending <= data_in_pending;
int_thri_pending <= '1';
int_rlsi_pending <= reg_lsr(REG_LSR_OE_BIT) or
reg_lsr(REG_LSR_PE_BIT) or
reg_lsr(REG_LSR_FE_BIT) or
reg_lsr(REG_LSR_BI_BIT);
int_msi_pending <= reg_msr(REG_MSR_DCTS_BIT) or
reg_msr(REG_MSR_DDSR_BIT) or
reg_msr(REG_MSR_TERI_BIT) or
reg_msr(REG_MSR_DDCD_BIT);

-- Derive interrupt output from IIR
int_o <= not reg_iir(REG_IIR_NO_INT);

-- Divisor register
div_reg_w: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
reg_div <= (others => '0');
elsif reg_write = '1' and dlab = '1' then
if reg_idx = REG_IDX_RXTX then
reg_div(7 downto 0) <= wb_dat_i;
elsif reg_idx = REG_IDX_IER then
reg_div(15 downto 8) <= wb_dat_i;
end if;
end if;
end if;
end process;

-- IER register
ier_reg_w: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
reg_ier <= "0000";
else
if reg_write = '1' and dlab = '0' and reg_idx = REG_IDX_IER then
reg_ier <= wb_dat_i(3 downto 0);
end if;
end if;
end if;
end process;

-- IIR (read only) generation
iir_reg_w: process(clk)
begin
if rising_edge(clk) then
reg_iir <= "0001";
if int_rlsi_pending = '1' and reg_ier(REG_IER_RLSI_BIT) = '1' then
reg_iir <= REG_IIR_RLSI & "0";
elsif int_rdi_pending = '1' and reg_ier(REG_IER_RDI_BIT) = '1' then
reg_iir <= REG_IIR_RDI & "0";
elsif int_thri_pending = '1' and reg_ier(REG_IER_THRI_BIT) = '1' then
reg_iir <= REG_IIR_THRI & "0";
elsif int_msi_pending = '1' and reg_ier(REG_IER_MSI_BIT) = '1' then
reg_iir <= REG_IIR_MSI & "0";
end if;

-- It *seems* like reading IIR should clear THRI for
-- some amount of time until it gets set again a few
-- clocks later if the transmitter is still empty. We
-- don't do that at this point.
end if;
end process;

-- FCR (write only) register
fcr_reg_w: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
reg_fcr <= "11";
rx_fifo_clr <= '1';
tx_fifo_clr <= '1';
elsif reg_write = '1' and reg_idx = REG_IDX_IIR_FCR then
reg_fcr <= wb_dat_i(7 downto 6);
rx_fifo_clr <= wb_dat_i(REG_FCR_CLR_RCVR_BIT);
tx_fifo_clr <= wb_dat_i(REG_FCR_CLR_XMIT_BIT);
else
rx_fifo_clr <= '0';
tx_fifo_clr <= '0';
end if;
end if;
end process;

-- LCR register
lcr_reg_w: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
reg_lcr <= "00000011";
elsif reg_write = '1' and reg_idx = REG_IDX_LCR then
reg_lcr <= wb_dat_i;
end if;
end if;
end process;

-- MCR register
mcr_reg_w: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
reg_mcr <= "00000";
elsif reg_write = '1' and reg_idx = REG_IDX_MCR then
reg_mcr <= wb_dat_i(4 downto 0);
end if;
end if;
end process;

-- LSR register
lsr_reg_w: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
reg_lsr <= "00000000";
else
reg_lsr(REG_LSR_DR_BIT) <= data_in_pending;

-- Clear error bits on read. Those bits are
-- always 0 in sim for now.
-- if reg_read = '1' and reg_idx = REG_IDX_LSR then
-- reg_lsr(REG_LSR_OE_BIT) <= '0';
-- reg_lsr(REG_LSR_PE_BIT) <= '0';
-- reg_lsr(REG_LSR_FE_BIT) <= '0';
-- reg_lsr(REG_LSR_BI_BIT) <= '0';
-- reg_lsr(REG_LSR_FIFOE_BIT) <= '0';
-- end if;

