forked from cores/microwatt
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
513 lines
18 KiB
VHDL
513 lines
18 KiB
VHDL
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
|
|
library work;
|
|
use work.wishbone_types.all;
|
|
|
|
entity toplevel is
|
|
generic (
|
|
MEMORY_SIZE : integer := 16384;
|
|
RAM_INIT_FILE : string := "firmware.hex";
|
|
RESET_LOW : boolean := true;
|
|
CLK_INPUT : positive := 100000000;
|
|
CLK_FREQUENCY : positive := 100000000;
|
|
HAS_FPU : boolean := true;
|
|
HAS_BTC : boolean := false;
|
|
USE_LITEDRAM : boolean := true;
|
|
NO_BRAM : boolean := true;
|
|
SCLK_STARTUPE2 : boolean := false;
|
|
SPI_FLASH_OFFSET : integer := 4194304;
|
|
SPI_FLASH_DEF_CKDV : natural := 1;
|
|
SPI_FLASH_DEF_QUAD : boolean := true;
|
|
LOG_LENGTH : natural := 0;
|
|
UART_IS_16550 : boolean := true;
|
|
HAS_UART1 : boolean := false;
|
|
USE_LITESDCARD : boolean := true;
|
|
ICACHE_NUM_LINES : natural := 64;
|
|
NGPIO : natural := 0
|
|
);
|
|
port(
|
|
ext_clk : in std_ulogic;
|
|
ext_rst_n : in std_ulogic;
|
|
|
|
-- UART0 signals:
|
|
pin_gpio_0 : out std_ulogic;
|
|
pin_gpio_1 : in std_ulogic;
|
|
|
|
-- LEDs
|
|
led0_b : out std_ulogic;
|
|
led0_g : out std_ulogic;
|
|
led0_r : out std_ulogic;
|
|
|
|
-- SPI
|
|
spi_flash_cs_n : out std_ulogic;
|
|
spi_flash_mosi : inout std_ulogic;
|
|
spi_flash_miso : inout std_ulogic;
|
|
spi_flash_wp_n : inout std_ulogic;
|
|
spi_flash_hold_n : inout std_ulogic;
|
|
|
|
-- SD card wires
|
|
sdcard_data : inout std_ulogic_vector(3 downto 0);
|
|
sdcard_cmd : inout std_ulogic;
|
|
sdcard_clk : out std_ulogic;
|
|
sdcard_cd : in std_ulogic;
|
|
|
|
-- DRAM wires
|
|
ddram_a : out std_ulogic_vector(13 downto 0);
|
|
ddram_ba : out std_ulogic_vector(2 downto 0);
|
|
ddram_ras_n : out std_ulogic;
|
|
ddram_cas_n : out std_ulogic;
|
|
ddram_we_n : out std_ulogic;
|
|
ddram_cs_n : out std_ulogic;
|
|
ddram_dm : out std_ulogic_vector(1 downto 0);
|
|
ddram_dq : inout std_ulogic_vector(15 downto 0);
|
|
ddram_dqs_p : inout std_ulogic_vector(1 downto 0);
|
|
ddram_clk_p : out std_ulogic_vector(0 downto 0);
|
|
-- only the positive differential pin is instantiated
|
|
--ddram_dqs_n : inout std_ulogic_vector(1 downto 0);
|
|
--ddram_clk_n : out std_ulogic_vector(0 downto 0);
|
|
ddram_cke : out std_ulogic;
|
|
ddram_odt : out std_ulogic;
|
|
ddram_reset_n : out std_ulogic;
|
|
|
|
ddram_gnd : out std_ulogic_vector(1 downto 0);
|
|
ddram_vccio : out std_ulogic_vector(5 downto 0)
|
|
);
|
|
end entity toplevel;
|
|
|
|
architecture behaviour of toplevel is
|
|
|
|
-- Reset signals:
|
|
signal soc_rst : std_ulogic;
|
|
signal pll_rst : std_ulogic;
|
|
|
|
-- Internal clock signals:
|
|
signal system_clk : std_ulogic;
