library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; library work; use work.common.all; use work.helpers.all; -- 2 cycle LSU -- We calculate the address in the first cycle entity loadstore1 is port ( clk : in std_ulogic; l_in : in Execute1ToLoadstore1Type; l_out : out Loadstore1ToDcacheType ); end loadstore1; architecture behave of loadstore1 is signal r, rin : Loadstore1ToDcacheType; signal lsu_sum : std_ulogic_vector(63 downto 0); begin -- Calculate the address in the first cycle lsu_sum <= std_ulogic_vector(unsigned(l_in.addr1) + unsigned(l_in.addr2)) when l_in.valid = '1' else (others => '0'); loadstore1_0: process(clk) begin if rising_edge(clk) then r <= rin; end if; end process; loadstore1_1: process(all) variable v : Loadstore1ToDcacheType; begin v := r; v.valid := l_in.valid; v.load := l_in.load; v.data := l_in.data; v.write_reg := l_in.write_reg; v.length := l_in.length; v.byte_reverse := l_in.byte_reverse; v.sign_extend := l_in.sign_extend; v.update := l_in.update; v.update_reg := l_in.update_reg; v.xerc := l_in.xerc; -- XXX Temporary hack. Mark the op as non-cachable if the address -- is the form 0xc------- -- -- This will have to be replaced by a combination of implementing the -- proper HV CI load/store instructions and having an MMU to get the I -- bit otherwise. if lsu_sum(31 downto 28) = "1100" then v.nc := '1'; else v.nc := '0'; end if; -- XXX Do length_to_sel here ? -- byte reverse stores in the first cycle if v.load = '0' and l_in.byte_reverse = '1' then v.data := byte_reverse(l_in.data, to_integer(unsigned(l_in.length))); end if; v.addr := lsu_sum; -- Update registers rin <= v; -- Update outputs l_out <= r; end process; end;