-- Tx FIFO empty indicators. Always empty in sim
reg_lsr(REG_LSR_THRE_BIT) <= '1';
reg_lsr(REG_LSR_TEMT_BIT) <= '1';
end if;
end if;
end process;

-- MSR register
msr_reg_w: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
reg_msr <= "00000000";
elsif reg_read = '1' and reg_idx = REG_IDX_MSR then
reg_msr <= "00000000";
-- XXX TODO bit setting machine...
end if;
end if;
end process;

-- SCR register
scr_reg_w: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
reg_scr <= "00000000";
elsif reg_write = '1' and reg_idx = REG_IDX_SCR then
reg_scr <= wb_dat_i;
end if;
end if;
end process;

end architecture behaviour;

@ -71,8 +71,11 @@ void sim_console_poll(unsigned char *__rt)
ret = poll(fdset, 1, 0); ret = poll(fdset, 1, 0);
//fprintf(stderr, "poll returns %d\n", ret); //fprintf(stderr, "poll returns %d\n", ret);


if (ret == 1) if (ret == 1) {
val = 1; if (fdset[0].revents & POLLIN)
val = 1;
// fprintf(stderr, "poll revents: 0x%x\n", fdset[0].revents);
}


to_std_logic_vector(val, __rt, 64); to_std_logic_vector(val, __rt, 64);
} }

@ -20,6 +20,7 @@ use work.wishbone_types.all;
-- IO Bus: -- IO Bus:
-- 0xc0000000: SYSCON -- 0xc0000000: SYSCON
-- 0xc0002000: UART0 -- 0xc0002000: UART0
-- 0xc0003000: UART1 (if any)
-- 0xc0004000: XICS ICP -- 0xc0004000: XICS ICP
-- 0xc0005000: XICS ICS -- 0xc0005000: XICS ICS
-- 0xc0006000: SPI Flash controller -- 0xc0006000: SPI Flash controller
@ -61,7 +62,9 @@ entity soc is
SPI_FLASH_DEF_CKDV : natural := 2; SPI_FLASH_DEF_CKDV : natural := 2;
SPI_FLASH_DEF_QUAD : boolean := false; SPI_FLASH_DEF_QUAD : boolean := false;
LOG_LENGTH : natural := 512; LOG_LENGTH : natural := 512;
HAS_LITEETH : boolean := false HAS_LITEETH : boolean := false;
UART0_IS_16550 : boolean := true;
HAS_UART1 : boolean := false
); );
port( port(
rst : in std_ulogic; rst : in std_ulogic;
@ -85,6 +88,10 @@ entity soc is
uart0_txd : out std_ulogic; uart0_txd : out std_ulogic;
uart0_rxd : in std_ulogic := '0'; uart0_rxd : in std_ulogic := '0';


-- UART1 signals:
uart1_txd : out std_ulogic;
uart1_rxd : in std_ulogic := '0';

-- SPI Flash signals -- SPI Flash signals
spi_flash_sck : out std_ulogic; spi_flash_sck : out std_ulogic;
spi_flash_cs_n : out std_ulogic; spi_flash_cs_n : out std_ulogic;
@ -137,6 +144,12 @@ architecture behaviour of soc is
signal uart0_dat8 : std_ulogic_vector(7 downto 0); signal uart0_dat8 : std_ulogic_vector(7 downto 0);
signal uart0_irq : std_ulogic; signal uart0_irq : std_ulogic;


-- UART1 signals:
signal wb_uart1_in : wb_io_master_out;
signal wb_uart1_out : wb_io_slave_out;
signal uart1_dat8 : std_ulogic_vector(7 downto 0);
signal uart1_irq : std_ulogic;