|
|
signal system_clk_locked : std_ulogic;
|
|
|
|
-- External IOs from the SoC
|
|
signal wb_ext_io_in : wb_io_master_out;
|
|
signal wb_ext_io_out : wb_io_slave_out;
|
|
signal wb_ext_is_dram_csr : std_ulogic;
|
|
signal wb_ext_is_dram_init : std_ulogic;
|
|
signal wb_ext_is_sdcard : std_ulogic;
|
|
|
|
-- DRAM main data wishbone connection
|
|
signal wb_dram_in : wishbone_master_out;
|
|
signal wb_dram_out : wishbone_slave_out;
|
|
|
|
-- DRAM control wishbone connection
|
|
signal wb_dram_ctrl_out : wb_io_slave_out := wb_io_slave_out_init;
|
|
|
|
-- LiteSDCard connection
|
|
signal ext_irq_sdcard : std_ulogic := '0';
|
|
signal wb_sdcard_out : wb_io_slave_out := wb_io_slave_out_init;
|
|
signal wb_sddma_out : wb_io_master_out := wb_io_master_out_init;
|
|
signal wb_sddma_in : wb_io_slave_out;
|
|
signal wb_sddma_nr : wb_io_master_out;
|
|
signal wb_sddma_ir : wb_io_slave_out;
|
|
-- for conversion from non-pipelined wishbone to pipelined
|
|
signal wb_sddma_stb_sent : std_ulogic;
|
|
|
|
-- Control/status
|
|
signal core_alt_reset : std_ulogic;
|
|
|
|
-- Status LED
|
|
signal led0_b_pwm : std_ulogic;
|
|
signal led0_r_pwm : std_ulogic;
|
|
signal led0_g_pwm : std_ulogic;
|
|
|
|
-- Dumb PWM for the LEDs, those RGB LEDs are too bright otherwise
|
|
signal pwm_counter : std_ulogic_vector(8 downto 0);
|
|
|
|
-- SPI flash
|
|
signal spi_sck : std_ulogic;
|
|
signal spi_cs_n : std_ulogic;
|
|
signal spi_sdat_o : std_ulogic_vector(3 downto 0);
|
|
signal spi_sdat_oe : std_ulogic_vector(3 downto 0);
|
|
signal spi_sdat_i : std_ulogic_vector(3 downto 0);
|
|
|
|
-- GPIO
|
|
signal gpio_in : std_ulogic_vector(NGPIO - 1 downto 0);
|
|
signal gpio_out : std_ulogic_vector(NGPIO - 1 downto 0);
|
|
signal gpio_dir : std_ulogic_vector(NGPIO - 1 downto 0);
|
|
|
|
-- Fixup various memory sizes based on generics
|
|
function get_bram_size return natural is
|
|
begin
|
|
if USE_LITEDRAM and NO_BRAM then
|
|
return 0;
|
|
else
|
|
return MEMORY_SIZE;
|
|
end if;
|
|
end function;
|
|
|
|
function get_payload_size return natural is
|
|
begin
|
|
if USE_LITEDRAM and NO_BRAM then
|
|
return MEMORY_SIZE;
|
|
else
|
|
return 0;
|
|
end if;
|
|
end function;
|
|
|
|
constant BRAM_SIZE : natural := get_bram_size;
|
|
constant PAYLOAD_SIZE : natural := get_payload_size;
|
|
|
|
COMPONENT USRMCLK
|
|
PORT(
|
|
USRMCLKI : IN STD_ULOGIC;
|
|
USRMCLKTS : IN STD_ULOGIC
|
|
);
|
|
END COMPONENT;
|
|
attribute syn_noprune: boolean ;
|
|
attribute syn_noprune of USRMCLK: component is true;
|
|
|
|
begin
|
|
|
|
-- Main SoC
|
|
soc0: entity work.soc
|
|
generic map(
|
|
MEMORY_SIZE => BRAM_SIZE,
|
|
RAM_INIT_FILE => RAM_INIT_FILE,
|
|
SIM => false,
|
|
CLK_FREQ => CLK_FREQUENCY,
