You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1694 lines
70 KiB
Verilog

3 years ago
// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
//*****************************************************************************
//*
//* TITLE: F_DP_FPR
//*
//* NAME: fu_fpr.vhdl
//*
//* DESC: This is the Floating Point Register file
//*
//*****************************************************************************
`include "tri_a2o.vh"
module fu_fpr(
nclk,
clkoff_b,
act_dis,
flush,
delay_lclkra,
delay_lclkrb,
mpw1_ba,
mpw1_bb,
mpw2_b,
abst_sl_thold_1,
time_sl_thold_1,
ary_nsl_thold_1,
gptr_sl_thold_0,
fce_1,
thold_1,
sg_1,
scan_dis_dc_b,
scan_diag_dc,
lbist_en_dc,
f_fpr_si,
f_fpr_so,
f_fpr_ab_si,
f_fpr_ab_so,
time_scan_in,
time_scan_out,
gptr_scan_in,
gptr_scan_out,
vdd,
// vcs,
gnd,
pc_fu_abist_di_0,
pc_fu_abist_di_1,
pc_fu_abist_ena_dc,
pc_fu_abist_grf_renb_0,
pc_fu_abist_grf_renb_1,
pc_fu_abist_grf_wenb_0,
pc_fu_abist_grf_wenb_1,
pc_fu_abist_raddr_0,
pc_fu_abist_raddr_1,
pc_fu_abist_raw_dc_b,
pc_fu_abist_waddr_0,
pc_fu_abist_waddr_1,
pc_fu_abist_wl144_comp_ena,
pc_fu_inj_regfile_parity,
f_dcd_msr_fp_act,
iu_fu_rf0_fra_v,
iu_fu_rf0_frb_v,
iu_fu_rf0_frc_v,
iu_fu_rf0_str_v,
iu_fu_rf0_tid,
f_dcd_rf0_fra,
f_dcd_rf0_frb,
f_dcd_rf0_frc,
f_dcd_rf0_tid,
iu_fu_rf0_ldst_tag,
f_dcd_ex6_frt_tid,
f_dcd_ex7_frt_addr,
f_dcd_ex7_frt_tid,
f_dcd_ex7_frt_wen,
f_rnd_ex7_res_expo,
f_rnd_ex7_res_frac,
f_rnd_ex7_res_sign,
xu_fu_ex5_load_val,
xu_fu_ex5_load_tag,
xu_fu_ex5_load_data,
lq_gpr_rel_we,
lq_gpr_rel_le,
lq_gpr_rel_wa,
lq_gpr_rel_wd,
f_fpr_ex6_load_addr,
f_fpr_ex6_load_v,
f_fpr_ex6_reload_addr,
f_fpr_ex6_reload_v,
f_fpr_ex1_s_sign,
f_fpr_ex1_s_expo,
f_fpr_ex1_s_frac,
f_fpr_ex1_a_sign,
f_fpr_ex1_a_expo,
f_fpr_ex1_a_frac,
f_fpr_ex1_c_sign,
f_fpr_ex1_c_expo,
f_fpr_ex1_c_frac,
f_fpr_ex1_b_sign,
f_fpr_ex1_b_expo,
f_fpr_ex1_b_frac,
f_fpr_ex8_frt_sign,
f_fpr_ex8_frt_expo,
f_fpr_ex8_frt_frac,
f_fpr_ex9_frt_sign,
f_fpr_ex9_frt_expo,
f_fpr_ex9_frt_frac,
f_fpr_ex6_load_sign,
f_fpr_ex6_load_expo,
f_fpr_ex6_load_frac,
f_fpr_ex7_load_sign,
f_fpr_ex7_load_expo,
f_fpr_ex7_load_frac,
f_fpr_ex8_load_sign,
f_fpr_ex8_load_expo,
f_fpr_ex8_load_frac,
f_fpr_ex6_reload_sign,
f_fpr_ex6_reload_expo,
f_fpr_ex6_reload_frac,
f_fpr_ex7_reload_sign,
f_fpr_ex7_reload_expo,
f_fpr_ex7_reload_frac,
f_fpr_ex8_reload_sign,
f_fpr_ex8_reload_expo,
f_fpr_ex8_reload_frac,
f_fpr_ex2_s_expo_extra,
f_fpr_ex2_a_par,
f_fpr_ex2_b_par,
f_fpr_ex2_c_par,
f_fpr_ex2_s_par
);
parameter fpr_pool = 64;
parameter fpr_pool_enc = 7;
parameter threads = 2;
parameter axu_spare_enc = 3;
input [0:`NCLK_WIDTH-1] nclk;
input clkoff_b; // tiup
input act_dis; // ??tidn??
input flush; // ??tidn??
input [0:1] delay_lclkra; // tidn,
input [6:7] delay_lclkrb;
input [0:1] mpw1_ba; // tidn,
input [6:7] mpw1_bb;
input [0:1] mpw2_b; // tidn,
input abst_sl_thold_1;
input time_sl_thold_1;
input ary_nsl_thold_1;
input gptr_sl_thold_0;
input fce_1;
input thold_1;
input sg_1;
input scan_dis_dc_b;
input scan_diag_dc;
input lbist_en_dc;
input f_fpr_si;
output f_fpr_so;
input f_fpr_ab_si;
output f_fpr_ab_so;
input time_scan_in;
output time_scan_out;
input gptr_scan_in;
output gptr_scan_out;
inout vdd;
//inout vcs;
inout gnd;
// ABIST
input [0:3] pc_fu_abist_di_0;
input [0:3] pc_fu_abist_di_1;
input pc_fu_abist_ena_dc;
input pc_fu_abist_grf_renb_0;
input pc_fu_abist_grf_renb_1;
input pc_fu_abist_grf_wenb_0;
input pc_fu_abist_grf_wenb_1;
input [0:9] pc_fu_abist_raddr_0;
input [0:9] pc_fu_abist_raddr_1;
input pc_fu_abist_raw_dc_b;
input [0:9] pc_fu_abist_waddr_0;
input [0:9] pc_fu_abist_waddr_1;
input pc_fu_abist_wl144_comp_ena;
input [0:`THREADS-1] pc_fu_inj_regfile_parity;
input f_dcd_msr_fp_act;
input iu_fu_rf0_fra_v;
input iu_fu_rf0_frb_v;
input iu_fu_rf0_frc_v;
input iu_fu_rf0_str_v;
// Interface to IU
input [0:threads-1] iu_fu_rf0_tid; // one hot
input [0:5] f_dcd_rf0_fra;
input [0:5] f_dcd_rf0_frb;
input [0:5] f_dcd_rf0_frc;
input [0:1] f_dcd_rf0_tid;
input [0:9] iu_fu_rf0_ldst_tag;
//----------------------------------------------
input [0:1] f_dcd_ex6_frt_tid; // one hot
input [0:5] f_dcd_ex7_frt_addr;
input [0:1] f_dcd_ex7_frt_tid;
input f_dcd_ex7_frt_wen;
input [1:13] f_rnd_ex7_res_expo;
input [0:52] f_rnd_ex7_res_frac;
input f_rnd_ex7_res_sign;
//----------------------------------------------
input xu_fu_ex5_load_val;
input [0:7+threads] xu_fu_ex5_load_tag;
input [192:255] xu_fu_ex5_load_data;
input lq_gpr_rel_we;
input lq_gpr_rel_le;
input [0:7+threads] lq_gpr_rel_wa;
input [64:127] lq_gpr_rel_wd; // :out std_ulogic_vector((128-STQ_DATA_SIZE) to 127);
//----------------------------------------------
output [0:7] f_fpr_ex6_load_addr;
output f_fpr_ex6_load_v;
output [0:7] f_fpr_ex6_reload_addr;
output f_fpr_ex6_reload_v;
output f_fpr_ex1_s_sign;
output [1:11] f_fpr_ex1_s_expo;
output [0:52] f_fpr_ex1_s_frac;
output f_fpr_ex1_a_sign;
output [1:13] f_fpr_ex1_a_expo;
output [0:52] f_fpr_ex1_a_frac;
output f_fpr_ex1_c_sign;
output [1:13] f_fpr_ex1_c_expo;
output [0:52] f_fpr_ex1_c_frac;
output f_fpr_ex1_b_sign;
output [1:13] f_fpr_ex1_b_expo;
output [0:52] f_fpr_ex1_b_frac;
output f_fpr_ex8_frt_sign;
output [1:13] f_fpr_ex8_frt_expo;
output [0:52] f_fpr_ex8_frt_frac;
output f_fpr_ex9_frt_sign;
output [1:13] f_fpr_ex9_frt_expo;
output [0:52] f_fpr_ex9_frt_frac;
output f_fpr_ex6_load_sign;
output [3:13] f_fpr_ex6_load_expo;
output [0:52] f_fpr_ex6_load_frac;
output f_fpr_ex7_load_sign;
output [3:13] f_fpr_ex7_load_expo;
output [0:52] f_fpr_ex7_load_frac;
output f_fpr_ex8_load_sign;
output [3:13] f_fpr_ex8_load_expo;
output [0:52] f_fpr_ex8_load_frac;
output f_fpr_ex6_reload_sign;
output [3:13] f_fpr_ex6_reload_expo;
output [0:52] f_fpr_ex6_reload_frac;
output f_fpr_ex7_reload_sign;
output [3:13] f_fpr_ex7_reload_expo;
output [0:52] f_fpr_ex7_reload_frac;
output f_fpr_ex8_reload_sign;
output [3:13] f_fpr_ex8_reload_expo;
output [0:52] f_fpr_ex8_reload_frac;
output [0:1] f_fpr_ex2_s_expo_extra;
output [0:7] f_fpr_ex2_a_par;
output [0:7] f_fpr_ex2_b_par;
output [0:7] f_fpr_ex2_c_par;
output [0:7] f_fpr_ex2_s_par;
// This entity contains macros
// ####################### SIGNALS ####################### --
wire tilo;
wire tihi;
wire tiup;
wire tidn;
wire [0:3] pc_fu_inj_regfile_parity_int;
wire thold_0;
wire thold_0_b;
wire sg_0;
wire force_t;
wire ab_thold_0;
wire ab_thold_0_b;
wire ab_force;
wire time_sl_thold_0;
wire [0:1] load_tid_enc;
wire [0:7] load_addr;
wire load_wen;
wire [0:63] ex6_load_data_raw;
wire [0:31] ex6_load_sp_data_raw;
wire [0:65] ex6_load_data;
wire [0:65] ex6_load_data_byp;
wire [0:65] ex7_load_data_byp;
wire [0:65] ex8_load_data_byp;
wire [0:65] ex6_reload_data_byp;
wire [0:65] ex7_reload_data_byp;
wire [0:65] ex8_reload_data_byp;
wire ex5_load_val;
wire ex5_load_v;
wire [0:9] ex5_load_tag;
wire ex6_load_val;
wire [0:9] ex6_load_tag;
wire [0:1] reload_tid_enc;
wire [0:7] reload_addr;
wire reload_wen;
wire ex5_reload_val;
wire ex5_reload_v;
wire [0:9] ex5_reload_tag;
wire [0:63] ex6_reload_data_raw;
wire [0:31] ex6_reload_sp_data_raw;
wire [0:65] ex6_reload_data;
wire ex6_reload_val;
wire [0:9] ex6_reload_tag;
wire [0:3] perr_inject;
wire ex6_ld_perr_inj;
