Commit Graph

10 Commits (769f5c3a5318a1af95086c8ca693abadb493aaf9)

Author SHA1 Message Date
Paul Mackerras fdb3ef6874 Finish off taking SPRs out of register file
With this, the register file now contains 64 entries, for 32 GPRs and
32 FPRs, rather than the 128 it had previously.  Several things get
simplified - decode1 no longer has to work out the ispr{1,2,o} values,
decode_input_reg_{a,b,c} no longer have the t = SPR case, etc.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Paul Mackerras 2491aa7fc5 core: Make popcnt* take two cycles
This moves the calculation of the result for popcnt* into the
countbits unit, renamed from countzero, so that we can take two cycles
to get the result.  The motivation for this is that the popcnt*
calculation was showing up as a critical path.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Paul Mackerras a68921edca core: Fix mcrxrx, addpcis and bpermd
- mcrxrx put the bits in the wrong order

- addpcis was setting CR0 if the instruction bit 0 = 1, which it
  shouldn't

- bpermd was producing 0 always and additionally had the wrong bit
  numbering

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
3 years ago
Paul Mackerras 658feabfd4 core: Make result multiplexing explicit
This adds an explicit multiplexer feeding v.e.write_data in execute1,
with the select lines determined in the previous cycle based on the
insn_type.  Similarly, for multiply and divide instructions, there is
now an explicit multiplexer.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 83816cb9e3 core: Implement BCD Assist instructions addg6s, cdtbcd, cbcdtod
To avoid adding too much logic, this moves the adder used by OP_ADD
out of the case statement in execute1.vhdl so that the result can
be used by OP_ADDG6S as well.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras b739372f7e core: Implement the bpermd instruction
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 9b40b5a77b logical: Only do output inversion for OP_AND, OP_OR and OP_XOR
It's not needed for the other ops (popcnt, parity, etc.) and the
logical unit shows up as a critical path from time to time.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras ec2fa61792 execute1: Reduce width of the result mux to help timing
This reduces the number of different things that are assigned to
the result variable.

- The computations for the popcnt, prty, cmpb and exts instruction
  families are moved into the logical unit.
- The result of mfspr from the slow SPRs is computed in 'spr_val'
  before being assigned to 'result'.
- Writes to LR as a result of a blr or bclr instruction are done
  through the exc_write path to writeback.

This eases timing considerably.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
Paul Mackerras 0c714f1be6 execute: Move popcnt and prty instructions into the logical unit
This implements logic in the logical entity to calculate the results
of the popcnt* and prty* instructions.  We now have one insn_type_t
value for the 3 popcnt variants and one for the two prty variants,
using the length field of the decode_rom_t to distinguish between
them.  The implementations in logical.vhdl using recursive
algorithms rather than the simple functions in ppc_fx_insns.vhdl.

This gives a saving of about 140 slice LUTs on the A7-100 and
improves timing slightly.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Anton Blanchard b8fb721b81 Consolidate logical instructions
Consolidate and/andc/nand, or/orc/nor and xor/eqv, using a common
invert on the input and output. This saves us about 200 LUTs.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago