You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
427 lines
15 KiB
Verilog
427 lines
15 KiB
Verilog
3 years ago
|
// © IBM Corp. 2020
|
||
|
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
|
||
|
// the terms below; you may not use the files in this repository except in
|
||
|
// compliance with the License as modified.
|
||
|
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
|
||
|
//
|
||
|
// Modified Terms:
|
||
|
//
|
||
|
// 1) For the purpose of the patent license granted to you in Section 3 of the
|
||
|
// License, the "Work" hereby includes implementations of the work of authorship
|
||
|
// in physical form.
|
||
|
//
|
||
|
// 2) Notwithstanding any terms to the contrary in the License, any licenses
|
||
|
// necessary for implementation of the Work that are available from OpenPOWER
|
||
|
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
|
||
|
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
|
||
|
// of the EULA.
|
||
|
//
|
||
|
// Unless required by applicable law or agreed to in writing, the reference design
|
||
|
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||
|
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
|
||
|
// for the specific language governing permissions and limitations under the License.
|
||
|
//
|
||
|
// Additional rights, including the ability to physically implement a softcore that
|
||
|
// is compliant with the required sections of the Power ISA Specification, are
|
||
|
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
|
||
|
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
|
||
|
|
||
|
`timescale 1 ns / 1 ns
|
||
|
|
||
|
// *!****************************************************************
|
||
|
// *! FILENAME : tri_64x144_1r1w.v
|
||
|
// *! DESCRIPTION : 64 Entry x 144 bit array, 9 bit writeable
|
||
|
// *!
|
||
|
// *!****************************************************************
|
||
|
|
||
|
`include "tri_a2o.vh"
|
||
|
|
||
|
module tri_64x144_1r1w(
|
||
|
gnd,
|
||
|
vdd,
|
||
|
vcs,
|
||
|
nclk,
|
||
|
rd_act,
|
||
|
wr_act,
|
||
|
sg_0,
|
||
|
abst_sl_thold_0,
|
||
|
ary_nsl_thold_0,
|
||
|
time_sl_thold_0,
|
||
|
repr_sl_thold_0,
|
||
|
func_sl_force,
|
||
|
func_sl_thold_0_b,
|
||
|
g8t_clkoff_dc_b,
|
||
|
ccflush_dc,
|
||
|
scan_dis_dc_b,
|
||
|
scan_diag_dc,
|
||
|
g8t_d_mode_dc,
|
||
|
g8t_mpw1_dc_b,
|
||
|
g8t_mpw2_dc_b,
|
||
|
g8t_delay_lclkr_dc,
|
||
|
d_mode_dc,
|
||
|
mpw1_dc_b,
|
||
|
mpw2_dc_b,
|
||
|
delay_lclkr_dc,
|
||
|
wr_abst_act,
|
||
|
rd0_abst_act,
|
||
|
abist_di,
|
||
|
abist_bw_odd,
|
||
|
abist_bw_even,
|
||
|
abist_wr_adr,
|
||
|
abist_rd0_adr,
|
||
|
tc_lbist_ary_wrt_thru_dc,
|
||
|
abist_ena_1,
|
||
|
abist_g8t_rd0_comp_ena,
|
||
|
abist_raw_dc_b,
|
||
|
obs0_abist_cmp,