wire ex7_ld_perr_inj;
wire ex6_rld_perr_inj;
wire ex7_rld_perr_inj;
wire ex6_targ_perr_inj;
wire ex7_targ_perr_inj;
wire r0e_en_func;
wire r1e_en_func;
wire [0:73] load_data_f0;
wire [0:73] load_data_f1;
wire [0:7] load_data_parity;
wire [0:7] load_data_parity_inj;
wire load_sp;
wire load_int;
wire load_sign_ext;
wire load_int_1up;
wire load_dp_exp_zero;
wire load_sp_exp_zero;
wire load_sp_exp_ones;
wire [0:65] load_sp_data;
wire [0:65] load_dp_data;
wire [0:73] reload_data_f0;
wire [0:73] reload_data_f1;
wire [0:7] reload_data_parity;
wire [0:7] reload_data_parity_inj;
wire reload_sp;
wire reload_int;
wire reload_sign_ext;
wire reload_int_1up;
wire reload_dp_exp_zero;
wire reload_sp_exp_zero;
wire reload_sp_exp_ones;
wire [0:65] reload_sp_data;
wire [0:65] reload_dp_data;
wire [0:7] rf0_fra_addr;
wire [0:7] rf0_frb_addr;
wire [0:7] rf0_frc_addr;
wire [0:7] rf0_frs_addr;
wire [0:7] frt_addr;
wire frt_wen;
wire [0:63] frt_data;
wire [0:7] frt_data_parity;
wire [0:66] ex7_frt_data;
wire [0:66] ex8_frt_data;
wire [0:66] ex9_frt_data;
wire [0:131] ldwt_lat_si;
wire [0:131] ldwt_lat_so;
wire [0:131] reldwt_lat_si;
wire [0:131] reldwt_lat_so;
wire [0:133] tgwt_lat_si;
wire [0:133] tgwt_lat_so;
wire [0:77] rf1_fra;
wire [0:77] rf1_frb;
wire [0:77] rf1_frc;
wire [0:77] rf1_frs;
wire [0:9] abist_raddr_0;
wire [0:9] abist_raddr_1;
wire [0:9] abist_waddr_0;
wire [0:9] abist_waddr_1;
wire [0:52] ab_reg_si;
wire [0:52] ab_reg_so;
wire abist_comp_en; // when abist tested
wire r0e_abist_comp_en; // when abist tested
wire r1e_abist_comp_en; // when abist tested
wire lcb_act_dis_dc;
wire [0:1] lcb_clkoff_dc_b;
wire lcb_d_mode_dc;
wire [0:4] lcb_delay_lclkr_dc; //<lclk delay>
wire fce_0;
wire [0:6] lcb_mpw1_dc_b; // <clock shapg>
wire lcb_mpw2_dc_b;
wire lcb_sg_0;
wire lcb_abst_sl_thold_0;
wire ary_nsl_thold_0;
wire clkoff_dc_b;
wire d_mode_dc;
wire scan_in_0;
wire scan_out_0;
wire scan_in_1;
wire scan_out_1;
wire r0e_en_abist;
wire [0:7] r0e_addr_abist;
wire r1e_en_abist;
wire [0:7] r1e_addr_abist;
wire w0e_act;
wire w0e_en_func;
wire w0e_en_abist;
wire [0:7] w0e_addr_func;
wire [0:7] w0e_addr_abist;
wire [0:77] w0e_data_func_f0;
wire [0:77] w0e_data_func_f1;
wire [0:77] rel_data_func_f0;
wire [0:77] rel_data_func_f1;
wire [0:3] w0e_data_abist;
wire w0l_act;
wire w0l_en_func;
wire w0l_en_abist;
wire [0:7] w0l_addr_func;
wire [0:7] w0l_addr_abist;
wire [0:77] w0l_data_func_f0;
wire [0:77] w0l_data_func_f1;
wire [0:3] w0l_data_abist;
wire [0:77] fra_data_out;
wire [0:77] frb_data_out;
wire [0:77] frc_data_out;
wire [0:77] frs_data_out;
wire [0:7] ex1_fra_par;
wire [0:7] ex1_frb_par;
wire [0:7] ex1_frc_par;
wire [0:7] ex1_frs_par;
wire [0:1] ex1_s_expo_extra;
wire [0:63] ex7_ldat_si;
wire [0:63] ex7_ldat_so;
wire [0:63] ex7_rldat_si;
wire [0:63] ex7_rldat_so;
wire [0:11] ex7_lctl_si;
wire [0:11] ex7_lctl_so;
wire [0:9] ex7_rlctl_si;
wire [0:9] ex7_rlctl_so;
wire [0:1] ex7_ldv_si;
wire [0:1] ex7_ldv_so;
wire [0:4] ex6_lctl_si;
wire [0:4] ex6_lctl_so;
wire [0:33] ex1_par_si;
wire [0:33] ex1_par_so;
wire ld_par3239;
wire ld_par3239_inj;
wire ld_par4047;
wire ld_par4855;
wire ld_par5663;
wire ld_par6163;
wire ld_par6163_inj;
wire ld_par0007;
wire ld_par0815;
wire ld_par1623;
wire ld_par2431;
wire ld_par32_3436;
wire ld_par3744;
wire ld_par4552;
wire ld_par5360;
wire load_dp_nint;
wire load_dp_int;
wire load_sp_all1;
wire load_sp_nall1;
wire rld_par3239;
wire rld_par3239_inj;
wire rld_par4047;
wire rld_par4855;
wire rld_par5663;
wire rld_par6163;
wire rld_par6163_inj;
wire rld_par0007;
wire rld_par0815;
wire rld_par1623;
wire rld_par2431;
wire rld_par32_3436;
wire rld_par3744;
wire rld_par4552;
wire rld_par5360;
wire reload_dp_nint;
wire reload_dp_int;
wire reload_sp_all1;
wire reload_sp_nall1;
wire [0:77] zeros;
wire [1:25] spare_unused;
//----------------------------------------------------------------------
// Pervasive
tri_plat thold_reg_0(
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.flush(flush),
.din(thold_1),
.q(thold_0)
);
tri_plat sg_reg_0(
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.flush(flush),
.din(sg_1),
.q(sg_0)
);
tri_lcbor lcbor_0(
.clkoff_b(clkoff_b),
.thold(thold_0),
.sg(sg_0),
.act_dis(act_dis),
.force_t(force_t),
.thold_b(thold_0_b)
);
tri_plat #(.WIDTH(4)) ab_thold_reg_0(
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.flush(flush),
.din({abst_sl_thold_1,
time_sl_thold_1,
ary_nsl_thold_1,
fce_1}),
.q({ ab_thold_0,
time_sl_thold_0,
ary_nsl_thold_0,
fce_0})
);
tri_lcbor ab_lcbor_0(
.clkoff_b(clkoff_b),
.thold(ab_thold_0),
.sg(sg_0),
.act_dis(act_dis),
.force_t(ab_force),
.thold_b(ab_thold_0_b)
);
//----------------------------------------------------------------------
// Act Latches
assign tilo = 1'b0;
assign tihi = 1'b1;
assign zeros = {78{tilo}};
assign tiup = 1'b1;
assign tidn = 1'b1;
//----------------------------------------------------------------------
// Load Data
generate
if (threads == 1)
begin : fpr_inj_perr_thr1_1
assign pc_fu_inj_regfile_parity_int[0:3] = {pc_fu_inj_regfile_parity[0], tidn, tidn, tidn};
end
endgenerate
generate
if (threads == 2)
begin : fpr_inj_perr_thr2_2
assign pc_fu_inj_regfile_parity_int[0:3] = {pc_fu_inj_regfile_parity[0], pc_fu_inj_regfile_parity[1], tidn, tidn};
end
endgenerate
tri_rlmreg_p #(.INIT(0), .WIDTH(5)) ex6_lctl(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[6]),
.mpw1_b(mpw1_bb[6]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex6_lctl_si[0:4]),
.scout(ex6_lctl_so[0:4]),
.din({ pc_fu_inj_regfile_parity_int[0:3],
ex6_targ_perr_inj}),
.dout({ perr_inject[0:3],
ex7_targ_perr_inj})
);
assign ex5_load_val = xu_fu_ex5_load_val;
assign ex5_load_v = ex5_load_val;
generate
if (threads == 1)
begin : dcd_loadtag_thr1_1
assign ex5_load_tag[0:9] = {xu_fu_ex5_load_tag[0:2], 1'b0, xu_fu_ex5_load_tag[3:8]};
end
endgenerate
generate
if (threads == 2)
begin : dcd_loadtag_thr2_1
assign ex5_load_tag[0:9] = xu_fu_ex5_load_tag[0:9];
end
endgenerate
assign ex5_reload_val = lq_gpr_rel_we;
assign ex5_reload_v = ex5_reload_val;
generate
if (threads == 1)
begin : dcd_reloadtag_thr1_1
assign ex5_reload_tag[0:9] = {lq_gpr_rel_wa[0:2], 1'b0, lq_gpr_rel_wa[3:8]};
end
endgenerate
generate
if (threads == 2)
begin : dcd_reloadtag_thr2_1
assign ex5_reload_tag[0:9] = lq_gpr_rel_wa[0:9];
end
endgenerate
assign ex6_ld_perr_inj = ((ex6_load_val) & (~ex6_load_tag[3]) & perr_inject[0]) |
((ex6_load_val) & ( ex6_load_tag[3]) & perr_inject[1]);
assign ex6_rld_perr_inj = ((ex6_reload_val) & (~ex6_reload_tag[3]) & perr_inject[0]) |
((ex6_reload_val) & ( ex6_reload_tag[3]) & perr_inject[1]);
assign ex6_targ_perr_inj = (f_dcd_ex6_frt_tid[0] & perr_inject[0]) |
(f_dcd_ex6_frt_tid[1] & perr_inject[1]);
tri_rlmreg_p #(.INIT(0), .WIDTH(2)) ex6_ldv(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[6]),
.mpw1_b(mpw1_bb[6]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex7_ldv_si[0:1]),
.scout(ex7_ldv_so[0:1]),
.din({ex5_load_val,
ex5_reload_val}),
.dout({ex6_load_val,
ex6_reload_val})
);
tri_rlmreg_p #(.INIT(0), .WIDTH(12)) ex7_lctl(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[6]), //todo separate these out into ex6 and ex7?
