microwatt/fpga/toplevel.vhd

-- The Potato Processor - SoC design for the Arty FPGA board
-- (c) Kristian Klomsten Skordal 2016 <kristian.skordal@wafflemail.net>

library ieee;
use ieee.std_logic_1164.all;

library work;
use work.wishbone_types.all;

-- 0x00000000: Main memory (1 MB)
-- 0xc0002000: UART0 (for host communication)
entity toplevel is
	port(
		clk       : in  std_logic;
		reset_n   : in  std_logic;
		
		-- UART0 signals:
		uart0_txd : out std_logic;
		uart0_rxd : in  std_logic
	);
end entity toplevel;

architecture behaviour of toplevel is

	-- Reset signals:
	signal reset : std_logic;

	-- Internal clock signals:
	signal system_clk : std_logic;
	signal timer_clk  : std_logic;
	signal system_clk_locked : std_logic;

	-- wishbone signals:
	signal wishbone_proc_out: wishbone_master_out;
	signal wishbone_proc_in: wishbone_slave_out;

	-- Processor signals:
	signal processor_adr_out : std_logic_vector(63 downto 0);
	signal processor_sel_out : std_logic_vector(7 downto 0);
	signal processor_cyc_out : std_logic;
	signal processor_stb_out : std_logic;
	signal processor_we_out  : std_logic;
	signal processor_dat_out : std_logic_vector(63 downto 0);
	signal processor_dat_in  : std_logic_vector(63 downto 0);
	signal processor_ack_in  : std_logic;
	
	-- UART0 signals:
	signal uart0_adr_in  : std_logic_vector(11 downto 0);
	signal uart0_dat_in  : std_logic_vector( 7 downto 0);
	signal uart0_dat_out : std_logic_vector( 7 downto 0);
	signal uart0_cyc_in  : std_logic;
	signal uart0_stb_in  : std_logic;
	signal uart0_we_in   : std_logic;
	signal uart0_ack_out : std_logic;

	-- Main memory signals:
	signal main_memory_adr_in  : std_logic_vector(19 downto 0);
	signal main_memory_dat_in  : std_logic_vector(63 downto 0);
	signal main_memory_dat_out : std_logic_vector(63 downto 0);
	signal main_memory_cyc_in  : std_logic;
	signal main_memory_stb_in  : std_logic;
	signal main_memory_sel_in  : std_logic_vector(7 downto 0);
	signal main_memory_we_in   : std_logic;
	signal main_memory_ack_out : std_logic;

	-- Selected peripheral on the interconnect:
	type intercon_peripheral_type is (
		PERIPHERAL_UART0, PERIPHERAL_MAIN_MEMORY, PERIPHERAL_ERROR,
		PERIPHERAL_NONE);
	signal intercon_peripheral : intercon_peripheral_type := PERIPHERAL_NONE;

	-- Interconnect address decoder state:
	signal intercon_busy : boolean := false;

	-- disable for now
	signal gpio_pins : std_logic_vector(11 downto 0);
	signal uart1_txd : std_logic;
	signal uart1_rxd : std_logic;
begin

	address_decoder: process(system_clk)
	begin
		if rising_edge(system_clk) then
			if reset = '1' then
				intercon_peripheral <= PERIPHERAL_NONE;
				intercon_busy <= false;
			else
				if not intercon_busy then
					if processor_cyc_out = '1' then
						intercon_busy <= true;

						if processor_adr_out(31 downto 24) = x"00" then -- Main memory space
							intercon_peripheral <= PERIPHERAL_MAIN_MEMORY;
						elsif processor_adr_out(31 downto 24) = x"c0" then -- Peripheral memory space
							case processor_adr_out(15 downto 12) is
								when x"2" =>
									intercon_peripheral <= PERIPHERAL_UART0;
								when others => -- Invalid address - delegated to the error peripheral
									intercon_peripheral <= PERIPHERAL_ERROR;
							end case;
						else
							intercon_peripheral <= PERIPHERAL_ERROR;
						end if;
					else
						intercon_peripheral <= PERIPHERAL_NONE;
					end if;
				else
					if processor_cyc_out = '0' then
						intercon_busy <= false;
						intercon_peripheral <= PERIPHERAL_NONE;
					end if;
				end if;
			end if;
		end if;
	end process address_decoder;

