]> BSP and SNAP Acceleration Workgroup aclwg-chair@openpowerfoundation.org OpenPower Foundation 2018 OpenPOWER Foundation Revision 1.0_pre1 OpenPOWER Copyright details are filled in by the template. The purpose of this document is to describe how to enable a new customer card on CAPI SNAP framework. SNAP is a open-sourced programming framework for FPGA Acclerations. Its homepage is https://github.com/open-power/snap. With it, you can develop accelerations with Power and CAPI technology easily. This document describes the flow and steps to enable a new PCIe FPGA card to have or CAPI2.0 capability. Firstly, please check whether your PCIe FPGA card is listed on today's "SNAP enabled cards" (On the homepage README of SNAP Github), if not, this document will guide you on how to enable it. Since all of the project files are open-sourced, you can create a Github repository fork, and create a new board support package (BSP) and walk through the entire working flow to enable SNAP. This document is a Workgroup Note owned by the Acceleration Workgroup and handled in compliance with the requirements outlined in the OpenPOWER Foundation Work Group (WG) Process document. It was created using the Master Template Guide version &template_version;. Comments, questions, etc. can be submitted to the public mailing list for this document at capi-snap-doc@mailinglist.openpowerfoundation.org. 2019-03-29 Start from the original Word document