.mpw1_b(mpw1_bb[6]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex7_lctl_si[0:11]),
.scout(ex7_lctl_so[0:11]),
.din({ex5_load_tag[0:9],
ex6_ld_perr_inj,
ex6_rld_perr_inj}),
.dout({ex6_load_tag[0:9],
ex7_ld_perr_inj,
ex7_rld_perr_inj})
);
tri_rlmreg_p #(.INIT(0), .WIDTH(10)) ex7_rlctl(
.nclk(nclk),
.act(ex5_reload_v),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[6]),
.mpw1_b(mpw1_bb[6]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex7_rlctl_si[0:9]),
.scout(ex7_rlctl_so[0:9]),
.din(ex5_reload_tag[0:9]),
.dout(ex6_reload_tag[0:9])
);
tri_rlmreg_p #(.INIT(0), .WIDTH(64), .NEEDS_SRESET(0)) ex7_ldat(
.nclk(nclk),
.act(ex5_load_v),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[7]),
.mpw1_b(mpw1_bb[7]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex7_ldat_si[0:63]),
.scout(ex7_ldat_so[0:63]),
.din(xu_fu_ex5_load_data[192:255]),
.dout(ex6_load_data_raw[0:63])
);
tri_rlmreg_p #(.INIT(0), .WIDTH(64), .NEEDS_SRESET(0)) ex7_rldat(
.nclk(nclk),
.act(ex5_reload_v),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[7]),
.mpw1_b(mpw1_bb[7]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex7_rldat_si[0:63]),
.scout(ex7_rldat_so[0:63]),
.din(lq_gpr_rel_wd[64:127]),
.dout(ex6_reload_data_raw[0:63])
);
assign load_tid_enc[0] = tilo;
assign load_tid_enc[1] = tilo;
assign load_addr[1:7] = ex6_load_tag[3:9];
assign load_sp = ex6_load_tag[0]; // bit 0 of the tag indicates that the instr was an lfs*
assign load_int = ex6_load_tag[1]; // bit 1 is lfi*
assign load_sign_ext = ex6_load_tag[2]; // bit 1 is lfiwax
assign load_wen = ex6_load_val;
assign reload_tid_enc[0] = tilo;
assign reload_tid_enc[1] = tilo;
assign reload_addr[0:7] = {1'b0, ex6_reload_tag[3:9]};
assign reload_sp = ex6_reload_tag[0]; // bit 0 of the tag indicates that the instr was an lfs*
assign reload_int = ex6_reload_tag[1]; // bit 1 is lfi*
assign reload_sign_ext = ex6_reload_tag[2]; // bit 1 is lfiwax
assign reload_wen = ex6_reload_val;
// FPU LOADS
//
// Double precision (DP) loads are straight forward.
// To get rid of the mathematical discontinuity in the ieee number system,
// We add the implicit bit and change the zero exponent from x000 to x001.
// This needs to be undone when data is stored.
//
// the spec says that Single Precision loads (SP) should be fully normalized
// and converted to double format before storing.
// there is not time to do that, so we take a short cut and deal with the problems
// when the operand is used.
// The Double precision exponent bias is 1023.
// The Single precision exponent bias is 127.
// The difference x380 is added to convert the exponent.
// (actually no adder is needed)
// x380 => "0_0011_1000_0000
// SP Dddd_dddd
// if D=0 0_0011_1ddd_dddd --> {D, !D, !D, !D}
// if D=1 0_0100_0ddd_dddd --> {D, !D, !D, !D}
//
// also for SP -> SP_infinity is converted to DP infinity
// -> (0) is converted to x381 (instead of x380) and the implicit bit is added.
// so .... there are now 2 numbers that mean zero
// 1) (exp==x001) and (IMP_bit==0) and (FRAC==0)
// 2) (exp==x381) and (IMP_bit==0) and (FRAC==0)
// the only time the SP load needs correcting (prenormalization) is
// (exp==x381) and (IMP_bit==0) and (FRAC==0) <== SP denorm can be converted to DP norm.
//
//------------------------------------------------------------------------------------------------
// INPUT LOAD DATA FORMAT LdDin[0:63] :
//
// lfd lfs
// [00:00] sign [00:00] sign
// [01:11] exponent [01:08] exponent
// [12:63] fraction [09:31] fraction
// -----------------------------------------------------------------------------------------------
// OUTPUT LOAD DATA FORMAT ... add implicit bit
//
// DP | SP
// ---------------------------------------------|-------------------------------------------------
// [00:00] Din[00] | Din[00] <--- Sgn
// [01:01] Din[01] | Din[01] <--- exp[00] //03
// [02:02] Din[02] | ~Din[01] | (Din[01:08]="11111111") <--- exp[01] //04
// [03:03] Din[03] | ~Din[01] | (Din[01:08]="11111111") <--- exp[02] //05
// [04:04] Din[04] | ~Din[01] | (Din[01:08]="11111111") <--- exp[03] //06
// [05:10] Din[05:10] | Din[02:07] <--- exp[04:09] //07:12
// [11:11] Din[11] | (Din[01:11]="00000000000") | Din[08] | (Din[01:08]="00000000") <--- exp[10] //13
// [12:12] ~(Din[01:11]="00000000000") | ~(Din[01:08]="00000000") <--- frac[00] //imlicit bit
// [13:35] Din[12:34] | Din[09:31] <--- frac[01:23]
// [36:64] Din[35:63] | (0:28=>'0') <--- frac[24:52]
// ---------------------------------------------|-------------------------------------------------
//------------------------------------------------------------------------------
// LOAD FPU/FPR data format
//
// Double-precision load: lfd*
//
// Value Loaded Internal Representation [sign exponent imp fraction] Format name
// ------------ ---------------------------------------------------- -----------
// 0 x 00000000001 0 0000... Zero
// Denormal x 00000000001 0 xxxx... Denormal
// Normal x xxxxxxxxxxx 1 xxxx... Normal
// Inf x 11111111111 1 0000... Inf
// NaN x 11111111111 1 qxxx... NaN
//
// Single-precision denormal form (SP_DENORM)
// exp = 0x381, imp = 0, frac != 0 (frac == 0: SP_DENORM0)
//
// Single-precision load: lfs*
//
// Value Loaded Internal Representation [sign exponent imp fraction] Format name
// ------------ ---------------------------------------------------- -----------
// 0 x 01110000001 0 000000000000000000000000000... SP_DENORM0
// Denormal x 01110000001 0 xxxxxxxxxxxxxxxxxxxxxxx0000... SP_DENORM
// Normal x xXXXxxxxxxx 1 xxxxxxxxxxxxxxxxxxxxxxx0000... Normal
// Inf x 11111111111 1 000000000000000000000000000... Inf
// NaN x 11111111111 1 qxxxxxxxxxxxxxxxxxxxxxx0000... NaN
//------------------------------------------------------------------------------
// Convert Incoming SP loads to DP format
// DP bias = 1023
// SP bias = 127
// diff = x380 => 0_0011_1000_0000
// SP Dddd_dddd
// if D=0, 0_0011_1ddd_dddd -> {D,!D,!D,!D}
// if D=1, 0_0100_0ddd_dddd -> {D,!D,!D,!D}
// For lfiwax and lfiwzx, either set upper (32) to zeros or ones
assign load_int_1up = load_int & load_sign_ext & load_sp_data[0];
assign reload_int_1up = reload_int & reload_sign_ext & reload_sp_data[0];
// Due to the XU rotator, all SP loads (words) are aligned to the right
assign ex6_load_sp_data_raw[0:31] = ex6_load_data_raw[32:63];
assign ex6_reload_sp_data_raw[0:31] = ex6_reload_data_raw[32:63];
assign load_dp_exp_zero = ex6_load_data_raw[1:11] == 11'b00000000000;
assign load_sp_exp_zero = ex6_load_sp_data_raw[1:8] == 8'b00000000;
assign load_sp_exp_ones = ex6_load_sp_data_raw[1:8] == 8'b11111111;
assign load_sp_data[0] = ex6_load_sp_data_raw[0]; // sign
assign load_sp_data[1] = tilo; // exp02
