microwatt

A tiny Open POWER ISA softcore written in VHDL 2008

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Paul Mackerras dee3783d79 MMU: Remove software-loaded dTLB mode This removes the hack where the tlbie instruction could be used to load entries directly into the dTLB, because we don't report the correct DSISR values for accesses that hit software-loaded dTLB entries and have privilege or permission errors. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>		5 years ago
constraints	…
fpga	…
hello_world	Merge remote-tracking branch 'remotes/origin/master'	5 years ago
media	…
micropython	…
openocd	…
rust_lib_demo	Merge remote-tracking branch 'remotes/origin/master'	5 years ago
scripts	mw_debug: Add support for reading GSPRs and writing memory	5 years ago
sim-unisim	…
tests	Merge remote-tracking branch 'remotes/origin/master'	5 years ago
.gitignore	…
.travis.yml	…
LICENSE	…
Makefile	Add framework for implementing an MMU	5 years ago
Makefile.synth	…
README.md	Change the default cross compiler prefix to powerpc64le-linux-gnu-	5 years ago
cache_ram.vhdl	…
common.vhdl	MMU: Refetch PTE on access fault	5 years ago
control.vhdl	…
core.vhdl	Add framework for implementing an MMU	5 years ago
core_debug.vhdl	debug: Provide a way to examine GPRs, fast SPRs and MSR	5 years ago
core_tb.vhdl	…
countzero.vhdl	…
countzero_tb.vhdl	…
cr_file.vhdl	…
cr_hazard.vhdl	…
crhelpers.vhdl	…
dcache.vhdl	MMU: Remove software-loaded dTLB mode	5 years ago
dcache_tb.vhdl	Add framework for implementing an MMU	5 years ago
decode1.vhdl	MMU: Implement radix page table machinery	5 years ago
decode2.vhdl	debug: Provide a way to examine GPRs, fast SPRs and MSR	5 years ago
decode_types.vhdl	dcache: Implement data TLB	5 years ago
divider.vhdl	…
divider_tb.vhdl	…
dmi_dtm_dummy.vhdl	…
dmi_dtm_tb.vhdl	…
dmi_dtm_xilinx.vhdl	…
execute1.vhdl	MMU: Implement data segment interrupts	5 years ago
fetch1.vhdl	…
fetch2.vhdl	…
glibc_random.vhdl	…
glibc_random_helpers.vhdl	…
gpr_hazard.vhdl	…
helpers.vhdl	…
icache.vhdl	…
icache_tb.vhdl	…
icache_test.bin	…
insn_helpers.vhdl	…
loadstore1.vhdl	MMU: Refetch PTE on access fault	5 years ago
logical.vhdl	…
microwatt.core	Add framework for implementing an MMU	5 years ago
mmu.vhdl	MMU: Refetch PTE on access fault	5 years ago
multiply.vhdl	…
multiply_tb.vhdl	…
plru.vhdl	…
plru_tb.vhdl	…
ppc_fx_insns.vhdl	…
register_file.vhdl	debug: Provide a way to examine GPRs, fast SPRs and MSR	5 years ago
rotator.vhdl	Implement the extswsli instruction	5 years ago
rotator_tb.vhdl	Implement the extswsli instruction	5 years ago
sim_bram.vhdl	…
sim_bram_helpers.vhdl	…
sim_bram_helpers_c.c	…
sim_console.vhdl	…
sim_console_c.c	…
sim_jtag.vhdl	…
sim_jtag_socket.vhdl	…
sim_jtag_socket_c.c	…
sim_uart.vhdl	…
sim_vhpi_c.c	…
sim_vhpi_c.h	…
soc.vhdl	…
utils.vhdl	…
wishbone_arbiter.vhdl	…
wishbone_bram_tb.bin	…
wishbone_bram_tb.vhdl	…
wishbone_bram_wrapper.vhdl	…
wishbone_debug_master.vhdl	wishbone_debug_master: Fix address auto-increment for memory writes	5 years ago
wishbone_types.vhdl	…
writeback.vhdl	…
xics.vhdl	…

README.md

Microwatt

A tiny Open POWER ISA softcore written in VHDL 2008. It aims to be simple and easy to understand.

Simulation using ghdl

MicroPython running on Microwatt

You can try out Microwatt/Micropython without hardware by using the ghdl simulator. If you want to build directly for a hardware target board, see below.

Build micropython. If you aren't building on a ppc64le box you will need a cross compiler. If it isn't available on your distro grab the powerpc64le-power8 toolchain from https://toolchains.bootlin.com. You may need to set the CROSS_COMPILE environment variable to the prefix used for your cross compilers. The default is powerpc64le-linux-gnu-.

git clone https://github.com/micropython/micropython.git
cd micropython
cd ports/powerpc
make -j$(nproc)
cd ../../../

A prebuilt micropython image is also available in the micropython/ directory.

Microwatt uses ghdl for simulation. Either install this from your distro or build it. Microwatt requires ghdl to be built with the LLVM or gcc backend, which not all distros do (Fedora does, Debian/Ubuntu appears not to). ghdl with the LLVM backend is likely easier to build.

If building ghdl from scratch is too much for you, the microwatt Makefile supports using Docker or podman images. Read through the Makefile for details.
Next build microwatt:

git clone https://github.com/antonblanchard/microwatt
cd microwatt
make

Link in the micropython image:

ln -s ../micropython/ports/powerpc/build/firmware.bin main_ram.bin

Or if you were using the pre-built image:

ln -s micropython/firmware.bin main_ram.bin

Now run microwatt, sending debug output to /dev/null:

./core_tb > /dev/null

Synthesis on Xilinx FPGAs using Vivado

Install Vivado (I'm using the free 2019.1 webpack edition).
Setup Vivado paths:

source /opt/Xilinx/Vivado/2019.1/settings64.sh

Install FuseSoC:

pip3 install --user -U fusesoc

Fedora users can get FuseSoC package via

sudo dnf copr enable sharkcz/danny
sudo dnf install fusesoc

Create a working directory and point FuseSoC at microwatt:

mkdir microwatt-fusesoc
cd microwatt-fusesoc
fusesoc library add microwatt /path/to/microwatt/

Build using FuseSoC. For hello world (Replace nexys_video with your FPGA board such as --target=arty_a7-100):

fusesoc run --target=nexys_video microwatt --memory_size=16384 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex

You should then be able to see output via the serial port of the board (/dev/ttyUSB1, 115200 for example assuming standard clock speeds). There is a know bug where initial output may not be sent - try the reset (not programming button) on your board if you don't see anything.

To build micropython (currently requires 1MB of BRAM eg an Artix-7 A200):

fusesoc run --target=nexys_video microwatt

Testing

A simple test suite containing random execution test cases and a couple of micropython test cases can be run with:

make -j$(nproc) check

Issues

This is functional, but very simple. We still have quite a lot to do:

There are a few instructions still to be implemented
Need to add caches and bypassing (in progress)
Need to add supervisor state (in progress)