Commit Graph

8 Commits (4eae29801b823fde65df38576a90be0abb89e782)

Author SHA1 Message Date
Benjamin Herrenschmidt 7575b1e0c2 uart: Import and hook up opencore 16550 compatible UART
This imports via fusesoc a 16550 compatible (ie "standard") UART,
and wires it up optionally in the SoC instead of the potato one.

This also adds support for a second UART (which is always a
16550) to Arty, wired to JC "bottom" port.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 8366710217 liteeth: Hook up LiteX LiteEth ethernet controller
Currently only generated for Arty.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Joel Stanley 60e5f7b958 spi: Fix dat_i_l constraints
No cells matched 'get_cells -hierarchical -filter {NAME =~*/spi_rxtx/dat_i_l*}'. [build/microwatt_0/src/microwatt_0/fpga/arty_a7.xdc:42]

The signal is in it's own process so the net name ends up being
spi_rxtx/input_delay_1.dat_i_l_reg.

After this change the log shows:

Applied set_property IOB = TRUE for soc0/\spiflash_gen.spiflash /spi_rxtx/\input_delay_1.dat_i_l_reg . (constraint file  fpga/arty_a7.xdc, line 42).
Applied set_property IOB = TRUE for soc0/\spiflash_gen.spiflash /spi_rxtx/\input_delay_1.dat_i_l_reg . (constraint file  fpga/arty_a7.xdc, line 42).
Applied set_property IOB = TRUE for soc0/\spiflash_gen.spiflash /spi_rxtx/\input_delay_1.dat_i_l_reg . (constraint file  fpga/arty_a7.xdc, line 42).
Applied set_property IOB = TRUE for soc0/\spiflash_gen.spiflash /spi_rxtx/\input_delay_1.dat_i_l_reg . (constraint file  fpga/arty_a7.xdc, line 42).

Signed-off-by: Joel Stanley <joel@jms.id.au>
4 years ago
Benjamin Herrenschmidt cc4dcb3597 spi: Add SPI Flash controller
This adds an SPI flash controller which supports direct
memory-mapped access to the flash along with a manual
mode to send commands.

The direct mode can be set via generic to default to single
wire or quad mode. The controller supports normal, dual and quad
accesses with configurable commands, clock divider, dummy clocks
etc...

The SPI clock can be an even divider of sys_clk starting at 2
(so max 50Mhz with our typical Arty designs).

A flash offset is carried via generics to syscon to tell SW about
which portion of the flash is reserved for the FPGA bitfile. There
is currently no plumbing to make the CPU reset past that address (TBD).

Note: Operating at 50Mhz has proven unreliable without adding some
delay to the sampling of the input data. I'm working in improving
this, in the meantime, I'm leaving the default set at 25 Mhz.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 5ae5f76558 arty/nexys-video: Update XDC
The DRAM related pins have some small changes in LiteX, so resync
and add the false path information as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 3ac815823c fpga: Hookup Arty to litedram
The old toplevel.vhdl becomes top-generic.vhdl, which is to be used
by platforms that do not have a litedram option.

Arty has its own top-arty.vhdl which supports litedram and is now
hooked up

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Anton Blanchard 20674e0d65 Add SPI configuration to Xilinx constraint files
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Benjamin Herrenschmidt ab5c6ab9ac fpga: Arty A7's don't need multiple filesets
the XDC is identical between variants, so is the fileset

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago