You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
241 lines
8.4 KiB
VHDL
241 lines
8.4 KiB
VHDL
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
|
|
library work;
|
|
use work.common.all;
|
|
use work.crhelpers.all;
|
|
|
|
entity writeback is
|
|
port (
|
|
clk : in std_ulogic;
|
|
rst : in std_ulogic;
|
|
|
|
e_in : in Execute1ToWritebackType;
|
|
l_in : in Loadstore1ToWritebackType;
|
|
fp_in : in FPUToWritebackType;
|
|
|
|
w_out : out WritebackToRegisterFileType;
|
|
c_out : out WritebackToCrFileType;
|
|
f_out : out WritebackToFetch1Type;
|
|
|
|
-- PMU event bus
|
|
events : out WritebackEventType;
|
|
|
|
flush_out : out std_ulogic;
|
|
interrupt_out: out std_ulogic;
|
|
complete_out : out instr_tag_t
|
|
);
|
|
end entity writeback;
|
|
|
|
architecture behaviour of writeback is
|
|
type irq_state_t is (WRITE_SRR0, WRITE_SRR1);
|
|
|
|
type reg_type is record
|
|
state : irq_state_t;
|
|
srr1 : std_ulogic_vector(63 downto 0);
|
|
end record;
|
|
|
|
signal r, rin : reg_type;
|
|
|
|
begin
|
|
writeback_0: process(clk)
|
|
variable x : std_ulogic_vector(0 downto 0);
|
|
variable y : std_ulogic_vector(0 downto 0);
|
|
variable w : std_ulogic_vector(0 downto 0);
|
|
begin
|
|
if rising_edge(clk) then
|
|
if rst = '1' then
|
|
r.state <= WRITE_SRR0;
|
|
r.srr1 <= (others => '0');
|
|
else
|
|
r <= rin;
|
|
end if;
|
|
|
|
-- Do consistency checks only on the clock edge
|
|
x(0) := e_in.valid;
|
|
y(0) := l_in.valid;
|
|
w(0) := fp_in.valid;
|
|
assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) +
|
|
to_integer(unsigned(w))) <= 1 severity failure;
|
|
|
|
x(0) := e_in.write_enable;
|
|
y(0) := l_in.write_enable;
|
|
w(0) := fp_in.write_enable;
|
|
assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) +
|
|
to_integer(unsigned(w))) <= 1 severity failure;
|
|
|
|
w(0) := e_in.write_cr_enable;
|
|
x(0) := (e_in.write_enable and e_in.rc);
|
|
y(0) := fp_in.write_cr_enable;
|
|
assert (to_integer(unsigned(w)) + to_integer(unsigned(x)) +
|
|
to_integer(unsigned(y))) <= 1 severity failure;
|
|
|
|
assert not (e_in.valid = '1' and e_in.instr_tag.valid = '0') severity failure;
|
|
assert not (l_in.valid = '1' and l_in.instr_tag.valid = '0') severity failure;
|
|
assert not (fp_in.valid = '1' and fp_in.instr_tag.valid = '0') severity failure;
|
|
end if;
|
|
end process;
|
|
|
|
writeback_1: process(all)
|
|
variable v : reg_type;
|
|
variable f : WritebackToFetch1Type;
|
|
variable cf: std_ulogic_vector(3 downto 0);
|
|
variable zero : std_ulogic;
|
|
variable sign : std_ulogic;
|
|
variable scf : std_ulogic_vector(3 downto 0);
|
|
variable vec : integer range 0 to 16#fff#;
|
|
variable srr1 : std_ulogic_vector(15 downto 0);
|
|
variable intr : std_ulogic;
|
|
begin
|
|
w_out <= WritebackToRegisterFileInit;
|
|
c_out <= WritebackToCrFileInit;
|
|
f := WritebackToFetch1Init;
|
|
interrupt_out <= '0';
|
|
vec := 0;
|
|
v := r;
|
|
|
|
complete_out <= instr_tag_init;
|
|
if e_in.valid = '1' then
|
|
complete_out <= e_in.instr_tag;
|
|
elsif l_in.valid = '1' then
|
|
complete_out <= l_in.instr_tag;
|
|
elsif fp_in.valid = '1' then
|
|
complete_out <= fp_in.instr_tag;
|
|
end if;
|
|
events.instr_complete <= complete_out.valid;
|
|
|
|
intr := e_in.interrupt or l_in.interrupt or fp_in.interrupt;
|
|
|
|
if r.state = WRITE_SRR1 then
|
|
w_out.write_reg <= fast_spr_num(SPR_SRR1);
|
|
w_out.write_data <= r.srr1;
|
|
w_out.write_enable <= '1';
|
|
interrupt_out <= '1';
|
|
v.state := WRITE_SRR0;
|
|
|
|
elsif intr = '1' then
|
|
w_out.write_reg <= fast_spr_num(SPR_SRR0);
|
|
w_out.write_enable <= '1';
|
|
v.state := WRITE_SRR1;
