You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
795 lines
30 KiB
VHDL
795 lines
30 KiB
VHDL
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
|
|
library work;
|
|
use work.decode_types.all;
|
|
use work.common.all;
|
|
use work.insn_helpers.all;
|
|
use work.helpers.all;
|
|
|
|
-- 2 cycle LSU
|
|
-- We calculate the address in the first cycle
|
|
|
|
entity loadstore1 is
|
|
generic (
|
|
HAS_FPU : boolean := true;
|
|
-- Non-zero to enable log data collection
|
|
LOG_LENGTH : natural := 0
|
|
);
|
|
port (
|
|
clk : in std_ulogic;
|
|
rst : in std_ulogic;
|
|
|
|
l_in : in Execute1ToLoadstore1Type;
|
|
e_out : out Loadstore1ToExecute1Type;
|
|
l_out : out Loadstore1ToWritebackType;
|
|
|
|
d_out : out Loadstore1ToDcacheType;
|
|
d_in : in DcacheToLoadstore1Type;
|
|
|
|
m_out : out Loadstore1ToMmuType;
|
|
m_in : in MmuToLoadstore1Type;
|
|
|
|
dc_stall : in std_ulogic;
|
|
|
|
log_out : out std_ulogic_vector(9 downto 0)
|
|
);
|
|
end loadstore1;
|
|
|
|
-- Note, we don't currently use the stall output from the dcache because
|
|
-- we know it can take two requests without stalling when idle, we are
|
|
-- its only user, and we know it never stalls when idle.
|
|
|
|
architecture behave of loadstore1 is
|
|
|
|
-- State machine for unaligned loads/stores
|
|
type state_t is (IDLE, -- ready for instruction
|
|
FPR_CONV, -- converting double to float for store
|
|
SECOND_REQ, -- send 2nd request of unaligned xfer
|
|
ACK_WAIT, -- waiting for ack from dcache
|
|
MMU_LOOKUP, -- waiting for MMU to look up translation
|
|
TLBIE_WAIT, -- waiting for MMU to finish doing a tlbie
|
|
FINISH_LFS, -- write back converted SP data for lfs*
|
|
COMPLETE -- extra cycle to complete an operation
|
|
);
|
|
|
|
type reg_stage_t is record
|
|
-- latch most of the input request
|
|
load : std_ulogic;
|
|
tlbie : std_ulogic;
|
|
dcbz : std_ulogic;
|
|
mfspr : std_ulogic;
|
|
addr : std_ulogic_vector(63 downto 0);
|
|
store_data : std_ulogic_vector(63 downto 0);
|
|
load_data : std_ulogic_vector(63 downto 0);
|
|
write_reg : gspr_index_t;
|
|
length : std_ulogic_vector(3 downto 0);
|
|
byte_reverse : std_ulogic;
|
|
sign_extend : std_ulogic;
|
|
update : std_ulogic;
|
|
update_reg : gpr_index_t;
|
|
xerc : xer_common_t;
|
|
reserve : std_ulogic;
|
|
atomic : std_ulogic;
|
|
atomic_last : std_ulogic;
|
|
rc : std_ulogic;
|
|
nc : std_ulogic; -- non-cacheable access
|
|
virt_mode : std_ulogic;
|
|
priv_mode : std_ulogic;
|
|
state : state_t;
|
|
dwords_done : std_ulogic;
|
|
last_dword : std_ulogic;
|
|
first_bytes : std_ulogic_vector(7 downto 0);
|
|
second_bytes : std_ulogic_vector(7 downto 0);
|
|
dar : std_ulogic_vector(63 downto 0);
|
|
dsisr : std_ulogic_vector(31 downto 0);
|
|
instr_fault : std_ulogic;
|
|
align_intr : std_ulogic;
|
|
sprval : std_ulogic_vector(63 downto 0);
|
|
busy : std_ulogic;
|
|
wait_dcache : std_ulogic;
|
|
wait_mmu : std_ulogic;
|
|
do_update : std_ulogic;
|
|
extra_cycle : std_ulogic;
|
|
mode_32bit : std_ulogic;
|
|
load_sp : std_ulogic;
|
|
ld_sp_data : std_ulogic_vector(31 downto 0);
|
|
ld_sp_nz : std_ulogic;
|
|
ld_sp_lz : std_ulogic_vector(5 downto 0);
|
|
st_sp_data : std_ulogic_vector(31 downto 0);
|
|
end record;
|
|
|
|
type byte_sel_t is array(0 to 7) of std_ulogic;
|
|
subtype byte_trim_t is std_ulogic_vector(1 downto 0);
|
|
type trim_ctl_t is array(0 to 7) of byte_trim_t;
|
|
|
|
signal r, rin : reg_stage_t;
|
|
signal lsu_sum : std_ulogic_vector(63 downto 0);
|
|
|
|
signal store_sp_data : std_ulogic_vector(31 downto 0);
|
|
signal load_dp_data : std_ulogic_vector(63 downto 0);
|
|
|
|
-- Generate byte enables from sizes
|
|
function length_to_sel(length : in std_logic_vector(3 downto 0)) return std_ulogic_vector is
|
|
begin
|
|
case length is
|
|
when "0001" =>
|
|
return "00000001";
|
|
when "0010" =>
|
|
return "00000011";
|
|
when "0100" =>
|
|
return "00001111";
|
|
when "1000" =>
|
|
return "11111111";
|
|
when others =>
|
|
return "00000000";
|
|
end case;
|
|
end function length_to_sel;
|
|
|
|
-- Calculate byte enables
|
|
-- This returns 16 bits, giving the select signals for two transfers,
|
|
-- to account for unaligned loads or stores
|
|
function xfer_data_sel(size : in std_logic_vector(3 downto 0);
|
|
address : in std_logic_vector(2 downto 0))
|
|
return std_ulogic_vector is
|
|
variable longsel : std_ulogic_vector(15 downto 0);
|
|
begin
|
|
longsel := "00000000" & length_to_sel(size);
|
|
return std_ulogic_vector(shift_left(unsigned(longsel),
|
|
to_integer(unsigned(address))));
|
|
end function xfer_data_sel;
|
|
|
|
-- 23-bit right shifter for DP -> SP float conversions
|
|
function shifter_23r(frac: std_ulogic_vector(22 downto 0); shift: unsigned(4 downto 0))
|
|
return std_ulogic_vector is
|
|
variable fs1 : std_ulogic_vector(22 downto 0);
|
|
variable fs2 : std_ulogic_vector(22 downto 0);
|
|
begin
|
|
case shift(1 downto 0) is
|
|
when "00" =>
|
|
fs1 := frac;
|
|
when "01" =>
|
|
fs1 := '0' & frac(22 downto 1);
|
|
when "10" =>
|
|
fs1 := "00" & frac(22 downto 2);
|
|
when others =>
|
|
fs1 := "000" & frac(22 downto 3);
|
|
end case;
|
|
case shift(4 downto 2) is
|
|
when "000" =>
|
|
fs2 := fs1;
|
|
when "001" =>
|
|
fs2 := x"0" & fs1(22 downto 4);
|
|
when "010" =>
|
|
fs2 := x"00" & fs1(22 downto 8);
|
|
when "011" =>
|
|
fs2 := x"000" & fs1(22 downto 12);
|
|
when "100" =>
|
|
fs2 := x"0000" & fs1(22 downto 16);
|
|
when others =>
|
|
fs2 := x"00000" & fs1(22 downto 20);
|
|
end case;
|
|
return fs2;
|
|
end;
|
|
|
|
-- 23-bit left shifter for SP -> DP float conversions
|
|
function shifter_23l(frac: std_ulogic_vector(22 downto 0); shift: unsigned(4 downto 0))
|
|
return std_ulogic_vector is
|
|
variable fs1 : std_ulogic_vector(22 downto 0);
|
|
variable fs2 : std_ulogic_vector(22 downto 0);
|
|
begin
|
|
case shift(1 downto 0) is
|
|
when "00" =>
|
|
fs1 := frac;
|
|
when "01" =>
|
|
fs1 := frac(21 downto 0) & '0';
|
|
when "10" =>
|
|
fs1 := frac(20 downto 0) & "00";
|
|
when others =>
|
|
fs1 := frac(19 downto 0) & "000";
|
|
end case;
|
|
case shift(4 downto 2) is
|
|
when "000" =>
|
|
fs2 := fs1;
|
|
when "001" =>
|
|
fs2 := fs1(18 downto 0) & x"0" ;
|
|
when "010" =>
|
|
fs2 := fs1(14 downto 0) & x"00";
|
|
when "011" =>
|
|
fs2 := fs1(10 downto 0) & x"000";
|
|
when "100" =>
|
|
fs2 := fs1(6 downto 0) & x"0000";
|
|
when others =>
|
|
fs2 := fs1(2 downto 0) & x"00000";
|
|
end case;
|
|
return fs2;
|
|
end;
|
|
|
|
begin
|
|
-- Calculate the address in the first cycle
|
|
lsu_sum <= std_ulogic_vector(unsigned(l_in.addr1) + unsigned(l_in.addr2)) when l_in.valid = '1' else (others => '0');
|
|
|
|
loadstore1_0: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if rst = '1' then
|
|
r.state <= IDLE;
|
|
r.busy <= '0';
|
|
r.do_update <= '0';
|
|
else
|
|
r <= rin;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
ls_fp_conv: if HAS_FPU generate
|
|
-- Convert DP data to SP for stfs
|
|
dp_to_sp: process(all)
|
|
variable exp : unsigned(10 downto 0);
|
|
variable frac : std_ulogic_vector(22 downto 0);
|
|
variable shift : unsigned(4 downto 0);
|
|
begin
|
|
store_sp_data(31) <= l_in.data(63);
|
|
store_sp_data(30 downto 0) <= (others => '0');
|
|
exp := unsigned(l_in.data(62 downto 52));
|
|
if exp > 896 then
|
|
store_sp_data(30) <= l_in.data(62);
|
|
store_sp_data(29 downto 0) <= l_in.data(58 downto 29);
|
|
elsif exp >= 874 then
|
|
-- denormalization required
|
|
frac := '1' & l_in.data(51 downto 30);
|
|
shift := 0 - exp(4 downto 0);
|
|
store_sp_data(22 downto 0) <= shifter_23r(frac, shift);
|
|
end if;
|
|
end process;
|
|
|
|
-- Convert SP data to DP for lfs
|
|
sp_to_dp: process(all)
|
|
variable exp : unsigned(7 downto 0);
|
|
variable exp_dp : unsigned(10 downto 0);
|
|
variable exp_nz : std_ulogic;
|
|
variable exp_ao : std_ulogic;
|
|
variable frac : std_ulogic_vector(22 downto 0);
|
|
variable frac_shift : unsigned(4 downto 0);
|
|
begin
|
|
frac := r.ld_sp_data(22 downto 0);
|
|
exp := unsigned(r.ld_sp_data(30 downto 23));
|
|
exp_nz := or (r.ld_sp_data(30 downto 23));
|
|
exp_ao := and (r.ld_sp_data(30 downto 23));
|
|
frac_shift := (others => '0');
|
|
if exp_ao = '1' then
|
|
exp_dp := to_unsigned(2047, 11); -- infinity or NaN
|
|
elsif exp_nz = '1' then
|
|
exp_dp := 896 + resize(exp, 11); -- finite normalized value
|
|
elsif r.ld_sp_nz = '0' then
|
|
exp_dp := to_unsigned(0, 11); -- zero
|
|
else
|
|
-- denormalized SP operand, need to normalize
|
|
exp_dp := 896 - resize(unsigned(r.ld_sp_lz), 11);
|
|
frac_shift := unsigned(r.ld_sp_lz(4 downto 0)) + 1;
|
|
end if;
|
|
load_dp_data(63) <= r.ld_sp_data(31);
|
|
load_dp_data(62 downto 52) <= std_ulogic_vector(exp_dp);
|
|
load_dp_data(51 downto 29) <= shifter_23l(frac, frac_shift);
|
|
load_dp_data(28 downto 0) <= (others => '0');
|
|
end process;
|
|
end generate;
|
|
|
|
loadstore1_1: process(all)
|
|
variable v : reg_stage_t;
|
|
variable brev_lenm1 : unsigned(2 downto 0);
|
|
variable byte_offset : unsigned(2 downto 0);
|
|
variable j : integer;
|
|
variable k : unsigned(2 downto 0);
|
|
variable kk : unsigned(3 downto 0);
|
|
variable long_sel : std_ulogic_vector(15 downto 0);
|
|
variable byte_sel : std_ulogic_vector(7 downto 0);
|
|
variable req : std_ulogic;
|
|
variable busy : std_ulogic;
|
|
variable addr : std_ulogic_vector(63 downto 0);
|
|
variable maddr : std_ulogic_vector(63 downto 0);
|
|
variable wdata : std_ulogic_vector(63 downto 0);
|
|
variable write_enable : std_ulogic;
|
|
variable do_update : std_ulogic;
|
|
variable done : std_ulogic;
|
|
variable data_permuted : std_ulogic_vector(63 downto 0);
|
|
variable data_trimmed : std_ulogic_vector(63 downto 0);
|
|
variable store_data : std_ulogic_vector(63 downto 0);