assign load_sp_data[2] = ex6_load_sp_data_raw[1]; // exp03
assign load_sp_data[3] = (~ex6_load_sp_data_raw[1]) | load_sp_exp_ones; // exp04
assign load_sp_data[4] = (~ex6_load_sp_data_raw[1]) | load_sp_exp_ones; // exp05
assign load_sp_data[5] = (~ex6_load_sp_data_raw[1]) | load_sp_exp_ones; // exp06
assign load_sp_data[6:11] = ex6_load_sp_data_raw[2:7]; // exp07-12
assign load_sp_data[12] = ex6_load_sp_data_raw[8] | load_sp_exp_zero; // exp13
assign load_sp_data[13] = (~load_sp_exp_zero); // implicit
assign load_sp_data[14:36] = ex6_load_sp_data_raw[9:31]; // frac01:23
assign load_sp_data[37:65] = {29{tilo}}; // frac24:52
assign load_dp_data[0] = (ex6_load_data_raw[0] & (~load_int)) | load_int_1up; // sign
assign load_dp_data[1] = tilo; // exp02
assign load_dp_data[2:11] = (ex6_load_data_raw[1:10] & {10{(~load_int)}}) | {10{load_int_1up}}; // exp03-12
assign load_dp_data[12] = (ex6_load_data_raw[11] | load_dp_exp_zero) | load_int | load_int_1up; // exp13
assign load_dp_data[13] = ((~load_dp_exp_zero) & (~load_int)) | load_int_1up; // implicit
assign load_dp_data[14:33] = (ex6_load_data_raw[12:31] & {20{(~load_int)}}) | {20{load_int_1up}}; // fraction
assign load_dp_data[34:65] = ex6_load_data_raw[32:63]; // fraction
assign ex6_load_data[0:65] = (load_dp_data[0:65] & {66{(~load_sp)}}) | (load_sp_data[0:65] & {66{load_sp}});
assign load_data_f0[0:73] = {ex6_load_data[0:65], load_data_parity[0:7]};
assign load_data_f1[0:73] = {ex6_load_data[0:65], load_data_parity_inj[0:7]};
assign reload_dp_exp_zero = ex6_reload_data_raw[1:11] == 11'b00000000000;
assign reload_sp_exp_zero = ex6_reload_sp_data_raw[1:8] == 8'b00000000;
assign reload_sp_exp_ones = ex6_reload_sp_data_raw[1:8] == 8'b11111111;
assign reload_sp_data[0] = ex6_reload_sp_data_raw[0]; // sign
assign reload_sp_data[1] = tilo; // exp02
assign reload_sp_data[2] = ex6_reload_sp_data_raw[1]; // exp03
assign reload_sp_data[3] = (~ex6_reload_sp_data_raw[1]) | reload_sp_exp_ones; // exp04
assign reload_sp_data[4] = (~ex6_reload_sp_data_raw[1]) | reload_sp_exp_ones; // exp05
assign reload_sp_data[5] = (~ex6_reload_sp_data_raw[1]) | reload_sp_exp_ones; // exp06
assign reload_sp_data[6:11] = ex6_reload_sp_data_raw[2:7]; // exp07-12
assign reload_sp_data[12] = ex6_reload_sp_data_raw[8] | reload_sp_exp_zero; // exp13
assign reload_sp_data[13] = (~reload_sp_exp_zero); // implicit
assign reload_sp_data[14:36] = ex6_reload_sp_data_raw[9:31]; // frac01:23
assign reload_sp_data[37:65] = {29{tilo}}; // frac24:52
assign reload_dp_data[0] = (ex6_reload_data_raw[0] & (~reload_int)) | reload_int_1up; // sign
assign reload_dp_data[1] = tilo; // exp02
assign reload_dp_data[2:11] = (ex6_reload_data_raw[1:10] & {10{(~reload_int)}}) | {10{reload_int_1up}}; // exp03-12
assign reload_dp_data[12] = (ex6_reload_data_raw[11] | reload_dp_exp_zero) | reload_int | reload_int_1up; // exp13
assign reload_dp_data[13] = ((~reload_dp_exp_zero) & (~reload_int)) | reload_int_1up; // implicit
assign reload_dp_data[14:33] = (ex6_reload_data_raw[12:31] & {20{(~reload_int)}}) | {20{reload_int_1up}}; // fraction
assign reload_dp_data[34:65] = ex6_reload_data_raw[32:63]; // fraction
assign ex6_reload_data[0:65] = (reload_dp_data[0:65] & {66{(~reload_sp)}}) | (reload_sp_data[0:65] & {66{reload_sp}});
assign reload_data_f0[0:73] = {ex6_reload_data[0:65], reload_data_parity[0:7]};
assign reload_data_f1[0:73] = {ex6_reload_data[0:65], reload_data_parity_inj[0:7]};
assign ld_par0007 = ex6_load_data_raw[0] ^ ex6_load_data_raw[1] ^ ex6_load_data_raw[2] ^ ex6_load_data_raw[3] ^ ex6_load_data_raw[4] ^ ex6_load_data_raw[5] ^ ex6_load_data_raw[6] ^ ex6_load_data_raw[7];
assign ld_par32_3436 = ex6_load_data_raw[32] ^ ex6_load_data_raw[34] ^ ex6_load_data_raw[35] ^ ex6_load_data_raw[36];
assign ld_par0815 = ex6_load_data_raw[8] ^ ex6_load_data_raw[9] ^ ex6_load_data_raw[10] ^ ex6_load_data_raw[11] ^ ex6_load_data_raw[12] ^ ex6_load_data_raw[13] ^ ex6_load_data_raw[14] ^ ex6_load_data_raw[15];
assign ld_par3744 = ex6_load_data_raw[37] ^ ex6_load_data_raw[38] ^ ex6_load_data_raw[39] ^ ex6_load_data_raw[40] ^ ex6_load_data_raw[41] ^ ex6_load_data_raw[42] ^ ex6_load_data_raw[43] ^ ex6_load_data_raw[44];
assign ld_par1623 = ex6_load_data_raw[16] ^ ex6_load_data_raw[17] ^ ex6_load_data_raw[18] ^ ex6_load_data_raw[19] ^ ex6_load_data_raw[20] ^ ex6_load_data_raw[21] ^ ex6_load_data_raw[22] ^ ex6_load_data_raw[23];
assign ld_par4552 = ex6_load_data_raw[45] ^ ex6_load_data_raw[46] ^ ex6_load_data_raw[47] ^ ex6_load_data_raw[48] ^ ex6_load_data_raw[49] ^ ex6_load_data_raw[50] ^ ex6_load_data_raw[51] ^ ex6_load_data_raw[52];
assign ld_par2431 = ex6_load_data_raw[24] ^ ex6_load_data_raw[25] ^ ex6_load_data_raw[26] ^ ex6_load_data_raw[27] ^ ex6_load_data_raw[28] ^ ex6_load_data_raw[29] ^ ex6_load_data_raw[30] ^ ex6_load_data_raw[31];
assign ld_par5360 = ex6_load_data_raw[53] ^ ex6_load_data_raw[54] ^ ex6_load_data_raw[55] ^ ex6_load_data_raw[56] ^ ex6_load_data_raw[57] ^ ex6_load_data_raw[58] ^ ex6_load_data_raw[59] ^ ex6_load_data_raw[60];
assign ld_par3239 = ex6_load_data_raw[32] ^ ex6_load_data_raw[33] ^ ex6_load_data_raw[34] ^ ex6_load_data_raw[35] ^ ex6_load_data_raw[36] ^ ex6_load_data_raw[37] ^ ex6_load_data_raw[38] ^ ex6_load_data_raw[39];
assign ld_par4047 = ex6_load_data_raw[40] ^ ex6_load_data_raw[41] ^ ex6_load_data_raw[42] ^ ex6_load_data_raw[43] ^ ex6_load_data_raw[44] ^ ex6_load_data_raw[45] ^ ex6_load_data_raw[46] ^ ex6_load_data_raw[47];
assign ld_par4855 = ex6_load_data_raw[48] ^ ex6_load_data_raw[49] ^ ex6_load_data_raw[50] ^ ex6_load_data_raw[51] ^ ex6_load_data_raw[52] ^ ex6_load_data_raw[53] ^ ex6_load_data_raw[54] ^ ex6_load_data_raw[55];
assign ld_par5663 = ex6_load_data_raw[56] ^ ex6_load_data_raw[57] ^ ex6_load_data_raw[58] ^ ex6_load_data_raw[59] ^ ex6_load_data_raw[60] ^ ex6_load_data_raw[61] ^ ex6_load_data_raw[62] ^ ex6_load_data_raw[63];
assign ld_par3239_inj = ex6_load_data_raw[32] ^ ex6_load_data_raw[33] ^ ex6_load_data_raw[34] ^ ex6_load_data_raw[35] ^ ex6_load_data_raw[36] ^ ex6_load_data_raw[37] ^ ex6_load_data_raw[38] ^ ex6_load_data_raw[39] ^ ex7_ld_perr_inj;
assign ld_par6163 = ex6_load_data_raw[61] ^ ex6_load_data_raw[62] ^ ex6_load_data_raw[63];
assign ld_par6163_inj = ex6_load_data_raw[61] ^ ex6_load_data_raw[62] ^ ex6_load_data_raw[63] ^ ex7_ld_perr_inj;
//ld_pgen_premux
assign load_dp_nint = (~load_sp) & (~load_int);
assign load_dp_int = (~load_sp) & load_int;
assign load_sp_all1 = load_sp & load_sp_exp_ones;
assign load_sp_nall1 = load_sp & (~load_sp_exp_ones);
assign load_data_parity[0] = (ld_par0007 & load_dp_nint) | (ld_par32_3436 & load_sp_all1) | ((~ld_par32_3436) & load_sp_nall1);
assign load_data_parity[1] = ((~ld_par0815) & load_dp_nint) | ((~ld_par3744) & load_sp) | load_dp_int;
