cores
/
a2o
mirror of https://github.com/OpenPOWERFoundation/a2o
3
1
Fork 1
Code Issues Projects Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
master
pd
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'd9540ccbf3'
${ noResults }
a2o/dev/verilog/trilib/tri_serial_scom2.v

963 lines
40 KiB
Verilog
Raw Normal View History Unescape Escape

add dev
3 years ago
// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
// *!****************************************************************
// *! FILENAME : tri_serial_scom2.v
// *! DESCRIPTION : SCOM Satellite
// *! Only supports 1:1 ratio
// *!
// *!****************************************************************
`timescale 1 ns / 1 ns
`include "tri_a2o.vh"
module tri_serial_scom2(
nclk,
vdd,
gnd,
scom_func_thold,
sg,
act_dis_dc,
clkoff_dc_b,
mpw1_dc_b,
mpw2_dc_b,
d_mode_dc,
delay_lclkr_dc,
func_scan_in,
func_scan_out,
dcfg_scan_dclk,
dcfg_scan_lclk,
dcfg_d1clk,
dcfg_d2clk,
dcfg_lclk,
dcfg_scan_in,
dcfg_scan_out,
scom_local_act,
sat_id,
scom_dch_in,
scom_cch_in,
scom_dch_out,
scom_cch_out,
sc_req,
sc_ack,
sc_ack_info,
sc_r_nw,
sc_addr,
addr_v,
sc_rdata,
sc_wdata,
sc_wparity,
scom_err,
fsm_reset
);
//=====================================================================
// I/O Definition
//=====================================================================
parameter WIDTH = 64; // 64 is the maximum allowed
parameter INTERNAL_ADDR_DECODE = 1'b0;
// Made these parameters local (they don't play nice with vhdl wrapper)
//parameter [0:WIDTH-1] USE_ADDR = 64'b1000000000000000000000000000000000000000000000000000000000000000;
//parameter [0:WIDTH-1] ADDR_IS_RDABLE = 64'b1000000000000000000000000000000000000000000000000000000000000000;
//parameter [0:WIDTH-1] ADDR_IS_WRABLE = 64'b1000000000000000000000000000000000000000000000000000000000000000;
//parameter [0:WIDTH-1] PIPELINE_ADDR_V = 64'b0000000000000000000000000000000000000000000000000000000000000000;
parameter PIPELINE_PARITYCHK = 1'b0; // pipeline parcheck for timing
parameter SATID_NOBITS = 4; // should not be set by user
parameter REGID_NOBITS = 6;
parameter RINGID_NOBITS = 3;
// clock, scan and misc interfaces
input [0:`NCLK_WIDTH-1] nclk;
inout vdd;
inout gnd;
input scom_func_thold;
input sg;
input act_dis_dc;
input clkoff_dc_b;
input mpw1_dc_b;
input mpw2_dc_b;
input d_mode_dc;
input delay_lclkr_dc;
//lcb_align_0 : in std_ulogic;
//! scan chain should evaluate to 0:176 for WIDTH=64 and 6 REGID_NOBITS (=64 SCOM addresses)
//! scan chain vector is longer than number of latches being used due to
//! vhdl generics formulation and shortings
input [0:WIDTH+2*((WIDTH-1)/16+1)+(2**REGID_NOBITS)+40] func_scan_in;
output [0:WIDTH+2*((WIDTH-1)/16+1)+(2**REGID_NOBITS)+40] func_scan_out;
// for mask slat inside of c_err_rpt
input dcfg_scan_dclk;
input [0:`NCLK_WIDTH-1] dcfg_scan_lclk;
//! for nlats inside of c_err_rpt
input dcfg_d1clk; // needed for one bit only, always or scom_local_act clocked dcfg
input dcfg_d2clk; // needed for one bit only, always or scom_local_act clocked dcfg
input [0:`NCLK_WIDTH-1] dcfg_lclk; // needed for one bit only, always or scom_local_act clocked dcfg
// contains mask slat and hold nlat of c_err_rpt
input [0:1] dcfg_scan_in;
output [0:1] dcfg_scan_out;
// denotes SCOM sat active if set to '1', can be used for local clock gating