|
|
HAS_FPU => HAS_FPU,
|
|
HAS_BTC => HAS_BTC,
|
|
HAS_DRAM => USE_LITEDRAM,
|
|
DRAM_SIZE => 256 * 1024 * 1024,
|
|
DRAM_INIT_SIZE => PAYLOAD_SIZE,
|
|
HAS_SPI_FLASH => true,
|
|
SPI_FLASH_DLINES => 4,
|
|
SPI_FLASH_OFFSET => SPI_FLASH_OFFSET,
|
|
SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV,
|
|
SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD,
|
|
LOG_LENGTH => LOG_LENGTH,
|
|
UART0_IS_16550 => UART_IS_16550,
|
|
HAS_UART1 => HAS_UART1,
|
|
HAS_SD_CARD => USE_LITESDCARD,
|
|
ICACHE_NUM_LINES => ICACHE_NUM_LINES,
|
|
HAS_SHORT_MULT => true,
|
|
NGPIO => NGPIO
|
|
)
|
|
port map (
|
|
-- System signals
|
|
system_clk => system_clk,
|
|
rst => soc_rst,
|
|
|
|
-- UART signals
|
|
uart0_txd => pin_gpio_0,
|
|
uart0_rxd => pin_gpio_1,
|
|
|
|
-- UART1 signals
|
|
--uart1_txd => uart_pmod_tx,
|
|
--uart1_rxd => uart_pmod_rx,
|
|
|
|
-- SPI signals
|
|
spi_flash_sck => spi_sck,
|
|
spi_flash_cs_n => spi_cs_n,
|
|
spi_flash_sdat_o => spi_sdat_o,
|
|
spi_flash_sdat_oe => spi_sdat_oe,
|
|
spi_flash_sdat_i => spi_sdat_i,
|
|
|
|
-- GPIO signals
|
|
gpio_in => gpio_in,
|
|
gpio_out => gpio_out,
|
|
gpio_dir => gpio_dir,
|
|
|
|
-- External interrupts
|
|
ext_irq_sdcard => ext_irq_sdcard,
|
|
|
|
-- DRAM wishbone
|
|
wb_dram_in => wb_dram_in,
|
|
wb_dram_out => wb_dram_out,
|
|
|
|
-- IO wishbone
|
|
wb_ext_io_in => wb_ext_io_in,
|
|
wb_ext_io_out => wb_ext_io_out,
|
|
wb_ext_is_dram_csr => wb_ext_is_dram_csr,
|
|
wb_ext_is_dram_init => wb_ext_is_dram_init,
|
|
wb_ext_is_sdcard => wb_ext_is_sdcard,
|
|
|
|
-- DMA wishbone
|
|
wishbone_dma_in => wb_sddma_in,
|
|
wishbone_dma_out => wb_sddma_out,
|
|
|
|
alt_reset => core_alt_reset
|
|
);
|
|
|
|
-- SPI Flash
|
|
--
|
|
spi_flash_cs_n <= spi_cs_n;
|
|
spi_flash_mosi <= spi_sdat_o(0) when spi_sdat_oe(0) = '1' else 'Z';
|
|
spi_flash_miso <= spi_sdat_o(1) when spi_sdat_oe(1) = '1' else 'Z';
|
|
spi_flash_wp_n <= spi_sdat_o(2) when spi_sdat_oe(2) = '1' else 'Z';
|
|
spi_flash_hold_n <= spi_sdat_o(3) when spi_sdat_oe(3) = '1' else 'Z';
|
|
spi_sdat_i(0) <= spi_flash_mosi;
|
|
spi_sdat_i(1) <= spi_flash_miso;
|
|
spi_sdat_i(2) <= spi_flash_wp_n;
|
|
spi_sdat_i(3) <= spi_flash_hold_n;
|
|
|
|
uclk: USRMCLK port map (
|
|
USRMCLKI => spi_sck,
|
|
USRMCLKTS => '0'
|
|
);
|
|
|
|
nodram: if not USE_LITEDRAM generate
|
|
signal ddram_clk_dummy : std_ulogic;
|
|
begin
|
|
reset_controller: entity work.soc_reset
|
|
generic map(
|
|
RESET_LOW => RESET_LOW
|
|
)
|
|
port map(
|
|
ext_clk => ext_clk,
|
|
pll_clk => system_clk,
|
|
pll_locked_in => system_clk_locked,
|
|
ext_rst_in => ext_rst_n,
|
|
pll_rst_out => pll_rst,
|
|
rst_out => soc_rst
|
|
);
|
|
|
|
clkgen: entity work.clock_generator
|
|
generic map(