assign load_data_parity[2] = (ld_par1623 & load_dp_nint) | (ld_par4552 & load_sp);
assign load_data_parity[3] = (ld_par2431 & load_dp_nint) | (ld_par5360 & load_sp);
assign load_data_parity[4] = (ld_par3239 & (~load_sp)) | (ld_par6163 & load_sp);
assign load_data_parity[5] = (ld_par4047 & (~load_sp));
assign load_data_parity[6] = (ld_par4855 & (~load_sp));
assign load_data_parity[7] = (ld_par5663 & (~load_sp));
assign load_data_parity_inj[0] = (ld_par0007 & load_dp_nint) | (ld_par32_3436 & load_sp_all1) | ((~ld_par32_3436) & load_sp_nall1);
assign load_data_parity_inj[1] = ((~ld_par0815) & load_dp_nint) | ((~ld_par3744) & load_sp) | load_dp_int;
assign load_data_parity_inj[2] = (ld_par1623 & load_dp_nint) | (ld_par4552 & load_sp);
assign load_data_parity_inj[3] = (ld_par2431 & load_dp_nint) | (ld_par5360 & load_sp);
assign load_data_parity_inj[4] = (ld_par3239_inj & (~load_sp)) | (ld_par6163_inj & load_sp);
assign load_data_parity_inj[5] = (ld_par4047 & (~load_sp));
assign load_data_parity_inj[6] = (ld_par4855 & (~load_sp));
assign load_data_parity_inj[7] = (ld_par5663 & (~load_sp));
assign rld_par0007 = ex6_reload_data_raw[0] ^ ex6_reload_data_raw[1] ^ ex6_reload_data_raw[2] ^ ex6_reload_data_raw[3] ^ ex6_reload_data_raw[4] ^ ex6_reload_data_raw[5] ^ ex6_reload_data_raw[6] ^ ex6_reload_data_raw[7]; //rld_pgen_premux--
assign rld_par32_3436 = ex6_reload_data_raw[32] ^ ex6_reload_data_raw[34] ^ ex6_reload_data_raw[35] ^ ex6_reload_data_raw[36]; //rld_pgen_premux--
assign rld_par0815 = ex6_reload_data_raw[8] ^ ex6_reload_data_raw[9] ^ ex6_reload_data_raw[10] ^ ex6_reload_data_raw[11] ^ ex6_reload_data_raw[12] ^ ex6_reload_data_raw[13] ^ ex6_reload_data_raw[14] ^ ex6_reload_data_raw[15]; //rld_pgen_premux--
assign rld_par3744 = ex6_reload_data_raw[37] ^ ex6_reload_data_raw[38] ^ ex6_reload_data_raw[39] ^ ex6_reload_data_raw[40] ^ ex6_reload_data_raw[41] ^ ex6_reload_data_raw[42] ^ ex6_reload_data_raw[43] ^ ex6_reload_data_raw[44]; //rld_pgen_premux--
assign rld_par1623 = ex6_reload_data_raw[16] ^ ex6_reload_data_raw[17] ^ ex6_reload_data_raw[18] ^ ex6_reload_data_raw[19] ^ ex6_reload_data_raw[20] ^ ex6_reload_data_raw[21] ^ ex6_reload_data_raw[22] ^ ex6_reload_data_raw[23]; //rld_pgen_premux--
assign rld_par4552 = ex6_reload_data_raw[45] ^ ex6_reload_data_raw[46] ^ ex6_reload_data_raw[47] ^ ex6_reload_data_raw[48] ^ ex6_reload_data_raw[49] ^ ex6_reload_data_raw[50] ^ ex6_reload_data_raw[51] ^ ex6_reload_data_raw[52]; //rld_pgen_premux--
assign rld_par2431 = ex6_reload_data_raw[24] ^ ex6_reload_data_raw[25] ^ ex6_reload_data_raw[26] ^ ex6_reload_data_raw[27] ^ ex6_reload_data_raw[28] ^ ex6_reload_data_raw[29] ^ ex6_reload_data_raw[30] ^ ex6_reload_data_raw[31]; //rld_pgen_premux--
assign rld_par5360 = ex6_reload_data_raw[53] ^ ex6_reload_data_raw[54] ^ ex6_reload_data_raw[55] ^ ex6_reload_data_raw[56] ^ ex6_reload_data_raw[57] ^ ex6_reload_data_raw[58] ^ ex6_reload_data_raw[59] ^ ex6_reload_data_raw[60]; //rld_pgen_premux--
assign rld_par3239 = ex6_reload_data_raw[32] ^ ex6_reload_data_raw[33] ^ ex6_reload_data_raw[34] ^ ex6_reload_data_raw[35] ^ ex6_reload_data_raw[36] ^ ex6_reload_data_raw[37] ^ ex6_reload_data_raw[38] ^ ex6_reload_data_raw[39]; //rld_pgen_premux--
assign rld_par4047 = ex6_reload_data_raw[40] ^ ex6_reload_data_raw[41] ^ ex6_reload_data_raw[42] ^ ex6_reload_data_raw[43] ^ ex6_reload_data_raw[44] ^ ex6_reload_data_raw[45] ^ ex6_reload_data_raw[46] ^ ex6_reload_data_raw[47]; //rld_pgen_premux--
assign rld_par4855 = ex6_reload_data_raw[48] ^ ex6_reload_data_raw[49] ^ ex6_reload_data_raw[50] ^ ex6_reload_data_raw[51] ^ ex6_reload_data_raw[52] ^ ex6_reload_data_raw[53] ^ ex6_reload_data_raw[54] ^ ex6_reload_data_raw[55]; //rld_pgen_premux--
assign rld_par5663 = ex6_reload_data_raw[56] ^ ex6_reload_data_raw[57] ^ ex6_reload_data_raw[58] ^ ex6_reload_data_raw[59] ^ ex6_reload_data_raw[60] ^ ex6_reload_data_raw[61] ^ ex6_reload_data_raw[62] ^ ex6_reload_data_raw[63]; //rld_pgen_premux--
assign rld_par6163 = ex6_reload_data_raw[61] ^ ex6_reload_data_raw[62] ^ ex6_reload_data_raw[63]; //rld_pgen_premux--
assign rld_par3239_inj = ex6_reload_data_raw[32] ^ ex6_reload_data_raw[33] ^ ex6_reload_data_raw[34] ^ ex6_reload_data_raw[35] ^ ex6_reload_data_raw[36] ^ ex6_reload_data_raw[37] ^ ex6_reload_data_raw[38] ^ ex6_reload_data_raw[39] ^ ex7_rld_perr_inj; //rld_pgen_premux--
assign rld_par6163_inj = ex6_reload_data_raw[61] ^ ex6_reload_data_raw[62] ^ ex6_reload_data_raw[63] ^ ex7_rld_perr_inj; //rld_pgen_premux--
assign reload_dp_nint = (~reload_sp) & (~reload_int); //rld_pgen_premux--
assign reload_dp_int = (~reload_sp) & reload_int; //rld_pgen_premux--
assign reload_sp_all1 = reload_sp & reload_sp_exp_ones; //rld_pgen_premux--
assign reload_sp_nall1 = reload_sp & (~reload_sp_exp_ones); //rld_pgen_premux--
assign reload_data_parity[0] = (rld_par0007 & reload_dp_nint) | (rld_par32_3436 & reload_sp_all1) | ((~rld_par32_3436) & reload_sp_nall1); //rld_pgen_premux--
assign reload_data_parity[1] = ((~rld_par0815) & reload_dp_nint) | ((~rld_par3744) & reload_sp) | reload_dp_int; //rld_pgen_premux--
assign reload_data_parity[2] = (rld_par1623 & reload_dp_nint) | (rld_par4552 & reload_sp); //rld_pgen_premux--
assign reload_data_parity[3] = (rld_par2431 & reload_dp_nint) | (rld_par5360 & reload_sp); //rld_pgen_premux--
assign reload_data_parity[4] = (rld_par3239 & (~reload_sp)) | (rld_par6163 & reload_sp); //rld_pgen_premux--
assign reload_data_parity[5] = (rld_par4047 & (~reload_sp)); //rld_pgen_premux--
assign reload_data_parity[6] = (rld_par4855 & (~reload_sp)); //rld_pgen_premux--
assign reload_data_parity[7] = (rld_par5663 & (~reload_sp)); //rld_pgen_premux--
assign reload_data_parity_inj[0] = (rld_par0007 & reload_dp_nint) | (rld_par32_3436 & reload_sp_all1) | ((~rld_par32_3436) & reload_sp_nall1); //rld_pgen_premux--
assign reload_data_parity_inj[1] = ((~rld_par0815) & reload_dp_nint) | ((~rld_par3744) & reload_sp) | reload_dp_int; //rld_pgen_premux--
assign reload_data_parity_inj[2] = (rld_par1623 & reload_dp_nint) | (rld_par4552 & reload_sp); //rld_pgen_premux--
assign reload_data_parity_inj[3] = (rld_par2431 & reload_dp_nint) | (rld_par5360 & reload_sp); //rld_pgen_premux--
assign reload_data_parity_inj[4] = (rld_par3239_inj & (~reload_sp)) | (rld_par6163_inj & reload_sp); //rld_pgen_premux--
assign reload_data_parity_inj[5] = (rld_par4047 & (~reload_sp)); //rld_pgen_premux--
assign reload_data_parity_inj[6] = (rld_par4855 & (~reload_sp)); //rld_pgen_premux--
assign reload_data_parity_inj[7] = (rld_par5663 & (~reload_sp)); //rld_pgen_premux--
//verity_out(0 to 73) <= load_data(0 to 73) ; --VERTIY--