|
||
|
abst_scan_in,
|
||
|
time_scan_in,
|
||
|
repr_scan_in,
|
||
|
func_scan_in,
|
||
|
abst_scan_out,
|
||
|
time_scan_out,
|
||
|
repr_scan_out,
|
||
|
func_scan_out,
|
||
|
lcb_bolt_sl_thold_0,
|
||
|
pc_bo_enable_2,
|
||
|
pc_bo_reset,
|
||
|
pc_bo_unload,
|
||
|
pc_bo_repair,
|
||
|
pc_bo_shdata,
|
||
|
pc_bo_select,
|
||
|
bo_pc_failout,
|
||
|
bo_pc_diagloop,
|
||
|
tri_lcb_mpw1_dc_b,
|
||
|
tri_lcb_mpw2_dc_b,
|
||
|
tri_lcb_delay_lclkr_dc,
|
||
|
tri_lcb_clkoff_dc_b,
|
||
|
tri_lcb_act_dis_dc,
|
||
|
write_enable,
|
||
|
addr_wr,
|
||
|
data_in,
|
||
|
addr_rd,
|
||
|
data_out
|
||
|
);
|
||
|
parameter addressable_ports = 64; // number of addressable register in this array
|
||
|
parameter addressbus_width = 6; // width of the bus to address all ports (2^addressbus_width >= addressable_ports)
|
||
|
parameter port_bitwidth = 144; // bitwidth of ports (per way)
|
||
|
parameter bit_write_type = 9; // gives the number of bits that shares one write-enable; must divide evenly into array
|
||
|
parameter ways = 1; // number of ways
|
||
|
|
||
|
// POWER PINS
|
||
|
inout gnd;
|
||
|
inout vdd;
|
||
|
inout vcs;
|
||
|
|
||
|
// CLOCK and CLOCKCONTROL ports
|
||
|
input [0:`NCLK_WIDTH-1] nclk;
|
||
|
input rd_act;
|
||
|
input wr_act;
|
||
|
input sg_0;
|
||
|
input abst_sl_thold_0;
|
||
|
input ary_nsl_thold_0;
|
||
|
input time_sl_thold_0;
|
||
|
input repr_sl_thold_0;
|
||
|
input func_sl_force;
|
||
|
input func_sl_thold_0_b;
|
||
|
input g8t_clkoff_dc_b;
|
||
|
input ccflush_dc;
|
||
|
input scan_dis_dc_b;
|
||
|
input scan_diag_dc;
|
||
|
input g8t_d_mode_dc;
|
||
|
input [0:4] g8t_mpw1_dc_b;
|
||
|
input g8t_mpw2_dc_b;
|
||
|
input [0:4] g8t_delay_lclkr_dc;
|
||
|
input d_mode_dc;
|
||
|
input mpw1_dc_b;
|
||
|
input mpw2_dc_b;
|
||
|
input delay_lclkr_dc;
|
||
|
|
||
|
// ABIST
|
||
|
input wr_abst_act;
|
||
|
input rd0_abst_act;
|
||
|
input [0:3] abist_di;
|
||
|
input abist_bw_odd;
|
||
|
input abist_bw_even;
|
||
|
input [0:addressbus_width-1] abist_wr_adr;
|
||
|
input [0:addressbus_width-1] abist_rd0_adr;
|
||
|
input tc_lbist_ary_wrt_thru_dc;
|
||
|
input abist_ena_1;
|
||
|
input abist_g8t_rd0_comp_ena;
|
||
|
input abist_raw_dc_b;
|
||
|
input [0:3] obs0_abist_cmp;
|
||
|
|
||
|
// Scan
|
||
|
input abst_scan_in;
|
||
|
input time_scan_in;
|
||
|
input repr_scan_in;
|
||
|
input func_scan_in;
|
||
|
output abst_scan_out;
|
||
|
output time_scan_out;
|
||
|
output repr_scan_out;
|
||
|
output func_scan_out;
|
||
|
|
||
|
// BOLT-ON
|
||
|
input lcb_bolt_sl_thold_0;
|
||
|
input pc_bo_enable_2; // general bolt-on enable
|
||
|
input pc_bo_reset; // reset
|
||
|
input pc_bo_unload; // unload sticky bits
|
||
|
input pc_bo_repair; // execute sticky bit decode
|
||
|
