|
|
|
|
library ieee;
|
|
|
|
|
use ieee.std_logic_1164.all;
|
|
|
|
|
|
|
|
|
|
package decode_types is
|
|
|
|
|
type insn_type_t is (OP_ILLEGAL, OP_NOP, OP_ADD,
|
|
|
|
|
OP_AND, OP_ATTN, OP_B, OP_BC, OP_BCREG,
|
|
|
|
|
OP_BPERM, OP_CMP, OP_CMPB, OP_CMPEQB, OP_CMPRB,
|
|
|
|
|
OP_CNTZ, OP_CROP,
|
|
|
|
|
OP_DARN, OP_DCBF, OP_DCBST, OP_DCBT, OP_DCBTST,
|
|
|
|
|
OP_DCBZ, OP_DIV, OP_DIVE, OP_EXTS, OP_EXTSWSLI,
|
|
|
|
|
OP_FPOP, OP_FPOP_I,
|
|
|
|
|
OP_ICBI, OP_ICBT, OP_ISEL, OP_ISYNC,
|
|
|
|
|
OP_LOAD, OP_STORE,
|
|
|
|
|
OP_FPLOAD, OP_FPSTORE,
|
|
|
|
|
OP_MCRXRX, OP_MFCR, OP_MFMSR, OP_MFSPR, OP_MOD,
|
|
|
|
|
OP_MTCRF, OP_MTMSRD, OP_MTSPR, OP_MUL_L64,
|
|
|
|
|
OP_MUL_H64, OP_MUL_H32, OP_OR,
|
|
|
|
|
OP_POPCNT, OP_PRTY, OP_RFID,
|
|
|
|
|
OP_RLC, OP_RLCL, OP_RLCR, OP_SC, OP_SETB,
|
|
|
|
|
OP_SHL, OP_SHR,
|
|
|
|
|
OP_SYNC, OP_TLBIE, OP_TRAP,
|
Add TLB to icache
This adds a direct-mapped TLB to the icache, with 64 entries by default.
Execute1 now sends a "virt_mode" signal from MSR[IR] to fetch1 along
with redirects to indicate whether instruction addresses should be
translated through the TLB, and fetch1 sends that on to icache.
Similarly a "priv_mode" signal is sent to indicate the privilege
mode for instruction fetches. This means that changes to MSR[IR]
or MSR[PR] don't take effect until the next redirect, meaning an
isync, rfid, branch, etc.
The icache uses a hash of the effective address (i.e. next instruction
address) to index the TLB. The hash is an XOR of three fields of the
address; with a 64-entry TLB, the fields are bits 12--17, 18--23 and
24--29 of the address. TLB invalidations simply invalidate the
indexed TLB entry without checking the contents.
If the icache detects a TLB miss with virt_mode=1, it will send a
fetch_failed indication through fetch2 to decode1, which will turn it
into a special OP_FETCH_FAILED opcode with unit=LDST. That will get
sent down to loadstore1 which will currently just raise a Instruction
Storage Interrupt (0x400) exception.
One bit in the PTE obtained from the TLB is used to check whether an
instruction access is allowed -- the privilege bit (bit 3). If bit 3
is 1 and priv_mode=0, then a fetch_failed indication is sent down to
fetch2 and to decode1, which generates an OP_FETCH_FAILED. Any PTEs
with PTE bit 0 (EAA[3]) clear or bit 8 (R) clear should not be put
into the iTLB since such PTEs would not allow execution by any
context.
Tlbie operations get sent from mmu to icache over a new connection.
Unfortunately the privileged instruction tests are broken for now.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
|
|
|
OP_XOR,
|
|
|
|
|
OP_BCD, OP_ADDG6S,
|
Add TLB to icache
This adds a direct-mapped TLB to the icache, with 64 entries by default.
Execute1 now sends a "virt_mode" signal from MSR[IR] to fetch1 along
with redirects to indicate whether instruction addresses should be
translated through the TLB, and fetch1 sends that on to icache.
Similarly a "priv_mode" signal is sent to indicate the privilege
mode for instruction fetches. This means that changes to MSR[IR]
or MSR[PR] don't take effect until the next redirect, meaning an
isync, rfid, branch, etc.
The icache uses a hash of the effective address (i.e. next instruction
address) to index the TLB. The hash is an XOR of three fields of the
address; with a 64-entry TLB, the fields are bits 12--17, 18--23 and
24--29 of the address. TLB invalidations simply invalidate the
indexed TLB entry without checking the contents.
If the icache detects a TLB miss with virt_mode=1, it will send a
fetch_failed indication through fetch2 to decode1, which will turn it
into a special OP_FETCH_FAILED opcode with unit=LDST. That will get
sent down to loadstore1 which will currently just raise a Instruction
Storage Interrupt (0x400) exception.
One bit in the PTE obtained from the TLB is used to check whether an
instruction access is allowed -- the privilege bit (bit 3). If bit 3
is 1 and priv_mode=0, then a fetch_failed indication is sent down to
fetch2 and to decode1, which generates an OP_FETCH_FAILED. Any PTEs
with PTE bit 0 (EAA[3]) clear or bit 8 (R) clear should not be put
into the iTLB since such PTEs would not allow execution by any
context.