output scom_local_act;
//---------------------------------------------------------------------
// SCOM Interface
//---------------------------------------------------------------------
// SCOM satellite ID tied to a specific pattern
input [0:SATID_NOBITS-1] sat_id;
// SCOM Data Channel input (carry both address and data)
input scom_dch_in;
// SCOM Control Channel input
input scom_cch_in;
// SCOM Data Channel output
output scom_dch_out;
// SCOM Control Channel output
output scom_cch_out;
//---------------------------------------------------------------------
// Interface between SCOM satellite and internal macro logic
//---------------------------------------------------------------------
// denotes a request if asserted to '1', level
output sc_req;
// acknowledge a pending request with sc_ack_info+sc_rdata+sc_rparity
// being valid
input sc_ack;
// acknowledge information
// 0: '1' if access violation, otherwise '0'
// 1: '1' if register address invalid
input [0:1] sc_ack_info;
// '1' if read access, '0' write access
output sc_r_nw;
// Register address, default 6 bits for up to 64 register addresses
output [0:REGID_NOBITS-1] sc_addr;
// one-hot address, valid only if INTERNAL_ADDR_DECODE=TRUE, else zeros
output [0:WIDTH-1] addr_v;
// Read data delivered by macro logic as response to a read request
input [0:WIDTH-1] sc_rdata;
// Write data delivered from SCOM satellite for a write request
output [0:WIDTH-1] sc_wdata;
// Write data parity bit over sc_wdata, optional usage
output sc_wparity;
//---------------------------------------------------------------------
// parity error of fsm state vector, wire to next local fir
output scom_err;
// reset fsm (optional), tie to '0' if unused
input fsm_reset;
//=====================================================================
// Signal Declarations
//=====================================================================
parameter [0:WIDTH-1] USE_ADDR = 64'b1000000000000000000000000000000000000000000000000000000000000000;
parameter [0:WIDTH-1] ADDR_IS_RDABLE = 64'b1000000000000000000000000000000000000000000000000000000000000000;
parameter [0:WIDTH-1] ADDR_IS_WRABLE = 64'b1000000000000000000000000000000000000000000000000000000000000000;
parameter [0:WIDTH-1] PIPELINE_ADDR_V = 64'b0000000000000000000000000000000000000000000000000000000000000000;
parameter STATE_WIDTH = 5;
parameter PAR_NOBITS = (WIDTH - 1)/16 + 1;
parameter REG_NOBITS = REGID_NOBITS;
parameter SATID_REGID_NOBITS = SATID_NOBITS + REGID_NOBITS;
parameter RW_BIT_INDEX = SATID_REGID_NOBITS + 1;
parameter PARBIT_INDEX = RW_BIT_INDEX + 1;
parameter HEAD_WIDTH = PARBIT_INDEX + 1;
parameter [0:HEAD_WIDTH-1] HEAD_INIT = 13'b0000000000000;
// 0123Parity
parameter [0:STATE_WIDTH-1] IDLE = 5'b00000; // 0 = x00
parameter [0:STATE_WIDTH-1] REC_HEAD = 5'b00011; // 1 = x03
parameter [0:STATE_WIDTH-1] CHECK_BEFORE= 5'b00101; // 2 = x05
parameter [0:STATE_WIDTH-1] REC_WDATA = 5'b00110; // 3 = x06
parameter [0:STATE_WIDTH-1] REC_WPAR = 5'b01001; // 4 = x09
parameter [0:STATE_WIDTH-1] EXE_CMD = 5'b01010; // 5 = x0A
parameter [0:STATE_WIDTH-1] FILLER0 = 5'b01100; // 6 = x0C
parameter [0:STATE_WIDTH-1] FILLER1 = 5'b01111; // 7 = x0F
parameter [0:STATE_WIDTH-1] GEN_ULINFO = 5'b10001; // 8 = x11
parameter [0:STATE_WIDTH-1] SEND_ULINFO = 5'b10010; // 9 = x12