input pc_bo_shdata; // shift data for timing write and diag loop
|
||
|
input [0:1] pc_bo_select; // select for mask and hier writes
|
||
|
output [0:1] bo_pc_failout; // fail/no-fix reg
|
||
|
output [0:1] bo_pc_diagloop;
|
||
|
input tri_lcb_mpw1_dc_b;
|
||
|
input tri_lcb_mpw2_dc_b;
|
||
|
input tri_lcb_delay_lclkr_dc;
|
||
|
input tri_lcb_clkoff_dc_b;
|
||
|
input tri_lcb_act_dis_dc;
|
||
|
|
||
|
// Write Ports
|
||
|
input write_enable;
|
||
|
input [0:addressbus_width-1] addr_wr;
|
||
|
input [0:port_bitwidth-1] data_in;
|
||
|
|
||
|
// Read Ports
|
||
|
input [0:addressbus_width-1] addr_rd;
|
||
|
output [0:port_bitwidth-1] data_out;
|
||
|
|
||
|
// tri_64x144_1r1w
|
||
|
|
||
|
// Configuration Statement for NCsim
|
||
|
//for all:RAMB36 use entity unisim.RAMB36;
|
||
|
|
||
|
parameter data_width = ((((port_bitwidth - 1)/36) + 1) * 36) - 1;
|
||
|
parameter rd_act_offset = 0;
|
||
|
parameter data_out_offset = rd_act_offset + 1;
|
||
|
parameter scan_right = data_out_offset + port_bitwidth - 1;
|
||
|
|
||
|
wire [0:data_width-(data_width/9)-1] ramb_data_in;
|
||
|
wire [0:data_width/9] ramb_par_in;
|
||
|
wire [0:data_width-(data_width/9)-1] ramb_data_out;
|
||
|
wire [0:data_width/9] ramb_par_out;
|
||
|
wire [0:data_width-(data_width/9)-1] ramb_data_dummy;
|
||
|
wire [0:data_width/9] ramb_par_dummy;
|
||
|
wire [0:15] ramb_wr_addr;
|
||
|
wire [0:15] ramb_rd_addr;
|
||
|
wire [0:data_width] data_in_pad;
|
||
|
wire [0:data_width] data_out_pad;
|
||
|
wire [0:((port_bitwidth-1)/36)] cascadeoutlata;
|
||
|
wire [0:((port_bitwidth-1)/36)] cascadeoutlatb;
|
||
|
wire [0:((port_bitwidth-1)/36)] cascadeoutrega;
|
||
|
wire [0:((port_bitwidth-1)/36)] cascadeoutregb;
|
||
|
wire rd_act_d;
|
||
|
wire rd_act_q;
|
||
|
wire [0:port_bitwidth-1] data_out_d;
|
||
|
wire [0:port_bitwidth-1] data_out_q;
|
||
|
|
||
|
wire tiup;
|
||
|
wire tidn;
|
||
|
wire [0:(((((port_bitwidth-1)/36)+1)*36)/9)-1] wrt_en;
|
||
|
wire act;
|
||
|
wire [0:scan_right] siv;
|
||
|
wire [0:scan_right] sov;
|
||
|
|
||
|
(* analysis_not_referenced="true" *)
|
||
|
wire unused;
|
||
|
|
||
|
generate begin
|
||
|
assign tiup = 1'b1;
|
||
|
assign tidn = 1'b0;
|
||
|
assign wrt_en = {(((((port_bitwidth-1)/36)+1)*36)/9){write_enable}};
|
||
|
assign act = rd_act | wr_act;
|
||
|
assign rd_act_d = rd_act;
|
||
|
|
||
|
assign ramb_wr_addr[0] = 1'b0;
|
||
|
assign ramb_wr_addr[11:15] = 5'b0;
|
||
|
assign ramb_rd_addr[0] = 1'b0;
|
||
|
assign ramb_rd_addr[11:15] = 5'b0;
|
||
|
|
||
|
genvar addr;
|
||
|
for (addr = 0; addr < 10; addr = addr + 1) begin : padA0
|
||
|
if (addr < 10 - addressbus_width)
|
||
|
begin
|
||
|
assign ramb_wr_addr[addr + 1] = 1'b0;
|
||
|
assign ramb_rd_addr[addr + 1] = 1'b0;
|
||
|
end
|
||
|