|
|
srr1 := (others => '0');
|
|
if e_in.interrupt = '1' then
|
|
vec := e_in.intr_vec;
|
|
w_out.write_data <= e_in.last_nia;
|
|
srr1 := e_in.srr1;
|
|
elsif l_in.interrupt = '1' then
|
|
vec := l_in.intr_vec;
|
|
w_out.write_data <= l_in.srr0;
|
|
srr1 := l_in.srr1;
|
|
elsif fp_in.interrupt = '1' then
|
|
vec := fp_in.intr_vec;
|
|
w_out.write_data <= fp_in.srr0;
|
|
srr1 := fp_in.srr1;
|
|
end if;
|
|
v.srr1(63 downto 31) := e_in.msr(63 downto 31);
|
|
v.srr1(30 downto 27) := srr1(14 downto 11);
|
|
v.srr1(26 downto 22) := e_in.msr(26 downto 22);
|
|
v.srr1(21 downto 16) := srr1(5 downto 0);
|
|
v.srr1(15 downto 0) := e_in.msr(15 downto 0);
|
|
|
|
else
|
|
if e_in.write_enable = '1' then
|
|
w_out.write_reg <= e_in.write_reg;
|
|
w_out.write_data <= e_in.write_data;
|
|
w_out.write_enable <= '1';
|
|
end if;
|
|
|
|
if e_in.write_cr_enable = '1' then
|
|
c_out.write_cr_enable <= '1';
|
|
c_out.write_cr_mask <= e_in.write_cr_mask;
|
|
c_out.write_cr_data <= e_in.write_cr_data;
|
|
end if;
|
|
|
|
if e_in.write_xerc_enable = '1' then
|
|
c_out.write_xerc_enable <= '1';
|
|
c_out.write_xerc_data <= e_in.xerc;
|
|
end if;
|
|
|
|
if fp_in.write_enable = '1' then
|
|
w_out.write_reg <= fp_in.write_reg;
|
|
w_out.write_data <= fp_in.write_data;
|
|
w_out.write_enable <= '1';
|
|
end if;
|
|
|
|
if fp_in.write_cr_enable = '1' then
|
|
c_out.write_cr_enable <= '1';
|
|
c_out.write_cr_mask <= fp_in.write_cr_mask;
|
|
c_out.write_cr_data <= fp_in.write_cr_data;
|
|
end if;
|
|
|
|
if l_in.write_enable = '1' then
|
|
w_out.write_reg <= l_in.write_reg;
|
|
w_out.write_data <= l_in.write_data;
|
|
w_out.write_enable <= '1';
|
|
end if;
|
|
|
|
if l_in.rc = '1' then
|
|
-- st*cx. instructions
|
|
scf(3) := '0';
|
|
scf(2) := '0';
|
|
scf(1) := l_in.store_done;
|
|
scf(0) := l_in.xerc.so;
|
|
c_out.write_cr_enable <= '1';
|
|
c_out.write_cr_mask <= num_to_fxm(0);
|
|
c_out.write_cr_data(31 downto 28) <= scf;
|
|
end if;
|
|
|
|
-- Perform CR0 update for RC forms
|
|
-- Note that loads never have a form with an RC bit, therefore this can test e_in.write_data
|
|
if e_in.rc = '1' and e_in.write_enable = '1' then
|
|
zero := not (or e_in.write_data(31 downto 0));
|
|
if e_in.mode_32bit = '0' then
|
|
sign := e_in.write_data(63);
|
|
zero := zero and not (or e_in.write_data(63 downto 32));
|
|
else
|
|
sign := e_in.write_data(31);
|
|
end if;
|
|
c_out.write_cr_enable <= '1';
|
|
c_out.write_cr_mask <= num_to_fxm(0);
|
|
cf(3) := sign;
|
|
cf(2) := not sign and not zero;
|
|
cf(1) := zero;
|
|
cf(0) := e_in.xerc.so;
|
|
c_out.write_cr_data(31 downto 28) <= cf;
|
|
end if;
|
|
end if;
|
|
|
|
-- Outputs to fetch1
|
|
f.redirect := e_in.redirect;
|
|
f.br_nia := e_in.last_nia;
|
|
f.br_last := e_in.br_last;
|
|
f.br_taken := e_in.br_taken;
|
|
if intr = '1' then
|
|
f.redirect := '1';
|
|
f.br_last := '0';
|
|
f.redirect_nia := std_ulogic_vector(to_unsigned(vec, 64));
|
|
f.virt_mode := '0';
|
|
f.priv_mode := '1';
|
|
-- XXX need an interrupt LE bit here, e.g. from LPCR
|
|
f.big_endian := '0';
|
|
f.mode_32bit := '0';
|
|
else
|
|
if e_in.abs_br = '1' then
|
|
f.redirect_nia := e_in.br_offset;
|
|
else
|
|
f.redirect_nia := std_ulogic_vector(unsigned(e_in.last_nia) + unsigned(e_in.br_offset));
|
|
end if;
|
|
-- send MSR[IR], ~MSR[PR], ~MSR[LE] and ~MSR[SF] up to fetch1
|
|
f.virt_mode := e_in.redir_mode(3);
|
|
f.priv_mode := e_in.redir_mode(2);
|
|
f.big_endian := e_in.redir_mode(1);
|
|
f.mode_32bit := e_in.redir_mode(0);
|
|
end if;
|
|
|
|
f_out <= f;
|
|
flush_out <= f_out.redirect;
|
|
|
|
rin <= v;
|
|
end process;
|
|
end;
|