parameter [0:STATE_WIDTH-1] SEND_RDATA = 5'b10100; // 10 = x14
parameter [0:STATE_WIDTH-1] SEND_0 = 5'b10111; // 11 = x17
parameter [0:STATE_WIDTH-1] SEND_1 = 5'b11000; // 12 = x18
parameter [0:STATE_WIDTH-1] CHECK_WPAR = 5'b11011; // 13 = x1B
// 14 = x1D
parameter [0:STATE_WIDTH-1] NOT_SELECTED= 5'b11110; // 15 = x1E
parameter EOF_WDATA = PARBIT_INDEX - 1 + 64; // here max width, it is 64
parameter EOF_WPAR = EOF_WDATA + 4;
parameter EOF_WDATA_N = PARBIT_INDEX - 1 + WIDTH;
parameter EOF_WPAR_M = EOF_WDATA + PAR_NOBITS;
parameter CNT_SIZE = 7;
wire is_idle;
wire is_rec_head;
wire is_check_before;
wire is_rec_wdata;
wire is_rec_wpar;
wire is_exe_cmd;
wire is_gen_ulinfo;
wire is_send_ulinfo;
wire is_send_rdata;
wire is_send_0;
wire is_send_1;
wire is_filler_0;
wire is_filler_1;
reg [0:STATE_WIDTH-1] next_state;
wire [0:STATE_WIDTH-1] state_in;
wire [0:STATE_WIDTH-1] state_lt;
wire dch_lt;
wire [0:1] cch_in;
wire [0:1] cch_lt;
wire reset;
wire got_head;
wire gor_eofwdata;
wire got_eofwpar;
wire sent_rdata;
wire got_ulhead;
wire do_send_par;
wire cntgtheadpluswidth;
wire cntgteofwdataplusparity;
wire p0_err;
wire any_ack_error;
wire match;
wire do_write;
wire do_read;
wire [0:CNT_SIZE-1] cnt_in;
wire [0:CNT_SIZE-1] cnt_lt;
wire [0:HEAD_WIDTH-1] head_in;
wire [0:HEAD_WIDTH-1] head_lt;
wire [0:4] tail_in;
wire [0:4] tail_lt;
wire [0:1] sc_ack_info_in;
wire [0:1] sc_ack_info_lt;
wire head_mux;
wire [0:WIDTH-1] data_shifter_in;
wire [0:WIDTH-1] data_shifter_lt;
wire [0:63] data_shifter_lt_tmp;
wire [0:PAR_NOBITS-1] datapar_shifter_in;
wire [0:PAR_NOBITS-1] datapar_shifter_lt;
wire data_mux;
wire par_mux;
wire dch_out_internal_in;
wire dch_out_internal_lt;
wire parity_satid_regaddr;
wire func_force;
wire func_thold_b;
wire d1clk;
wire d2clk;
wire [0:`NCLK_WIDTH-1] lclk;
wire local_act;
wire local_act_int;
wire scom_err_in;
wire scom_err_lt;
wire scom_local_act_in;
wire scom_local_act_lt;
wire wpar_err;
wire [0:PAR_NOBITS-1] par_data_in;
wire [0:PAR_NOBITS-1] par_data_lt;
wire [0:PAR_NOBITS-1] sc_rparity;
wire read_valid;
wire write_valid;
wire [0:WIDTH-1] dec_addr_in;
wire [0:WIDTH-1] dec_addr_q;
wire addr_nvld;
wire write_nvld;
wire read_nvld;
wire state_par_error;
wire [0:SATID_NOBITS-1] sat_id_net;
wire spare_latch1_in;
wire spare_latch1_lt;
wire spare_latch2_in;
wire spare_latch2_lt;
// Don't reference unused inputs:
(* analysis_not_referenced="true" *)
wire [0:1] unused;
(* analysis_not_referenced="true" *)
wire unused_signals;
tri_lcbor lcbor_func(
.clkoff_b(clkoff_dc_b),
.thold(scom_func_thold),
.sg(sg),
.act_dis(act_dis_dc),
.force_t(func_force),
.thold_b(func_thold_b)
);
tri_lcbnd lcb_func(
.vd(vdd),
.gd(gnd),
.act(local_act_int),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.nclk(nclk),
.force_t(func_force),
.sg(sg),
.thold_b(func_thold_b),
//--------------------------
.d1clk(d1clk),
.d2clk(d2clk),
.lclk(lclk)
);
//-----------------------------------------------------------------------------
tri_err_rpt #(.WIDTH(1), // use to bundle error reporting checkers of the same exact type
.INLINE(1'b0), // make hold latch be inline
.MASK_RESET_VALUE(1'b0), // do not report address and data parity errors by default
.NEEDS_SRESET(1) // since already reported to PCB through error reply
) parity_err(
.vd(vdd),
.gd(gnd),
.err_d1clk(dcfg_d1clk),
.err_d2clk(dcfg_d2clk),
.err_lclk(dcfg_lclk),