|
|
variable data_in : std_ulogic_vector(63 downto 0);
|
|
variable byte_rev : std_ulogic;
|
|
variable length : std_ulogic_vector(3 downto 0);
|
|
variable use_second : byte_sel_t;
|
|
variable trim_ctl : trim_ctl_t;
|
|
variable negative : std_ulogic;
|
|
variable sprn : std_ulogic_vector(9 downto 0);
|
|
variable exception : std_ulogic;
|
|
variable next_addr : std_ulogic_vector(63 downto 0);
|
|
variable mmureq : std_ulogic;
|
|
variable dsisr : std_ulogic_vector(31 downto 0);
|
|
variable mmu_mtspr : std_ulogic;
|
|
variable itlb_fault : std_ulogic;
|
|
variable misaligned : std_ulogic;
|
|
variable fp_reg_conv : std_ulogic;
|
|
variable lfs_done : std_ulogic;
|
|
begin
|
|
v := r;
|
|
req := '0';
|
|
v.mfspr := '0';
|
|
mmu_mtspr := '0';
|
|
itlb_fault := '0';
|
|
sprn := std_ulogic_vector(to_unsigned(decode_spr_num(l_in.insn), 10));
|
|
dsisr := (others => '0');
|
|
mmureq := '0';
|
|
fp_reg_conv := '0';
|
|
|
|
write_enable := '0';
|
|
lfs_done := '0';
|
|
|
|
do_update := r.do_update;
|
|
v.do_update := '0';
|
|
|
|
-- load data formatting
|
|
byte_offset := unsigned(r.addr(2 downto 0));
|
|
brev_lenm1 := "000";
|
|
if r.byte_reverse = '1' then
|
|
brev_lenm1 := unsigned(r.length(2 downto 0)) - 1;
|
|
end if;
|
|
|
|
-- shift and byte-reverse data bytes
|
|
for i in 0 to 7 loop
|
|
kk := ('0' & (to_unsigned(i, 3) xor brev_lenm1)) + ('0' & byte_offset);
|
|
use_second(i) := kk(3);
|
|
j := to_integer(kk(2 downto 0)) * 8;
|
|
data_permuted(i * 8 + 7 downto i * 8) := d_in.data(j + 7 downto j);
|
|
end loop;
|
|
|
|
-- Work out the sign bit for sign extension.
|
|
-- For unaligned loads crossing two dwords, the sign bit is in the
|
|
-- first dword for big-endian (byte_reverse = 1), or the second dword
|
|
-- for little-endian.
|
|
if r.dwords_done = '1' and r.byte_reverse = '1' then
|
|
negative := (r.length(3) and r.load_data(63)) or
|
|
(r.length(2) and r.load_data(31)) or
|
|
(r.length(1) and r.load_data(15)) or
|
|
(r.length(0) and r.load_data(7));
|
|
else
|
|
negative := (r.length(3) and data_permuted(63)) or
|
|
(r.length(2) and data_permuted(31)) or
|
|
(r.length(1) and data_permuted(15)) or
|
|
(r.length(0) and data_permuted(7));
|
|
end if;
|
|
|
|
-- trim and sign-extend
|
|
for i in 0 to 7 loop
|
|
if i < to_integer(unsigned(r.length)) then
|
|
if r.dwords_done = '1' then
|
|
trim_ctl(i) := '1' & not use_second(i);
|
|
else
|
|
trim_ctl(i) := "10";
|
|
end if;
|
|
else
|
|
trim_ctl(i) := '0' & (negative and r.sign_extend);
|
|
end if;
|
|
case trim_ctl(i) is
|
|
when "11" =>
|
|
data_trimmed(i * 8 + 7 downto i * 8) := r.load_data(i * 8 + 7 downto i * 8);
|
|
when "10" =>
|
|
data_trimmed(i * 8 + 7 downto i * 8) := data_permuted(i * 8 + 7 downto i * 8);
|
|
when "01" =>
|
|
data_trimmed(i * 8 + 7 downto i * 8) := x"FF";
|
|
when others =>
|
|
data_trimmed(i * 8 + 7 downto i * 8) := x"00";
|
|
end case;
|
|
end loop;
|
|
|
|
if HAS_FPU then
|
|
-- Single-precision FP conversion
|
|
v.st_sp_data := store_sp_data;
|
|
v.ld_sp_data := data_trimmed(31 downto 0);
|
|
v.ld_sp_nz := or (data_trimmed(22 downto 0));
|
|
v.ld_sp_lz := count_left_zeroes(data_trimmed(22 downto 0));
|
|
end if;
|
|
|
|
-- Byte reversing and rotating for stores.