	processor_intercon: process(all)
	begin
		case intercon_peripheral is
			when PERIPHERAL_UART0 =>
				processor_ack_in <= uart0_ack_out;
				processor_dat_in <= x"00000000000000" & uart0_dat_out;
			when PERIPHERAL_MAIN_MEMORY =>
				processor_ack_in <= main_memory_ack_out;
				processor_dat_in <= main_memory_dat_out;
			when PERIPHERAL_NONE =>
				processor_ack_in <= '0';
				processor_dat_in <= (others => '0');
			when others =>
				processor_ack_in <= '0';
				processor_dat_in <= (others => '0');
		end case;
	end process processor_intercon;

	reset_controller: entity work.pp_soc_reset
		port map(
			clk => system_clk,
			reset_n => reset_n,
			reset_out => reset,
			system_clk => system_clk,
			system_clk_locked => system_clk_locked
		);

	clkgen: entity work.clock_generator
		port map(
			clk => clk,
			resetn => reset_n,
			system_clk => system_clk,
			locked => system_clk_locked
		);

	processor: entity work.core
		port map(
			clk => system_clk,
			rst => reset,

			wishbone_out => wishbone_proc_out,
			wishbone_in => wishbone_proc_in
	);
	processor_adr_out <= wishbone_proc_out.adr;
	processor_dat_out <= wishbone_proc_out.dat;
	processor_sel_out <= wishbone_proc_out.sel;
	processor_cyc_out <= wishbone_proc_out.cyc;
	processor_stb_out <= wishbone_proc_out.stb;
	processor_we_out <= wishbone_proc_out.we;
	wishbone_proc_in.dat <= processor_dat_in;
	wishbone_proc_in.ack <= processor_ack_in;

	uart0: entity work.pp_soc_uart
		generic map(
			FIFO_DEPTH => 32
		) port map(
			clk => system_clk,
			reset => reset,
			txd => uart0_txd,
			rxd => uart0_rxd,
			wb_adr_in => uart0_adr_in,
			wb_dat_in => uart0_dat_in,
			wb_dat_out => uart0_dat_out,
			wb_cyc_in => uart0_cyc_in,
			wb_stb_in => uart0_stb_in,
			wb_we_in => uart0_we_in,
			wb_ack_out => uart0_ack_out
		);
	uart0_adr_in <= processor_adr_out(uart0_adr_in'range);
	uart0_dat_in <= processor_dat_out(7 downto 0);
	uart0_we_in  <= processor_we_out;
	uart0_cyc_in <= processor_cyc_out when intercon_peripheral = PERIPHERAL_UART0 else '0';
	uart0_stb_in <= processor_stb_out when intercon_peripheral = PERIPHERAL_UART0 else '0';

	main_memory: entity work.pp_soc_memory
		generic map(
			MEMORY_SIZE => 1048576
		) port map(
			clk => system_clk,
			reset => reset,
			wb_adr_in => main_memory_adr_in,
			wb_dat_in => main_memory_dat_in,
			wb_dat_out => main_memory_dat_out,
			wb_cyc_in => main_memory_cyc_in,
			wb_stb_in => main_memory_stb_in,
			wb_sel_in => main_memory_sel_in,
			wb_we_in => main_memory_we_in,
			wb_ack_out => main_memory_ack_out
		);
	main_memory_adr_in <= processor_adr_out(main_memory_adr_in'range);
	main_memory_dat_in <= processor_dat_out;
	main_memory_we_in  <= processor_we_out;
	main_memory_sel_in <= processor_sel_out;
	main_memory_cyc_in <= processor_cyc_out when intercon_peripheral = PERIPHERAL_MAIN_MEMORY else '0';
	main_memory_stb_in <= processor_stb_out when intercon_peripheral = PERIPHERAL_MAIN_MEMORY else '0';
	
end architecture behaviour;