.err_scan_in(dcfg_scan_in[0:0]),
.err_scan_out(dcfg_scan_out[0:0]),
.mode_dclk(dcfg_scan_dclk),
.mode_lclk(dcfg_scan_lclk),
.mode_scan_in(dcfg_scan_in[1:1]),
.mode_scan_out(dcfg_scan_out[1:1]),
//--------------------------
.err_in(state_par_error),
.err_out(scom_err_in)
);
assign scom_err = scom_err_lt; // drive this output with a latch / 1.35
//-----------------------------------------------------------------------------
// fill spares of scan vector
assign func_scan_out[STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22+(2**REGID_NOBITS):WIDTH+(2*((WIDTH-1)/16+1))+(2**REGID_NOBITS)+40] =
func_scan_in[ STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22+(2**REGID_NOBITS):WIDTH+(2*((WIDTH-1)/16+1))+(2**REGID_NOBITS)+40];
//-----------------------------------------------------------------------------
assign sat_id_net = sat_id;
assign cch_in = {scom_cch_in, cch_lt[0]};
assign reset = (cch_lt[0] & (~scom_cch_in)) | // with falling edge of scom_cch_in
fsm_reset | // or with fsm_reset
scom_err_lt; // MP timing fix -- or state_par_error;
assign local_act = (|{scom_cch_in, cch_lt}); // active with scom_cch_in and as long as cch_lt
assign local_act_int = local_act | scom_local_act_lt; // MP... and scom_local_act_lt is cleared
assign scom_local_act_in = local_act; // drive this output with a latch / 1.35
assign scom_local_act = scom_local_act_lt;
assign scom_cch_out = cch_lt[0];
assign dch_out_internal_in = (is_send_ulinfo == 1'b1) ? head_lt[0] :
(is_send_0 == 1'b1) ? 1'b0 :
(is_send_1 == 1'b1) ? 1'b1 :
((is_send_rdata & (~do_send_par)) == 1'b1) ? data_shifter_lt[0] :
((is_send_rdata & do_send_par) == 1'b1) ? datapar_shifter_lt[0] :
dch_lt;
assign scom_dch_out = dch_out_internal_lt;
assign sc_req = is_exe_cmd;
assign sc_addr = head_lt[SATID_NOBITS + 1:SATID_REGID_NOBITS];
assign sc_r_nw = head_lt[RW_BIT_INDEX];
assign sc_wdata = data_shifter_lt;
assign sc_wparity = (^datapar_shifter_lt);
//-----------------------------------------------------------------------------
// FSM: serial => parallel => serial state machine
//
yosys cleanup
2 years ago
always @*
add dev
3 years ago
begin: fsm_transition
next_state = state_lt;
case (state_lt)
IDLE :
if (dch_lt == 1'b1)
next_state = REC_HEAD;
REC_HEAD :
if ((got_head) == 1'b1)
next_state = CHECK_BEFORE;
CHECK_BEFORE :
if (match == 1'b0)
next_state = NOT_SELECTED;
else if (((read_nvld | p0_err) & do_read) == 1'b1)
next_state = FILLER0;
else if (((~p0_err) & (~read_nvld) & do_read) == 1'b1)
next_state = EXE_CMD;
else
next_state = REC_WDATA;
REC_WDATA :
if (gor_eofwdata == 1'b1)
next_state = REC_WPAR;
REC_WPAR :
if ((got_eofwpar & (~p0_err)) == 1'b1)
// next_state = EXE_CMD;
next_state = CHECK_WPAR;
else if ((got_eofwpar & p0_err) == 1'b1)
next_state = FILLER0;
CHECK_WPAR :
if (wpar_err == 1'b0)
next_state = EXE_CMD;
else
next_state = FILLER1;
EXE_CMD :
if (sc_ack == 1'b1)
next_state = FILLER1;
FILLER0 :
next_state = FILLER1;
FILLER1 :
next_state = GEN_ULINFO;
GEN_ULINFO :
next_state = SEND_ULINFO;
SEND_ULINFO :
if ((got_ulhead & (do_write | (do_read & any_ack_error))) == 1'b1)
next_state = SEND_0;
else if ((got_ulhead & do_read & (~any_ack_error)) == 1'b1)
next_state = SEND_RDATA;
SEND_RDATA :
if (sent_rdata == 1'b1)
next_state = SEND_0;
SEND_0 :
next_state = SEND_1;
SEND_1 :
next_state = IDLE;
NOT_SELECTED :
