Merge pull request #205 from ozbenh/timing

Timing improvements

fpga/pp_soc_uart.vhd

@@ -107,8 +107,6 @@ architecture behaviour of pp_soc_uart is
     type wb_state_type is (IDLE, WRITE_ACK, READ_ACK);
     signal wb_state : wb_state_type;
 
-    signal wb_ack : std_logic; --! Wishbone acknowledge signal
-
     signal rxd2 : std_logic := '1';
     signal rxd3 : std_logic := '1';
     signal txd2 : std_ulogic := '1';
@@ -319,13 +317,11 @@ begin
 
     ---------- Wishbone Interface ---------- 
 
-    wb_ack_out <= wb_ack and wb_cyc_in and wb_stb_in;
-
     wishbone: process(clk)
     begin
 	if rising_edge(clk) then
 	    if reset = '1' then
-		wb_ack <= '0';
+		wb_ack_out <= '0';
 		wb_state <= IDLE;
 		send_buffer_push <= '0';
 		recv_buffer_pop <= '0';
@@ -348,7 +344,7 @@ begin
 			    end if;
 
 			    -- Invalid writes are acked and ignored.
-			    wb_ack <= '1';
+			    wb_ack_out <= '1';
 			    wb_state <= WRITE_ACK;
 			else -- Read from register
 			    if wb_adr_in = x"008" then
@@ -356,18 +352,18 @@ begin
 			    elsif wb_adr_in = x"010" then
 				wb_dat_out <= x"0" & send_buffer_full & recv_buffer_full &
 					      send_buffer_empty & recv_buffer_empty;
-				wb_ack <= '1';
+				wb_ack_out <= '1';
 			    elsif wb_adr_in = x"018" then
 				wb_dat_out <= sample_clk_divisor;
-				wb_ack <= '1';
+				wb_ack_out <= '1';
 			    elsif wb_adr_in = x"020" then
 				wb_dat_out <= (0 => irq_recv_enable,
 					       1 => irq_tx_ready_enable,
 					       others => '0');
-				wb_ack <= '1';
+				wb_ack_out <= '1';
 			    else
 				wb_dat_out <= (others => '0');
-				wb_ack <= '1';
+				wb_ack_out <= '1';
 			    end if;
 			    wb_state <= READ_ACK;
 			end if;
@@ -376,7 +372,7 @@ begin
 		    send_buffer_push <= '0';
 
 		    if wb_stb_in = '0' then
-			wb_ack <= '0';
+			wb_ack_out <= '0';
 			wb_state <= IDLE;
 		    end if;
 		when READ_ACK =>
@@ -384,11 +380,11 @@ begin
 			recv_buffer_pop <= '0';
 		    else
 			wb_dat_out <= recv_buffer_output;
-			wb_ack <= '1';
+			wb_ack_out <= '1';
 		    end if;
 
 		    if wb_stb_in = '0' then
-			wb_ack <= '0';
+			wb_ack_out <= '0';
 			wb_state <= IDLE;
 		    end if;
 		end case;

soc.vhdl

@@ -548,7 +548,7 @@ begin
 	    wb_ack_out => wb_uart0_out.ack
 	    );
     wb_uart0_out.dat <= x"000000" & uart_dat8;
-    wb_uart0_out.stall <= '0' when wb_uart0_in.cyc = '0' else not wb_uart0_out.ack;
+    wb_uart0_out.stall <= not wb_uart0_out.ack;
 
     spiflash_gen: if HAS_SPI_FLASH generate        
         spiflash: entity work.spi_flash_ctrl
@@ -609,7 +609,7 @@ begin
     no_bram: if MEMORY_SIZE = 0 generate
         wb_bram_out.ack <= wb_bram_in.cyc and wb_bram_in.stb;
         wb_bram_out.dat <= x"FFFFFFFFFFFFFFFF";
-        wb_bram_out.stall <= wb_bram_in.cyc and not wb_bram_out.ack;
+        wb_bram_out.stall <= not wb_bram_out.ack;
     end generate;
 
     -- DMI(debug bus) <-> JTAG bridge

syscon.vhdl

@@ -91,6 +91,9 @@ architecture behaviour of syscon is
     signal info_has_spif : std_ulogic;
     signal info_clk      : std_ulogic_vector(39 downto 0);
     signal info_fl_off   : std_ulogic_vector(31 downto 0);
+
+    -- Wishbone response latch
+    signal wb_rsp        : wb_io_slave_out;
 begin
 
     -- Generated output signals
@@ -98,10 +101,6 @@ begin
     soc_reset <= reg_ctrl(SYS_REG_CTRL_SOC_RESET);
     core_reset <= reg_ctrl(SYS_REG_CTRL_CORE_RESET);
 
-    -- All register accesses are single cycle
-    wishbone_out.ack <= wishbone_in.cyc and wishbone_in.stb;
-    wishbone_out.stall <= '0';
-
     -- Info register is hard wired
     info_has_uart <= '1' when HAS_UART else '0';
     info_has_dram <= '1' when HAS_DRAM else '0';
@@ -128,7 +127,8 @@ begin
     reg_ctrl_out <= (63 downto SYS_REG_CTRL_BITS => '0',
 		    SYS_REG_CTRL_BITS-1 downto 0 => reg_ctrl);
 
-    -- Register read mux
+    -- Wishbone response
+    wb_rsp.ack <= wishbone_in.cyc and wishbone_in.stb;
     with wishbone_in.adr(SYS_REG_BITS+2 downto 3) select reg_out <=
 	SIG_VALUE	when SYS_REG_SIG,
 	reg_info        when SYS_REG_INFO,
@@ -139,8 +139,18 @@ begin
 	reg_ctrl_out	when SYS_REG_CTRL,
 	reg_spiinfo	when SYS_REG_SPIFLASHINFO,
 	(others => '0') when others;
-    wishbone_out.dat <= reg_out(63 downto 32) when wishbone_in.adr(2) = '1' else
+    wb_rsp.dat   <= reg_out(63 downto 32) when wishbone_in.adr(2) = '1' else
-                        reg_out(31 downto 0);
+                  reg_out(31 downto 0);
+    wb_rsp.stall <= '0';
+
+    -- Wishbone response latch
+    regs_read: process(clk)
+    begin
+        if rising_edge(clk) then
+            -- Send response from latch
+            wishbone_out <= wb_rsp;
+        end if;
+    end process;
 
     -- Register writes
     regs_write: process(clk)