add intr masking

pull/18/head
openpowerwtf 2 years ago
parent fb9c262c1b
commit c309e9145c

@ -31,7 +31,8 @@
// interface to wb32 // interface to wb32
// //
// could pass core reset through here to allow this to be configured first // could pass core reset through here to allow this to be configured first
// could add config space // could add config space, or just use csr interface
//


`include "tri_a2o.vh" `include "tri_a2o.vh"
`ifndef A2NODE_CFG `ifndef A2NODE_CFG
@ -60,6 +61,7 @@ module a2l2wb #(
// 110 write mask rst // 110 write mask rst
// 111 write mask xor // 111 write mask xor
// also, should it be edge-triggered (single pulse from nop->cmd)? // also, should it be edge-triggered (single pulse from nop->cmd)?
// should cfg_q just be implemented in the csr itself??


input cfg_wr, input cfg_wr,
output [0:31] status, output [0:31] status,
@ -234,8 +236,13 @@ module a2l2wb #(
wire [0:4] req_tag; wire [0:4] req_tag;
wire [0:2] req_len; wire [0:2] req_len;
wire [0:255] req_st_dat; wire [0:255] req_st_dat;
wire [0:255] st_dat_swizzle;
wire [0:31] req_st_be; wire [0:31] req_st_be;
wire [0:7] req_st_we; wire [0:7] req_st_we;
wire req_endian;
wire req_st_4;
wire req_st_8;
wire req_st_16;


wire rld_coming; wire rld_coming;
wire rld_valid; wire rld_valid;
@ -254,6 +261,7 @@ module a2l2wb #(
wire qw_sel_3; wire qw_sel_3;
wire [0:7] tb_pulse_val; wire [0:7] tb_pulse_val;
wire tb_pulse_toggle; wire tb_pulse_toggle;
wire [0:3] intr_enable;


// FF // FF
always @(posedge clk) begin always @(posedge clk) begin
@ -390,6 +398,7 @@ endgenerate
assign req_tag = req_q[10:14]; assign req_tag = req_q[10:14];
assign req_adr = req_q[15:15+`REAL_IFAR_WIDTH-1]; assign req_adr = req_q[15:15+`REAL_IFAR_WIDTH-1];
assign req_len = req_q[57:59]; assign req_len = req_q[57:59];
assign req_endian = req_q[64];


assign req_st_be = std_q[0:31]; assign req_st_be = std_q[0:31];
assign req_st_we[0] = |std_q[0:3]; assign req_st_we[0] = |std_q[0:3];
@ -558,10 +567,35 @@ generate if (MEM_MODE == 2) begin
dat_sel == 2'b10 ? req_st_be[8:11] : dat_sel == 2'b10 ? req_st_be[8:11] :
req_st_be[12:15]; req_st_be[12:15];


assign wb_datw = dat_sel == 2'b00 ? req_st_dat[0:31] : /*
dat_sel == 2'b01 ? req_st_dat[32:63] : assign req_st_4 = req_st_we == 4'b1000;
dat_sel == 2'b10 ? req_st_dat[64:95] : assign req_st_8 = req_st_we == 4'b1100;
req_st_dat[96:127]; assign req_st_16 = req_st_we == 4'b1111;

assign st_dat_swizzle[0:31] = ~req_endian ? req_st_dat[0:31] :
req_st_4 ? {req_st_dat[24:31], req_st_dat[16:23], req_st_dat[8:15], req_st_dat[0:7]} :
req_st_8 ? {req_st_dat[56:63], req_st_dat[48:55], req_st_dat[40:47], req_st_dat[32:39]} :
{req_st_dat[120:127], req_st_dat[112:119], req_st_dat[104:111], req_st_dat[96:103]};


assign st_dat_swizzle[32:63] = ~req_endian ? req_st_dat[32:63] :
req_st_8 ? {req_st_dat[24:31], req_st_dat[16:23], req_st_dat[8:15], req_st_dat[0:7]} :
{req_st_dat[88:95], req_st_dat[80:87], req_st_dat[72:79], req_st_dat[64:71]};

assign st_dat_swizzle[64:95] = ~req_endian ? req_st_dat[64:95] :
{req_st_dat[56:63], req_st_dat[48:55], req_st_dat[40:47], req_st_dat[32:39]};

assign st_dat_swizzle[96:127] = ~req_endian ? req_st_dat[96:127] :
{req_st_dat[24:31], req_st_dat[16:23], req_st_dat[8:15], req_st_dat[0:7]};
*/
assign st_dat_swizzle = req_st_dat;

assign wb_datw = dat_sel == 2'b00 ? st_dat_swizzle[0:31] :
dat_sel == 2'b01 ? st_dat_swizzle[32:63] :
dat_sel == 2'b10 ? st_dat_swizzle[64:95] :
st_dat_swizzle[96:127];


end end
endgenerate endgenerate


@ -609,9 +643,9 @@ endgenerate
// these have to be examined/cleared at the source // these have to be examined/cleared at the source
assign intr_d = {4'b0, softwareInterrupt, timerInterrupt, externalInterruptS, externalInterrupt}; assign intr_d = {4'b0, softwareInterrupt, timerInterrupt, externalInterruptS, externalInterrupt};
// map for now // map for now
assign an_ac_crit_interrupt[0] = intr_q[4]; assign an_ac_crit_interrupt[0] = intr_q[4] & intr_enable[0];
assign an_ac_perf_interrupt[0] = intr_q[5]; assign an_ac_perf_interrupt[0] = intr_q[5] & intr_enable[1];
assign an_ac_ext_interrupt[0] = intr_q[6] | intr_q[7]; assign an_ac_ext_interrupt[0] = (intr_q[6] & intr_enable[2]) | (intr_q[7] & intr_enable[3]);


assign err_d = {(new_req & ~cmdseq_idle), 7'b0}; assign err_d = {(new_req & ~cmdseq_idle), 7'b0};
assign an_ac_checkstop = err_q != 0; assign an_ac_checkstop = err_q != 0;
@ -636,15 +670,16 @@ endgenerate
assign an_ac_sleep_en = cfg_q[26]; assign an_ac_sleep_en = cfg_q[26];
assign an_ac_hang_pulse = cfg_q[25]; assign an_ac_hang_pulse = cfg_q[25];



// threaded // threaded
// TO
assign an_ac_pm_thread_stop[0] = cfg_q[0]; assign an_ac_pm_thread_stop[0] = cfg_q[0];
assign an_ac_pm_fetch_halt[0] = cfg_q[1]; assign an_ac_pm_fetch_halt[0] = cfg_q[1];
assign intr_enable = cfg_q[4:7]; // crit,perf,ext,extS


assign status = {ac_an_pm_thread_running[0], ac_an_special_attn[0], ac_an_machine_check[0], assign status = {ac_an_pm_thread_running[0], ac_an_special_attn[0], ac_an_machine_check[0],
ac_an_debug_trigger[0], ac_an_power_managed, ac_an_rvwinkle_mode, 2'b0, ac_an_debug_trigger[0], ac_an_power_managed, ac_an_rvwinkle_mode, 2'b0,
8'b0, 8'b0, 8'b0, 8'b0,
4'b0, ac_an_checkstop[0:2], err_q intr_q, ac_an_checkstop[0:2], err_q
}; };





Loading…
Cancel
Save