correction in version number and date

Signed-off-by: Toshaan Bharvani <toshaan@vantosh.com>

Makefile

@@ -1,6 +1,8 @@
 #!Makefile
 
 HUGO=hugo-extended
+HUGO_NUMWORKERMULTIPLIER=64
+HUGO_MEMORYLIMIT=32
 BUILDNAME:=$(shell git rev-parse --abbrev-ref HEAD)
 BASEURL:=$(shell basename `pwd` | sed 's/_/./g')
 BRANCHES:=$(shell git branch -r | sed 's/origin\///g' | sed 's/pr\//pr-/' | sed '/HEAD/d' | sed '/master/d' | sed '/main/d')
@@ -28,7 +30,7 @@ build-staging:
 
 .PHONY: test
 test: clean
-	$(HUGO) --environment=development --minify --templateMetrics --templateMetricsHints --memstats hug_mem_log
+	HUGO_NUMWORKERMULTIPLIER=$(HUGO_NUMWORKERMULTIPLIER) HUGO_MEMORYLIMIT=$(HUGO_MEMORYLIMIT) $(HUGO) --environment=development --minify --printMemoryUsage --printPathWarnings --printUnusedTemplates --templateMetrics --templateMetricsHints
 
 .PHONY: draft
 draft:

config/_default/config.toml

@@ -22,6 +22,14 @@ enableEmoji = true
 	noJSConfigInAssets = false
 #	useResourceCacheWhen = 'always'
 	writeStats = true
+	[build.buildStats]
+		enable = true
+		disableClasses = false
+		disableIDs = false
+		disableTags = false
+	[[build.cacheBusters]]
+		source = '(postcss|tailwind)\.config\.js'
+		target = '(css|styles|scss|sass)'
 
 [outputs]
 	home = [ "HTML" , "RSS" ]
@@ -141,20 +149,20 @@ enableEmoji = true
 [caches]
 [caches.assets]
 	dir = ':resourceDir/_gen'
-	maxAge = "5m"
+	maxAge = -1
 [caches.getcsv]
 	dir = ':cacheDir/:project'
-	maxAge = "5m"
+	maxAge = -1
 [caches.getjson]
-	 dir = ':cacheDir/:project'
-	maxAge = "5m"
+	dir = ':cacheDir/:project'
+	maxAge = -1
 	ttl = 300
 [caches.getresource]
 	dir = ':cacheDir/:project'
-	maxAge = "5m"
+	maxAge = -1
 [caches.images]
 	dir = ':resourceDir/_gen'
-	maxAge ="5m"
+	maxAge = -1
 [caches.modules]
 	dir = ':cacheDir/modules'
-	maxAge = "5m"
+	maxAge = -1

content/blog/coreboot-on-talos2.md

@@ -0,0 +1,315 @@
+---
+title: coreboot and Heads as an alternative firmware for OpenPOWER Talos II
+author: Krystian Hebel (3mdeb)
+tags:
+  - openpower
+  - power9
+  - firmware
+  - coreboot
+  - hostboot
+date: 2024-10-08
+draft: false
+---
+
+This blog post presents coreboot ([spelled in lower case characters](https://doc.coreboot.org/#spelling-of-coreboot),
+even when it is the first word in a sentence) and Heads as an alternative to
+Hostboot and Skiroot/Petitboot, respectively. The project was extensive, a list
+of changes (incomplete!) can be found in [this issue](https://github.com/linuxboot/heads/issues/1729).
+The work was paid through [Open Collective funds](https://opencollective.com/3mdeb_com)
+and Insurgo personal investments, as well as 3mdeb investment and [NGI0 PET fund](https://nlnet.nl/project/AccessibleSecurity/).
+It took 3 years so far, with results available as part of [Dasharo firmware distribution](https://www.dasharo.com/).
+
+As described on the [project's page](https://coreboot.org),
+
+> coreboot is an extended firmware platform that delivers a lightning fast and
+> secure boot experience on modern computers and embedded systems.
+
+{{< image src="blog/coreboot.png" width="900" height="900" >}}
+
+It aims to do the bare minimum required to make the hardware usable and pass
+the control to next program, called the payload. In case of Talos II, that
+payload is Skiboot, with [few changes on top](https://github.com/Dasharo/skiboot/tree/raptor-cs_talos-2)
+to make it play along with Heads.
+
+Speaking of [Heads](https://github.com/linuxboot/heads), it is:
+
+> a minimal Linux that (...) provides a secure, flexible boot environment for
+laptops, workstations and servers.
+
+Heads provides a bootloader menu that starts final operating system through
+kexec call. This is very similar to what Petitboot does, but Heads puts
+security above everything else.
+
+It is possible to use coreboot without Heads, but not the other way around.
+Heads depends on structures created by coreboot, which just aren't present when
+booting with Hostboot.
+
+## Building and flashing coreboot
+
+To build coreboot image, follow the steps below:
+
+1. Clone the coreboot repository:
+
+    ```
+    git clone https://github.com/Dasharo/coreboot.git \
+       --depth=1 -b raptor-cs_talos-2/rel_v0.7.0
+    ```
+
+2. Start docker container:
+
+    ```
+    cd coreboot
+    docker run --rm -it \
+       -v $PWD:/home/coreboot/coreboot \
+       -w /home/coreboot/coreboot \
+       -u "$(id -u):$(id -g)" \
+       coreboot/coreboot-sdk:0ad5fbd48d /bin/bash
+    ```
+
+3. Configure and start the build process inside of the container:
+
+    ```
+    (docker) cp configs/config.raptor-cs-talos-2 .config
+    (docker) make olddefconfig
+    (docker) make
+    ```
+	
+After image is built you can exit the container, either with `exit` or Ctrl+D.
+To flash it to your platform:
+
+0. Make sure you're running System Package v2.00, if not, get it from
+[here](https://wiki.raptorcs.com/wiki/Talos_II/Firmware) and
+[update/downgrade](https://wiki.raptorcs.com/wiki/Updating_Firmware#Updating_the_OpenPOWER_firmware).
+Start the platform once so SEEPROM is also updated, then power off.
+
+1. Copy images to BMC:
+
+    ```
+    scp -O build/bootblock.signed.ecc root@<BMC_IP>:/tmp/bootblock.signed.ecc
+    scp -O build/coreboot.rom.signed.ecc root@<BMC_IP>:/tmp/coreboot.rom.signed.ecc
+    ```
+
+2. Log in to BMC through SSH:
+
+    ```
+    ssh root@<BMC_IP>
+    ```
+
+3. Flash both partitions:
+
+    ```
+    pflash -e -P HBB -p /tmp/bootblock.signed.ecc
+    pflash -e -P HBI -p /tmp/coreboot.rom.signed.ecc
+    ```
+
+4. Boot the platform as usual and enjoy coreboot running on Talos II:
+
+[![asciicast](https://asciinema.org/a/zkQV1KhxY4n6IrlzssuvFHHS5.svg)]https://asciinema.org/a/zkQV1KhxY4n6IrlzssuvFHHS5
+
+## Building and flashing Heads
+
+Reminder: Heads requires coreboot. Instructions above **must** be performed
+before flashing Heads. It also requires a [compatible USB security dongle](https://osresearch.net/Prerequisites#usb-security-dongles-aka-security-token-aka-smartcard)
+and TPM (more about it later).
+
+> Technically, TPM isn't a hard requirement of Heads, however its usefulness
+> without it is very limited, up to a point where it doesn't have any advantages
+> over Petitboot.
+
+1. Just as earlier, start with cloning the repository:
+
+    ```
+    git clone https://github.com/Dasharo/heads.git \
+       --depth=1 -b raptor-cs_talos-2/release
+    ```
+
+2. Start docker container:
+
+    ```
+    cd heads
+    docker run --rm -it \
+       -v $PWD:/home/heads/heads \
+       -w /home/heads/heads \
+       -u "$(id -u):$(id -g)" \
+       3mdeb/heads-docker:2.4.0 /bin/bash
+    ```
+
+3. Build:
+
+    ```
+    (docker) make BOARD=talos-2
+    ```
+
+This will take a while, wait for it to finish and then exit the container. In
+the process, a coreboot image will also be built, but with slightly different
+configuration. For security and reproducible images, `BUILD_TIMELESS` is always
+enabled. While it actually strips file paths, it also removes file names and
+line numbers from asserts in the code. It makes reporting and debugging
+potential issues harder, so we suggest using coreboot built manually, at least
+for the time being.
+
+Steps for flashing Heads are similar to those done for coreboot.
+
+1. Copy the Heads binary to the BMC (assuming in the Heads root directory):
+
+    ```
+    scp -O build/zImage.bundled root@<BMC_IP>:/tmp/zImage.bundled
+    ```
+
+2. Log in to the BMC:
+
+    ```
+    ssh root@<BMC_IP>
+    ```
+
+3. Flash the BOOTKERNEL partition with Heads:
+
+    ```
+    pflash -e -P BOOTKERNEL -p /tmp/zImage.bundled
+    ```
+
+Answer yes to the prompt and wait for the process to finish. After that, start
+the platform and begin [configuring Heads](https://osresearch.net/Configuring-Keys/).
+
+## PNOR emulation
+
+Flash device can be emulated by BMC, which is something we were often using for
+development and testing. This saves a lot of time which would be spent flashing,
+as well as reduces the wear of flash device.
+
+However, this still requires System Package v2.00, and if this is different than
+what real flash holds, SEEPROM will have to be updated when switching between
+physical and emulated image. Also, this approach doesn't survive BMC reboots and
+power losses. BMC doesn't have enough space to keep full PNOR image in