Tlbie operations get sent from mmu to icache over a new connection.
Unfortunately the privileged instruction tests are broken for now.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
|
|
|
OP_FETCH_FAILED
|
|
|
|
|
);
|
|
|
|
|
type input_reg_a_t is (NONE, RA, RA_OR_ZERO, SPR, CIA, FRA);
|
|
|
|
|
type input_reg_b_t is (NONE, RB, CONST_UI, CONST_SI, CONST_SI_HI, CONST_UI_HI, CONST_LI, CONST_BD,
|
|
|
|
|
CONST_DXHI4, CONST_DS, CONST_M1, CONST_SH, CONST_SH32, SPR, FRB);
|
|
|
|
|
type input_reg_c_t is (NONE, RS, RCR, FRS);
|
|
|
|
|
type output_reg_a_t is (NONE, RT, RA, SPR, FRT);
|
|
|
|
|
type rc_t is (NONE, ONE, RC);
|
|
|
|
|
type carry_in_t is (ZERO, CA, OV, ONE);
|
|
|
|
|
|
|
|
|
|
constant SH_OFFSET : integer := 0;
|
|
|
|
|
constant MB_OFFSET : integer := 1;
|
|
|
|
|
constant ME_OFFSET : integer := 1;
|
|
|
|
|
constant SH32_OFFSET : integer := 0;
|
|
|
|
|
constant MB32_OFFSET : integer := 1;
|
|
|
|
|
constant ME32_OFFSET : integer := 2;
|
|
|
|
|
|
|
|
|
|
constant FXM_OFFSET : integer := 0;
|
|
|
|
|
|
|
|
|
|
constant BO_OFFSET : integer := 0;
|
|
|
|
|
constant BI_OFFSET : integer := 1;
|
|
|
|
|
constant BH_OFFSET : integer := 2;
|
|
|
|
|
|
|
|
|
|
constant BF_OFFSET : integer := 0;
|
|
|
|
|
constant L_OFFSET : integer := 1;
|
|
|
|
|
|
|
|
|
|
constant TOO_OFFSET : integer := 0;
|
|
|
|
|
|
|
|
|
|
type unit_t is (NONE, ALU, LDST, FPU);
|
|
|
|
|
type length_t is (NONE, is1B, is2B, is4B, is8B);
|
|
|
|
|
|
|
|
|
|
type decode_rom_t is record
|
|
|
|
|
unit : unit_t;
|
|
|
|
|
insn_type : insn_type_t;
|
|
|
|
|
input_reg_a : input_reg_a_t;
|
|
|
|
|
input_reg_b : input_reg_b_t;
|
|
|
|
|
input_reg_c : input_reg_c_t;
|
|
|
|
|
output_reg_a : output_reg_a_t;
|
|
|
|
|
|
|
|
|
|
input_cr : std_ulogic;
|
|
|
|
|
output_cr : std_ulogic;
|
|
|
|
|
|
|
|
|
|
invert_a : std_ulogic;
|
|
|
|
|
invert_out : std_ulogic;
|
|
|
|
|
input_carry : carry_in_t;
|
|
|
|
|
output_carry : std_ulogic;
|
|
|
|
|
|
|
|
|
|
-- load/store signals
|
|
|
|
|
length : length_t;
|
|
|
|
|
byte_reverse : std_ulogic;
|
|
|
|
|
sign_extend : std_ulogic;
|
|
|
|
|
update : std_ulogic;
|
|
|
|
|
reserve : std_ulogic;
|
|
|
|
|
|
|
|
|
|
-- multiplier and ALU signals
|
|
|
|
|
is_32bit : std_ulogic;
|
|
|
|
|
is_signed : std_ulogic;
|
|
|
|
|
|
|
|
|
|
rc : rc_t;
|
|
|
|
|
lr : std_ulogic;
|
|
|
|
|
|
|
|
|
|
sgl_pipe : std_ulogic;
|
|
|
|
|
end record;
|
|
|
|
|
constant decode_rom_init : decode_rom_t := (unit => NONE,
|
|
|
|
|
insn_type => OP_ILLEGAL, input_reg_a => NONE,
|
|
|
|
|
input_reg_b => NONE, input_reg_c => NONE,
|
|
|
|
|
output_reg_a => NONE, input_cr => '0', output_cr => '0',
|
|
|
|
|
invert_a => '0', invert_out => '0', input_carry => ZERO, output_carry => '0',
|
|
|
|
|
length => NONE, byte_reverse => '0', sign_extend => '0',
|
|
|
|
|
update => '0', reserve => '0', is_32bit => '0',
|
|
|
|
|
is_signed => '0', rc => NONE, lr => '0', sgl_pipe => '0');
|
|
|
|
|
|
|
|
|
|
end decode_types;
|
|
|
|
|
|
|
|
|
|
package body decode_types is
|
|
|
|
|
end decode_types;
|