-- SPI Flash controller signals: -- SPI Flash controller signals:
signal wb_spiflash_in : wb_io_master_out; signal wb_spiflash_in : wb_io_master_out;
signal wb_spiflash_out : wb_io_slave_out; signal wb_spiflash_out : wb_io_slave_out;
@ -188,12 +201,37 @@ architecture behaviour of soc is
SLAVE_IO_UART, SLAVE_IO_UART,
SLAVE_IO_ICP, SLAVE_IO_ICP,
SLAVE_IO_ICS, SLAVE_IO_ICS,
SLAVE_IO_UART1,
SLAVE_IO_SPI_FLASH_REG, SLAVE_IO_SPI_FLASH_REG,
SLAVE_IO_SPI_FLASH_MAP, SLAVE_IO_SPI_FLASH_MAP,
SLAVE_IO_EXTERNAL, SLAVE_IO_EXTERNAL,
SLAVE_IO_NONE); SLAVE_IO_NONE);
signal slave_io_dbg : slave_io_type; signal slave_io_dbg : slave_io_type;


-- This is the component exported by the 16550 compatible
-- UART from FuseSoC.
--
component uart_top port (
wb_clk_i : in std_ulogic;
wb_rst_i : in std_ulogic;
wb_adr_i : in std_ulogic_vector(2 downto 0);
wb_dat_i : in std_ulogic_vector(7 downto 0);
wb_dat_o : out std_ulogic_vector(7 downto 0);
wb_we_i : in std_ulogic;
wb_stb_i : in std_ulogic;
wb_cyc_i : in std_ulogic;
wb_ack_o : out std_ulogic;
int_o : out std_ulogic;
stx_pad_o : out std_ulogic;
srx_pad_i : in std_ulogic;
rts_pad_o : out std_ulogic;
cts_pad_i : in std_ulogic;
dtr_pad_o : out std_ulogic;
dsr_pad_i : in std_ulogic;
ri_pad_i : in std_ulogic;
dcd_pad_i : in std_ulogic
);
end component;
begin begin


resets: process(system_clk) resets: process(system_clk)
@ -458,7 +496,7 @@ begin
-- IO wishbone slave intercon. -- IO wishbone slave intercon.
-- --
slave_io_intercon: process(wb_sio_out, wb_syscon_out, wb_uart0_out, slave_io_intercon: process(wb_sio_out, wb_syscon_out, wb_uart0_out, wb_uart1_out,
wb_ext_io_out, wb_xics_icp_out, wb_xics_ics_out, wb_ext_io_out, wb_xics_icp_out, wb_xics_ics_out,
wb_spiflash_out) wb_spiflash_out)
variable slave_io : slave_io_type; variable slave_io : slave_io_type;
@ -478,6 +516,8 @@ begin
slave_io := SLAVE_IO_SYSCON; slave_io := SLAVE_IO_SYSCON;
elsif std_match(match, x"C0002") then elsif std_match(match, x"C0002") then
slave_io := SLAVE_IO_UART; slave_io := SLAVE_IO_UART;
elsif std_match(match, x"C0003") then
slave_io := SLAVE_IO_UART1;
elsif std_match(match, x"C8---") then elsif std_match(match, x"C8---") then
slave_io := SLAVE_IO_EXTERNAL; slave_io := SLAVE_IO_EXTERNAL;
elsif std_match(match, x"C0004") then elsif std_match(match, x"C0004") then
@ -490,6 +530,8 @@ begin
slave_io_dbg <= slave_io; slave_io_dbg <= slave_io;
wb_uart0_in <= wb_sio_out; wb_uart0_in <= wb_sio_out;
wb_uart0_in.cyc <= '0'; wb_uart0_in.cyc <= '0';
wb_uart1_in <= wb_sio_out;
wb_uart1_in.cyc <= '0';
wb_spiflash_in <= wb_sio_out; wb_spiflash_in <= wb_sio_out;
wb_spiflash_in.cyc <= '0'; wb_spiflash_in.cyc <= '0';
wb_spiflash_is_reg <= '0'; wb_spiflash_is_reg <= '0';
@ -559,6 +601,9 @@ begin
when SLAVE_IO_ICS => when SLAVE_IO_ICS =>
wb_xics_ics_in.cyc <= wb_sio_out.cyc; wb_xics_ics_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_xics_ics_out; wb_sio_in <= wb_xics_ics_out;
when SLAVE_IO_UART1 =>
wb_uart1_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_uart1_out;
when SLAVE_IO_SPI_FLASH_MAP => when SLAVE_IO_SPI_FLASH_MAP =>
-- Clear top bits so they don't make their way to the -- Clear top bits so they don't make their way to the
-- fash chip. -- fash chip.
@ -586,7 +631,9 @@ begin
CLK_FREQ => CLK_FREQ, CLK_FREQ => CLK_FREQ,
HAS_SPI_FLASH => HAS_SPI_FLASH, HAS_SPI_FLASH => HAS_SPI_FLASH,
SPI_FLASH_OFFSET => SPI_FLASH_OFFSET, SPI_FLASH_OFFSET => SPI_FLASH_OFFSET,
HAS_LITEETH => HAS_LITEETH HAS_LITEETH => HAS_LITEETH,
UART0_IS_16550 => UART0_IS_16550,
HAS_UART1 => HAS_UART1
) )
port map( port map(
clk => system_clk, clk => system_clk,
@ -598,30 +645,115 @@ begin
soc_reset => open -- XXX TODO soc_reset => open -- XXX TODO
); );