|
|
-- Done in the first cycle (when l_in.valid = 1) for integer stores
|
|
-- and DP float stores, and in the second cycle for SP float stores.
|
|
store_data := r.store_data;
|
|
if l_in.valid = '1' or (HAS_FPU and r.state = FPR_CONV) then
|
|
if HAS_FPU and r.state = FPR_CONV then
|
|
data_in := x"00000000" & r.st_sp_data;
|
|
byte_offset := unsigned(r.addr(2 downto 0));
|
|
byte_rev := r.byte_reverse;
|
|
length := r.length;
|
|
else
|
|
data_in := l_in.data;
|
|
byte_offset := unsigned(lsu_sum(2 downto 0));
|
|
byte_rev := l_in.byte_reverse;
|
|
length := l_in.length;
|
|
end if;
|
|
brev_lenm1 := "000";
|
|
if byte_rev = '1' then
|
|
brev_lenm1 := unsigned(length(2 downto 0)) - 1;
|
|
end if;
|
|
for i in 0 to 7 loop
|
|
k := (to_unsigned(i, 3) - byte_offset) xor brev_lenm1;
|
|
j := to_integer(k) * 8;
|
|
store_data(i * 8 + 7 downto i * 8) := data_in(j + 7 downto j);
|
|
end loop;
|
|
end if;
|
|
v.store_data := store_data;
|
|
|
|
-- compute (addr + 8) & ~7 for the second doubleword when unaligned
|
|
next_addr := std_ulogic_vector(unsigned(r.addr(63 downto 3)) + 1) & "000";
|
|
|
|
-- Busy calculation.
|
|
-- We need to minimize the delay from clock to busy valid because it
|
|
-- gates the start of execution of the next instruction.
|
|
busy := r.busy and not ((r.wait_dcache and d_in.valid) or (r.wait_mmu and m_in.done));
|
|
v.busy := busy;
|
|
|
|
done := '0';
|
|
if r.state /= IDLE and busy = '0' then
|
|
done := '1';
|
|
end if;
|
|
exception := '0';
|
|
|
|
if r.dwords_done = '1' or r.state = SECOND_REQ then
|
|
addr := next_addr;
|
|
byte_sel := r.second_bytes;
|
|
else
|
|
addr := r.addr;
|
|
byte_sel := r.first_bytes;
|
|
end if;
|
|
if r.mode_32bit = '1' then
|
|
addr(63 downto 32) := (others => '0');
|
|
end if;
|
|
maddr := addr;
|
|
|
|
case r.state is
|
|
when IDLE =>
|
|
|
|
when FPR_CONV =>
|
|
req := '1';
|
|
if r.second_bytes /= "00000000" then
|
|
v.state := SECOND_REQ;
|
|
else
|
|
v.state := ACK_WAIT;
|
|
end if;
|
|
|
|
when SECOND_REQ =>
|
|
req := '1';
|
|
v.state := ACK_WAIT;
|
|
v.last_dword := '0';
|
|
|
|
when ACK_WAIT =>
|
|
if d_in.error = '1' then
|
|
-- dcache will discard the second request if it
|
|
-- gets an error on the 1st of two requests
|
|
if d_in.cache_paradox = '1' then
|
|
-- signal an interrupt straight away
|
|
exception := '1';
|
|
dsisr(63 - 38) := not r.load;
|
|
-- XXX there is no architected bit for this
|
|
dsisr(63 - 35) := d_in.cache_paradox;
|
|
else
|
|
-- Look up the translation for TLB miss
|
|
-- and also for permission error and RC error
|
|
-- in case the PTE has been updated.
