library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; library work; use work.wishbone_types.all; entity toplevel is generic ( MEMORY_SIZE : integer := 16384; RAM_INIT_FILE : string := "firmware.hex"; RESET_LOW : boolean := true; CLK_INPUT : positive := 100000000; CLK_FREQUENCY : positive := 100000000; HAS_FPU : boolean := true; HAS_BTC : boolean := false; USE_LITEDRAM : boolean := true; NO_BRAM : boolean := true; SCLK_STARTUPE2 : boolean := false; SPI_FLASH_OFFSET : integer := 4194304; SPI_FLASH_DEF_CKDV : natural := 1; SPI_FLASH_DEF_QUAD : boolean := true; LOG_LENGTH : natural := 0; UART_IS_16550 : boolean := true; HAS_UART1 : boolean := false; USE_LITESDCARD : boolean := true; ICACHE_NUM_LINES : natural := 64; NGPIO : natural := 0 ); port( ext_clk : in std_ulogic; ext_rst_n : in std_ulogic; -- UART0 signals: pin_gpio_0 : out std_ulogic; pin_gpio_1 : in std_ulogic; -- LEDs led0_b : out std_ulogic; led0_g : out std_ulogic; led0_r : out std_ulogic; -- SPI spi_flash_cs_n : out std_ulogic; spi_flash_mosi : inout std_ulogic; spi_flash_miso : inout std_ulogic; spi_flash_wp_n : inout std_ulogic; spi_flash_hold_n : inout std_ulogic; -- SD card wires sdcard_data : inout std_ulogic_vector(3 downto 0); sdcard_cmd : inout std_ulogic; sdcard_clk : out std_ulogic; sdcard_cd : in std_ulogic; -- DRAM wires ddram_a : out std_ulogic_vector(13 downto 0); ddram_ba : out std_ulogic_vector(2 downto 0); ddram_ras_n : out std_ulogic; ddram_cas_n : out std_ulogic; ddram_we_n : out std_ulogic; ddram_cs_n : out std_ulogic; ddram_dm : out std_ulogic_vector(1 downto 0); ddram_dq : inout std_ulogic_vector(15 downto 0); ddram_dqs_p : inout std_ulogic_vector(1 downto 0); ddram_clk_p : out std_ulogic; -- only the positive differential pin is instantiated --ddram_dqs_n : inout std_ulogic_vector(1 downto 0); --ddram_clk_n : out std_ulogic; ddram_cke : out std_ulogic; ddram_odt : out std_ulogic; ddram_reset_n : out std_ulogic; ddram_gnd : out std_ulogic_vector(1 downto 0); ddram_vccio : out std_ulogic_vector(5 downto 0) ); end entity toplevel; architecture behaviour of toplevel is -- Reset signals: signal soc_rst : std_ulogic; signal pll_rst : std_ulogic; -- Internal clock signals: signal system_clk : std_ulogic; signal system_clk_locked : std_ulogic; -- External IOs from the SoC signal wb_ext_io_in : wb_io_master_out; signal wb_ext_io_out : wb_io_slave_out; signal wb_ext_is_dram_csr : std_ulogic; signal wb_ext_is_dram_init : std_ulogic; signal wb_ext_is_sdcard : std_ulogic; -- DRAM main data wishbone connection signal wb_dram_in : wishbone_master_out; signal wb_dram_out : wishbone_slave_out; -- DRAM control wishbone connection signal wb_dram_ctrl_out : wb_io_slave_out := wb_io_slave_out_init; -- LiteSDCard connection signal ext_irq_sdcard : std_ulogic := '0'; signal wb_sdcard_out : wb_io_slave_out := wb_io_slave_out_init; signal wb_sddma_out : wb_io_master_out := wb_io_master_out_init; signal wb_sddma_in : wb_io_slave_out; signal wb_sddma_nr : wb_io_master_out; signal wb_sddma_ir : wb_io_slave_out; -- for conversion from non-pipelined wishbone to pipelined signal wb_sddma_stb_sent : std_ulogic; -- Control/status signal core_alt_reset : std_ulogic; -- Status LED signal