+non-volatile memory, so `tmpfs` must be used for emulation. Don't try to put
+more than one image in `tmpfs` or BMC **will** run out of RAM, which most likely
+will require manual power cycle.
+
+To start, obtain full flash image, either by downloading it from
+[RaptorCS release page](https://wiki.raptorcs.com/wiki/Talos_II/Firmware) or
+reading from existing image on BMC with:
+
+```
+pflash -r /tmp/talos.pnor
+```
+
+After that, you can "flash" the partitions mentioned earlier by adding
+additional parameters to use the file instead of physical flash:
+
+```
+pflash -f -P <partition> -p <image_file> -F /tmp/talos.pnor
+```
+
+Change `<partition>` to one of `HBB`, `HBI`, `BOOTKERNEL` and `<image_file>` to
+`/tmp/bootblock.signed.ecc`, `/tmp/coreboot.rom.signed.ecc` or
+`/tmp/zImage.bundled`, respectively.
+
+To tell BMC to present the contents of this file as flash, run:
+
+```
+mboxctl --backend file:/tmp/talos.pnor
+```
+
+Sometimes this command fails with a timeout, in that case run it again until it
+succeeds.
+
+> We've noticed that sometimes, despite no error message printed, physical flash
+> was used anyway. It is easy to spot when one copy has Hostboot and the other
+> has coreboot, but it can be missed when both images have different versions of
+> coreboot. It caused us few hours of unnecessary debugging of issues that were
+> already fixed...
+
+With the file now mounted, platform can be started. Host firmware and OS
+shouldn't be able to tell the difference, except for different reported erase
+block size and maybe different access times.
+
+To get back to original flash, run:
+
+```
+mboxctl --backend vpnor
+```
+
+It will report an error (`Failed to post message: Connection timed out`), but
+will revert to physical device nonetheless. This can be confirmed by checking
+the output of `mboxctl --lpc-state`:
+
+```
+root@talos:~# mboxctl --lpc-state
+LPC Bus Maps: Flash Device
+```
+
+Since the file is now the full image with coreboot (and optionally Heads), it
+can be simply written to flash, should you choose to accept it:
+
+```
+pflash -E -p /tmp/talos.pnor
+```
+
+## Noticeable differences between Hostboot and coreboot
+
+For those wondering why we even started this project, here are some of the
+differences between Hostboot and coreboot.
+
+First of all, coreboot uses C, while Hostboot was written in C++. The latter can
+be viewed as a complete operating system - it can use multiple threads
+simultaneously, manages virtual memory and uses memory swapping (even before RAM
+is trained). Each major [istep](https://wiki.raptorcs.com/w/images/b/bd/IPL-Flow-POWER9.pdf)
+(IPL Step, which in turn stands for Initial Program Load) is a separate
+application, with some common dynamically loaded libraries. coreboot, on the
+other hand, runs all of the code in just 3 separate stages - bootblock, romstage
+and ramstage. This allows for tighter linking process, which reduces the final
+size of the code.
+
+Another significant difference is reduced amount of RAS (Reliability,
+Availability, Serviceability) features enabled in coreboot. Talos II is often
+used as a workstation, and while RAS has its uses in servers (it is preferred
+to start with partially working hardware than not starting at all), for home
+users booting fast is usually more important. Because of that coreboot doesn't
+support bad DQ masking for DRAM, it can also optionally skip initial RAM
+scrubbing. Because of these reasons, as well as smaller size of code in general,
+booting coreboot is significantly faster than Hostboot - some preliminary
+results can be found [here](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/user_perspective.md).
+
+Another technical difference is the way data is passed to Skiboot. Hostboot uses
+HDAT - a format specific to this particular firmware. For coreboot, a device
+tree conforming to a well-defined specification is used. In fact, Skiboot
+internally converts HDAT to device tree anyway. At the moment, some information
+is not presented by coreboot (https://github.com/Dasharo/dasharo-issues/issues/446,
+https://github.com/Dasharo/dasharo-issues/issues/32), but those seem to be
+rather cosmetic than anything else - if you know about something that requires
+those pieces of information to be present, let us know.
+
+## TPM
+
+TPM is an integral part of security mechanisms added by Heads. As existing I2C
+TPMs were [hard to obtain](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/tpm_over_i2c.md)
+at the time we were working on this part of the project, and LPC TPMs couldn't
+be used [due to the way POWER9 processor exposed access to LPC bus](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/tpm_over_lpc.md#tpm-over-lpc-interface),
+we had to [consider other options](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/tpm.md).
+
+The solution we ended up with was to create our own [I2C TPM 1.2 module](https://docs.dasharo.com/variants/talos_2/tpm-support/),
+based on Infineon SLB9645TT1.2 chip. This chip isn't supported by drivers in
+Hostboot and upstream Skiboot, to make use of it you have to use coreboot and
+Dasharo's fork of Skiboot.
+
+{{< image src="blog/TPM-1.2-Talos-II.jpg" >}}
+
+## Links and references
+
+Here are some links to documentation related to this project:
+
+- [main user documentation page](https://docs.dasharo.com/variants/talos_2/overview/)
+- [release notes and binaries](https://docs.dasharo.com/variants/talos_2/releases/)
+- [list of known issues](https://github.com/Dasharo/dasharo-issues/labels/raptor-cs_talos-2),
+  if you want to create new issue remember to add proper tag
+- [scripts for dumping debug data and logs](https://github.com/3mdeb/openpower-coreboot-docs/tree/main/devnotes/scripts)
+- [dump of SCOM accesses and other debug output divided by isteps](https://github.com/3mdeb/openpower-coreboot-docs/tree/main/logs/scom_dumps)
+- [other uncategorized developer notes](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes)
+- [Open Source Firmware Slack channel dedicated to coreboot on OpenPOWER](https://osfw.slack.com/archives/C01BHE47JSW)
+
+We invite you to test for yourselves and share the results, both good and bad,
+either on channels listed above or in issue.
+
+The OpenPOWER Talos II running coreboot and heads was presented on Open Source
+Firmware Conference 2024 in Bochum, Germany. Video from the presentaion is
+availabel at [Vimeo](https://vimeo.com/1007701325).