|
|
CLK_INPUT_HZ => CLK_INPUT,
|
|
CLK_OUTPUT_HZ => CLK_FREQUENCY
|
|
)
|
|
port map(
|
|
ext_clk => ext_clk,
|
|
pll_rst_in => pll_rst,
|
|
pll_clk_out => system_clk,
|
|
pll_locked_out => system_clk_locked
|
|
);
|
|
|
|
led0_b_pwm <= '1';
|
|
led0_r_pwm <= '1';
|
|
led0_g_pwm <= '0';
|
|
core_alt_reset <= '0';
|
|
|
|
end generate;
|
|
|
|
has_dram: if USE_LITEDRAM generate
|
|
signal dram_init_done : std_ulogic;
|
|
signal dram_init_error : std_ulogic;
|
|
signal dram_sys_rst : std_ulogic;
|
|
signal rst_gen_rst : std_ulogic;
|
|
begin
|
|
|
|
-- Eventually dig out the frequency from
|
|
-- litesdram generate.py sys_clk_freq
|
|
-- but for now, assert it's 48Mhz for orangecrab
|
|
assert CLK_FREQUENCY = 48000000;
|
|
|
|
reset_controller: entity work.soc_reset
|
|
generic map(
|
|
RESET_LOW => RESET_LOW,
|
|
PLL_RESET_BITS => 18,
|
|
SOC_RESET_BITS => 1
|
|
)
|
|
port map(
|
|
ext_clk => ext_clk,
|
|
pll_clk => system_clk,
|
|
pll_locked_in => system_clk_locked,
|
|
ext_rst_in => ext_rst_n,
|
|
pll_rst_out => pll_rst,
|
|
rst_out => rst_gen_rst
|
|
);
|
|
|
|
-- Generate SoC reset
|
|
soc_rst_gen: process(system_clk)
|
|
begin
|
|
if ext_rst_n = '0' then
|
|
soc_rst <= '1';
|
|
elsif rising_edge(system_clk) then
|
|
soc_rst <= dram_sys_rst or not system_clk_locked;
|
|
end if;
|
|
end process;
|
|
|
|
dram: entity work.litedram_wrapper
|
|
generic map(
|
|
DRAM_ABITS => 24,
|
|
DRAM_ALINES => 14,
|
|
DRAM_DLINES => 16,
|
|
DRAM_CKLINES => 1,
|
|
DRAM_PORT_WIDTH => 128,
|
|
NUM_LINES => 8, -- reduce from default of 64 to make smaller/timing
|
|
PAYLOAD_FILE => RAM_INIT_FILE,
|
|
PAYLOAD_SIZE => PAYLOAD_SIZE
|
|
)
|
|
port map(
|
|
clk_in => ext_clk,
|
|
rst => pll_rst,
|
|
system_clk => system_clk,
|
|
system_reset => dram_sys_rst,
|
|
core_alt_reset => core_alt_reset,
|
|
pll_locked => system_clk_locked,
|
|
|
|
wb_in => wb_dram_in,
|
|
wb_out => wb_dram_out,
|
|
wb_ctrl_in => wb_ext_io_in,
|
|
wb_ctrl_out => wb_dram_ctrl_out,
|
|
wb_ctrl_is_csr => wb_ext_is_dram_csr,
|
|
wb_ctrl_is_init => wb_ext_is_dram_init,
|
|
|
|
init_done => dram_init_done,
|
|
init_error => dram_init_error,
|
|
|
|
ddram_a => ddram_a,
|
|
ddram_ba => ddram_ba,
|
|
ddram_ras_n => ddram_ras_n,
|
|
ddram_cas_n => ddram_cas_n,
|
|
ddram_we_n => ddram_we_n,
|
|
ddram_cs_n => ddram_cs_n,
|
|
ddram_dm => ddram_dm,
|
|
ddram_dq => ddram_dq,
|
|
ddram_dqs_p => ddram_dqs_p,
|
|
ddram_clk_p => ddram_clk_p,
|
|
-- only the positive differential pin is instantiated
|
|
--ddram_dqs_n => ddram_dqs_n,
|
|
--ddram_clk_n => ddram_clk_n,
|
|
ddram_cke => ddram_cke,
|
|
ddram_odt => ddram_odt,
|
|
|
|
ddram_reset_n => ddram_reset_n
|
|
);
|
|
|
|
ddram_gnd <= "00";
|
|
-- for power consumption.