-- Simulated memory and UART --
-- UART0
--
-- Either potato (legacy) or 16550
--
uart0_pp: if not UART0_IS_16550 generate
uart0: entity work.pp_soc_uart
generic map(
FIFO_DEPTH => 32
)
port map(
clk => system_clk,
reset => rst_uart,
txd => uart0_txd,
rxd => uart0_rxd,
irq => uart0_irq,
wb_adr_in => wb_uart0_in.adr(11 downto 0),
wb_dat_in => wb_uart0_in.dat(7 downto 0),
wb_dat_out => uart0_dat8,
wb_cyc_in => wb_uart0_in.cyc,
wb_stb_in => wb_uart0_in.stb,
wb_we_in => wb_uart0_in.we,
wb_ack_out => wb_uart0_out.ack
);
end generate;

uart0_16550 : if UART0_IS_16550 generate
signal irq_l : std_ulogic;
begin
uart0: uart_top
port map (
wb_clk_i => system_clk,
wb_rst_i => rst_uart,
wb_adr_i => wb_uart0_in.adr(4 downto 2),
wb_dat_i => wb_uart0_in.dat(7 downto 0),
wb_dat_o => uart0_dat8,
wb_we_i => wb_uart0_in.we,
wb_stb_i => wb_uart0_in.stb,
wb_cyc_i => wb_uart0_in.cyc,
wb_ack_o => wb_uart0_out.ack,
int_o => irq_l,
stx_pad_o => uart0_txd,
srx_pad_i => uart0_rxd,
rts_pad_o => open,
cts_pad_i => '1',
dtr_pad_o => open,
dsr_pad_i => '1',
ri_pad_i => '0',
dcd_pad_i => '1'
);

-- Add a register on the irq out, helps timing
uart0_irq_latch: process(system_clk)
begin
if rising_edge(system_clk) then
uart0_irq <= irq_l;
end if;
end process;
end generate;


-- UART0 wishbone slave
uart0: entity work.pp_soc_uart
generic map(
FIFO_DEPTH => 32
)
port map(
clk => system_clk,
reset => rst_uart,
txd => uart0_txd,
rxd => uart0_rxd,
irq => uart0_irq,
wb_adr_in => wb_uart0_in.adr(11 downto 0),
wb_dat_in => wb_uart0_in.dat(7 downto 0),
wb_dat_out => uart0_dat8,
wb_cyc_in => wb_uart0_in.cyc,
wb_stb_in => wb_uart0_in.stb,
wb_we_in => wb_uart0_in.we,
wb_ack_out => wb_uart0_out.ack
);
wb_uart0_out.dat <= x"000000" & uart0_dat8; wb_uart0_out.dat <= x"000000" & uart0_dat8;
wb_uart0_out.stall <= not wb_uart0_out.ack; wb_uart0_out.stall <= not wb_uart0_out.ack;