if (cch_lt[0] == 1'b0)
next_state = IDLE;
default :
next_state = IDLE;
endcase
end
assign state_in = (local_act == 1'b0) ? state_lt :
(reset == 1'b1) ? IDLE :
next_state;
assign state_par_error = (^state_lt);
//-----------------------------------------------------------------------------
assign is_idle = (state_lt == IDLE);
assign is_rec_head = (state_lt == REC_HEAD);
assign is_check_before = (state_lt == CHECK_BEFORE);
assign is_rec_wdata = (state_lt == REC_WDATA);
assign is_rec_wpar = (state_lt == REC_WPAR);
assign is_exe_cmd = (state_lt == EXE_CMD);
assign is_gen_ulinfo = (state_lt == GEN_ULINFO);
assign is_send_ulinfo = (state_lt == SEND_ULINFO);
assign is_send_rdata = (state_lt == SEND_RDATA);
assign is_send_0 = (state_lt == SEND_0);
assign is_send_1 = (state_lt == SEND_1);
assign is_filler_0 = (state_lt == FILLER0);
assign is_filler_1 = (state_lt == FILLER1);
//-----------------------------------------------------------------------------
assign cnt_in = ((is_idle | is_gen_ulinfo) == 1'b1) ? 7'b0000000 :
((is_rec_head | is_check_before | is_rec_wdata |
is_rec_wpar | is_send_ulinfo | is_send_rdata |
is_send_0 | is_send_1) == 1'b1) ? cnt_lt + 7'b0000001 :
cnt_lt;
// downlink head (command) has been received when start bit, satellite id and register id have been received
assign got_head = ({{32-CNT_SIZE{1'b0}},cnt_lt} == (1 + SATID_NOBITS + REGID_NOBITS));
// uplink head (response) has been received when start bit, satellite id, register id and 4 ack bits have been received
assign got_ulhead = ({{32-CNT_SIZE{1'b0}},cnt_lt} == (1 + SATID_NOBITS + REGID_NOBITS + 4));
assign gor_eofwdata = ({{32-CNT_SIZE{1'b0}},cnt_lt} == EOF_WDATA);
assign got_eofwpar = ({{32-CNT_SIZE{1'b0}},cnt_lt} == EOF_WPAR);
// for sent_rdata: 1 start, 10 sat_id + reg, 4 ack, 1 p, 64 data = 84, but count from 0 is 1st bit => 83 is end
assign sent_rdata = (cnt_lt == 7'd83);
assign cntgtheadpluswidth = ({{32-CNT_SIZE{1'b0}},cnt_lt} > EOF_WDATA_N);
assign cntgteofwdataplusparity = ({{32-CNT_SIZE{1'b0}},cnt_lt} > EOF_WPAR_M);
assign do_send_par = ({{32-CNT_SIZE{1'b0}},cnt_lt} > 79); // 78 bits=15 ulhead + 64 data
//-----------------------------------------------------------------------------
// shift downlink command (for this or any subsequent satellite) or uplink response (from previous satellite)
assign head_in[HEAD_WIDTH-2:HEAD_WIDTH-1] = ((is_rec_head | (is_idle & dch_lt)) == 1'b1) ? {head_lt[HEAD_WIDTH-1], dch_lt} :
head_lt[HEAD_WIDTH-2:HEAD_WIDTH-1];
assign head_in[0:SATID_REGID_NOBITS] = ((is_rec_head | is_send_ulinfo) == 1'b1) ? {head_lt[1:SATID_REGID_NOBITS], head_mux} :
head_lt[0:SATID_REGID_NOBITS];
assign head_mux = (is_rec_head == 1'b1) ? head_lt[RW_BIT_INDEX] :
tail_lt[0];
// calculate parity P0 of uplink frame
assign tail_in[4] = (is_gen_ulinfo == 1'b1 & (INTERNAL_ADDR_DECODE == 1'b0)) ? (^({parity_satid_regaddr, tail_lt[0], (wpar_err & do_write), sc_ack_info_lt[0:1]})) :
(is_gen_ulinfo == 1'b1 & (INTERNAL_ADDR_DECODE == 1'b1)) ? (^({parity_satid_regaddr, tail_lt[0], (wpar_err & do_write), (write_nvld | read_nvld), addr_nvld})) :
tail_lt[4];
// copy sampled ack_info coming from logic
assign tail_in[2:3] = (is_gen_ulinfo == 1'b1 & INTERNAL_ADDR_DECODE == 1'b0) ? sc_ack_info_lt[0:1] :
(is_gen_ulinfo == 1'b1 & INTERNAL_ADDR_DECODE == 1'b1) ? {(write_nvld | read_nvld), addr_nvld} :