led0_b_pwm : std_ulogic; signal led0_r_pwm : std_ulogic; signal led0_g_pwm : std_ulogic; -- Dumb PWM for the LEDs, those RGB LEDs are too bright otherwise signal pwm_counter : std_ulogic_vector(8 downto 0); -- SPI flash signal spi_sck : std_ulogic; signal spi_cs_n : std_ulogic; signal spi_sdat_o : std_ulogic_vector(3 downto 0); signal spi_sdat_oe : std_ulogic_vector(3 downto 0); signal spi_sdat_i : std_ulogic_vector(3 downto 0); -- GPIO signal gpio_in : std_ulogic_vector(NGPIO - 1 downto 0); signal gpio_out : std_ulogic_vector(NGPIO - 1 downto 0); signal gpio_dir : std_ulogic_vector(NGPIO - 1 downto 0); -- Fixup various memory sizes based on generics function get_bram_size return natural is begin if USE_LITEDRAM and NO_BRAM then return 0; else return MEMORY_SIZE; end if; end function; function get_payload_size return natural is begin if USE_LITEDRAM and NO_BRAM then return MEMORY_SIZE; else return 0; end if; end function; constant BRAM_SIZE : natural := get_bram_size; constant PAYLOAD_SIZE : natural := get_payload_size; COMPONENT USRMCLK PORT( USRMCLKI : IN STD_ULOGIC; USRMCLKTS : IN STD_ULOGIC ); END COMPONENT; attribute syn_noprune: boolean ; attribute syn_noprune of USRMCLK: component is true; begin -- Main SoC soc0: entity work.soc generic map( MEMORY_SIZE => BRAM_SIZE, RAM_INIT_FILE => RAM_INIT_FILE, SIM => false, CLK_FREQ => CLK_FREQUENCY, HAS_FPU => HAS_FPU, HAS_BTC => HAS_BTC, HAS_DRAM => USE_LITEDRAM, DRAM_SIZE => 256 * 1024 * 1024, DRAM_INIT_SIZE => PAYLOAD_SIZE, HAS_SPI_FLASH => true, SPI_FLASH_DLINES => 4, SPI_FLASH_OFFSET => SPI_FLASH_OFFSET, SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV, SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD, LOG_LENGTH => LOG_LENGTH, UART0_IS_16550 => UART_IS_16550, HAS_UART1 => HAS_UART1, HAS_SD_CARD => USE_LITESDCARD, ICACHE_NUM_LINES => ICACHE_NUM_LINES, HAS_SHORT_MULT => true, NGPIO => NGPIO ) port map ( -- System signals system_clk => system_clk, rst => soc_rst, -- UART signals uart0_txd => pin_gpio_0, uart0_rxd => pin_gpio_1, -- UART1 signals --uart1_txd => uart_pmod_tx, --uart1_rxd => uart_pmod_rx, -- SPI signals spi_flash_sck => spi_sck, spi_flash_cs_n => spi_cs_n, spi_flash_sdat_o => spi_sdat_o, spi_flash_sdat_oe => spi_sdat_oe, spi_flash_sdat_i => spi_sdat_i, -- GPIO signals gpio_in => gpio_in, gpio_out => gpio_out, gpio_dir => gpio_dir, -- External interrupts ext_irq_sdcard => ext_irq_sdcard, -- DRAM wishbone wb_dram_in => wb_dram_in, wb_dram_out => wb_dram_out, -- IO wishbone wb_ext_io_in => wb_ext_io_in, wb_ext_io_out => wb_ext_io_out, wb_ext_is_dram_csr => wb_ext_is_dram_csr, wb_ext_is_dram_init => wb_ext_is_dram_init, wb_ext_is_sdcard => wb_ext_is_sdcard, -- DMA wishbone wishbone_dma_in => wb_sddma_in, wishbone_dma_out => wb_sddma_out, alt_reset => core_alt_reset ); -- SPI Flash -- spi_flash_cs_n <= spi_cs_n; spi_flash_mosi <= spi_sdat_o(0) when spi_sdat_oe(0) = '1' else 'Z'; spi_flash_miso <= spi_sdat_o(1) when spi_sdat_oe(1) = '1' else 'Z'; spi_flash_wp_n <= spi_sdat_o(2) when spi_sdat_oe(2) = '1' else 'Z'; spi_flash_hold_n <= spi_sdat_o(3) when spi_sdat_oe(3) = '1' else 'Z'; spi_sdat_i(0) <= spi_flash_mosi; spi_sdat_i(1) <= spi_flash_miso; spi_sdat_i(2) <= spi_flash_wp_n; spi_sdat_i(3) <= spi_flash_hold_n; uclk: USRMCLK port map ( USRMCLKI => spi_sck, USRMCLKTS => '0' ); nodram: if not USE_LITEDRAM generate signal ddram_clk_dummy : std_ulogic; begin reset_controller: entity work.soc_reset generic map( RESET_LOW => RESET_LOW ) port map( ext_clk => ext_clk, pll_clk => system_clk, pll_locked_in => system_clk_locked, ext_rst_in => ext_rst_n, pll_rst_out => pll_rst, rst_out => soc_rst ); clkgen: entity work.clock_generator generic map( CLK_INPUT_HZ => CLK_INPUT, CLK_OUTPUT_HZ => CLK_FREQUENCY ) port map( ext_clk => ext_clk, pll_rst_in => pll_rst, pll_clk_out => system_clk, pll_locked_out => system_clk_locked ); led0_b_pwm <= '1'; led0_r_pwm <= '1'; led0_g_pwm <= '0'; core_alt_reset <= '0'; end generate; has_dram: if USE_LITEDRAM generate signal dram_init_done : std_ulogic; signal dram_init_error : std_ulogic; signal dram_sys_rst : std_ulogic; signal rst_gen_rst : std_ulogic; begin -- Eventually dig out the frequency from -- litesdram generate.py sys_clk_freq -- but for now, assert it's 48Mhz for orangecrab assert CLK_FREQUENCY = 48000000; reset_controller: entity work.soc_reset generic map( RESET_LOW => RESET_LOW, PLL_RESET_BITS => 18, SOC_RESET_BITS => 1 ) port map( ext_clk => ext_clk, pll_clk => system_clk, pll_locked_in => system_clk_locked, ext_rst_in => ext_rst_n, pll_rst_out => pll_rst, rst_out => rst_gen_rst ); -- Generate SoC reset soc_rst_gen: process(system_clk) begin if ext_rst_n = '0' then soc_rst <= '1'; elsif rising_edge(system_clk) then soc_rst <= dram_sys_rst or not system_clk_locked; end if; end process; dram: entity work.litedram_wrapper generic map( DRAM_ABITS => 24, DRAM_ALINES => 14, DRAM_DLINES => 16, DRAM_PORT_WIDTH => 128, NUM_LINES => 8, -- reduce from default of 64 to make smaller/timing PAYLOAD_FILE => RAM_INIT_FILE, PAYLOAD_SIZE => PAYLOAD_SIZE ) port map( clk_in => ext_clk, rst => pll_rst, system_clk => system_clk, system_reset => dram_sys_rst, core_alt_reset => core_alt_reset, pll_locked => system_clk_locked, wb_in => wb_dram_in, wb_out => wb_dram_out, wb_ctrl_in => wb_ext_io_in, wb_ctrl_out => wb_dram_ctrl_out, wb_ctrl_is_csr => wb_ext_is_dram_csr, wb_ctrl_is_init => wb_ext_is_dram_init, init_done => dram_init_done, init_error => dram_init_error, ddram_a => ddram_a, ddram_ba => ddram_ba, ddram_ras_n => ddram_ras_n, ddram_cas_n => ddram_cas_n, ddram_we_n => ddram_we_n, ddram_cs_n => ddram_cs_n, ddram_dm => ddram_dm, ddram_dq => ddram_dq, ddram_dqs_p => ddram_dqs_p, ddram_clk_p => ddram_clk_p, -- only the positive differential pin is instantiated --ddram_dqs_n => ddram_dqs_n, --ddram_clk_n => ddram_clk_n, ddram_cke => ddram_cke, ddram_odt => ddram_odt, ddram_reset_n => ddram_reset_n ); ddram_gnd <= "00"; -- for power consumption. -- https://github.com/orangecrab-fpga/orangecrab-hardware/issues/19#issuecomment-683479378 ddram_vccio <= "111111"; led0_b_pwm <= not dram_init_done; led0_r_pwm <= dram_init_error; led0_g_pwm <= dram_init_done and not dram_init_error; end generate; -- SD card pmod has_sdcard : if USE_LITESDCARD generate component litesdcard_core port ( clk : in std_ulogic; rst : in std_ulogic; -- wishbone for accessing control registers wb_ctrl_adr : in std_ulogic_vector(29 