//----------------------------------------------------------------------
// Target Data
generate
if (threads == 1)
begin : frt_addr_thr_1
assign frt_addr[1:7] = {1'b0, f_dcd_ex7_frt_addr[0:5]};
assign spare_unused[1] = f_dcd_ex7_frt_tid[1];
end
endgenerate
generate
if (threads == 2)
begin : frt_addr_thr_2
assign frt_addr[1:7] = {f_dcd_ex7_frt_addr[0:5], f_dcd_ex7_frt_tid[1]};
assign spare_unused[1] = tidn;
end
endgenerate
assign frt_wen = f_dcd_ex7_frt_wen;
assign frt_data[0:63] = {f_rnd_ex7_res_sign, f_rnd_ex7_res_expo[3:13], f_rnd_ex7_res_frac[1:52]};
assign frt_data_parity[0] = f_rnd_ex7_res_sign ^ f_rnd_ex7_res_expo[1] ^ f_rnd_ex7_res_expo[2] ^ f_rnd_ex7_res_expo[3] ^ f_rnd_ex7_res_expo[4] ^ f_rnd_ex7_res_expo[5] ^ f_rnd_ex7_res_expo[6] ^ f_rnd_ex7_res_expo[7] ^ f_rnd_ex7_res_expo[8] ^ f_rnd_ex7_res_expo[9];
assign frt_data_parity[1] = f_rnd_ex7_res_expo[10] ^ f_rnd_ex7_res_expo[11] ^ f_rnd_ex7_res_expo[12] ^ f_rnd_ex7_res_expo[13] ^ f_rnd_ex7_res_frac[0] ^ f_rnd_ex7_res_frac[1] ^ f_rnd_ex7_res_frac[2] ^ f_rnd_ex7_res_frac[3] ^ f_rnd_ex7_res_frac[4];
assign frt_data_parity[2] = f_rnd_ex7_res_frac[5] ^ f_rnd_ex7_res_frac[6] ^ f_rnd_ex7_res_frac[7] ^ f_rnd_ex7_res_frac[8] ^ f_rnd_ex7_res_frac[9] ^ f_rnd_ex7_res_frac[10] ^ f_rnd_ex7_res_frac[11] ^ f_rnd_ex7_res_frac[12];
assign frt_data_parity[3] = f_rnd_ex7_res_frac[13] ^ f_rnd_ex7_res_frac[14] ^ f_rnd_ex7_res_frac[15] ^ f_rnd_ex7_res_frac[16] ^ f_rnd_ex7_res_frac[17] ^ f_rnd_ex7_res_frac[18] ^ f_rnd_ex7_res_frac[19] ^ f_rnd_ex7_res_frac[20];
assign frt_data_parity[4] = f_rnd_ex7_res_frac[21] ^ f_rnd_ex7_res_frac[22] ^ f_rnd_ex7_res_frac[23] ^ f_rnd_ex7_res_frac[24] ^ f_rnd_ex7_res_frac[25] ^ f_rnd_ex7_res_frac[26] ^ f_rnd_ex7_res_frac[27] ^ f_rnd_ex7_res_frac[28];
assign frt_data_parity[5] = f_rnd_ex7_res_frac[29] ^ f_rnd_ex7_res_frac[30] ^ f_rnd_ex7_res_frac[31] ^ f_rnd_ex7_res_frac[32] ^ f_rnd_ex7_res_frac[33] ^ f_rnd_ex7_res_frac[34] ^ f_rnd_ex7_res_frac[35] ^ f_rnd_ex7_res_frac[36];
assign frt_data_parity[6] = f_rnd_ex7_res_frac[37] ^ f_rnd_ex7_res_frac[38] ^ f_rnd_ex7_res_frac[39] ^ f_rnd_ex7_res_frac[40] ^ f_rnd_ex7_res_frac[41] ^ f_rnd_ex7_res_frac[42] ^ f_rnd_ex7_res_frac[43] ^ f_rnd_ex7_res_frac[44];
assign frt_data_parity[7] = f_rnd_ex7_res_frac[45] ^ f_rnd_ex7_res_frac[46] ^ f_rnd_ex7_res_frac[47] ^ f_rnd_ex7_res_frac[48] ^ f_rnd_ex7_res_frac[49] ^ f_rnd_ex7_res_frac[50] ^ f_rnd_ex7_res_frac[51] ^ f_rnd_ex7_res_frac[52];
//----------------------------------------------------------------------
// Source Address
generate
if (threads == 1)
begin : addr_gen_1
assign rf0_fra_addr[1:7] = {1'b0, f_dcd_rf0_fra[0:5]}; //uc_hook
assign rf0_frb_addr[1:7] = {1'b0, f_dcd_rf0_frb[0:5]};
assign rf0_frc_addr[1:7] = {1'b0, f_dcd_rf0_frc[0:5]};
end
endgenerate
generate
if (threads == 2)
begin : addr_gen_2
assign rf0_fra_addr[1:7] = {f_dcd_rf0_fra[0:5], f_dcd_rf0_tid[1]}; //uc_hook
assign rf0_frb_addr[1:7] = {f_dcd_rf0_frb[0:5], f_dcd_rf0_tid[1]};
assign rf0_frc_addr[1:7] = {f_dcd_rf0_frc[0:5], f_dcd_rf0_tid[1]};
end
endgenerate
assign rf0_frs_addr[1:7] = iu_fu_rf0_ldst_tag[3:9];
// Microcode Scratch Registers
assign rf0_fra_addr[0] = tilo; // uc_hook
assign rf0_frb_addr[0] = tilo;
assign rf0_frc_addr[0] = tilo;
assign frt_addr[0] = tilo;
assign rf0_frs_addr[0] = tilo; // Don't need to store from scratch regs
assign load_addr[0] = tilo; // Don't need to load into scratch regs
// For bypass writethru compare
assign f_fpr_ex6_load_addr[0:7] = {1'b0, ex6_load_tag[3:9]}; // bit 9 is the tid
assign f_fpr_ex6_reload_addr[0:7] = {1'b0, ex6_reload_tag[3:9]}; // bit 9 is the tid
assign f_fpr_ex6_load_v = load_wen;
assign f_fpr_ex6_reload_v = reload_wen;
//----------------------------------------------------------------------
// RF0
//----------------------------------------------------------------------
// RF1
assign w0e_en_func = load_wen;
assign w0e_addr_func[0:7] = load_addr[0:7];
assign w0l_en_func = frt_wen;
assign w0l_addr_func[0:7] = frt_addr[0:7];
//parity(0 to 7)<= data(66 to 73) 0:7
//"000" 8:10
//sign <= data(0); 11
//expo(1) 12
//expo(2 to 13) <= data(1 to 12); 13:24
//frac(0 to 52) <= data(13 to 65); 25:77
assign w0e_data_func_f0[0:77] = {load_data_f0[66:73], 3'b000, load_data_f0[0], 1'b0, load_data_f0[1:65]};
assign w0e_data_func_f1[0:77] = {load_data_f1[66:73], 3'b000, load_data_f1[0], 1'b0, load_data_f1[1:65]};
assign rel_data_func_f0[0:77] = {reload_data_f0[66:73], 3'b000, reload_data_f0[0], 1'b0, reload_data_f0[1:65]};
assign rel_data_func_f1[0:77] = {reload_data_f1[66:73], 3'b000, reload_data_f1[0], 1'b0, reload_data_f1[1:65]};
assign w0l_data_func_f0[0:77] = {frt_data_parity[0:7], 3'b000, f_rnd_ex7_res_sign, f_rnd_ex7_res_expo[1:13], f_rnd_ex7_res_frac[0:52]};
assign w0l_data_func_f1[0:77] = {frt_data_parity[0:6], (frt_data_parity[7] ^ ex7_targ_perr_inj), 3'b000, f_rnd_ex7_res_sign, f_rnd_ex7_res_expo[1:13], f_rnd_ex7_res_frac[0:52]};
assign rf1_fra[0:77] = fra_data_out[0:77]; //frac
assign rf1_frb[0:77] = frb_data_out[0:77]; //frac
assign rf1_frc[0:77] = frc_data_out[0:77]; //frac
assign rf1_frs[0:77] = frs_data_out[0:77]; //frac
// -- Array Instantiation
// f0 : entity tri.tri_144x78_2r2w
// generic map (expand_type => expand_type)
// port map(
// vdd => vdd ,
// gnd => gnd ,
// nclk => nclk ,
// abist_en => pc_fu_abist_ena_dc ,
// abist_raw_dc_b => pc_fu_abist_raw_dc_b ,
// r0e_abist_comp_en => r0e_abist_comp_en ,
// r1e_abist_comp_en => r1e_abist_comp_en ,
//-- lbist_en => lbist_en_dc ,
//-- tri_state_en => tri_state_en ,
// lcb_act_dis_dc => lcb_act_dis_dc ,
// lcb_clkoff_dc_b => lcb_clkoff_dc_b ,
// lcb_d_mode_dc => lcb_d_mode_dc ,
// lcb_delay_lclkr_dc => lcb_delay_lclkr_dc ,
// lcb_fce_0 => fce_0 ,
// lcb_mpw1_dc_b => lcb_mpw1_dc_b(1 to 6) ,
// lcb_mpw2_dc_b => lcb_mpw2_dc_b ,
// lcb_scan_diag_dc => scan_diag_dc ,
// lcb_scan_dis_dc_b => scan_dis_dc_b ,
// lcb_sg_0 => lcb_sg_0 ,
// lcb_abst_sl_thold_0 => lcb_abst_sl_thold_0 ,
// lcb_ary_nsl_thold_0 => ary_nsl_thold_0 ,
// r_scan_in => r_scan_in_0 ,
// r_scan_out => r_scan_out_0 ,
// w_scan_in => w_scan_in_0 ,
// w_scan_out => w_scan_out_0 ,
// -- Read Port FRA
// r0e_act => r0e_act ,
// r0e_en_func => r0e_en_func ,
// r0e_en_abist => r0e_en_abist ,
// r0e_addr_func => rf0_fra_addr ,
// r0e_addr_abist => r0e_addr_abist ,
// r0e_data_out => fra_data_out ,
// r0e_byp_e => rf1_bypsel_a_load1 ,
// r0e_byp_l => rf1_bypsel_a_res1 ,
// r0e_byp_r => rf1_a_r0e_byp_r,
// -- Read Port FRC
// r1e_act => r1e_act ,
// r1e_en_func => r1e_en_func ,
// r1e_en_abist => r1e_en_abist ,
// r1e_addr_func => rf0_frc_addr ,
// r1e_addr_abist => r1e_addr_abist ,
// r1e_data_out => frc_data_out ,
// r1e_byp_e => rf1_bypsel_c_load1 ,
