You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/dcache.vhdl

1197 lines
42 KiB
VHDL

--
-- Set associative dcache write-through
--
-- TODO (in no specific order):
--
-- * See list in icache.vhdl
-- * Complete load misses on the cycle when WB data comes instead of
-- at the end of line (this requires dealing with requests coming in
-- while not idle...)
--
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.utils.all;
use work.common.all;
use work.helpers.all;
use work.wishbone_types.all;
entity dcache is
generic (
-- Line size in bytes
LINE_SIZE : positive := 64;
-- Number of lines in a set
NUM_LINES : positive := 32;
-- Number of ways
NUM_WAYS : positive := 4;
-- L1 DTLB entries per set
TLB_SET_SIZE : positive := 64;
-- L1 DTLB number of sets
TLB_NUM_WAYS : positive := 2;
-- L1 DTLB log_2(page_size)
TLB_LG_PGSZ : positive := 12
);
port (
clk : in std_ulogic;
rst : in std_ulogic;
d_in : in Loadstore1ToDcacheType;
d_out : out DcacheToLoadstore1Type;
stall_out : out std_ulogic;
wishbone_out : out wishbone_master_out;
wishbone_in : in wishbone_slave_out
);
end entity dcache;
architecture rtl of dcache is
-- BRAM organisation: We never access more than wishbone_data_bits at
-- a time so to save resources we make the array only that wide, and
-- use consecutive indices for to make a cache "line"
--
-- ROW_SIZE is the width in bytes of the BRAM (based on WB, so 64-bits)
constant ROW_SIZE : natural := wishbone_data_bits / 8;
-- ROW_PER_LINE is the number of row (wishbone transactions) in a line
constant ROW_PER_LINE : natural := LINE_SIZE / ROW_SIZE;
-- BRAM_ROWS is the number of rows in BRAM needed to represent the full
-- dcache
constant BRAM_ROWS : natural := NUM_LINES * ROW_PER_LINE;
-- Bit fields counts in the address
-- REAL_ADDR_BITS is the number of real address bits that we store
constant REAL_ADDR_BITS : positive := 56;
-- ROW_BITS is the number of bits to select a row
constant ROW_BITS : natural := log2(BRAM_ROWS);
-- ROW_LINEBITS is the number of bits to select a row within a line
constant ROW_LINEBITS : natural := log2(ROW_PER_LINE);
-- LINE_OFF_BITS is the number of bits for the offset in a cache line
constant LINE_OFF_BITS : natural := log2(LINE_SIZE);
-- ROW_OFF_BITS is the number of bits for the offset in a row
constant ROW_OFF_BITS : natural := log2(ROW_SIZE);
-- INDEX_BITS is the number if bits to select a cache line
constant INDEX_BITS : natural := log2(NUM_LINES);
-- SET_SIZE_BITS is the log base 2 of the set size
constant SET_SIZE_BITS : natural := LINE_OFF_BITS + INDEX_BITS;
-- TAG_BITS is the number of bits of the tag part of the address
constant TAG_BITS : natural := REAL_ADDR_BITS - SET_SIZE_BITS;
-- WAY_BITS is the number of bits to select a way
constant WAY_BITS : natural := log2(NUM_WAYS);
-- Example of layout for 32 lines of 64 bytes:
--
-- .. tag |index| line |
-- .. | row | |
-- .. | |---| | ROW_LINEBITS (3)
-- .. | |--- - --| LINE_OFF_BITS (6)
-- .. | |- --| ROW_OFF_BITS (3)
-- .. |----- ---| | ROW_BITS (8)
-- .. |-----| | INDEX_BITS (5)
-- .. --------| | TAG_BITS (45)
subtype row_t is integer range 0 to BRAM_ROWS-1;
subtype index_t is integer range 0 to NUM_LINES-1;
subtype way_t is integer range 0 to NUM_WAYS-1;
-- The cache data BRAM organized as described above for each way
subtype cache_row_t is std_ulogic_vector(wishbone_data_bits-1 downto 0);
-- The cache tags LUTRAM has a row per set. Vivado is a pain and will
-- not handle a clean (commented) definition of the cache tags as a 3d
-- memory. For now, work around it by putting all the tags
subtype cache_tag_t is std_logic_vector(TAG_BITS-1 downto 0);
-- type cache_tags_set_t is array(way_t) of cache_tag_t;
-- type cache_tags_array_t is array(index_t) of cache_tags_set_t;
constant TAG_RAM_WIDTH : natural := TAG_BITS * NUM_WAYS;
subtype cache_tags_set_t is std_logic_vector(TAG_RAM_WIDTH-1 downto 0);
type cache_tags_array_t is array(index_t) of cache_tags_set_t;
-- The cache valid bits
subtype cache_way_valids_t is std_ulogic_vector(NUM_WAYS-1 downto 0);
type cache_valids_t is array(index_t) of cache_way_valids_t;
-- Storage. Hopefully "cache_rows" is a BRAM, the rest is LUTs
signal cache_tags : cache_tags_array_t;
signal cache_valids : cache_valids_t;
attribute ram_style : string;
attribute ram_style of cache_tags : signal is "distributed";
-- L1 TLB.
