Merge pull request 'coreboot_talos_2' (#61) from miczyg/openpower.foundation:coreboot_talos_2 into master

Reviewed-on: website/openpower.foundation#61 Reviewed-by: James Kulina <jkulina@linuxfoundation.org> Reviewed-by: Toshaan Bharvani <toshaan@vantosh.com>
4 days ago · 55e5e48990
parent 1fa8ebf698 fb964759eb
commit 55e5e48990
3 changed files with 315 additions and 0 deletions
--- a/assets/images/blog/TPM-1.2-Talos-II.jpg
+++ b/assets/images/blog/TPM-1.2-Talos-II.jpg
--- a/assets/images/blog/coreboot.png
+++ b/assets/images/blog/coreboot.png
--- a/content/blog/coreboot-on-talos2.md
+++ b/content/blog/coreboot-on-talos2.md
@ -0,0 +1,315 @@
+---
+title: coreboot and Heads as an alternative firmware for OpenPOWER Talos II
+author: Krystian Hebel (3mdeb)
+tags:
+  - openpower
+  - power9
+  - firmware
+  - coreboot
+  - hostboot
+date: 2024-10-08
+draft: false
+---
+
+This blog post presents coreboot ([spelled in lower case characters](https://doc.coreboot.org/#spelling-of-coreboot),
+even when it is the first word in a sentence) and Heads as an alternative to
+Hostboot and Skiroot/Petitboot, respectively. The project was extensive, a list
+of changes (incomplete!) can be found in [this issue](https://github.com/linuxboot/heads/issues/1729).
+The work was paid through [Open Collective funds](https://opencollective.com/3mdeb_com)
+and Insurgo personal investments, as well as 3mdeb investment and [NGI0 PET fund](https://nlnet.nl/project/AccessibleSecurity/).
+It took 3 years so far, with results available as part of [Dasharo firmware distribution](https://www.dasharo.com/).
+
+As described on the [project's page](https://coreboot.org),
+
+> coreboot is an extended firmware platform that delivers a lightning fast and
+> secure boot experience on modern computers and embedded systems.
+
+{{< image src="blog/coreboot.png" width="900" height="900" >}}
+
+It aims to do the bare minimum required to make the hardware usable and pass
+the control to next program, called the payload. In case of Talos II, that
+payload is Skiboot, with [few changes on top](https://github.com/Dasharo/skiboot/tree/raptor-cs_talos-2)
+to make it play along with Heads.
+
+Speaking of [Heads](https://github.com/linuxboot/heads), it is:
+
+> a minimal Linux that (...) provides a secure, flexible boot environment for
+laptops, workstations and servers.
+
+Heads provides a bootloader menu that starts final operating system through
+kexec call. This is very similar to what Petitboot does, but Heads puts
+security above everything else.
+
+It is possible to use coreboot without Heads, but not the other way around.
+Heads depends on structures created by coreboot, which just aren't present when
+booting with Hostboot.
+
+## Building and flashing coreboot
+
+To build coreboot image, follow the steps below:
+
+1. Clone the coreboot repository:
+
+    ```
+    git clone https://github.com/Dasharo/coreboot.git \
+       --depth=1 -b raptor-cs_talos-2/rel_v0.7.0
+    ```
+
+2. Start docker container:
+
+    ```
+    cd coreboot
+    docker run --rm -it \
+       -v $PWD:/home/coreboot/coreboot \
+       -w /home/coreboot/coreboot \
+       -u "$(id -u):$(id -g)" \
+       coreboot/coreboot-sdk:0ad5fbd48d /bin/bash
+    ```
+
+3. Configure and start the build process inside of the container:
+
+    ```
+    (docker) cp configs/config.raptor-cs-talos-2 .config
+    (docker) make olddefconfig
+    (docker) make
+    ```
+	
+After image is built you can exit the container, either with `exit` or Ctrl+D.
+To flash it to your platform:
+
+0. Make sure you're running System Package v2.00, if not, get it from
+[here](https://wiki.raptorcs.com/wiki/Talos_II/Firmware) and
+[update/downgrade](https://wiki.raptorcs.com/wiki/Updating_Firmware#Updating_the_OpenPOWER_firmware).
+Start the platform once so SEEPROM is also updated, then power off.
+
+1. Copy images to BMC:
+
+    ```
+    scp -O build/bootblock.signed.ecc root@<BMC_IP>:/tmp/bootblock.signed.ecc
+    scp -O build/coreboot.rom.signed.ecc root@<BMC_IP>:/tmp/coreboot.rom.signed.ecc
+    ```
+
+2. Log in to BMC through SSH:
+
+    ```
+    ssh root@<BMC_IP>
+    ```
+
+3. Flash both partitions:
+
+    ```
+    pflash -e -P HBB -p /tmp/bootblock.signed.ecc
+    pflash -e -P HBI -p /tmp/coreboot.rom.signed.ecc
+    ```
+
+4. Boot the platform as usual and enjoy coreboot running on Talos II:
+
+[![asciicast](https://asciinema.org/a/zkQV1KhxY4n6IrlzssuvFHHS5.svg)]https://asciinema.org/a/zkQV1KhxY4n6IrlzssuvFHHS5
+
+## Building and flashing Heads
+
+Reminder: Heads requires coreboot. Instructions above **must** be performed
+before flashing Heads. It also requires a [compatible USB security dongle](https://osresearch.net/Prerequisites#usb-security-dongles-aka-security-token-aka-smartcard)
+and TPM (more about it later).
+
+> Technically, TPM isn't a hard requirement of Heads, however its usefulness
+> without it is very limited, up to a point where it doesn't have any advantages
+> over Petitboot.
+
+1. Just as earlier, start with cloning the repository:
+
+    ```
+    git clone https://github.com/Dasharo/heads.git \
+       --depth=1 -b raptor-cs_talos-2/release
+    ```
+
+2. Start docker container:
+
+    ```
+    cd heads
+    docker run --rm -it \
+       -v $PWD:/home/heads/heads \
+       -w /home/heads/heads \
+       -u "$(id -u):$(id -g)" \
+       3mdeb/heads-docker:2.4.0 /bin/bash
+    ```
+
+3. Build:
+
+    ```
+    (docker) make BOARD=talos-2
+    ```
+
+This will take a while, wait for it to finish and then exit the container. In
+the process, a coreboot image will also be built, but with slightly different
+configuration. For security and reproducible images, `BUILD_TIMELESS` is always
+enabled. While it actually strips file paths, it also removes file names and
+line numbers from asserts in the code. It makes reporting and debugging
+potential issues harder, so we suggest using coreboot built manually, at least
+for the time being.
+
+Steps for flashing Heads are similar to those done for coreboot.
+
+1. Copy the Heads binary to the BMC (assuming in the Heads root directory):
+
+    ```
+    scp -O build/zImage.bundled root@<BMC_IP>:/tmp/zImage.bundled
+    ```
+
+2. Log in to the BMC:
+
+    ```
+    ssh root@<BMC_IP>
+    ```
+
+3. Flash the BOOTKERNEL partition with Heads:
+
+    ```
+    pflash -e -P BOOTKERNEL -p /tmp/zImage.bundled
+    ```
+
+Answer yes to the prompt and wait for the process to finish. After that, start
+the platform and begin [configuring Heads](https://osresearch.net/Configuring-Keys/).
+
+## PNOR emulation
+
+Flash device can be emulated by BMC, which is something we were often using for
+development and testing. This saves a lot of time which would be spent flashing,
+as well as reduces the wear of flash device.
+
+However, this still requires System Package v2.00, and if this is different than
+what real flash holds, SEEPROM will have to be updated when switching between
+physical and emulated image. Also, this approach doesn't survive BMC reboots and
+power losses. BMC doesn't have enough space to keep full PNOR image in
+non-volatile memory, so `tmpfs` must be used for emulation. Don't try to put
+more than one image in `tmpfs` or BMC **will** run out of RAM, which most likely
+will require manual power cycle.
+
+To start, obtain full flash image, either by downloading it from
+[RaptorCS release page](https://wiki.raptorcs.com/wiki/Talos_II/Firmware) or
+reading from existing image on BMC with:
+
+```
+pflash -r /tmp/talos.pnor
+```
+
+After that, you can "flash" the partitions mentioned earlier by adding
+additional parameters to use the file instead of physical flash:
+
+```
+pflash -f -P <partition> -p <image_file> -F /tmp/talos.pnor
+```
+
+Change `<partition>` to one of `HBB`, `HBI`, `BOOTKERNEL` and `<image_file>` to
+`/tmp/bootblock.signed.ecc`, `/tmp/coreboot.rom.signed.ecc` or
+`/tmp/zImage.bundled`, respectively.
+
+To tell BMC to present the contents of this file as flash, run:
+
+```
+mboxctl --backend file:/tmp/talos.pnor
+```
+
+Sometimes this command fails with a timeout, in that case run it again until it
+succeeds.
+
+> We've noticed that sometimes, despite no error message printed, physical flash
+> was used anyway. It is easy to spot when one copy has Hostboot and the other
+> has coreboot, but it can be missed when both images have different versions of
+> coreboot. It caused us few hours of unnecessary debugging of issues that were
+> already fixed...
+
+With the file now mounted, platform can be started. Host firmware and OS
+shouldn't be able to tell the difference, except for different reported erase
+block size and maybe different access times.
+
+To get back to original flash, run:
+
+```
+mboxctl --backend vpnor
+```
+
+It will report an error (`Failed to post message: Connection timed out`), but
+will revert to physical device nonetheless. This can be confirmed by checking
+the output of `mboxctl --lpc-state`:
+
+```
+root@talos:~# mboxctl --lpc-state
+LPC Bus Maps: Flash Device
+```
+
+Since the file is now the full image with coreboot (and optionally Heads), it
+can be simply written to flash, should you choose to accept it:
+
+```
+pflash -E -p /tmp/talos.pnor
+```
+
+## Noticeable differences between Hostboot and coreboot
+
+For those wondering why we even started this project, here are some of the
+differences between Hostboot and coreboot.
+
+First of all, coreboot uses C, while Hostboot was written in C++. The latter can
+be viewed as a complete operating system - it can use multiple threads
+simultaneously, manages virtual memory and uses memory swapping (even before RAM
+is trained). Each major [istep](https://wiki.raptorcs.com/w/images/b/bd/IPL-Flow-POWER9.pdf)
+(IPL Step, which in turn stands for Initial Program Load) is a separate
+application, with some common dynamically loaded libraries. coreboot, on the
+other hand, runs all of the code in just 3 separate stages - bootblock, romstage
+and ramstage. This allows for tighter linking process, which reduces the final
+size of the code.
+
+Another significant difference is reduced amount of RAS (Reliability,
+Availability, Serviceability) features enabled in coreboot. Talos II is often
+used as a workstation, and while RAS has its uses in servers (it is preferred
+to start with partially working hardware than not starting at all), for home
+users booting fast is usually more important. Because of that coreboot doesn't
+support bad DQ masking for DRAM, it can also optionally skip initial RAM
+scrubbing. Because of these reasons, as well as smaller size of code in general,
+booting coreboot is significantly faster than Hostboot - some preliminary
+results can be found [here](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/user_perspective.md).
+
+Another technical difference is the way data is passed to Skiboot. Hostboot uses
+HDAT - a format specific to this particular firmware. For coreboot, a device
+tree conforming to a well-defined specification is used. In fact, Skiboot
+internally converts HDAT to device tree anyway. At the moment, some information
+is not presented by coreboot (https://github.com/Dasharo/dasharo-issues/issues/446,
+https://github.com/Dasharo/dasharo-issues/issues/32), but those seem to be
+rather cosmetic than anything else - if you know about something that requires
+those pieces of information to be present, let us know.
+
+## TPM
+
+TPM is an integral part of security mechanisms added by Heads. As existing I2C
+TPMs were [hard to obtain](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/tpm_over_i2c.md)
+at the time we were working on this part of the project, and LPC TPMs couldn't
+be used [due to the way POWER9 processor exposed access to LPC bus](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/tpm_over_lpc.md#tpm-over-lpc-interface),
+we had to [consider other options](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/tpm.md).
+
+The solution we ended up with was to create our own [I2C TPM 1.2 module](https://docs.dasharo.com/variants/talos_2/tpm-support/),
+based on Infineon SLB9645TT1.2 chip. This chip isn't supported by drivers in
+Hostboot and upstream Skiboot, to make use of it you have to use coreboot and
+Dasharo's fork of Skiboot.
+
+{{< image src="blog/TPM-1.2-Talos-II.jpg" >}}
+
+## Links and references
+
+Here are some links to documentation related to this project:
+
+- [main user documentation page](https://docs.dasharo.com/variants/talos_2/overview/)
+- [release notes and binaries](https://docs.dasharo.com/variants/talos_2/releases/)
+- [list of known issues](https://github.com/Dasharo/dasharo-issues/labels/raptor-cs_talos-2),
+  if you want to create new issue remember to add proper tag
+- [scripts for dumping debug data and logs](https://github.com/3mdeb/openpower-coreboot-docs/tree/main/devnotes/scripts)
+- [dump of SCOM accesses and other debug output divided by isteps](https://github.com/3mdeb/openpower-coreboot-docs/tree/main/logs/scom_dumps)
+- [other uncategorized developer notes](https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes)
+- [Open Source Firmware Slack channel dedicated to coreboot on OpenPOWER](https://osfw.slack.com/archives/C01BHE47JSW)
+
+We invite you to test for yourselves and share the results, both good and bad,
+either on channels listed above or in issue.
+
+The OpenPOWER Talos II running coreboot and heads was presented on Open Source
+Firmware Conference 2024 in Bochum, Germany. Video from the presentaion is
+availabel at [Vimeo](https://vimeo.com/1007701325).