--
-- UART1
--
-- Always 16550 if it exists
--
uart1: if HAS_UART1 generate
signal irq_l : std_ulogic;
begin
uart1: uart_top
port map (
wb_clk_i => system_clk,
wb_rst_i => rst_uart,
wb_adr_i => wb_uart1_in.adr(4 downto 2),
wb_dat_i => wb_uart1_in.dat(7 downto 0),
wb_dat_o => uart1_dat8,
wb_we_i => wb_uart1_in.we,
wb_stb_i => wb_uart1_in.stb,
wb_cyc_i => wb_uart1_in.cyc,
wb_ack_o => wb_uart1_out.ack,
int_o => irq_l,
stx_pad_o => uart1_txd,
srx_pad_i => uart1_rxd,
rts_pad_o => open,
cts_pad_i => '1',
dtr_pad_o => open,
dsr_pad_i => '1',
ri_pad_i => '0',
dcd_pad_i => '1'
);
-- Add a register on the irq out, helps timing
uart0_irq_latch: process(system_clk)
begin
if rising_edge(system_clk) then
uart1_irq <= irq_l;
end if;
end process;
wb_uart1_out.dat <= x"000000" & uart1_dat8;
wb_uart1_out.stall <= not wb_uart1_out.ack;
end generate;

no_uart1 : if not HAS_UART1 generate
wb_uart1_out.dat <= x"00000000";
wb_uart1_out.ack <= wb_uart1_in.cyc and wb_uart1_in.stb;
wb_uart1_out.stall <= '0';
end generate;

spiflash_gen: if HAS_SPI_FLASH generate spiflash_gen: if HAS_SPI_FLASH generate
spiflash: entity work.spi_flash_ctrl spiflash: entity work.spi_flash_ctrl
generic map ( generic map (
@ -680,6 +812,7 @@ begin
int_level_in <= (others => '0'); int_level_in <= (others => '0');
int_level_in(0) <= uart0_irq; int_level_in(0) <= uart0_irq;
int_level_in(1) <= ext_irq_eth; int_level_in(1) <= ext_irq_eth;
int_level_in(2) <= uart1_irq;
end process; end process;


-- BRAM Memory slave -- BRAM Memory slave

@ -17,7 +17,9 @@ entity syscon is
DRAM_INIT_SIZE : integer; DRAM_INIT_SIZE : integer;
HAS_SPI_FLASH : boolean; HAS_SPI_FLASH : boolean;
SPI_FLASH_OFFSET : integer; SPI_FLASH_OFFSET : integer;
HAS_LITEETH : boolean HAS_LITEETH : boolean;
UART0_IS_16550 : boolean;
HAS_UART1 : boolean
); );
port ( port (
clk : in std_ulogic; clk : in std_ulogic;
@ -37,27 +39,32 @@ end entity syscon;


architecture behaviour of syscon is architecture behaviour of syscon is
-- Register address bits -- Register address bits
constant SYS_REG_BITS : positive := 3; constant SYS_REG_BITS : positive := 6;


-- Register addresses (matches wishbone addr downto 3, ie, 8 bytes per reg) -- Register addresses (matches wishbone addr downto 3, ie, 8 bytes per reg)
constant SYS_REG_SIG : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000"; constant SYS_REG_SIG : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000000";
constant SYS_REG_INFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "001"; constant SYS_REG_INFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000001";
constant SYS_REG_BRAMINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "010"; constant SYS_REG_BRAMINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000010";
constant SYS_REG_DRAMINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "011"; constant SYS_REG_DRAMINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000011";
constant SYS_REG_CLKINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "100"; constant SYS_REG_CLKINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000100";
constant SYS_REG_CTRL : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "101"; constant SYS_REG_CTRL : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000101";
constant SYS_REG_DRAMINITINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "110"; constant SYS_REG_DRAMINITINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000110";
constant SYS_REG_SPIFLASHINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "111"; constant SYS_REG_SPIFLASHINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000111";
constant SYS_REG_UART0_INFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "001000";
constant SYS_REG_UART1_INFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "001001";


-- Muxed reg read signal -- Muxed reg read signal
signal reg_out : std_ulogic_vector(63 downto 0); signal reg_out : std_ulogic_vector(63 downto 0);