content/events/ibmtechxchange24.md

@@ -0,0 +1,25 @@
+---
+title: "IBM TechXchange 2024"
+eventdates:
+  from: 2024-10-21
+eventplace: San Jose, CA
+register: https://reg.tools.ibm.com/flow/ibm/techxchange24/reg/
+schedule: https://reg.tools.ibm.com/flow/ibm/techxchange24/sessioncatalog/page/sessioncatalog?tab.sessioncatalogtabs=option_1601178495160
+date: 2024-10-17
+draft: false
+---
+
+The OpenPOWER Foundation is participating at [IBM TechXchange 2024 event](https://www.ibm.com/community/ibm-techxchange-conference/). We will be giving a talk on in the OSS track with our member company [Solid Silicon](https://solidsilicon.com/desktop/index.html), who is developing next generation POWER processors. 
+
+Come to our talk on Monday Oct. 21st.
+[Open Comuting Built on OpenPOWER](https://reg.tools.ibm.com/flow/ibm/techxchange24/sessioncatalog/page/sessioncatalog?search=open%20source&tab.sessioncatalogtabs=option_1601178495160#:~:text=computing%20built%20on-,OpenPOWER,-%5B4158%5D)
+
+OpenPOWER will also be showcasing within the IBM POWER booth. Please stop by and say Hello!
+
+
+
+
+
+
+
+