|
|
mmureq := '1';
|
|
v.state := MMU_LOOKUP;
|
|
end if;
|
|
end if;
|
|
if d_in.valid = '1' then
|
|
if r.last_dword = '0' then
|
|
v.dwords_done := '1';
|
|
v.last_dword := '1';
|
|
if r.load = '1' then
|
|
v.load_data := data_permuted;
|
|
end if;
|
|
else
|
|
write_enable := r.load and not r.load_sp;
|
|
if HAS_FPU and r.load_sp = '1' then
|
|
-- SP to DP conversion takes a cycle
|
|
-- Write back rA update in this cycle if needed
|
|
do_update := r.update;
|
|
v.state := FINISH_LFS;
|
|
elsif r.extra_cycle = '1' then
|
|
-- loads with rA update need an extra cycle
|
|
v.state := COMPLETE;
|
|
v.do_update := r.update;
|
|
else
|
|
-- stores write back rA update in this cycle
|
|
do_update := r.update;
|
|
end if;
|
|
v.busy := '0';
|
|
end if;
|
|
end if;
|
|
-- r.wait_dcache gets set one cycle after we come into ACK_WAIT state,
|
|
-- which is OK because the dcache always takes at least two cycles.
|
|
v.wait_dcache := r.last_dword and not r.extra_cycle;
|
|
|
|
when MMU_LOOKUP =>
|
|
if m_in.done = '1' then
|
|
if r.instr_fault = '0' then
|
|
-- retry the request now that the MMU has installed a TLB entry
|
|
req := '1';
|
|
if r.last_dword = '0' then
|
|
v.state := SECOND_REQ;
|
|
else
|
|
v.state := ACK_WAIT;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
if m_in.err = '1' then
|
|
exception := '1';
|
|
dsisr(63 - 33) := m_in.invalid;
|
|
dsisr(63 - 36) := m_in.perm_error;
|
|
dsisr(63 - 38) := not r.load;
|
|
dsisr(63 - 44) := m_in.badtree;
|
|
dsisr(63 - 45) := m_in.rc_error;
|
|
end if;
|
|
|
|
when TLBIE_WAIT =>
|
|
|
|
when FINISH_LFS =>
|
|
lfs_done := '1';
|
|
|
|
when COMPLETE =>
|
|
exception := r.align_intr;
|
|
|
|
end case;
|
|
|
|
if done = '1' or exception = '1' then
|
|
v.state := IDLE;
|
|
v.busy := '0';
|
|
end if;
|
|
|
|
-- Note that l_in.valid is gated with busy inside execute1
|
|
if l_in.valid = '1' then
|
|
v.mode_32bit := l_in.mode_32bit;
|
|
v.load := '0';
|
|
v.dcbz := '0';
|
|
v.tlbie := '0';
|
|
v.instr_fault := '0';
|
|
v.align_intr := '0';
|
|
v.dwords_done := '0';
|
|
v.last_dword := '1';
|
|
v.write_reg := l_in.write_reg;
|
|
v.length := l_in.length;
|
|
v.byte_reverse := l_in.byte_reverse;
|
|
v.sign_extend := l_in.sign_extend;
|
|
v.update := l_in.update;
|
|
v.update_reg := l_in.update_reg;
|
|
v.xerc := l_in.xerc;
|
|
v.reserve := l_in.reserve;
|
|
v.rc := l_in.rc;
|
|
v.nc := l_in.ci;
|
|
v.virt_mode := l_in.virt_mode;
|
|
v.priv_mode := l_in.priv_mode;
|
|
v.load_sp := '0';
|
|
v.wait_dcache := '0';
|
|
v.wait_mmu := '0';
|
|
v.do_update := '0';
|
|
v.extra_cycle := '0';
|
|
|
|
addr := lsu_sum;
|
|
if l_in.second = '1' then
|
|
-- for the second half of a 16-byte transfer, use next_addr
|
|
addr := next_addr;
|
|
end if;
|
|
if l_in.mode_32bit = '1' then
|
|
addr(63 downto 32) := (others => '0');
|
|
end if;
|
|
v.addr := addr;
|
|
maddr := l_in.addr2; -- address from RB for tlbie
|
|
|
|
-- XXX Temporary hack. Mark the op as non-cachable if the address
|
|
-- is the form 0xc------- for a real-mode access.
|
|
if addr(31 downto 28) = "1100" and l_in.virt_mode = '0' then
|
|
v.nc := '1';
|
|
end if;
|
|
|
|
if l_in.second = '0' then
|
|
-- Do length_to_sel and work out if we are doing 2 dwords
|
|
long_sel := xfer_data_sel(l_in.length, lsu_sum(2 downto 0));
|
|
byte_sel := long_sel(7 downto 0);
|
|
v.first_bytes := byte_sel;
|
|
v.second_bytes := long_sel(15 downto 8);
|
|
else
|
|
byte_sel := r.first_bytes;
|
|
long_sel := r.second_bytes & r.first_bytes;
|
|
end if;
|
|
|
|
-- check alignment for larx/stcx
|
|
misaligned := or (std_ulogic_vector(unsigned(l_in.length(2 downto 0)) - 1) and addr(2 downto 0));
|
|
v.align_intr := l_in.reserve and misaligned;
|
|
if l_in.repeat = '1' and l_in.second = '0' and addr(3) = '1' then
|
|
-- length is really 16 not 8
|
|
-- Make misaligned lq cause an alignment interrupt in LE mode,
|
|
-- in order to avoid the case with RA = RT + 1 where the second half
|
|
-- faults but the first doesn't (and updates RT+1, destroying RA).
|
|
-- The equivalent BE case doesn't occur because RA = RT is illegal.
|
|
misaligned := '1';
|
|
if l_in.reserve = '1' or (l_in.op = OP_LOAD and l_in.byte_reverse = '0') then
|
|
v.align_intr := '1';
|
|
end if;
|
|
end if;
|
|
|
|
v.atomic := not misaligned;
|
|
v.atomic_last := not misaligned and (l_in.second or not l_in.repeat);
|
|
|
|
case l_in.op is
|
|
when OP_STORE =>
|
|
if HAS_FPU and l_in.is_32bit = '1' then
|
|
v.state := FPR_CONV;
|
|
fp_reg_conv := '1';
|
|
else
|
|
req := '1';
|
|
end if;
|
|
when OP_LOAD =>
|
|
req := '1';
|
|
v.load := '1';
|
|
-- Allow an extra cycle for RA update on loads
|
|
v.extra_cycle := l_in.update;
|
|
if HAS_FPU and l_in.is_32bit = '1' then
|
|
-- Allow an extra cycle for SP->DP precision conversion
|
|
v.load_sp := '1';
|
|
v.extra_cycle := '1';
|
|
end if;
|
|
when OP_DCBZ =>
|
|
v.align_intr := v.nc;
|
|
req := '1';
|
|
v.dcbz := '1';
|
|
when OP_TLBIE =>
|
|
mmureq := '1';
|
|
v.tlbie := '1';
|
|
v.state := TLBIE_WAIT;
|
|
v.wait_mmu := '1';
|
|
when OP_MFSPR =>
|
|
v.mfspr := '1';
|
|
-- partial decode on SPR number should be adequate given
|
|
-- the restricted set that get sent down this path
|
|
if sprn(9) = '0' and sprn(5) = '0' then
|
|
if sprn(0) = '0' then
|
|
v.sprval := x"00000000" & r.dsisr;
|
|
else
|
|
v.sprval := r.dar;
|
|
end if;
|
|
else
|
|
-- reading one of the SPRs in the MMU
|
|
v.sprval := m_in.sprval;
|
|
end if;
|
|
v.state := COMPLETE;
|
|
when OP_MTSPR =>
|
|
if sprn(9) = '0' and sprn(5) = '0' then
|
|
if sprn(0) = '0' then
|
|
v.dsisr := l_in.data(31 downto 0);
|
|
else
|
|
v.dar := l_in.data;
|
|
end if;
|
|
v.state := COMPLETE;
|
|
else
|
|
-- writing one of the SPRs in the MMU
|
|
mmu_mtspr := '1';
|
|
v.state := TLBIE_WAIT;
|
|
v.wait_mmu := '1';
|
|
end if;
|
|
when OP_FETCH_FAILED =>
|
|
-- send it to the MMU to do the radix walk
|
|
maddr := l_in.nia;
|
|
v.instr_fault := '1';
|
|
mmureq := '1';
|
|
v.state := MMU_LOOKUP;
|
|
v.wait_mmu := '1';
|
|
when others =>
|