if (addr >= 10 - addressbus_width)
|
||
|
begin
|
||
|
assign ramb_wr_addr[addr + 1] = addr_wr[addr - (10 - addressbus_width)];
|
||
|
assign ramb_rd_addr[addr + 1] = addr_rd[addr - (10 - addressbus_width)];
|
||
|
end
|
||
|
end
|
||
|
|
||
|
// PORTA => Used for Writing
|
||
|
// PORTB => Used for Reading
|
||
|
genvar arr;
|
||
|
for (arr = 0; arr <= (port_bitwidth - 1)/36; arr = arr + 1)
|
||
|
begin : padD0
|
||
|
genvar b;
|
||
|
for (b = 0; b < 36; b = b + 1)
|
||
|
begin : numBit
|
||
|
if ((arr * 36) + b < port_bitwidth)
|
||
|
begin
|
||
|
assign data_in_pad[(arr * 36) + b] = data_in[(arr * 36) + b];
|
||
|
end
|
||
|
if ((arr * 36) + b >= port_bitwidth)
|
||
|
begin
|
||
|
assign data_in_pad[(arr * 36) + b] = 1'b0;
|
||
|
end
|
||
|
end
|
||
|
end
|
||
|
|
||
|
genvar bb;
|
||
|
for (bb = 0; bb <= (data_width)/9; bb = bb + 1)
|
||
|
begin : dInFixUp
|
||
|
assign ramb_data_in[bb * 8:(bb * 8) + 7] = data_in_pad[(bb * 8) + bb:(bb * 8) + 7 + bb];
|
||
|
assign ramb_par_in[bb] = data_in_pad[(bb * 8) + bb + 8];
|
||
|
end
|
||
|
|
||
|
for (bb = 0; bb <= (data_width)/9; bb = bb + 1)
|
||
|
begin : dOutFixUp
|
||
|
assign data_out_pad[(bb * 8) + bb:(bb * 8) + 7 + bb] = ramb_data_out[bb * 8:(bb * 8) + 7];
|
||
|
assign data_out_pad[(bb * 8) + bb + 8] = ramb_par_out[bb];
|
||
|
end
|
||
|
|
||
|
genvar anum;
|
||
|
for (anum = 0; anum <= (port_bitwidth - 1)/36; anum = anum + 1)
|
||
|
begin : arrNum
|
||
|
|
||
|
RAMB36 #(.SIM_COLLISION_CHECK("NONE"), .READ_WIDTH_A(36), .READ_WIDTH_B(36), .WRITE_WIDTH_A(36), .WRITE_WIDTH_B(36), .WRITE_MODE_A("READ_FIRST"), .WRITE_MODE_B("READ_FIRST")) ARR(
|
||
|
.CASCADEOUTLATA(cascadeoutlata[anum]),
|
||
|
.CASCADEOUTLATB(cascadeoutlatb[anum]),
|
||
|
.CASCADEOUTREGA(cascadeoutrega[anum]),
|
||
|
.CASCADEOUTREGB(cascadeoutregb[anum]),
|
||
|
.DOA(ramb_data_dummy[(32 * anum):31 + (32 * anum)]),
|
||
|
.DOB(ramb_data_out[(32 * anum):31 + (32 * anum)]),
|
||
|
.DOPA(ramb_par_dummy[(4 * anum):3 + (4 * anum)]),
|
||
|
.DOPB(ramb_par_out[(4 * anum):3 + (4 * anum)]),
|
||
|
.ADDRA(ramb_wr_addr),
|
||
|
.ADDRB(ramb_rd_addr),
|
||
|
.CASCADEINLATA(1'b0),
|
||
|
.CASCADEINLATB(1'b0),
|
||
|
.CASCADEINREGA(1'b0),
|
||
|
.CASCADEINREGB(1'b0),
|
||
|
.CLKA(nclk[0]),
|
||
|
.CLKB(nclk[0]),
|
||
|
.DIA(ramb_data_in[(32 * anum):31 + (32 * anum)]),
|
||
|
.DIB(32'b0),
|
||
|
.DIPA(ramb_par_in[(4 * anum):3 + (4 * anum)]),
|
||
|
.DIPB(4'b0),
|
||
|
.ENA(act),
|
||
|
.ENB(act),
|
||
|
.REGCEA(1'b0),
|
||
|
.REGCEB(1'b0),
|
||
|
.SSRA(nclk[1]), //sreset
|
||
|
.SSRB(nclk[1]),
|
||
|
.WEA(wrt_en[anum * 4:anum * 4 + 3]),
|
||
|
.WEB(4'b0) //'
|
||
|
);
|
||
|
end
|
||
|
assign data_out_d = data_out_pad[0:port_bitwidth - 1];
|
||
|
assign data_out = data_out_q;
|
||
|
|
||
|
assign abst_scan_out = tidn;