|
|
-- https://github.com/orangecrab-fpga/orangecrab-hardware/issues/19#issuecomment-683479378
|
|
ddram_vccio <= "111111";
|
|
|
|
led0_b_pwm <= not dram_init_done;
|
|
led0_r_pwm <= dram_init_error;
|
|
led0_g_pwm <= dram_init_done and not dram_init_error;
|
|
|
|
end generate;
|
|
|
|
|
|
-- SD card pmod
|
|
has_sdcard : if USE_LITESDCARD generate
|
|
component litesdcard_core port (
|
|
clk : in std_ulogic;
|
|
rst : in std_ulogic;
|
|
-- wishbone for accessing control registers
|
|
wb_ctrl_adr : in std_ulogic_vector(29 downto 0);
|
|
wb_ctrl_dat_w : in std_ulogic_vector(31 downto 0);
|
|
wb_ctrl_dat_r : out std_ulogic_vector(31 downto 0);
|
|
wb_ctrl_sel : in std_ulogic_vector(3 downto 0);
|
|
wb_ctrl_cyc : in std_ulogic;
|
|
wb_ctrl_stb : in std_ulogic;
|
|
wb_ctrl_ack : out std_ulogic;
|
|
wb_ctrl_we : in std_ulogic;
|
|
wb_ctrl_cti : in std_ulogic_vector(2 downto 0);
|
|
wb_ctrl_bte : in std_ulogic_vector(1 downto 0);
|
|
wb_ctrl_err : out std_ulogic;
|
|
-- wishbone for SD card core to use for DMA
|
|
wb_dma_adr : out std_ulogic_vector(29 downto 0);
|
|
wb_dma_dat_w : out std_ulogic_vector(31 downto 0);
|
|
wb_dma_dat_r : in std_ulogic_vector(31 downto 0);
|
|
wb_dma_sel : out std_ulogic_vector(3 downto 0);
|
|
wb_dma_cyc : out std_ulogic;
|
|
wb_dma_stb : out std_ulogic;
|
|
wb_dma_ack : in std_ulogic;
|
|
wb_dma_we : out std_ulogic;
|
|
wb_dma_cti : out std_ulogic_vector(2 downto 0);
|
|
wb_dma_bte : out std_ulogic_vector(1 downto 0);
|
|
wb_dma_err : in std_ulogic;
|
|
-- connections to SD card
|
|
sdcard_data : inout std_ulogic_vector(3 downto 0);
|
|
sdcard_cmd : inout std_ulogic;
|
|
sdcard_clk : out std_ulogic;
|
|
sdcard_cd : in std_ulogic;
|
|
irq : out std_ulogic
|
|
);
|
|
end component;
|
|
|
|
signal wb_sdcard_cyc : std_ulogic;
|
|
signal wb_sdcard_adr : std_ulogic_vector(29 downto 0);
|
|
|
|
begin
|
|
litesdcard : litesdcard_core
|
|
port map (
|
|
clk => system_clk,
|
|
rst => soc_rst,
|
|
wb_ctrl_adr => wb_sdcard_adr,
|
|
wb_ctrl_dat_w => wb_ext_io_in.dat,
|
|
wb_ctrl_dat_r => wb_sdcard_out.dat,
|
|
wb_ctrl_sel => wb_ext_io_in.sel,
|
|