|
assert false report "unknown op sent to loadstore1";
|
|
end case;
|
|
|
|
if req = '1' then
|
|
if v.align_intr = '1' then
|
|
v.state := COMPLETE;
|
|
elsif long_sel(15 downto 8) = "00000000" then
|
|
v.state := ACK_WAIT;
|
|
else
|
|
v.state := SECOND_REQ;
|
|
end if;
|
|
end if;
|
|
|
|
v.busy := req or mmureq or mmu_mtspr or fp_reg_conv;
|
|
end if;
|
|
|
|
-- Update outputs to dcache
|
|
d_out.valid <= req and not v.align_intr;
|
|
d_out.load <= v.load;
|
|
d_out.dcbz <= v.dcbz;
|
|
d_out.nc <= v.nc;
|
|
d_out.reserve <= v.reserve;
|
|
d_out.atomic <= v.atomic;
|
|
d_out.atomic_last <= v.atomic_last;
|
|
d_out.addr <= addr;
|
|
d_out.data <= store_data;
|
|
d_out.byte_sel <= byte_sel;
|
|
d_out.virt_mode <= v.virt_mode;
|
|
d_out.priv_mode <= v.priv_mode;
|
|
|
|
-- Update outputs to MMU
|
|
m_out.valid <= mmureq;
|
|
m_out.iside <= v.instr_fault;
|
|
m_out.load <= r.load;
|
|
m_out.priv <= r.priv_mode;
|
|
m_out.tlbie <= v.tlbie;
|
|
m_out.mtspr <= mmu_mtspr;
|
|
m_out.sprn <= sprn;
|
|
m_out.addr <= maddr;
|
|
m_out.slbia <= l_in.insn(7);
|
|
m_out.rs <= l_in.data;
|
|
|
|
-- Update outputs to writeback
|
|
-- Multiplex either cache data to the destination GPR or
|
|
-- the address for the rA update.
|
|
l_out.valid <= done;
|
|
if r.mfspr = '1' then
|
|
l_out.write_enable <= '1';
|
|
l_out.write_reg <= r.write_reg;
|
|
l_out.write_data <= r.sprval;
|
|
elsif do_update = '1' then
|
|
l_out.write_enable <= '1';
|
|
l_out.write_reg <= gpr_to_gspr(r.update_reg);
|
|
l_out.write_data <= r.addr;
|
|
elsif lfs_done = '1' then
|
|
l_out.write_enable <= '1';
|
|
l_out.write_reg <= r.write_reg;
|
|
l_out.write_data <= load_dp_data;
|
|
else
|
|
l_out.write_enable <= write_enable;
|
|
l_out.write_reg <= r.write_reg;
|
|
l_out.write_data <= data_trimmed;
|
|
end if;
|
|
l_out.xerc <= r.xerc;
|
|
l_out.rc <= r.rc and done;
|
|
l_out.store_done <= d_in.store_done;
|
|
|
|
-- update exception info back to execute1
|
|
e_out.busy <= busy;
|
|
e_out.exception <= exception;
|
|
e_out.alignment <= r.align_intr;
|
|
e_out.instr_fault <= r.instr_fault;
|
|
e_out.invalid <= m_in.invalid;
|
|
e_out.badtree <= m_in.badtree;
|
|
e_out.perm_error <= m_in.perm_error;
|
|
e_out.rc_error <= m_in.rc_error;
|
|
e_out.segment_fault <= m_in.segerr;
|
|
if exception = '1' and r.instr_fault = '0' then
|
|
v.dar := addr;
|
|
if m_in.segerr = '0' and r.align_intr = '0' then
|
|
v.dsisr := dsisr;
|
|
end if;
|
|
end if;
|
|
|
|
-- Update registers
|
|
rin <= v;
|
|
|
|
end process;
|
|
|
|
l1_log: if LOG_LENGTH > 0 generate
|
|
signal log_data : std_ulogic_vector(9 downto 0);
|
|
begin
|
|
ls1_log: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
log_data <= e_out.busy &
|
|
e_out.exception &
|
|
l_out.valid &
|
|
m_out.valid &
|
|
d_out.valid &
|
|
m_in.done &
|
|
r.dwords_done &
|
|
std_ulogic_vector(to_unsigned(state_t'pos(r.state), 3));
|
|
end if;
|
|
end process;
|
|
log_out <= log_data;
|
|
end generate;
|
|
|
|
end;
|