// r1e_byp_l => rf1_bypsel_c_res1 ,
// r1e_byp_r => rf1_c_r1e_byp_r,
// -- Write Ports
// w0e_act => w0e_act ,
// w0e_en_func => w0e_en_func ,
// w0e_en_abist => w0e_en_abist ,
// w0e_addr_func => w0e_addr_func ,
// w0e_addr_abist => w0e_addr_abist ,
// w0e_data_func => w0e_data_func ,
// w0e_data_abist => w0e_data_abist ,
// w0e_pw_sel => "0000", -- TODO
// w0e_rsdly_sel => "00", -- TODO
// w0l_act => w0l_act ,
// w0l_en_func => w0l_en_func ,
// w0l_en_abist => w0l_en_abist ,
// w0l_addr_func => w0l_addr_func ,
// w0l_addr_abist => w0l_addr_abist ,
// w0l_data_func => w0l_data_func ,
// w0l_data_abist => w0l_data_abist ,
// w0l_pw_sel => "0000", -- TODO
// w0l_rsdly_sel => "00" -- TODO
// );
// -- Array Instantiation
// f1 : entity tri.tri_144x78_2r2w
// generic map (expand_type => expand_type)
// port map(
// vdd => vdd ,
// gnd => gnd ,
// nclk => nclk ,
// abist_en => pc_fu_abist_ena_dc ,
// abist_raw_dc_b => pc_fu_abist_raw_dc_b ,
// r0e_abist_comp_en => r0e_abist_comp_en ,
// r1e_abist_comp_en => r1e_abist_comp_en ,
//-- lbist_en => lbist_en_dc ,
//-- tri_state_en => tri_state_en ,
// lcb_act_dis_dc => lcb_act_dis_dc ,
// lcb_clkoff_dc_b => lcb_clkoff_dc_b ,
// lcb_d_mode_dc => lcb_d_mode_dc ,
// lcb_delay_lclkr_dc => lcb_delay_lclkr_dc ,
// lcb_fce_0 => fce_0 ,
// lcb_mpw1_dc_b => lcb_mpw1_dc_b(1 to 6) ,
// lcb_mpw2_dc_b => lcb_mpw2_dc_b ,
// lcb_scan_diag_dc => scan_diag_dc ,
// lcb_scan_dis_dc_b => scan_dis_dc_b ,
// lcb_sg_0 => lcb_sg_0 ,
// lcb_abst_sl_thold_0 => lcb_abst_sl_thold_0 ,
// lcb_ary_nsl_thold_0 => ary_nsl_thold_0 ,
// r_scan_in => r_scan_in_1 ,
// r_scan_out => r_scan_out_1 ,
// w_scan_in => w_scan_in_1 ,
// w_scan_out => w_scan_out_1 ,
// -- Read Port FRB
// r0e_act => r0e_act ,
// r0e_en_func => r0e_en_func ,
// r0e_en_abist => r0e_en_abist ,
// r0e_addr_func => rf0_frb_addr ,
// r0e_addr_abist => r0e_addr_abist ,
// r0e_data_out => frb_data_out ,
// r0e_byp_e => rf1_bypsel_b_load1 ,
// r0e_byp_l => rf1_bypsel_b_res1 ,
// r0e_byp_r => rf1_b_r0e_byp_r,
// -- Read Port FRS
// r1e_act => r1e_act ,
// r1e_en_func => r1e_en_func ,
// r1e_en_abist => r1e_en_abist ,
// r1e_addr_func => rf0_frs_addr ,
// r1e_addr_abist => r1e_addr_abist ,
// r1e_data_out => frs_data_out ,
// r1e_byp_e => rf1_bypsel_s_load1 ,
// r1e_byp_l => rf1_bypsel_s_res1 ,
// r1e_byp_r => rf1_s_r1e_byp_r,
// -- Write Ports
// w0e_act => w0e_act ,
// w0e_en_func => w0e_en_func ,
// w0e_en_abist => w0e_en_abist ,
// w0e_addr_func => w0e_addr_func ,
// w0e_addr_abist => w0e_addr_abist ,
// w0e_data_func => w0e_data_func ,
// w0e_data_abist => w0e_data_abist ,
// w0e_pw_sel => "0000", -- TODO
// w0e_rsdly_sel => "00", -- TODO
// w0l_act => w0l_act ,
// w0l_en_func => w0l_en_func ,
// w0l_en_abist => w0l_en_abist ,
// w0l_addr_func => w0l_addr_func ,
// w0l_addr_abist => w0l_addr_abist ,
// w0l_data_func => w0l_data_func ,
// w0l_data_abist => w0l_data_abist ,
// w0l_pw_sel => "0000", -- TODO
// w0l_rsdly_sel => "00" -- TODO
// );
//
assign r0e_en_func = tiup;
assign r1e_en_func = tiup;
tri_144x78_2r4w fpr0( // .regsize(64), #( .gpr_pool(fpr_pool), .gpr_pool_enc(fpr_pool_enc))
.vdd(vdd),
.gnd(gnd),
.nclk(nclk),
.delay_lclkr_dc(delay_lclkra[0]),
.mpw1_dc_b(mpw1_ba[0]),
.mpw2_dc_b(mpw2_b[0]),
.func_sl_force(force_t),
.func_sl_thold_0_b(thold_0_b),
.func_slp_sl_force(force_t),
.func_slp_sl_thold_0_b(thold_0_b),
.sg_0(sg_0),
.scan_in(scan_in_0),
.scan_out(scan_out_0),
// Read Port FRA
.r_late_en_1(r0e_en_func),
.r_addr_in_1(rf0_fra_addr[(3 - threads):7]), // rf0_fra_addr(1 to 7),
.r_data_out_1(fra_data_out),
// Read Port FRC
.r_late_en_2(r1e_en_func),
.r_addr_in_2(rf0_frc_addr[(3 - threads):7]), //rf0_frc_addr(1 to 7),
.r_data_out_2(frc_data_out),
// Write Ports
.w_late_en_1(w0e_en_func),
.w_addr_in_1(w0e_addr_func[(3 - threads):7]), //w0e_addr_func(1 to 7),
.w_data_in_1(w0e_data_func_f0),
.w_late_en_2(w0l_en_func),
.w_addr_in_2(w0l_addr_func[(3 - threads):7]), //w0l_addr_func(1 to 7)
.w_data_in_2(w0l_data_func_f0),
.w_late_en_3(reload_wen),
.w_addr_in_3(reload_addr[(3 - threads):7]), //reload_addr(1 to 7),
.w_data_in_3(rel_data_func_f0),
.w_late_en_4(tilo),
.w_addr_in_4(zeros[(3 - threads):7]),
.w_data_in_4(zeros[0:77])
);
tri_144x78_2r4w fpr1(// .regsize(64),#( .gpr_pool(fpr_pool), .gpr_pool_enc(fpr_pool_enc))
.vdd(vdd),
.gnd(gnd),
.nclk(nclk),
.delay_lclkr_dc(delay_lclkra[0]),
.mpw1_dc_b(mpw1_ba[0]),
.mpw2_dc_b(mpw2_b[0]),
.func_sl_force(force_t),
.func_sl_thold_0_b(thold_0_b),
.func_slp_sl_force(force_t),
.func_slp_sl_thold_0_b(thold_0_b),
.sg_0(sg_0),
.scan_in(scan_in_1),
.scan_out(scan_out_1),
// Read Port FRB
.r_late_en_1(r0e_en_func),
.r_addr_in_1(rf0_frb_addr[(3 - threads):7]), //rf0_frb_addr(1 to 7),
.r_data_out_1(frb_data_out),
// Read Port FRS
.r_late_en_2(r1e_en_func),
.r_addr_in_2(rf0_frs_addr[(3 - threads):7]), //rf0_frs_addr(1 to 7),
.r_data_out_2(frs_data_out),
// Write Ports
.w_late_en_1(w0e_en_func),
.w_addr_in_1(w0e_addr_func[(3 - threads):7]), //w0e_addr_func(1 to 7),
.w_data_in_1(w0e_data_func_f1),
.w_late_en_2(w0l_en_func),
.w_addr_in_2(w0l_addr_func[(3 - threads):7]), //w0l_addr_func(1 to 7),
.w_data_in_2(w0l_data_func_f1),
.w_late_en_3(reload_wen),
.w_addr_in_3(reload_addr[(3 - threads):7]), //reload_addr(1 to 7),
.w_data_in_3(rel_data_func_f1),
.w_late_en_4(tilo),
.w_addr_in_4(zeros[(3 - threads):7]),
.w_data_in_4(zeros[0:77])
);
// ABIST timing latches
tri_rlmreg_p #(.INIT(0), .WIDTH(53), .NEEDS_SRESET(0)) ab_reg(
.nclk(nclk),
.act(tihi),
.force_t(ab_force),
.d_mode(tiup),
.delay_lclkr(delay_lclkra[0]),
.mpw1_b(mpw1_ba[0]),
.mpw2_b(mpw2_b[0]),
.thold_b(ab_thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ab_reg_si[0:52]),
.scout(ab_reg_so[0:52]),
.din({ pc_fu_abist_di_0[0:3],
pc_fu_abist_di_1[0:3],
pc_fu_abist_grf_renb_0,
pc_fu_abist_grf_renb_1,
pc_fu_abist_grf_wenb_0,
pc_fu_abist_grf_wenb_1,
pc_fu_abist_raddr_0[0:9],
pc_fu_abist_raddr_1[0:9],
pc_fu_abist_waddr_0[0:9],
pc_fu_abist_waddr_1[0:9],
pc_fu_abist_wl144_comp_ena}),
.dout({ w0e_data_abist[0:3],
w0l_data_abist[0:3],
r0e_en_abist,
r1e_en_abist,
w0e_en_abist,
w0l_en_abist,
abist_raddr_0[0:9],
abist_raddr_1[0:9],
abist_waddr_0[0:9],
abist_waddr_1[0:9],
abist_comp_en })
);
tri_lcbcntl_array_mac lcbctrl(
.vdd(vdd),
.gnd(gnd),
.sg(sg_0),
.nclk(nclk),
.scan_in(time_scan_in), // Connects to time scan ring
.scan_diag_dc(scan_diag_dc),
.thold(time_sl_thold_0), //Connects to time thold
.clkoff_dc_b(clkoff_dc_b),
.delay_lclkr_dc(lcb_delay_lclkr_dc[0:4]),
.act_dis_dc(lcb_act_dis_dc),
.d_mode_dc(d_mode_dc),
.mpw1_dc_b(lcb_mpw1_dc_b[0:4]),
.mpw2_dc_b(lcb_mpw2_dc_b),
.scan_out(time_scan_out) // Connects to time scan ring
);
assign lcb_mpw1_dc_b[5:6] = 2'b00; // TODO: What is to be done with this?