-- INFO register bits -- INFO register bits
constant SYS_REG_INFO_HAS_UART : integer := 0; constant SYS_REG_INFO_HAS_UART : integer := 0; -- Has a UART (always set)
constant SYS_REG_INFO_HAS_DRAM : integer := 1; constant SYS_REG_INFO_HAS_DRAM : integer := 1; -- Has DRAM
constant SYS_REG_INFO_HAS_BRAM : integer := 2; constant SYS_REG_INFO_HAS_BRAM : integer := 2; -- Has "main" BRAM
constant SYS_REG_INFO_HAS_SPIF : integer := 3; constant SYS_REG_INFO_HAS_SPIF : integer := 3; -- Has SPI flash
constant SYS_REG_INFO_HAS_LETH : integer := 4; constant SYS_REG_INFO_HAS_LETH : integer := 4; -- Has LiteEth ethernet
constant SYS_REG_INFO_HAS_LSYS : integer := 5; -- Has 6-bit address syscon
constant SYS_REG_INFO_HAS_URT1 : integer := 6; -- Has second UART
constant SYS_REG_INFO_HAS_ARTB : integer := 7; -- Has architected TB frequency


-- BRAMINFO contains the BRAM size in the bottom 52 bits -- BRAMINFO contains the BRAM size in the bottom 52 bits
-- DRAMINFO contains the DRAM size if any in the bottom 52 bits -- DRAMINFO contains the DRAM size if any in the bottom 52 bits
@ -76,6 +83,12 @@ architecture behaviour of syscon is
-- reserved for the FPGA bitfile if any -- reserved for the FPGA bitfile if any
constant SYS_REG_SPI_INFO_IS_FLASH : integer := 0; constant SYS_REG_SPI_INFO_IS_FLASH : integer := 0;


-- UART0/1 info registers bits
--
-- 0 ..31 : UART clock freq (in HZ)
-- 32 : UART is 16550 (otherwise pp)
--

-- Ctrl register -- Ctrl register
signal reg_ctrl : std_ulogic_vector(SYS_REG_CTRL_BITS-1 downto 0); signal reg_ctrl : std_ulogic_vector(SYS_REG_CTRL_BITS-1 downto 0);
signal reg_ctrl_out : std_ulogic_vector(63 downto 0); signal reg_ctrl_out : std_ulogic_vector(63 downto 0);
@ -87,13 +100,18 @@ architecture behaviour of syscon is
signal reg_dramiinfo : std_ulogic_vector(63 downto 0); signal reg_dramiinfo : std_ulogic_vector(63 downto 0);
signal reg_clkinfo : std_ulogic_vector(63 downto 0); signal reg_clkinfo : std_ulogic_vector(63 downto 0);
signal reg_spiinfo : std_ulogic_vector(63 downto 0); signal reg_spiinfo : std_ulogic_vector(63 downto 0);
signal reg_uart0info : std_ulogic_vector(63 downto 0);
signal reg_uart1info : std_ulogic_vector(63 downto 0);
signal info_has_dram : std_ulogic; signal info_has_dram : std_ulogic;
signal info_has_bram : std_ulogic; signal info_has_bram : std_ulogic;
signal info_has_uart : std_ulogic; signal info_has_uart : std_ulogic;
signal info_has_spif : std_ulogic; signal info_has_spif : std_ulogic;
signal info_has_leth : std_ulogic; signal info_has_leth : std_ulogic;
signal info_has_urt1 : std_ulogic;
signal info_clk : std_ulogic_vector(39 downto 0); signal info_clk : std_ulogic_vector(39 downto 0);
signal info_fl_off : std_ulogic_vector(31 downto 0); signal info_fl_off : std_ulogic_vector(31 downto 0);
signal uinfo_16550 : std_ulogic;
signal uinfo_freq : std_ulogic_vector(31 downto 0);


