You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

137 lines
3.4 KiB
Verilog

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

// © IBM Corp. 2021
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by the terms below; you may not use the files in this
// repository except in compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the License, the "Work" hereby includes implementations of
// the work of authorship in physical form.
//
// Unless required by applicable law or agreed to in writing, the reference design distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language
// governing permissions and limitations under the License.
//
// Brief explanation of modifications:
//
// Modification 1: This modification extends the patent license to an implementation of the Work in physical form i.e.,
// it unambiguously permits a user to make and use the physical chip.
// Test array (SDR) wrrapper for cocotb/icarus
// 64 word 72 bit array
// LCB for strobe generation
// Config, BIST, etc.
`timescale 1 ns/1 ps
`include "toysram.vh"
module test_ra_sdr_64x72 (
clk,
reset,
cfg_wr,
cfg_dat,
bist_ctl,
bist_status,
rd_enb_0,
rd_adr_0,
rd_dat_0,
rd_enb_1,
rd_adr_1,
rd_dat_1,
wr_enb_0,
wr_adr_0,
wr_dat_0
);
input clk;
input reset;
input cfg_wr;
input [0:`LCBSDR_CONFIGWIDTH-1] cfg_dat;
input [0:31] bist_ctl;
output [0:31] bist_status;
input rd_enb_0;
input [0:5] rd_adr_0;
output [0:71] rd_dat_0;
input rd_enb_1;
input [0:5] rd_adr_1;
output [0:71] rd_dat_1;
input wr_enb_0;
input [0:5] wr_adr_0;
input [0:71] wr_dat_0;
wire strobe;
wire [0:`LCBSDR_CONFIGWIDTH-1] cfg;
wire mux_rd0_enb;
wire [0:5] mux_rd0_adr;
wire mux_rd1_enb;
wire [0:5] mux_rd1_adr;
wire mux_wr0_enb;
wire [0:5] mux_wr0_adr;
wire [0:71] mux_wr0_dat;
initial begin
$dumpfile("sdr.vcd");
$dumpvars;
end
ra_lcb_sdr lcb (
.clk (clk),
.reset (reset),
.cfg (cfg),
.strobe (strobe)
);
ra_cfg_sdr #(.INIT(-1)) cfig (
.clk (clk),
.reset (reset),
.cfg_wr (cfg_wr),
.cfg_dat (cfg_dat),
.cfg (cfg)
);
ra_bist_sdr bist (
.clk (clk),
.reset (reset),
.ctl (bist_ctl),
.status (bist_status),
.rd0_enb_in (rd_enb_0),
.rd0_adr_in (rd_adr_0),
.rd0_dat (rd_dat_0),
.rd1_enb_in (rd_enb_1),
.rd1_adr_in (rd_adr_1),
.rd1_dat (rd_dat_1),
.wr0_enb_in (wr_enb_0),
.wr0_adr_in (wr_adr_0),
.wr0_dat_in (wr_dat_0),
.rd0_enb_out (mux_rd0_enb),
.rd0_adr_out (mux_rd0_adr),
.rd1_enb_out (mux_rd1_enb),
.rd1_adr_out (mux_rd1_adr),
.wr0_enb_out (mux_wr0_enb),
.wr0_adr_out (mux_wr0_adr),
.wr0_dat_out (mux_wr0_dat)
);
ra_2r1w_64x72_sdr ra (
.clk (clk),
.reset (reset),
.strobe (strobe),
.rd_enb_0 (mux_rd0_enb),
.rd_adr_0 (mux_rd0_adr),
.rd_dat_0 (rd_dat_0),
.rd_enb_1 (mux_rd1_enb),
.rd_adr_1 (mux_rd1_adr),
.rd_dat_1 (rd_dat_1),
.wr_enb_0 (mux_wr0_enb),
.wr_adr_0 (mux_wr0_adr),
.wr_dat_0 (mux_wr0_dat)
);
endmodule