// Other inputs
assign r0e_abist_comp_en = abist_comp_en;
assign r1e_abist_comp_en = abist_comp_en;
assign lcb_sg_0 = sg_0;
assign lcb_abst_sl_thold_0 = ab_thold_0;
assign lcb_d_mode_dc = d_mode_dc;
assign lcb_clkoff_dc_b = {2{clkoff_dc_b}};
assign r0e_addr_abist[0:7] = abist_raddr_0[2:9];
assign r1e_addr_abist[0:7] = abist_raddr_1[2:9];
assign w0e_act = 1'b1;
assign w0e_addr_abist[0:7] = abist_waddr_1[2:9];
assign w0l_act = 1'b1;
assign w0l_addr_abist[0:7] = abist_waddr_1[2:9];
//----------------------------------------------------------------------
// Parity Checking
tri_rlmreg_p #(.INIT(0), .WIDTH(34), .NEEDS_SRESET(0)) ex1_par(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkra[1]),
.mpw1_b(mpw1_ba[1]),
.mpw2_b(mpw2_b[0]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex1_par_si[0:33]),
.scout(ex1_par_so[0:33]),
.din({ rf1_fra[0:7],
rf1_frb[0:7],
rf1_frc[0:7],
rf1_frs[0:7],
rf1_frs[12:13]}),
.dout({ ex1_fra_par[0:7],
ex1_frb_par[0:7],
ex1_frc_par[0:7],
ex1_frs_par[0:7],
ex1_s_expo_extra[0:1]})
);
assign f_fpr_ex2_a_par[0:7] = ex1_fra_par[0:7];
assign f_fpr_ex2_b_par[0:7] = ex1_frb_par[0:7];
assign f_fpr_ex2_c_par[0:7] = ex1_frc_par[0:7];
assign f_fpr_ex2_s_par[0:7] = ex1_frs_par[0:7];
//----------------------------------------------------------------------
// Read Port Outputs
//parity(0 to 7)<= data(66 to 73) 0:7
//"000" 8:10
//sign <= data(0); 11
//expo(1) 12
//expo(2 to 13) <= data(1 to 12); 13:24
//frac(0 to 52) <= data(13 to 65); 25:77
assign f_fpr_ex1_a_sign = rf1_fra[11];
assign f_fpr_ex1_a_expo[1:13] = rf1_fra[12:24];
assign f_fpr_ex1_a_frac[0:52] = rf1_fra[25:77];
assign f_fpr_ex1_c_sign = rf1_frc[11];
assign f_fpr_ex1_c_expo[1:13] = rf1_frc[12:24];
assign f_fpr_ex1_c_frac[0:52] = rf1_frc[25:77];
assign f_fpr_ex1_b_sign = rf1_frb[11];
assign f_fpr_ex1_b_expo[1:13] = rf1_frb[12:24];
assign f_fpr_ex1_b_frac[0:52] = rf1_frb[25:77];
assign f_fpr_ex1_s_sign = rf1_frs[11];
assign f_fpr_ex1_s_expo[1:11] = rf1_frs[14:24];
assign f_fpr_ex1_s_frac[0:52] = rf1_frs[25:77];
// For Parity checking only, not used by store
assign f_fpr_ex2_s_expo_extra = ex1_s_expo_extra;
//----------------------------------------------------------------------
// Write-thru bypass
// Load Bypass
tri_rlmreg_p #(.INIT(0), .WIDTH(132), .NEEDS_SRESET(0)) ldwt_lat(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[7]), //todo, break out into ex7, ex8
.mpw1_b(mpw1_bb[7]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ldwt_lat_si[0:131]),
.scout(ldwt_lat_so[0:131]),
//-------------------------------------------
.din({ ex6_load_data_byp[0:65],
ex7_load_data_byp[0:65] }),
//-------------------------------------------
.dout({ex7_load_data_byp[0:65],
ex8_load_data_byp[0:65] })
);
//-------------------------------------------
tri_rlmreg_p #(.INIT(0), .WIDTH(132), .NEEDS_SRESET(0)) reldwt_lat(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[7]),
.mpw1_b(mpw1_bb[7]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(reldwt_lat_si[0:131]),
.scout(reldwt_lat_so[0:131]),
//-------------------------------------------
.din({ ex6_reload_data_byp[0:65],
ex7_reload_data_byp[0:65] }),
//-------------------------------------------
.dout({ex7_reload_data_byp[0:65],
ex8_reload_data_byp[0:65] })
);
//-------------------------------------------
assign ex6_reload_data_byp = ex6_reload_data[0:65];
assign ex6_load_data_byp = ex6_load_data[0:65];
assign f_fpr_ex6_load_sign = ex6_load_data_byp[0];
assign f_fpr_ex6_load_expo[3:13] = ex6_load_data_byp[2:12];
assign f_fpr_ex6_load_frac[0:52] = ex6_load_data_byp[13:65];
// Latched Write Ports for bypass
assign f_fpr_ex7_load_sign = ex7_load_data_byp[0];
assign f_fpr_ex7_load_expo[3:13] = ex7_load_data_byp[2:12];
assign f_fpr_ex7_load_frac[0:52] = ex7_load_data_byp[13:65];
assign f_fpr_ex8_load_sign = ex8_load_data_byp[0];
assign f_fpr_ex8_load_expo[3:13] = ex8_load_data_byp[2:12];
assign f_fpr_ex8_load_frac[0:52] = ex8_load_data_byp[13:65];
// reload
assign f_fpr_ex6_reload_sign = ex6_reload_data_byp[0];
assign f_fpr_ex6_reload_expo[3:13] = ex6_reload_data_byp[2:12];
assign f_fpr_ex6_reload_frac[0:52] = ex6_reload_data_byp[13:65];
// Latched Write Ports for bypass
assign f_fpr_ex7_reload_sign = ex7_reload_data_byp[0];
assign f_fpr_ex7_reload_expo[3:13] = ex7_reload_data_byp[2:12];
assign f_fpr_ex7_reload_frac[0:52] = ex7_reload_data_byp[13:65];
assign f_fpr_ex8_reload_sign = ex8_reload_data_byp[0];
assign f_fpr_ex8_reload_expo[3:13] = ex8_reload_data_byp[2:12];
assign f_fpr_ex8_reload_frac[0:52] = ex8_reload_data_byp[13:65];
// Target Bypass
tri_rlmreg_p #(.INIT(0), .WIDTH(134), .NEEDS_SRESET(0)) tgwt_lat(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkrb[7]),// todo, need 8,9?
.mpw1_b(mpw1_bb[7]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(tgwt_lat_si[0:133]),
.scout(tgwt_lat_so[0:133]),
//-------------------------------------------
.din({ex7_frt_data[0:66],
ex8_frt_data[0:66] }),
//-------------------------------------------
.dout({ex8_frt_data[0:66],
ex9_frt_data[0:66] })
);
//-------------------------------------------
assign ex7_frt_data[0] = f_rnd_ex7_res_sign;
assign ex7_frt_data[1:13] = f_rnd_ex7_res_expo[1:13];
assign ex7_frt_data[14:66] = f_rnd_ex7_res_frac[0:52];
assign f_fpr_ex8_frt_sign = ex8_frt_data[0];
assign f_fpr_ex8_frt_expo[1:13] = ex8_frt_data[1:13];
assign f_fpr_ex8_frt_frac[0:52] = ex8_frt_data[14:66];
assign f_fpr_ex9_frt_sign = ex9_frt_data[0];
assign f_fpr_ex9_frt_expo[1:13] = ex9_frt_data[1:13];
assign f_fpr_ex9_frt_frac[0:52] = ex9_frt_data[14:66];
//----------------------------------------------------------------------
// Scan Chains
assign ex7_ldat_si[0:63] = {ex7_ldat_so[1:63], f_fpr_si};
assign ex7_rldat_si[0:63] = {ex7_rldat_so[1:63], ex7_ldat_so[0]};
assign ex7_ldv_si[0:1] = {ex7_ldv_so[1], ex7_rldat_so[0]};
assign ex7_lctl_si[0:11] = {ex7_lctl_so[1:11], ex7_ldv_so[0]};
assign ex7_rlctl_si[0:9] = {ex7_rlctl_so[1:9], ex7_lctl_so[0]};
assign ex6_lctl_si[0:4] = {ex6_lctl_so[1:4], ex7_rlctl_so[0]};
assign ex1_par_si[0:33] = {ex1_par_so[1:33], ex6_lctl_so[0]};
assign ldwt_lat_si[0:131] = {ldwt_lat_so[1:131], ex1_par_so[0]};
assign reldwt_lat_si[0:131] = {reldwt_lat_so[1:131],ldwt_lat_so[0] };
assign tgwt_lat_si[0:133] = {tgwt_lat_so[1:133], reldwt_lat_so[0]};
assign f_fpr_so = tgwt_lat_so[0];
assign scan_in_0 = f_fpr_ab_si;
assign scan_in_1 = scan_out_0;
assign ab_reg_si[0:52] = {ab_reg_so[1:52], scan_out_1};
assign f_fpr_ab_so = ab_reg_so[0];
//----------------------------------------------------------------------
// Unused
assign spare_unused[2:4] = iu_fu_rf0_ldst_tag[0:2];
assign spare_unused[5:7] = rf1_fra[8:10];
assign spare_unused[8:10] = rf1_frb[8:10];
assign spare_unused[11:13] = rf1_frc[8:10];
assign spare_unused[14:16] = rf1_frs[8:10];
assign spare_unused[17:18] = abist_raddr_0[0:1];
assign spare_unused[19:20] = abist_raddr_1[0:1];
assign spare_unused[21:22] = abist_waddr_0[0:1];
assign spare_unused[23:24] = abist_waddr_1[0:1];
assign spare_unused[25] = lcb_mpw1_dc_b[0];
endmodule