constant TLB_SET_BITS : natural := log2(TLB_SET_SIZE);
constant TLB_WAY_BITS : natural := log2(TLB_NUM_WAYS);
constant TLB_EA_TAG_BITS : natural := 64 - (TLB_LG_PGSZ + TLB_SET_BITS);
constant TLB_TAG_WAY_BITS : natural := TLB_NUM_WAYS * TLB_EA_TAG_BITS;
constant TLB_PTE_BITS : natural := 64;
constant TLB_PTE_WAY_BITS : natural := TLB_NUM_WAYS * TLB_PTE_BITS;
subtype tlb_way_t is integer range 0 to TLB_NUM_WAYS - 1;
subtype tlb_index_t is integer range 0 to TLB_SET_SIZE - 1;
subtype tlb_way_valids_t is std_ulogic_vector(TLB_NUM_WAYS-1 downto 0);
type tlb_valids_t is array(tlb_index_t) of tlb_way_valids_t;
subtype tlb_tag_t is std_ulogic_vector(TLB_EA_TAG_BITS - 1 downto 0);
subtype tlb_way_tags_t is std_ulogic_vector(TLB_TAG_WAY_BITS-1 downto 0);
type tlb_tags_t is array(tlb_index_t) of tlb_way_tags_t;
subtype tlb_pte_t is std_ulogic_vector(TLB_PTE_BITS - 1 downto 0);
subtype tlb_way_ptes_t is std_ulogic_vector(TLB_PTE_WAY_BITS-1 downto 0);
type tlb_ptes_t is array(tlb_index_t) of tlb_way_ptes_t;
type hit_way_set_t is array(tlb_way_t) of way_t;
signal dtlb_valids : tlb_valids_t;
signal dtlb_tags : tlb_tags_t;
signal dtlb_ptes : tlb_ptes_t;
attribute ram_style of dtlb_tags : signal is "distributed";
attribute ram_style of dtlb_ptes : signal is "distributed";
signal r0 : Loadstore1ToDcacheType;
signal r0_valid : std_ulogic;
-- Record for storing permission, attribute, etc. bits from a PTE
type perm_attr_t is record
reference : std_ulogic;
changed : std_ulogic;
nocache : std_ulogic;
priv : std_ulogic;
rd_perm : std_ulogic;
wr_perm : std_ulogic;
end record;
function extract_perm_attr(pte : std_ulogic_vector(TLB_PTE_BITS - 1 downto 0)) return perm_attr_t is
variable pa : perm_attr_t;
begin
pa.reference := pte(8);
pa.changed := pte(7);
pa.nocache := pte(5);
pa.priv := pte(3);
pa.rd_perm := pte(2);
pa.wr_perm := pte(1);
return pa;
end;
constant real_mode_perm_attr : perm_attr_t := (nocache => '0', others => '1');
-- Type of operation on a "valid" input
type op_t is (OP_NONE,
OP_LOAD_HIT, -- Cache hit on load
OP_LOAD_MISS, -- Load missing cache
OP_LOAD_NC, -- Non-cachable load
OP_BAD, -- BAD: Cache hit on NC load/store
OP_STORE_HIT, -- Store hitting cache
OP_STORE_MISS); -- Store missing cache
-- Cache state machine
type state_t is (IDLE, -- Normal load hit processing
RELOAD_WAIT_ACK, -- Cache reload wait ack
FINISH_LD_MISS, -- Extra cycle after load miss
STORE_WAIT_ACK, -- Store wait ack
NC_LOAD_WAIT_ACK);-- Non-cachable load wait ack
--
-- Dcache operations:
--
-- In order to make timing, we use the BRAMs with an output buffer,
-- which means that the BRAM output is delayed by an extra cycle.
--
-- Thus, the dcache has a 2-stage internal pipeline for cache hits
-- with no stalls.
--
-- All other operations are handled via stalling in the first stage.
--
-- The second stage can thus complete a hit at the same time as the
-- first stage emits a stall for a complex op.
--
-- First stage register, contains state for stage 1 of load hits
-- and for the state machine used by all other operations
--
type reg_stage_1_t is record
-- Latch the complete request from ls1
req : Loadstore1ToDcacheType;
-- Cache hit state
hit_way : way_t;
hit_load_valid : std_ulogic;
-- Data buffer for "slow" read ops (load miss and NC loads).
slow_data : std_ulogic_vector(63 downto 0);
slow_valid : std_ulogic;
-- Signal to complete a failed stcx.