(is_send_ulinfo == 1'b1) ? tail_lt[3:4] : // shift out
tail_lt[2:3];
// Write Data Parity error
assign tail_in[1] = (is_gen_ulinfo == 1'b1) ? (wpar_err & do_write) : // parity error on write operation
(is_send_ulinfo == 1'b1) ? tail_lt[2] : // shift out
tail_lt[1];
// parity check of of downlink P0 yields error
assign tail_in[0] = (is_check_before == 1'b1) ? (~p0_err) : // set to '1' if a downlink parity error is detected by satellite, otherwise '0'
(is_send_ulinfo == 1'b1) ? tail_lt[1] : // shift out
tail_lt[0];
// sample and hold ack_info, one spare bit
assign sc_ack_info_in = ((is_exe_cmd & sc_ack) == 1'b1) ? sc_ack_info :
(is_idle == 1'b1) ? 2'b00 :
sc_ack_info_lt;
//-----------------------------------------------------------------------------
assign do_write = (~do_read);
assign do_read = head_lt[RW_BIT_INDEX];
assign match = (head_lt[1:SATID_NOBITS] == sat_id_net);
// if downlink parity error then set p0_err
assign p0_err = (is_check_before & (^(head_lt[1:PARBIT_INDEX])));
// why constant 11 here: ???
// first part sat id; second part reg address (curr. 6 bits) => 10 instead of 11
// now new constant SATID_REGID_NOBITS
assign parity_satid_regaddr = (^{sat_id_net, head_lt[SATID_NOBITS+1:SATID_REGID_NOBITS]});
assign any_ack_error = (|sc_ack_info_lt);
//-----------------------------------------------------------------------------
assign data_mux = ((is_check_before | is_rec_wdata) == 1'b1) ? dch_lt : 1'b0;
assign data_shifter_in = ((is_check_before | (is_rec_wdata & (~cntgtheadpluswidth)) | is_send_rdata) == 1'b1) ? {data_shifter_lt[1:WIDTH-1], data_mux} :
((is_exe_cmd & sc_ack & do_read) == 1'b1) ? sc_rdata :
data_shifter_lt;
//-----------------------------------------------------------------------------
// parity handling
assign par_mux = ((is_rec_wpar) == 1'b1) ? dch_lt : 1'b0;
// receiving parity: shift when receiving write data parity
// sending parity of read data: shift when sending read data parity
// latch generated parity of read data when read data is accepted
assign datapar_shifter_in = (((is_rec_wpar & (~cntgteofwdataplusparity)) | (is_send_rdata & do_send_par)) == 1'b1) ? {datapar_shifter_lt[1:PAR_NOBITS-1], par_mux} :
((is_filler_1 == 1'b1)) ? sc_rparity :
datapar_shifter_lt;
//----------------------------------------------------------------------------
assign data_shifter_lt_tmp[0:WIDTH-1] = data_shifter_lt;
generate
if (WIDTH < 64)
begin : data_shifter_padding
assign data_shifter_lt_tmp[WIDTH:63] = {64-WIDTH {1'b0}};
end
endgenerate
generate
begin : xhdl0
genvar i;
for (i=0; i<=PAR_NOBITS-1; i=i+1)
begin : wdata_par_check
assign par_data_in[i] = (^data_shifter_lt_tmp[16*i:16*(i+1)-1]);
end
end
endgenerate
generate
if (PIPELINE_PARITYCHK == 1'b1)
begin : wdata_par_check_pipe
tri_nlat_scan #(.WIDTH(PAR_NOBITS), .NEEDS_SRESET(1)) state(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+22:STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+21]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+22:STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+21]),
.din(par_data_in),
.q(par_data_lt)
);
end
endgenerate
generate
if (PIPELINE_PARITYCHK == 1'b0)
begin : wdata_par_check_nopipe
assign par_data_lt = par_data_in;
assign func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+22:STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+21] =
