You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/register_file.vhdl

85 lines
2.8 KiB
VHDL

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.common.all;
entity register_file is
generic (
SIM : boolean := false
);
port(
clk : in std_logic;
d_in : in Decode2ToRegisterFileType;
d_out : out RegisterFileToDecode2Type;
w_in : in WritebackToRegisterFileType;
-- debug
sim_dump : in std_ulogic
);
end entity register_file;
architecture behaviour of register_file is
type regfile is array(0 to 32) of std_ulogic_vector(63 downto 0);
signal registers : regfile := (others => (others => '0'));
begin
-- synchronous writes
register_write_0: process(clk)
begin
if rising_edge(clk) then
if w_in.write_enable = '1' then
assert not(is_x(w_in.write_data)) and not(is_x(w_in.write_reg)) severity failure;
report "Writing GPR " & to_hstring(w_in.write_reg) & " " & to_hstring(w_in.write_data);
registers(to_integer(unsigned(w_in.write_reg))) <= w_in.write_data;
end if;
end if;
end process register_write_0;
-- asynchronous reads
register_read_0: process(all)
begin
if d_in.read1_enable = '1' then
report "Reading GPR " & to_hstring(d_in.read1_reg) & " " & to_hstring(registers(to_integer(unsigned(d_in.read1_reg))));
end if;
if d_in.read2_enable = '1' then
report "Reading GPR " & to_hstring(d_in.read2_reg) & " " & to_hstring(registers(to_integer(unsigned(d_in.read2_reg))));
end if;
if d_in.read3_enable = '1' then
report "Reading GPR " & to_hstring(d_in.read3_reg) & " " & to_hstring(registers(to_integer(unsigned(d_in.read3_reg))));
end if;
d_out.read1_data <= registers(to_integer(unsigned(d_in.read1_reg)));
d_out.read2_data <= registers(to_integer(unsigned(d_in.read2_reg)));
d_out.read3_data <= registers(to_integer(unsigned(d_in.read3_reg)));
-- Forward any written data
if w_in.write_enable = '1' then
if d_in.read1_reg = w_in.write_reg then
d_out.read1_data <= w_in.write_data;
end if;
if d_in.read2_reg = w_in.write_reg then
d_out.read2_data <= w_in.write_data;
end if;
if d_in.read3_reg = w_in.write_reg then
d_out.read3_data <= w_in.write_data;
end if;
end if;
end process register_read_0;
-- Dump registers if core terminates
sim_dump_test: if SIM generate
dump_registers: process(all)
begin
if sim_dump = '1' then
loop_0: for i in 0 to 31 loop
report "REG " & to_hstring(registers(i));
end loop loop_0;
assert false report "end of test" severity failure;
end if;
end process;
end generate;
end architecture behaviour;