-- Wishbone response latch -- Wishbone response latch
signal wb_rsp : wb_io_slave_out; signal wb_rsp : wb_io_slave_out;
@ -110,12 +128,15 @@ begin
info_has_bram <= '1' when BRAM_SIZE /= 0 else '0'; info_has_bram <= '1' when BRAM_SIZE /= 0 else '0';
info_has_spif <= '1' when HAS_SPI_FLASH else '0'; info_has_spif <= '1' when HAS_SPI_FLASH else '0';
info_has_leth <= '1' when HAS_LITEETH else '0'; info_has_leth <= '1' when HAS_LITEETH else '0';
info_has_urt1 <= '1' when HAS_UART1 else '0';
info_clk <= std_ulogic_vector(to_unsigned(CLK_FREQ, 40)); info_clk <= std_ulogic_vector(to_unsigned(CLK_FREQ, 40));
reg_info <= (SYS_REG_INFO_HAS_UART => info_has_uart, reg_info <= (SYS_REG_INFO_HAS_UART => info_has_uart,
SYS_REG_INFO_HAS_DRAM => info_has_dram, SYS_REG_INFO_HAS_DRAM => info_has_dram,
SYS_REG_INFO_HAS_BRAM => info_has_bram, SYS_REG_INFO_HAS_BRAM => info_has_bram,
SYS_REG_INFO_HAS_SPIF => info_has_spif, SYS_REG_INFO_HAS_SPIF => info_has_spif,
SYS_REG_INFO_HAS_LETH => info_has_leth, SYS_REG_INFO_HAS_LETH => info_has_leth,
SYS_REG_INFO_HAS_LSYS => '1',
SYS_REG_INFO_HAS_URT1 => info_has_urt1,
others => '0'); others => '0');


reg_braminfo <= x"000" & std_ulogic_vector(to_unsigned(BRAM_SIZE, 52)); reg_braminfo <= x"000" & std_ulogic_vector(to_unsigned(BRAM_SIZE, 52));
@ -133,6 +154,16 @@ begin
reg_ctrl_out <= (63 downto SYS_REG_CTRL_BITS => '0', reg_ctrl_out <= (63 downto SYS_REG_CTRL_BITS => '0',
SYS_REG_CTRL_BITS-1 downto 0 => reg_ctrl); SYS_REG_CTRL_BITS-1 downto 0 => reg_ctrl);


-- UART info registers read composition
uinfo_16550 <= '1' when UART0_IS_16550 else '0';
uinfo_freq <= std_ulogic_vector(to_unsigned(CLK_FREQ, 32));
reg_uart0info <= (32 => uinfo_16550,
31 downto 0 => uinfo_freq,
others => '0');
reg_uart1info <= (32 => '1',
31 downto 0 => uinfo_freq,
others => '0');

-- Wishbone response -- Wishbone response
wb_rsp.ack <= wishbone_in.cyc and wishbone_in.stb; wb_rsp.ack <= wishbone_in.cyc and wishbone_in.stb;
with wishbone_in.adr(SYS_REG_BITS+2 downto 3) select reg_out <= with wishbone_in.adr(SYS_REG_BITS+2 downto 3) select reg_out <=
@ -144,6 +175,8 @@ begin
reg_clkinfo when SYS_REG_CLKINFO, reg_clkinfo when SYS_REG_CLKINFO,
reg_ctrl_out when SYS_REG_CTRL, reg_ctrl_out when SYS_REG_CTRL,
reg_spiinfo when SYS_REG_SPIFLASHINFO, reg_spiinfo when SYS_REG_SPIFLASHINFO,
reg_uart0info when SYS_REG_UART0_INFO,
reg_uart1info when SYS_REG_UART1_INFO,
(others => '0') when others; (others => '0') when others;
wb_rsp.dat <= reg_out(63 downto 32) when wishbone_in.adr(2) = '1' else wb_rsp.dat <= reg_out(63 downto 32) when wishbone_in.adr(2) = '1' else
reg_out(31 downto 0); reg_out(31 downto 0);

@ -25,7 +25,7 @@ int main(void)
{ {
int fail = 0; int fail = 0;


potato_uart_init(); console_init();


print_test_number(1); print_test_number(1);
if (dec_test_1() != 0) { if (dec_test_1() != 0) {

@ -23,7 +23,7 @@ int main(void)
{ {
int fail = 0; int fail = 0;


potato_uart_init(); console_init();


print_test_number(1); print_test_number(1);
if (ill_test_1() != 0) { if (ill_test_1() != 0) {

Binary file not shown.

