Commit Graph

8 Commits (aa1d2b16d726cd4bc4f568d514d80a3c8021926c)

Author SHA1 Message Date
Benjamin Herrenschmidt e3941109af console: Cleanup console API
Use a more generic console_init() instead of potato_uart_init(),
and do the same for interrupt control. There should be no
change in behaviour.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt bb54af59de xics: Add support for reduced priority field size
This makes the ICS support less than the 8 architected bits
and sets the soc to use 3 bits by default.

All the supported bits set translates to "masked" (and will read
back at 0xff), any small value is used as-is.

Linux doesn't use priorities above 5, so this is a way to save
silicon. The number of supported priority bits is exposed to the
OS via the config register.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 5c2fc47e2c xics: Add simple ICS
Move the external interrupt generation to a separate module
"ICS" (source controller) which a register per source containing
currently only the priority control.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 0b82024b01 tests/xics: Ensure no compiler optimisations in delay()
In case it would be tempted to "read ahead" the delay function

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 311b653d80 tests: Fix Makefile.test to not allow host includes
xics was including the host limits.h for example

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Paul Mackerras 03f9d7a97e tests/xics: Fix assumption that interrupts happen immediately
Currently the test writes to the XICS and then checks that the
expected interrupt has happened.  This turns into a stbcix
instruction followed immediately by a load from the variable that
indicates whether an interrupt has happened.  It is possible for
it to take a few cycles for the store to reach the XICS and the
interrupt request signal to come back to the core, particularly
with improvements to the load/store unit and dcache.

This therefore adds a delay between storing to the XICS and
checking for the occurrence of an interrupt, so as to give the
signals time to propagate.  The delay loop does an arbitrary 10
iterations, and each iteration does two loads and one store to
(cacheable) memory.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Benjamin Herrenschmidt a87b86e54f console: Replace putstr with puts
It makes things a bit more standard and a bit nicer to read
without all those strlen(). Also console.c takes care of adding
the carriage returns before the linefeeds.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Michael Neuling 0076f8bf1d XICS test case
Checks interrupt masking and priorities.

Adds to `make test_xics` which is run in `make check` also.

Signed-off-by: Michael Neuling <mikey@neuling.org>
5 years ago