func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+22:STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+21];
end
endgenerate
assign wpar_err = (^{par_data_lt, datapar_shifter_lt});
//-----------------------------------------------------------------------------
generate
begin : xhdl1
genvar i;
for (i=0; i<=PAR_NOBITS-1; i=i+1)
begin : rdata_parity_gen
assign sc_rparity[i] = (^data_shifter_lt_tmp[16*i:16*(i+1)-1]);
end
end
endgenerate
//-----------------------------------------------------------------------------
//-----------------------------------------------------------------
// address decoding section
// Generate onehot Address (binary to one-hot)
//-----------------------------------------------------------------
//-----------------------------------------------------------------------------
generate
if (INTERNAL_ADDR_DECODE == 1'b1)
begin : internal_addr_decoding
//-----------------------------------------------------------------------------
genvar i;
for (i=0; i<WIDTH; i=i+1)
begin : foralladdresses
if ( USE_ADDR[i] == 1'b1)
begin : addr_bit_set
assign dec_addr_in[i] = (head_lt[SATID_NOBITS+1:SATID_REGID_NOBITS] == i);
// generate latch to hold addr_v only if required
if ( PIPELINE_ADDR_V[i] == 1'b1)
begin : latch_for_onehot
tri_nlat #(.WIDTH(1), .NEEDS_SRESET(1)) dec_addr(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.d2clk(d2clk),
.lclk(lclk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i]),
.din(dec_addr_in[i]),
.q(dec_addr_q[i])
);
end
// otherwise no latch
if ( PIPELINE_ADDR_V[i] == 1'b0)
begin : no_latch_for_onehot
assign func_scan_out[STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i] =
func_scan_in[ STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i];
assign dec_addr_q[i] = dec_addr_in[i];
end
end
//----------------------------------------------------------------------
if ( USE_ADDR[i] != 1'b1) // do not generate hardware for unused addresses
begin : addr_bit_notset
assign func_scan_out[STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i] =
func_scan_in[ STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i];
assign dec_addr_in[i] = 1'b0;
assign dec_addr_q[i] = dec_addr_in[i];
end
end
//------------------------------------------------------------------------
// check writable and/or readable
assign read_valid = (|(dec_addr_q & ADDR_IS_RDABLE));
assign write_valid = (|(dec_addr_q & ADDR_IS_WRABLE));
assign addr_nvld = (~(|dec_addr_q));
assign write_nvld = ((~write_valid) & (~addr_nvld)) & do_write;
assign read_nvld = ((~read_valid) & (~addr_nvld)) & do_read;
assign unused = 2'b00;
end
endgenerate
generate
if (INTERNAL_ADDR_DECODE == 1'b0)
begin : external_addr_decoding
genvar i;
for (i=0; i<WIDTH ; i=i+1)
begin : foralladdresses
assign func_scan_out[STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i] =
func_scan_in[ STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i];
assign dec_addr_in[i] = 1'b0;
assign dec_addr_q[i] = dec_addr_in[i];
end
assign read_valid = 1'b1; // suppressing wrong error generation
assign write_valid = 1'b1; // suppressing wrong error generation
assign addr_nvld = 1'b0;
assign write_nvld = 1'b0;
assign read_nvld = 1'b0;
assign unused = {write_valid, read_valid};
end
endgenerate
// This was for unused addresses if USE_ADDR was smaller than the 64 bit width.