@ -24,7 +24,7 @@ int main(void)
{ {
int fail = 0; int fail = 0;


potato_uart_init(); console_init();


print_test_number(1); print_test_number(1);
if (test_addpcis_1() != 0) { if (test_addpcis_1() != 0) {

@ -661,7 +661,7 @@ void do_test(int num, int (*test)(void))


int main(void) int main(void)
{ {
potato_uart_init(); console_init();
init_mmu(); init_mmu();


do_test(1, mmu_test_1); do_test(1, mmu_test_1);

@ -228,7 +228,7 @@ void do_test(int num, int (*fn)(unsigned long))


int main(void) int main(void)
{ {
potato_uart_init(); console_init();
init_mmu(); init_mmu();
map(0x2000, 0x2000, REF | CHG | PERM_RD | PERM_EX); /* map code page */ map(0x2000, 0x2000, REF | CHG | PERM_RD | PERM_EX); /* map code page */
map(0x7000, 0x7000, REF | CHG | PERM_RD | PERM_WR); /* map stack page */ map(0x7000, 0x7000, REF | CHG | PERM_RD | PERM_WR); /* map stack page */

@ -23,7 +23,7 @@ int main(void)
{ {
int fail = 0; int fail = 0;


potato_uart_init(); console_init();


print_test_number(1); print_test_number(1);
if (sc_test_1() != 0) { if (sc_test_1() != 0) {

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

@ -83,7 +83,7 @@ void ipi_isr(void) {
void uart_isr(void) { void uart_isr(void) {
debug_puts(UART); debug_puts(UART);


potato_uart_irq_dis(); // disable interrupt to ack it console_set_irq_en(false, false);


isrs_run |= ISR_UART; isrs_run |= ISR_UART;
} }
@ -202,7 +202,7 @@ int xics_test_1(void)
icp_write8(XICS_XIRR, 0x00); // mask all interrupts icp_write8(XICS_XIRR, 0x00); // mask all interrupts


// trigger two interrupts // trigger two interrupts
potato_uart_irq_en(); // cause serial interrupt console_set_irq_en(true,true);// cause serial interrupt
ics_write_xive(0x6, 0); // set source to prio 6 ics_write_xive(0x6, 0); // set source to prio 6
icp_write8(XICS_MFRR, 0x04); // cause ipi interrupt at prio 5 icp_write8(XICS_MFRR, 0x04); // cause ipi interrupt at prio 5


@ -222,7 +222,7 @@ int xics_test_1(void)


// cleanup // cleanup
icp_write8(XICS_XIRR, 0x00); // mask all interrupts icp_write8(XICS_XIRR, 0x00); // mask all interrupts
potato_uart_irq_dis(); console_set_irq_en(false, false);
ics_write_xive(0, 0xff); ics_write_xive(0, 0xff);
isrs_run = 0; isrs_run = 0;


@ -242,7 +242,7 @@ int xics_test_2(void)
assert(isrs_run == 0); assert(isrs_run == 0);


// trigger both // trigger both
potato_uart_irq_en(); // cause 0x500 interrupt console_set_irq_en(true, true);
icp_write8(XICS_MFRR, 0x05); // cause 0x500 interrupt icp_write8(XICS_MFRR, 0x05); // cause 0x500 interrupt


delay(); delay();
@ -250,7 +250,7 @@ int xics_test_2(void)


// cleanup // cleanup
icp_write8(XICS_XIRR, 0x00); // mask all interrupts icp_write8(XICS_XIRR, 0x00); // mask all interrupts
potato_uart_irq_dis(); console_set_irq_en(false, false);
isrs_run = 0; isrs_run = 0;


return 0; return 0;
@ -307,7 +307,7 @@ int main(void)
int i = 0; int i = 0;
int (*t)(void); int (*t)(void);


potato_uart_init(); console_init();
ipi_running = false; ipi_running = false;


/* run the tests */ /* run the tests */

Loading…
Cancel
Save