You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/openocd/xilinx-xc7.cfg

66 lines
1.3 KiB
INI

interface ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 0
ftdi_layout_init 0x00e8 0x60eb
reset_config none
adapter_khz 25000
source [find cpld/xilinx-xc7.cfg]
# From jtagspi.cfg with modification to support
# specifying file type
set _USER1 0x02
if { [info exists JTAGSPI_IR] } {
set _JTAGSPI_IR $JTAGSPI_IR
} else {
set _JTAGSPI_IR $_USER1
}
if { [info exists DR_LENGTH] } {
set _DR_LENGTH $DR_LENGTH
} else {
set _DR_LENGTH 1
}
if { [info exists TARGETNAME] } {
set _TARGETNAME $TARGETNAME
} else {
set _TARGETNAME $_CHIPNAME.proxy
}
if { [info exists FLASHNAME] } {
set _FLASHNAME $FLASHNAME
} else {
set _FLASHNAME $_CHIPNAME.spi
}
target create $_TARGETNAME testee -chain-position $_CHIPNAME.tap
flash bank $_FLASHNAME jtagspi 0 0 0 0 $_TARGETNAME $_JTAGSPI_IR $_DR_LENGTH
proc jtagspi_init {chain_id proxy_bit} {
# load proxy bitstream $proxy_bit and probe spi flash
global _FLASHNAME
pld load $chain_id $proxy_bit
reset halt
flash probe $_FLASHNAME
}
proc jtagspi_program {bin addr {type ""} } {
# write and verify binary file $bin at offset $addr
global _FLASHNAME
if { $type eq "" } {
flash write_image erase $bin $addr
flash verify_image $bin $addr
} else {
flash write_image erase $bin $addr $type
flash verify_image $bin $addr $type
}
}
# end jtagspi.cfg
proc fpga_program {} {
global _CHIPNAME
xc7_program $_CHIPNAME.tap
}