stcx_fail : std_ulogic;
-- Cache miss state (reload state machine)
state : state_t;
wb : wishbone_master_out;
store_way : way_t;
store_row : row_t;
store_index : index_t;
-- Signals to complete with error
error_done : std_ulogic;
tlb_miss : std_ulogic; -- No entry found in TLB
perm_error : std_ulogic; -- Permissions don't allow access
rc_error : std_ulogic; -- Reference or change bit clear
-- completion signal for tlbie
tlbie_done : std_ulogic;
end record;
signal r1 : reg_stage_1_t;
-- Reservation information
--
type reservation_t is record
valid : std_ulogic;
addr : std_ulogic_vector(63 downto LINE_OFF_BITS);
end record;
signal reservation : reservation_t;
-- Async signals on incoming request
signal req_index : index_t;
signal req_row : row_t;
signal req_hit_way : way_t;
signal req_tag : cache_tag_t;
signal req_op : op_t;
signal req_data : std_ulogic_vector(63 downto 0);
signal req_laddr : std_ulogic_vector(63 downto 0);
signal early_req_row : row_t;
signal cancel_store : std_ulogic;
signal set_rsrv : std_ulogic;
signal clear_rsrv : std_ulogic;
-- Cache RAM interface
type cache_ram_out_t is array(way_t) of cache_row_t;
signal cache_out : cache_ram_out_t;
-- PLRU output interface
type plru_out_t is array(index_t) of std_ulogic_vector(WAY_BITS-1 downto 0);
signal plru_victim : plru_out_t;
signal replace_way : way_t;
-- Wishbone read/write/cache write formatting signals
signal bus_sel : std_ulogic_vector(7 downto 0);
-- TLB signals
signal tlb_tag_way : tlb_way_tags_t;
signal tlb_pte_way : tlb_way_ptes_t;
signal tlb_valid_way : tlb_way_valids_t;
signal tlb_req_index : tlb_index_t;
signal tlb_hit : std_ulogic;
signal tlb_hit_way : tlb_way_t;
signal pte : tlb_pte_t;
signal ra : std_ulogic_vector(REAL_ADDR_BITS - 1 downto 0);
signal valid_ra : std_ulogic;
signal perm_attr : perm_attr_t;
signal rc_ok : std_ulogic;
signal perm_ok : std_ulogic;
-- TLB PLRU output interface
type tlb_plru_out_t is array(tlb_index_t) of std_ulogic_vector(TLB_WAY_BITS-1 downto 0);
signal tlb_plru_victim : tlb_plru_out_t;
--
-- Helper functions to decode incoming requests
--
-- Return the cache line index (tag index) for an address
function get_index(addr: std_ulogic_vector(63 downto 0)) return index_t is
begin
return to_integer(unsigned(addr(SET_SIZE_BITS - 1 downto LINE_OFF_BITS)));
end;
-- Return the cache row index (data memory) for an address
function get_row(addr: std_ulogic_vector(63 downto 0)) return row_t is
begin
return to_integer(unsigned(addr(SET_SIZE_BITS - 1 downto ROW_OFF_BITS)));
end;
-- Returns whether this is the last row of a line
function is_last_row_addr(addr: wishbone_addr_type) return boolean is
constant ones : std_ulogic_vector(ROW_LINEBITS-1 downto 0) := (others => '1');
begin
return addr(LINE_OFF_BITS-1 downto ROW_OFF_BITS) = ones;
end;
-- Returns whether this is the last row of a line
function is_last_row(row: row_t) return boolean is
variable row_v : std_ulogic_vector(ROW_BITS-1 downto 0);
constant ones : std_ulogic_vector(ROW_LINEBITS-1 downto 0) := (others => '1');
begin
row_v := std_ulogic_vector(to_unsigned(row, ROW_BITS));
return row_v(ROW_LINEBITS-1 downto 0) = ones;
end;
-- Return the address of the next row in the current cache line
function next_row_addr(addr: wishbone_addr_type) return std_ulogic_vector is
variable row_idx : std_ulogic_vector(ROW_LINEBITS-1 downto 0);
variable result : wishbone_addr_type;
begin
-- Is there no simpler way in VHDL to generate that 3 bits adder ?
row_idx := addr(LINE_OFF_BITS-1 downto ROW_OFF_BITS);
row_idx := std_ulogic_vector(unsigned(row_idx) + 1);
result := addr;
result(LINE_OFF_BITS-1 downto ROW_OFF_BITS) := row_idx;
return result;
end;
-- Return the next row in the current cache line. We use a dedicated
-- function in order to limit the size of the generated adder to be
-- only the bits within a cache line (3 bits with default settings)
--
function next_row(row: row_t) return row_t is
variable row_v : std_ulogic_vector(ROW_BITS-1 downto 0);
variable row_idx : std_ulogic_vector(ROW_LINEBITS-1 downto 0);
variable result : std_ulogic_vector(ROW_BITS-1 downto 0);
begin
row_v := std_ulogic_vector(to_unsigned(row, ROW_BITS));
row_idx := row_v(ROW_LINEBITS-1 downto 0);
row_v(ROW_LINEBITS-1 downto 0) := std_ulogic_vector(unsigned(row_idx) + 1);
return to_integer(unsigned(row_v));
end;
-- Get the tag value from the address
function get_tag(addr: std_ulogic_vector(REAL_ADDR_BITS - 1 downto 0)) return cache_tag_t is
begin
return addr(REAL_ADDR_BITS - 1 downto SET_SIZE_BITS);
end;
-- Read a tag from a tag memory row
function read_tag(way: way_t; tagset: cache_tags_set_t) return cache_tag_t is
begin
return tagset((way+1) * TAG_BITS - 1 downto way * TAG_BITS);
end;
-- Write a tag to tag memory row
procedure write_tag(way: in way_t; tagset: inout cache_tags_set_t;
tag: cache_tag_t) is
begin
tagset((way+1) * TAG_BITS - 1 downto way * TAG_BITS) := tag;
end;
-- Read a TLB tag from a TLB tag memory row
function read_tlb_tag(way: tlb_way_t; tags: tlb_way_tags_t) return tlb_tag_t is
variable j : integer;
begin
j := way * TLB_EA_TAG_BITS;
return tags(j + TLB_EA_TAG_BITS - 1 downto j);
end;
-- Write a TLB tag to a TLB tag memory row
procedure write_tlb_tag(way: tlb_way_t; tags: inout tlb_way_tags_t;
tag: tlb_tag_t) is
variable j : integer;
begin
j := way * TLB_EA_TAG_BITS;
tags(j + TLB_EA_TAG_BITS - 1 downto j) := tag;
end;
-- Read a PTE from a TLB PTE memory row
function read_tlb_pte(way: tlb_way_t; ptes: tlb_way_ptes_t) return tlb_pte_t is
variable j : integer;
begin
j := way * TLB_PTE_BITS;
return ptes(j + TLB_PTE_BITS - 1 downto j);
end;
procedure write_tlb_pte(way: tlb_way_t; ptes: inout tlb_way_ptes_t; newpte: tlb_pte_t) is
variable j : integer;
begin
j := way * TLB_PTE_BITS;
ptes(j + TLB_PTE_BITS - 1 downto j) := newpte;
end;
begin
assert LINE_SIZE mod ROW_SIZE = 0 report "LINE_SIZE not multiple of ROW_SIZE" severity FAILURE;
assert ispow2(LINE_SIZE) report "LINE_SIZE not power of 2" severity FAILURE;
assert ispow2(NUM_LINES) report "NUM_LINES not power of 2" severity FAILURE;
assert ispow2(ROW_PER_LINE) report "ROW_PER_LINE not power of 2" severity FAILURE;
assert (ROW_BITS = INDEX_BITS + ROW_LINEBITS)
report "geometry bits don't add up" severity FAILURE;
assert (LINE_OFF_BITS = ROW_OFF_BITS + ROW_LINEBITS)
report "geometry bits don't add up" severity FAILURE;
assert (REAL_ADDR_BITS = TAG_BITS + INDEX_BITS + LINE_OFF_BITS)
report "geometry bits don't add up" severity FAILURE;
assert (REAL_ADDR_BITS = TAG_BITS + ROW_BITS + ROW_OFF_BITS)
report "geometry bits don't add up" severity FAILURE;
assert (64 = wishbone_data_bits)
report "Can't yet handle a wishbone width that isn't 64-bits" severity FAILURE;
-- Latch the request in r0 as long as we're not stalling
stage_0 : process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
r0.valid <= '0';
elsif stall_out = '0' then
r0 <= d_in;
end if;
end if;
end process;
-- Hold off the request in r0 when stalling,
-- and cancel it if we get an error in a previous request.
r0_valid <= r0.valid and not stall_out and not r1.error_done;
-- TLB
-- Operates in the second cycle on the request latched in r0.
-- TLB updates write the entry at the end of the second cycle.
tlb_read : process(clk)
variable index : tlb_index_t;
begin
if rising_edge(clk) then
if stall_out = '1' then
-- keep reading the same thing while stalled
index := tlb_req_index;
else
index := to_integer(unsigned(d_in.addr(TLB_LG_PGSZ + TLB_SET_BITS - 1
downto TLB_LG_PGSZ)));
end if;
tlb_valid_way <= dtlb_valids(index);
tlb_tag_way <= dtlb_tags(index);
tlb_pte_way <= dtlb_ptes(index);
end if;
end process;
-- Generate TLB PLRUs
maybe_tlb_plrus: if TLB_NUM_WAYS > 1 generate
begin
tlb_plrus: for i in 0 to TLB_SET_SIZE - 1 generate
-- TLB PLRU interface
signal tlb_plru_acc : std_ulogic_vector(TLB_WAY_BITS-1 downto 0);
signal tlb_plru_acc_en : std_ulogic;
signal tlb_plru_out : std_ulogic_vector(TLB_WAY_BITS-1 downto 0);
begin
tlb_plru : entity work.plru
generic map (
BITS => TLB_WAY_BITS
)
port map (
clk => clk,
rst => rst,
acc => tlb_plru_acc,
acc_en => tlb_plru_acc_en,
lru => tlb_plru_out
);
process(tlb_req_index, tlb_hit, tlb_hit_way, tlb_plru_out)
begin
-- PLRU interface
if tlb_hit = '1' and tlb_req_index = i then
tlb_plru_acc_en <= '1';
else
tlb_plru_acc_en <= '0';
end if;
tlb_plru_acc <= std_ulogic_vector(to_unsigned(tlb_hit_way, TLB_WAY_BITS));
tlb_plru_victim(i) <= tlb_plru_out;
end process;
end generate;
end generate;
tlb_search : process(all)
variable hitway : tlb_way_t;
variable hit : std_ulogic;
variable eatag : tlb_tag_t;
begin
tlb_req_index <= to_integer(unsigned(r0.addr(TLB_LG_PGSZ + TLB_SET_BITS - 1
downto TLB_LG_PGSZ)));
hitway := 0;
hit := '0';
eatag := r0.addr(63 downto TLB_LG_PGSZ + TLB_SET_BITS);
for i in tlb_way_t loop
if tlb_valid_way(i) = '1' and
read_tlb_tag(i, tlb_tag_way) = eatag then
hitway := i;
hit := '1';
end if;
end loop;
tlb_hit <= hit and r0_valid;
tlb_hit_way <= hitway;
pte <= read_tlb_pte(hitway, tlb_pte_way);
valid_ra <= tlb_hit or not r0.virt_mode;
if r0.virt_mode = '1' then
ra <= pte(REAL_ADDR_BITS - 1 downto TLB_LG_PGSZ) &
r0.addr(TLB_LG_PGSZ - 1 downto 0);
perm_attr <= extract_perm_attr(pte);
else
ra <= r0.addr(REAL_ADDR_BITS - 1 downto 0);
perm_attr <= real_mode_perm_attr;
end if;
end process;
tlb_update : process(clk)
variable tlbie : std_ulogic;
variable tlbia : std_ulogic;
variable tlbwe : std_ulogic;
variable repl_way : tlb_way_t;
variable eatag : tlb_tag_t;
variable tagset : tlb_way_tags_t;
variable pteset : tlb_way_ptes_t;
begin
if rising_edge(clk) then
tlbie := '0';
tlbia := '0';
tlbwe := '0';
if r0_valid = '1' and r0.tlbie = '1' then
if r0.addr(11 downto 10) /= "00" then
tlbia := '1';
elsif r0.addr(9) = '1' then
tlbwe := '1';
else
tlbie := '1';
end if;
end if;
if rst = '1' or tlbia = '1' then
-- clear all valid bits at once
for i in tlb_index_t loop
dtlb_valids(i) <= (others => '0');
end loop;
elsif tlbie = '1' then
if tlb_hit = '1' then
dtlb_valids(tlb_req_index)(tlb_hit_way) <= '0';
end if;
elsif tlbwe = '1' then
if tlb_hit = '1' then
repl_way := tlb_hit_way;
else
repl_way := to_integer(unsigned(tlb_plru_victim(tlb_req_index)));
end if;
eatag := r0.addr(63 downto TLB_LG_PGSZ + TLB_SET_BITS);
tagset := tlb_tag_way;
write_tlb_tag(repl_way, tagset, eatag);
dtlb_tags(tlb_req_index) <= tagset;
pteset := tlb_pte_way;
write_tlb_pte(repl_way, pteset, r0.data);
dtlb_ptes(tlb_req_index) <= pteset;
dtlb_valids(tlb_req_index)(repl_way) <= '1';
end if;
end if;
end process;
-- Generate PLRUs
maybe_plrus: if NUM_WAYS > 1 generate
begin
plrus: for i in 0 to NUM_LINES-1 generate
-- PLRU interface
signal plru_acc : std_ulogic_vector(WAY_BITS-1 downto 0);
signal plru_acc_en : std_ulogic;
signal plru_out : std_ulogic_vector(WAY_BITS-1 downto 0);
begin
plru : entity work.plru
generic map (
BITS => WAY_BITS
)
port map (
clk => clk,
rst => rst,
acc => plru_acc,
acc_en => plru_acc_en,
lru => plru_out
);
process(req_index, req_op, req_hit_way, plru_out)
begin
-- PLRU interface
if (req_op = OP_LOAD_HIT or
req_op = OP_STORE_HIT) and req_index = i then
plru_acc_en <= '1';
else
plru_acc_en <= '0';
end if;
plru_acc <= std_ulogic_vector(to_unsigned(req_hit_way, WAY_BITS));
plru_victim(i) <= plru_out;
end process;
end generate;
end generate;
-- Cache request parsing and hit detection
dcache_request : process(all)
variable is_hit : std_ulogic;
variable hit_way : way_t;
variable op : op_t;
variable opsel : std_ulogic_vector(2 downto 0);
variable go : std_ulogic;
variable nc : std_ulogic;
variable s_hit : std_ulogic;
variable s_tag : cache_tag_t;
variable s_pte : tlb_pte_t;
variable s_ra : std_ulogic_vector(REAL_ADDR_BITS - 1 downto 0);
variable hit_set : std_ulogic_vector(TLB_NUM_WAYS - 1 downto 0);
variable hit_way_set : hit_way_set_t;
begin
-- Extract line, row and tag from request
req_index <= get_index(r0.addr);
req_row <= get_row(r0.addr);
req_tag <= get_tag(ra);
-- Only do anything if not being stalled by stage 1
go := r0_valid and not r0.tlbie;
-- Calculate address of beginning of cache line, will be
-- used for cache miss processing if needed
--
req_laddr <= (63 downto REAL_ADDR_BITS => '0') &
ra(REAL_ADDR_BITS - 1 downto LINE_OFF_BITS) &
(LINE_OFF_BITS-1 downto 0 => '0');
-- Test if pending request is a hit on any way
-- In order to make timing in virtual mode, when we are using the TLB,
-- we compare each way with each of the real addresses from each way of
-- the TLB, and then decide later which match to use.
hit_way := 0;
is_hit := '0';
if r0.virt_mode = '1' then
for j in tlb_way_t loop
hit_way_set(j) := 0;
s_hit := '0';
s_pte := read_tlb_pte(j, tlb_pte_way);
s_ra := s_pte(REAL_ADDR_BITS - 1 downto TLB_LG_PGSZ) &
r0.addr(TLB_LG_PGSZ - 1 downto 0);
s_tag := get_tag(s_ra);
for i in way_t loop
if go = '1' and cache_valids(req_index)(i) = '1' and
read_tag(i, cache_tags(req_index)) = s_tag and
tlb_valid_way(j) = '1' then
hit_way_set(j) := i;
s_hit := '1';
end if;
end loop;
hit_set(j) := s_hit;
end loop;
if tlb_hit = '1' then
is_hit := hit_set(tlb_hit_way);
hit_way := hit_way_set(tlb_hit_way);
end if;
else
s_tag := get_tag(r0.addr(REAL_ADDR_BITS - 1 downto 0));
for i in way_t loop
if go = '1' and cache_valids(req_index)(i) = '1' and
read_tag(i, cache_tags(req_index)) = s_tag then
hit_way := i;
is_hit := '1';
end if;
end loop;
end if;
-- The way that matched on a hit
req_hit_way <= hit_way;
-- The way to replace on a miss
replace_way <= to_integer(unsigned(plru_victim(req_index)));
-- work out whether we have permission for this access
-- NB we don't yet implement AMR, thus no KUAP
rc_ok <= perm_attr.reference and (r0.load or perm_attr.changed);
perm_ok <= (r0.priv_mode or not perm_attr.priv) and
(perm_attr.wr_perm or (r0.load and perm_attr.rd_perm));
-- Combine the request and cache hit status to decide what
-- operation needs to be done
--
nc := r0.nc or perm_attr.nocache;
op := OP_NONE;
if go = '1' then
if valid_ra = '1' and rc_ok = '1' and perm_ok = '1' then
opsel := r0.load & nc & is_hit;
case opsel is
when "101" => op := OP_LOAD_HIT;
when "100" => op := OP_LOAD_MISS;
when "110" => op := OP_LOAD_NC;
when "001" => op := OP_STORE_HIT;
when "000" => op := OP_STORE_MISS;
when "010" => op := OP_STORE_MISS;
when "011" => op := OP_BAD;
when "111" => op := OP_BAD;
when others => op := OP_NONE;
end case;
else
op := OP_BAD;
end if;
end if;
req_op <= op;
-- Version of the row number that is valid one cycle earlier
-- in the cases where we need to read the cache data BRAM.
-- If we're stalling then we need to keep reading the last
-- row requested.
if stall_out = '0' then
early_req_row <= get_row(d_in.addr);
else
early_req_row <= req_row;
end if;
end process;
-- Wire up wishbone request latch out of stage 1
wishbone_out <= r1.wb;
-- Generate stalls from stage 1 state machine
stall_out <= '1' when r1.state /= IDLE else '0';
-- Handle load-with-reservation and store-conditional instructions
reservation_comb: process(all)
begin
cancel_store <= '0';
set_rsrv <= '0';
clear_rsrv <= '0';
if r0_valid = '1' and r0.reserve = '1' then
-- XXX generate alignment interrupt if address is not aligned
-- XXX or if r0.nc = '1'
if r0.load = '1' then
-- load with reservation
set_rsrv <= '1';
else
-- store conditional
clear_rsrv <= '1';
if reservation.valid = '0' or
r0.addr(63 downto LINE_OFF_BITS) /= reservation.addr then
cancel_store <= '1';
end if;
end if;
end if;
end process;
reservation_reg: process(clk)
begin
if rising_edge(clk) then
if rst = '1' or clear_rsrv = '1' then
reservation.valid <= '0';
elsif set_rsrv = '1' then
reservation.valid <= '1';
reservation.addr <= r0.addr(63 downto LINE_OFF_BITS);
end if;
end if;
end process;
-- Return data for loads & completion control logic
--
writeback_control: process(all)
begin
-- The mux on d_out.data defaults to the normal load hit case.
d_out.valid <= '0';
d_out.data <= cache_out(r1.hit_way);
d_out.store_done <= '0';
d_out.error <= '0';
d_out.tlb_miss <= '0';
d_out.perm_error <= '0';
d_out.rc_error <= '0';
-- We have a valid load or store hit or we just completed a slow
-- op such as a load miss, a NC load or a store
--
-- Note: the load hit is delayed by one cycle. However it can still
-- not collide with r.slow_valid (well unless I miscalculated) because
-- slow_valid can only be set on a subsequent request and not on its
-- first cycle (the state machine must have advanced), which makes
-- slow_valid at least 2 cycles from the previous hit_load_valid.
--
-- Sanity: Only one of these must be set in any given cycle
assert (r1.slow_valid and r1.stcx_fail) /= '1' report
"unexpected slow_valid collision with stcx_fail"
severity FAILURE;
assert ((r1.slow_valid or r1.stcx_fail) and r1.hit_load_valid) /= '1' report
"unexpected hit_load_delayed collision with slow_valid"
severity FAILURE;
-- Load hit case is the standard path
if r1.hit_load_valid = '1' then
report "completing load hit";
d_out.valid <= '1';
end if;
-- error cases complete without stalling
if r1.error_done = '1' then
report "completing ld/st with error";
d_out.error <= '1';
d_out.tlb_miss <= r1.tlb_miss;
d_out.perm_error <= r1.perm_error;
d_out.rc_error <= r1.rc_error;
d_out.valid <= '1';
end if;
-- tlbie is handled above and doesn't go through the cache state machine
if r1.tlbie_done = '1' then
report "completing tlbie";
d_out.valid <= '1';
end if;
-- Slow ops (load miss, NC, stores)
if r1.slow_valid = '1' then
-- If it's a load, enable register writeback and switch
-- mux accordingly
--
if r1.req.load then
-- Read data comes from the slow data latch
d_out.data <= r1.slow_data;
end if;
d_out.store_done <= '1';
report "completing store or load miss";
d_out.valid <= '1';
end if;
if r1.stcx_fail = '1' then
d_out.store_done <= '0';
d_out.valid <= '1';
end if;
end process;
--
-- Generate a cache RAM for each way. This handles the normal
-- reads, writes from reloads and the special store-hit update
-- path as well.
--
-- Note: the BRAMs have an extra read buffer, meaning the output
-- is pipelined an extra cycle. This differs from the
-- icache. The writeback logic needs to take that into
-- account by using 1-cycle delayed signals for load hits.
--
rams: for i in 0 to NUM_WAYS-1 generate
signal do_read : std_ulogic;
signal rd_addr : std_ulogic_vector(ROW_BITS-1 downto 0);
signal do_write : std_ulogic;
signal wr_addr : std_ulogic_vector(ROW_BITS-1 downto 0);
signal wr_data : std_ulogic_vector(wishbone_data_bits-1 downto 0);
signal wr_sel : std_ulogic_vector(ROW_SIZE-1 downto 0);
signal dout : cache_row_t;
begin
way: entity work.cache_ram
generic map (
ROW_BITS => ROW_BITS,
WIDTH => wishbone_data_bits,
ADD_BUF => true
)
port map (
clk => clk,
rd_en => do_read,
rd_addr => rd_addr,
rd_data => dout,
wr_en => do_write,
wr_sel => wr_sel,
wr_addr => wr_addr,
wr_data => wr_data
);
process(all)
variable tmp_adr : std_ulogic_vector(63 downto 0);
variable reloading : boolean;
begin
-- Cache hit reads
do_read <= '1';
rd_addr <= std_ulogic_vector(to_unsigned(early_req_row, ROW_BITS));
cache_out(i) <= dout;
-- Write mux:
--
-- Defaults to wishbone read responses (cache refill),
--
-- For timing, the mux on wr_data/sel/addr is not dependent on anything
-- other than the current state. Only the do_write signal is.
--
if r1.state = IDLE then
-- In IDLE state, the only write path is the store-hit update case
wr_addr <= std_ulogic_vector(to_unsigned(req_row, ROW_BITS));
wr_data <= r0.data;
wr_sel <= r0.byte_sel;
else
-- Otherwise, we might be doing a reload or a DCBZ
if r1.req.dcbz = '1' then
wr_data <= (others => '0');
else
wr_data <= wishbone_in.dat;
end if;
wr_sel <= (others => '1');
wr_addr <= std_ulogic_vector(to_unsigned(r1.store_row, ROW_BITS));
end if;
-- The two actual write cases here
do_write <= '0';
reloading := r1.state = RELOAD_WAIT_ACK;
if reloading and wishbone_in.ack = '1' and r1.store_way = i then
do_write <= '1';
end if;
if req_op = OP_STORE_HIT and req_hit_way = i and cancel_store = '0' and
r1.req.dcbz = '0' then
assert not reloading report "Store hit while in state:" &
state_t'image(r1.state)
severity FAILURE;
do_write <= '1';
end if;
end process;
end generate;
--
-- Cache hit synchronous machine for the easy case. This handles load hits.
-- It also handles error cases (TLB miss, cache paradox)
--
dcache_fast_hit : process(clk)
begin
if rising_edge(clk) then
-- If we have a request incoming, we have to latch it as r0.valid
-- is only set for a single cycle. It's up to the control logic to
-- ensure we don't override an uncompleted request (for now we are
-- single issue on load/stores so we are fine, later, we can generate
-- a stall output if necessary).
if req_op /= OP_NONE and stall_out = '0' then
r1.req <= r0;
report "op:" & op_t'image(req_op) &
" addr:" & to_hstring(r0.addr) &
" nc:" & std_ulogic'image(r0.nc) &
" idx:" & integer'image(req_index) &
" tag:" & to_hstring(req_tag) &
" way: " & integer'image(req_hit_way);
end if;
-- Fast path for load/store hits. Set signals for the writeback controls.
if req_op = OP_LOAD_HIT then
r1.hit_way <= req_hit_way;
r1.hit_load_valid <= '1';
else
r1.hit_load_valid <= '0';
end if;
if req_op = OP_BAD then
report "Signalling ld/st error valid_ra=" & " rc_ok=" & std_ulogic'image(rc_ok) &
" perm_ok=" & std_ulogic'image(perm_ok);
r1.error_done <= '1';
r1.tlb_miss <= not valid_ra;
r1.perm_error <= valid_ra and not perm_ok;
r1.rc_error <= valid_ra and perm_ok and not rc_ok;
else
r1.error_done <= '0';
end if;
-- complete tlbies in the third cycle
r1.tlbie_done <= r0_valid and r0.tlbie;
end if;
end process;
--
-- Every other case is handled by this state machine:
--
-- * Cache load miss/reload (in conjunction with "rams")
-- * Load hits for non-cachable forms
-- * Stores (the collision case is handled in "rams")
--
-- All wishbone requests generation is done here. This machine
-- operates at stage 1.
--
dcache_slow : process(clk)
variable tagset : cache_tags_set_t;
variable stbs_done : boolean;
begin
if rising_edge(clk) then
-- On reset, clear all valid bits to force misses
if rst = '1' then
for i in index_t loop
cache_valids(i) <= (others => '0');
end loop;
r1.state <= IDLE;
r1.slow_valid <= '0';
r1.wb.cyc <= '0';
r1.wb.stb <= '0';
-- Not useful normally but helps avoiding tons of sim warnings
r1.wb.adr <= (others => '0');
else
-- One cycle pulses reset
r1.slow_valid <= '0';
r1.stcx_fail <= '0';
-- Main state machine
case r1.state is
when IDLE =>
case req_op is
when OP_LOAD_HIT =>
-- stay in IDLE state
when OP_LOAD_MISS =>
-- Normal load cache miss, start the reload machine
--
report "cache miss addr:" & to_hstring(r0.addr) &
" idx:" & integer'image(req_index) &
" way:" & integer'image(replace_way) &
" tag:" & to_hstring(req_tag);
-- Force misses on that way while reloading that line
cache_valids(req_index)(replace_way) <= '0';
-- Store new tag in selected way
for i in 0 to NUM_WAYS-1 loop
if i = replace_way then
tagset := cache_tags(req_index);
write_tag(i, tagset, req_tag);
cache_tags(req_index) <= tagset;
end if;
end loop;
-- Keep track of our index and way for subsequent stores.
r1.store_index <= req_index;
r1.store_way <= replace_way;
r1.store_row <= get_row(req_laddr);
-- Prep for first wishbone read. We calculate the address of
-- the start of the cache line and start the WB cycle
--
r1.wb.adr <= req_laddr(r1.wb.adr'left downto 0);
r1.wb.sel <= (others => '1');
r1.wb.we <= '0';
r1.wb.cyc <= '1';
r1.wb.stb <= '1';
-- Track that we had one request sent
r1.state <= RELOAD_WAIT_ACK;
when OP_LOAD_NC =>
r1.wb.sel <= r0.byte_sel;
r1.wb.adr <= ra(r1.wb.adr'left downto 3) & "000";
r1.wb.cyc <= '1';
r1.wb.stb <= '1';
r1.wb.we <= '0';
r1.state <= NC_LOAD_WAIT_ACK;
when OP_STORE_HIT | OP_STORE_MISS =>
if r0.dcbz = '0' then
r1.wb.sel <= r0.byte_sel;
r1.wb.adr <= ra(r1.wb.adr'left downto 3) & "000";
r1.wb.dat <= r0.data;
if cancel_store = '0' then
r1.wb.cyc <= '1';
r1.wb.stb <= '1';
r1.wb.we <= '1';
r1.state <= STORE_WAIT_ACK;
else
r1.stcx_fail <= '1';
r1.state <= IDLE;
end if;
else
-- dcbz is handled much like a load miss except
-- that we are writing to memory instead of reading
r1.store_index <= req_index;
r1.store_row <= get_row(req_laddr);
if req_op = OP_STORE_HIT then
r1.store_way <= req_hit_way;
else
r1.store_way <= replace_way;
-- Force misses on the victim way while zeroing
cache_valids(req_index)(replace_way) <= '0';
-- Store new tag in selected way
for i in 0 to NUM_WAYS-1 loop
if i = replace_way then
tagset := cache_tags(req_index);
write_tag(i, tagset, req_tag);
cache_tags(req_index) <= tagset;
end if;
end loop;
end if;
-- Set up for wishbone writes
r1.wb.adr <= req_laddr(r1.wb.adr'left downto 0);
r1.wb.sel <= (others => '1');
r1.wb.we <= '1';
r1.wb.dat <= (others => '0');
r1.wb.cyc <= '1';
r1.wb.stb <= '1';
-- Handle the rest like a load miss
r1.state <= RELOAD_WAIT_ACK;
end if;
-- OP_NONE and OP_BAD do nothing
-- OP_BAD was handled above already
when OP_NONE =>
when OP_BAD =>
end case;
when RELOAD_WAIT_ACK =>
-- Requests are all sent if stb is 0
stbs_done := r1.wb.stb = '0';
-- If we are still sending requests, was one accepted ?
if wishbone_in.stall = '0' and not stbs_done then
-- That was the last word ? We are done sending. Clear
-- stb and set stbs_done so we can handle an eventual last
-- ack on the same cycle.
--
if is_last_row_addr(r1.wb.adr) then
r1.wb.stb <= '0';
stbs_done := true;
end if;
-- Calculate the next row address
r1.wb.adr <= next_row_addr(r1.wb.adr);
end if;
-- Incoming acks processing
if wishbone_in.ack = '1' then
-- Is this the data we were looking for ? Latch it so
-- we can respond later. We don't currently complete the
-- pending miss request immediately, we wait for the
-- whole line to be loaded. The reason is that if we
-- did, we would potentially get new requests in while
-- not idle, which we don't currently know how to deal
-- with.
--
if r1.store_row = get_row(r1.req.addr) and r1.req.dcbz = '0' then
r1.slow_data <= wishbone_in.dat;
end if;
-- Check for completion
if stbs_done and is_last_row(r1.store_row) then
-- Complete wishbone cycle
r1.wb.cyc <= '0';
-- Cache line is now valid
cache_valids(r1.store_index)(r1.store_way) <= '1';
-- Don't complete and go idle until next cycle, in
-- case the next request is for the last dword of
-- the cache line we just loaded.
r1.state <= FINISH_LD_MISS;
end if;
-- Increment store row counter
r1.store_row <= next_row(r1.store_row);
end if;
when FINISH_LD_MISS =>
-- Write back the load data that we got
r1.slow_valid <= '1';
r1.state <= IDLE;
report "completing miss !";
when STORE_WAIT_ACK | NC_LOAD_WAIT_ACK =>
-- Clear stb when slave accepted request
if wishbone_in.stall = '0' then
r1.wb.stb <= '0';
end if;
-- Got ack ? complete.
if wishbone_in.ack = '1' then
if r1.state = NC_LOAD_WAIT_ACK then
r1.slow_data <= wishbone_in.dat;
end if;
r1.state <= IDLE;
r1.slow_valid <= '1';
r1.wb.cyc <= '0';
r1.wb.stb <= '0';
end if;
end case;
end if;
end if;
end process;
end;