wb_ctrl_cyc => wb_sdcard_cyc,
|
|
wb_ctrl_stb => wb_ext_io_in.stb,
|
|
wb_ctrl_ack => wb_sdcard_out.ack,
|
|
wb_ctrl_we => wb_ext_io_in.we,
|
|
wb_ctrl_cti => "000",
|
|
wb_ctrl_bte => "00",
|
|
wb_ctrl_err => open,
|
|
wb_dma_adr => wb_sddma_nr.adr,
|
|
wb_dma_dat_w => wb_sddma_nr.dat,
|
|
wb_dma_dat_r => wb_sddma_ir.dat,
|
|
wb_dma_sel => wb_sddma_nr.sel,
|
|
wb_dma_cyc => wb_sddma_nr.cyc,
|
|
wb_dma_stb => wb_sddma_nr.stb,
|
|
wb_dma_ack => wb_sddma_ir.ack,
|
|
wb_dma_we => wb_sddma_nr.we,
|
|
wb_dma_cti => open,
|
|
wb_dma_bte => open,
|
|
wb_dma_err => '0',
|
|
sdcard_data => sdcard_data,
|
|
sdcard_cmd => sdcard_cmd,
|
|
sdcard_clk => sdcard_clk,
|
|
sdcard_cd => sdcard_cd,
|
|
irq => ext_irq_sdcard
|
|
);
|
|
|
|
-- Gate cyc with chip select from SoC
|
|
wb_sdcard_cyc <= wb_ext_io_in.cyc and wb_ext_is_sdcard;
|
|
|
|
wb_sdcard_adr <= x"0000" & wb_ext_io_in.adr(13 downto 0);
|
|
|
|
wb_sdcard_out.stall <= not wb_sdcard_out.ack;
|
|
|
|
-- Convert non-pipelined DMA wishbone to pipelined by suppressing
|
|
-- non-acknowledged strobes
|
|
process(system_clk)
|
|
begin
|
|
if rising_edge(system_clk) then
|
|
wb_sddma_out <= wb_sddma_nr;
|
|
if wb_sddma_stb_sent = '1' or
|
|
(wb_sddma_out.stb = '1' and wb_sddma_in.stall = '0') then
|
|
wb_sddma_out.stb <= '0';
|
|
end if;
|
|
if wb_sddma_nr.cyc = '0' or wb_sddma_ir.ack = '1' then
|
|
wb_sddma_stb_sent <= '0';
|
|
elsif wb_sddma_in.stall = '0' then
|
|
wb_sddma_stb_sent <= wb_sddma_nr.stb;
|
|
end if;
|
|
wb_sddma_ir <= wb_sddma_in;
|
|
end if;
|
|
end process;
|
|
|
|
end generate;
|
|
|
|
-- Mux WB response on the IO bus
|
|
wb_ext_io_out <= wb_sdcard_out when wb_ext_is_sdcard = '1' else
|
|
wb_dram_ctrl_out;
|
|
|
|
leds_pwm : process(system_clk)
|
|
begin
|
|
if rising_edge(system_clk) then
|
|
pwm_counter <= std_ulogic_vector(signed(pwm_counter) + 1);
|
|
if pwm_counter(8 downto 4) = "00000" then
|
|
led0_b <= led0_b_pwm;
|
|
led0_r <= led0_r_pwm;
|
|
led0_g <= led0_g_pwm;
|
|
else
|
|
led0_b <= '0';
|
|
led0_r <= '0';
|
|
led0_g <= '0';
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
end architecture behaviour;
|