// From VHDL: short_unused_addr_range: for i in use_addr'high+1 to 63 generate
// Shouldn't be needed for A2, since we always define 64 SCOM addresses.
generate
begin : xhdl4
genvar i;
for (i=WIDTH; i<64; i=i+1)
begin : short_unused_addr_range
assign func_scan_out[STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i] =
func_scan_in[ STATE_WIDTH+WIDTH+(2*PAR_NOBITS)+HEAD_WIDTH+22 +i];
end
end
endgenerate
assign addr_v = dec_addr_q[0:WIDTH-1];
//-----------------------------------------------------------------------------
tri_nlat_scan #(.WIDTH(STATE_WIDTH), .INIT(IDLE), .NEEDS_SRESET(1)) state(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ 0:STATE_WIDTH-1]),
.scan_out(func_scan_out[0:STATE_WIDTH-1]),
.din(state_in),
.q(state_lt)
);
tri_nlat_scan #(.WIDTH(7), .INIT(7'b0000000), .NEEDS_SRESET(1)) counter(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH:STATE_WIDTH+6]),
.scan_out(func_scan_out[STATE_WIDTH:STATE_WIDTH+6]),
.din(cnt_in),
.q(cnt_lt)
);
tri_nlat_scan #(.WIDTH(WIDTH), .NEEDS_SRESET(1)) data_shifter(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+7:STATE_WIDTH+WIDTH+6]),
.scan_out(func_scan_out[STATE_WIDTH+7:STATE_WIDTH+WIDTH+6]),
.din(data_shifter_in),
.q(data_shifter_lt)
);
tri_nlat_scan #(.WIDTH(PAR_NOBITS), .NEEDS_SRESET(1)) datapar_shifter(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+7:STATE_WIDTH+WIDTH+PAR_NOBITS+6]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+7:STATE_WIDTH+WIDTH+PAR_NOBITS+6]),
.din(datapar_shifter_in),
.q(datapar_shifter_lt)
);
tri_nlat_scan #(.WIDTH(HEAD_WIDTH), .INIT(HEAD_INIT), .NEEDS_SRESET(1)) head_lat(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+7:STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+6]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+7:STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+6]),
.din(head_in),
.q(head_lt)
);
tri_nlat_scan #(.WIDTH(5), .INIT(5'b00000), .NEEDS_SRESET(1)) tail_lat(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+7:STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+11]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+7:STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+11]),
.din(tail_in),
.q(tail_lt)
);
tri_nlat #(.WIDTH(1), .NEEDS_SRESET(1)) dch_inlatch(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+12]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+12]),
.din(scom_dch_in),
.q(dch_lt)
);
tri_nlat_scan #(.WIDTH(2), .NEEDS_SRESET(1)) ack_info(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+13:STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+14]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+13:STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+14]),
.din(sc_ack_info_in),
.q(sc_ack_info_lt)
);
tri_nlat #(.WIDTH(1), .NEEDS_SRESET(1)) dch_outlatch(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+15]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+15]),
.din(dch_out_internal_in),
.q(dch_out_internal_lt)
);
tri_nlat_scan #(.WIDTH(2), .NEEDS_SRESET(1)) cch_latches(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+16:STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+17]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+16:STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+17]),
.din(cch_in),
.q(cch_lt)
);
tri_nlat #(.WIDTH(1), .NEEDS_SRESET(1)) scom_err_latch(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+18]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+18]),
.din(scom_err_in),
.q(scom_err_lt)
);
tri_nlat #(.WIDTH(1), .NEEDS_SRESET(1)) scom_local_act_latch(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+19]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+19]),
.din(scom_local_act_in),
.q(scom_local_act_lt)
);
tri_nlat #(.WIDTH(1), .NEEDS_SRESET(1)) spare_latch1(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+20]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+20]),
.din(spare_latch1_in),
.q(spare_latch1_lt)
);
tri_nlat #(.WIDTH(1), .NEEDS_SRESET(1)) spare_latch2(
.d1clk(d1clk),
.vd(vdd),
.gd(gnd),
.lclk(lclk),
.d2clk(d2clk),
.scan_in(func_scan_in[ STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+21]),
.scan_out(func_scan_out[STATE_WIDTH+WIDTH+PAR_NOBITS+HEAD_WIDTH+21]),
.din(spare_latch2_in),
.q(spare_latch2_lt)
);
//-----------------------------------------------------------------------------
assign unused_signals = |({is_filler_0, is_filler_1, spare_latch1_lt, spare_latch2_lt, d_mode_dc});
assign spare_latch1_in = 1'b0;
assign spare_latch2_in = 1'b0;
endmodule