downto 0); wb_ctrl_dat_w : in std_ulogic_vector(31 downto 0); wb_ctrl_dat_r : out std_ulogic_vector(31 downto 0); wb_ctrl_sel : in std_ulogic_vector(3 downto 0); wb_ctrl_cyc : in std_ulogic; wb_ctrl_stb : in std_ulogic; wb_ctrl_ack : out std_ulogic; wb_ctrl_we : in std_ulogic; wb_ctrl_cti : in std_ulogic_vector(2 downto 0); wb_ctrl_bte : in std_ulogic_vector(1 downto 0); wb_ctrl_err : out std_ulogic; -- wishbone for SD card core to use for DMA wb_dma_adr : out std_ulogic_vector(29 downto 0); wb_dma_dat_w : out std_ulogic_vector(31 downto 0); wb_dma_dat_r : in std_ulogic_vector(31 downto 0); wb_dma_sel : out std_ulogic_vector(3 downto 0); wb_dma_cyc : out std_ulogic; wb_dma_stb : out std_ulogic; wb_dma_ack : in std_ulogic; wb_dma_we : out std_ulogic; wb_dma_cti : out std_ulogic_vector(2 downto 0); wb_dma_bte : out std_ulogic_vector(1 downto 0); wb_dma_err : in std_ulogic; -- connections to SD card sdcard_data : inout std_ulogic_vector(3 downto 0); sdcard_cmd : inout std_ulogic; sdcard_clk : out std_ulogic; sdcard_cd : in std_ulogic; irq : out std_ulogic ); end component; signal wb_sdcard_cyc : std_ulogic; signal wb_sdcard_adr : std_ulogic_vector(29 downto 0); begin litesdcard : litesdcard_core port map ( clk => system_clk, rst => soc_rst, wb_ctrl_adr => wb_sdcard_adr, wb_ctrl_dat_w => wb_ext_io_in.dat, wb_ctrl_dat_r => wb_sdcard_out.dat, wb_ctrl_sel => wb_ext_io_in.sel, wb_ctrl_cyc => wb_sdcard_cyc, wb_ctrl_stb => wb_ext_io_in.stb, wb_ctrl_ack => wb_sdcard_out.ack, wb_ctrl_we => wb_ext_io_in.we, wb_ctrl_cti => "000", wb_ctrl_bte => "00", wb_ctrl_err => open, wb_dma_adr => wb_sddma_nr.adr, wb_dma_dat_w => wb_sddma_nr.dat, wb_dma_dat_r => wb_sddma_ir.dat, wb_dma_sel => wb_sddma_nr.sel, wb_dma_cyc => wb_sddma_nr.cyc, wb_dma_stb => wb_sddma_nr.stb, wb_dma_ack => wb_sddma_ir.ack, wb_dma_we => wb_sddma_nr.we, wb_dma_cti => open, wb_dma_bte => open, wb_dma_err => '0', sdcard_data => sdcard_data, sdcard_cmd => sdcard_cmd, sdcard_clk => sdcard_clk, sdcard_cd => sdcard_cd, irq => ext_irq_sdcard ); -- Gate cyc with chip select from SoC wb_sdcard_cyc <= wb_ext_io_in.cyc and wb_ext_is_sdcard; wb_sdcard_adr <= x"0000" & wb_ext_io_in.adr(13 downto 0); wb_sdcard_out.stall <= not wb_sdcard_out.ack; -- Convert non-pipelined DMA wishbone to pipelined by suppressing -- non-acknowledged strobes process(system_clk) begin if rising_edge(system_clk) then wb_sddma_out <= wb_sddma_nr; if wb_sddma_stb_sent = '1' or (wb_sddma_out.stb = '1' and wb_sddma_in.stall = '0') then wb_sddma_out.stb <= '0'; end if; if wb_sddma_nr.cyc = '0' or wb_sddma_ir.ack = '1' then wb_sddma_stb_sent <= '0'; elsif wb_sddma_in.stall = '0' then wb_sddma_stb_sent <= wb_sddma_nr.stb; end if; wb_sddma_ir <= wb_sddma_in; end if; end process; end generate; -- Mux WB response on the IO bus wb_ext_io_out <= wb_sdcard_out when wb_ext_is_sdcard = '1' else wb_dram_ctrl_out; leds_pwm : process(system_clk) begin if rising_edge(system_clk) then pwm_counter <= std_ulogic_vector(signed(pwm_counter) + 1); if pwm_counter(8 downto 4) = "00000" then led0_b <= led0_b_pwm; led0_r <= led0_r_pwm; led0_g <= led0_g_pwm; else led0_b <= '0'; led0_r <= '0'; led0_g <= '0'; end if; end if; end process; end architecture behaviour;