content/events/ocpnasummit2024.md

@@ -0,0 +1,23 @@
+---
+title: "Open Compute North American Summit 2024"
+eventdates:
+  from: 2024-10-15
+eventplace: San Jose, CA
+register: https://2024ocpregional.fnvirtual.app/
+schedule: https://2024ocpregional.fnvirtual.app/a/schedule/
+date: 2024-09-16
+draft: false
+---
+
+The OpenPOWER Foundation is a sponsor with booth #C52. We will be sharing our booth with [Solid Silicon](https://solidsilicon.com/desktop/index.html), who is developing next generation POWER processors. Stop by and say hello!
+
+[OCP24 registration link](https://www.opencompute.org/summit/global-summit/registration)
+
+
+The OCP Summit is the premier event uniting the most forward-thinking minds in open IT Ecosystem development. The Summit presents a unique platform for our Community from around the globe to share their insights, foster partnerships and showcase cutting-edge advancements in open hardware and software.
+
+The 2024 OCP Global Summit theme is "From Ideas to Impact". This encapsulates the transformative journey at the heart of the Open Compute Project. This year's theme reflects OCP's commitment to fostering innovation that transcends theoretical discussions and manifests into real-world solutions. As the pace of technological evolution accelerates and development cycles shorten, our industry is forced to rapidly respond to emerging trends and needs. By harnessing the collective expertise of our global community, we turn visionary ideas into groundbreaking technologies that drive openness, efficiency, sustainability, scalability and growth in the data center industry. Our focus honors the relentless pursuit of progress and the profound impact that OCP's community-driven innovation can achieve. OCP transforms concepts into impactful advancements.
+
+
+
+

content/hub/oregonstateuniversity.md

@@ -84,15 +84,13 @@ operatingsystems:
     - Alma Linux 8
     - Alma Linux 9
     - Alpine
-    - CentOS Stream 8 (GPU)
     - CentOS Stream 9 (GPU)
-    - Debian 10
     - Debian 11
     - Debian 12
     - Fedora [latest]
-    - Ubuntu 18.04
     - Ubuntu 20.04 (GPU)
     - Ubuntu 22.04 (GPU)
+    - Ubuntu 24.04 (GPU)
   unavailable:
 weight: -9000
 date: 2022-08-24

content/members/axiado.md

@@ -5,6 +5,7 @@ country: USA
 link: https://axiado.com
 level: silver
 joined: 2022
+cancelled: 2024-07-05
 date: 2022-10-16
 draft: false
 ---

content/members/axyonai.md

@@ -5,6 +5,7 @@ country: Italy
 link: https://axyon.ai/
 level: silver
 joined: 2019
+cancelled: 2024-07-23
 date: 2021-03-31
 draft: false
 ---

content/members/loyolainstitute.md

@@ -0,0 +1,10 @@
+---
+title: Loyola Institute of Technology
+image: loyolainstitute.png
+country: India
+link: https://www.lit.edu.in/
+level: academic
+joined: 2017
+date: 2021-03-31
+draft: false
+---

content/specifications/isa.md

@@ -2,7 +2,7 @@
 title: "Instruction Set Architecture"
 group: isa
 publicreview: false
-feedback:
+feedbackprocess:
   - title: Request For Change Feedback for "non ISA TWG members"
     description: "This feedback process uses the RFC method, which we divide in 3 types : _minor changes_, _formal proposal_, or _RFC_."
     url: /isarfc/

content/specifications/papr.md

@@ -0,0 +1,32 @@
+---
+title: PowerVM on POWER Architecture Reference
+group: IBM
+tags:
+  - powervm
+  - hypervisor
+  - software
+  - linux
+  - unix
+  - operatingsystem
+  - distribution
+  - architecture
+feedback:
+  queue: PAPR
+date: 2024-10-28
+draft: false
+---
+
+
+## Power Architecture Platform Requirements. ##
+
+The purpose of this document is to detail a stable platform architecture to be used by:
+
+- Platforms defined by the POWER ISA Specification that desire to be compatible with operating systems that run on the PowerVM Hypervisor.
+- Operating systems that desire to be compatible with running on the PowerVM Hypervisor.
+
+This architecture specification provides a comprehensive computer system platform-to-software interface definition.
+It documents minimum system requirements, enabling the development and porting of software to a range of compatible industry-standard computer systems from workstations through servers based on the PowerISA.
+
+
+This document is maintained by IBM and is made available through the OpenPOWER Foundation to support the work of the OpenPOWER Foundation and open source communities in supporting the POWER platform. 
+Comments, questions, and suggestions can be submitted through the OpenPOWER Foundation Request Tracker.