|
||
|
assign time_scan_out = tidn;
|
||
|
assign repr_scan_out = tidn;
|
||
|
assign bo_pc_failout = 2'b00;
|
||
|
assign bo_pc_diagloop = 2'b00;
|
||
|
end
|
||
|
endgenerate
|
||
|
|
||
|
assign unused = | {
|
||
|
cascadeoutlata ,
|
||
|
cascadeoutlatb ,
|
||
|
cascadeoutrega ,
|
||
|
cascadeoutregb ,
|
||
|
ramb_data_dummy ,
|
||
|
ramb_par_dummy ,
|
||
|
nclk[2:`NCLK_WIDTH-1] ,
|
||
|
gnd ,
|
||
|
vdd ,
|
||
|
vcs ,
|
||
|
sg_0 ,
|
||
|
abst_sl_thold_0 ,
|
||
|
ary_nsl_thold_0 ,
|
||
|
time_sl_thold_0 ,
|
||
|
repr_sl_thold_0 ,
|
||
|
g8t_clkoff_dc_b ,
|
||
|
ccflush_dc ,
|
||
|
scan_dis_dc_b ,
|
||
|
scan_diag_dc ,
|
||
|
g8t_d_mode_dc ,
|
||
|
g8t_mpw1_dc_b ,
|
||
|
g8t_mpw2_dc_b ,
|
||
|
g8t_delay_lclkr_dc ,
|
||
|
wr_abst_act ,
|
||
|
rd0_abst_act ,
|
||
|
abist_di ,
|
||
|
abist_bw_odd ,
|
||
|
abist_bw_even ,
|
||
|
abist_wr_adr ,
|
||
|
abist_rd0_adr ,
|
||
|
tc_lbist_ary_wrt_thru_dc ,
|
||
|
abist_ena_1 ,
|
||
|
abist_g8t_rd0_comp_ena ,
|
||
|
abist_raw_dc_b ,
|
||
|
obs0_abist_cmp ,
|
||
|
abst_scan_in ,
|
||
|
time_scan_in ,
|
||
|
repr_scan_in ,
|
||
|
lcb_bolt_sl_thold_0 ,
|
||
|
pc_bo_enable_2 ,
|
||
|
pc_bo_reset ,
|
||
|
pc_bo_unload ,
|
||
|
pc_bo_repair ,
|
||
|
pc_bo_shdata ,
|
||
|
pc_bo_select ,
|
||
|
tri_lcb_mpw1_dc_b ,
|
||
|
tri_lcb_mpw2_dc_b ,
|
||
|
tri_lcb_delay_lclkr_dc ,
|
||
|
tri_lcb_clkoff_dc_b ,
|
||
|
tri_lcb_act_dis_dc };
|
||
|
|
||
|
// ####################################################
|
||
|
// Registers
|
||
|
// ####################################################
|
||
|
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) rd_act_reg(
|
||
|
.vd(vdd),
|
||
|
.gd(gnd),
|
||
|
.nclk(nclk),
|
||
|
.act(tiup),
|
||
|
.force_t(func_sl_force),
|
||
|
.d_mode(d_mode_dc),
|
||
|
.delay_lclkr(delay_lclkr_dc),
|
||
|
.mpw1_b(mpw1_dc_b),
|
||
|
.mpw2_b(mpw2_dc_b),
|
||
|
.thold_b(func_sl_thold_0_b),
|
||
|
.sg(sg_0),
|
||
|
.scin(siv[rd_act_offset]),
|
||
|
.scout(sov[rd_act_offset]),
|
||
|
.din(rd_act_d),
|
||
|
.dout(rd_act_q)
|
||
|
);
|
||
|
|
||
|
tri_rlmreg_p #(.WIDTH(port_bitwidth), .INIT(0), .NEEDS_SRESET(1)) data_out_reg(
|
||
|
.vd(vdd),
|
||
|
.gd(gnd),
|
||
|
.nclk(nclk),
|
||
|
.act(rd_act_q),
|
||
|
.force_t(func_sl_force),
|
||
|
.d_mode(d_mode_dc),
|
||
|
.delay_lclkr(delay_lclkr_dc),
|
||
|
.mpw1_b(mpw1_dc_b),
|
||
|
.mpw2_b(mpw2_dc_b),
|
||
|
.thold_b(func_sl_thold_0_b),
|
||
|
.sg(sg_0),
|
||
|
.scin(siv[data_out_offset:data_out_offset + port_bitwidth - 1]),
|
||
|
.scout(sov[data_out_offset:data_out_offset + port_bitwidth - 1]),
|
||
|
.din(data_out_d),
|
||
|
.dout(data_out_q)
|
||
|
);
|
||
|
|
||
|
assign siv[0:scan_right] = {sov[1:scan_right], func_scan_in};
|
||
|
assign func_scan_out = sov[0];
|
||
|
|
||
|
endmodule
|