data/specifications/papr.yaml

@@ -0,0 +1,4 @@
+versions:
+  - number: "10.60"
+    date: 2024-11-04
+    download: https://files.openpower.foundation/s/XFgfMaqLMD5Bcm8

themes/openpowerfoundation/layouts/partials/feedbackform.html

@@ -0,0 +1,55 @@
+<script>
+var formname = "form.contactForm";
+var submiturl = "{{ .Site.Params.forms.contact.URI }}";
+{{ if .Site.Params.forms.contact.goal }}
+var goal = "{{ .Site.Params.forms.contact.goal }}";
+{{ end }}
+{{ $feedbackqueue := .Param "feedback.queue" }}
+</script>
+<section id="contact">
+<div class="container"><div class="row wow fadeInUp">
+	<div class="col-lg-12 col-md-12"><div class="form">
+		<div id="sendmessage">Your message has been sent. Thank you!</div>
+		<div id="errormessage">Error</div>
+		<form role="form" name="contactForm" class="contactForm" id="contactForm" action="" method="post">
+			<div class="form-row">
+				<div class="form-group col-lg-12">
+					<input type="text" name="name" class="form-control" id="name" placeholder="Your Name" data-rule="minlen:4" data-msg="Please enter at least 4 characters" />
+					<div class="validation"></div>
+				</div>
+			</div>
+			<div class="form-row">
+				<div class="form-group col-lg-12">
+					<input type="email" class="form-control" name="email" id="email" placeholder="Your Email" data-rule="email" data-msg="Please enter a valid email address" />
+					<div class="validation"></div>
+				</div>
+			</div>
+			<div class="form-row">
+				<div class="form-group col-lg-12">
+					<input type="text" class="form-control" name="subject" id="subject" placeholder="Subject" data-rule="minlen:4" data-msg="Please enter at least 8 characters" />
+					<div class="validation"></div>
+				</div>
+			</div>
+			<div class="form-row">
+				<div class="form-group col-lg-12">
+					<textarea class="form-control" name="message" rows="5" data-rule="required" data-msg="Please write something for us" placeholder="Message"></textarea>
+					<div class="validation"></div>
+				</div>
+			</div>
+			<div class="form-row">
+				<div class="form-group col-lg-12">
+					By submitting this form, I acknowledge that my information is subject
+					to the <a href="{{ "/policy/privacy" | relURL }}">OpenPOWER Foundation's Privacy Policy</a>.
+				</div>
+			</div>
+			<div class="form-row">
+				<div class="form-group col-lg-12 text-center">
+					<input type="hidden" name="contact" value="{{ $feedbackqueue }}" />
+					<input type="hidden" name="url" value="{{ $.Page.RelPermalink | absURL }}" />
+					<button class="btn btn-outline-primary mb-4 mt-4" type="submit" title="Send Message">Send Message</button>
+				</div>
+			</div>
+		</form>
+	</div></div>
+</div></div>
+</section>

themes/openpowerfoundation/layouts/specifications/single.html

@@ -38,14 +38,17 @@
 	<div class="col-lg-3"></div>
 	<div class="col-lg-6 content">
 		<div><p>{{ .Content }}</p></div>
-		{{ if .Param "feedback"}}
-			{{ range $feedback := (.Param "feedback") }}
-				<a href="{{ $feedback.url }}"><div class="feedback btn btn-outline-primary">
-					<h3>{{ $feedback.title }}</h3>
-					{{ $feedback.description | markdownify }}
+		{{ if .Param "feedbackprocess"}}
+			{{ range $feedbackprocess := (.Param "feedbackprocess") }}
+				<a href="{{ $feedbackprocess.url }}"><div class="feedback btn btn-outline-primary">
+					<h3>{{ $feedbackprocess.title }}</h3>
+					{{ $feedbackprocess.description | markdownify }}
 				</div></a><br><br>
 			{{ end }}
 		{{ end }}
+		{{ if .Param "feedback" }}
+			{{ partial "feedbackform.html" . }}
+		{{ end }}
 	</div>
 	<div class="col-lg-3">
 	{{ if .Param "group" }}