a2o/dev/verilog/trilib/tri_lcbcntl_mac.v

84 lines
2.7 KiB
Verilog

// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
// *!****************************************************************
// *! FILENAME : tri_lcbcntl_mac.v
// *! DESCRIPTION : Used to generate control signals for LCBs
// *!****************************************************************
`include "tri_a2o.vh"
module tri_lcbcntl_mac(
vdd,
gnd,
sg,
nclk,
scan_in,
scan_diag_dc,
thold,
clkoff_dc_b,
delay_lclkr_dc,
act_dis_dc,
d_mode_dc,
mpw1_dc_b,
mpw2_dc_b,
scan_out
);
inout vdd;
inout gnd;
input sg;
input [0:`NCLK_WIDTH-1] nclk;
input scan_in;
input scan_diag_dc;
input thold;
output clkoff_dc_b;
output [0:4] delay_lclkr_dc;
output act_dis_dc;
output d_mode_dc;
output [0:4] mpw1_dc_b;
output mpw2_dc_b;
output scan_out;
// tri_lcbcntl_mac
(* analysis_not_referenced="true" *)
wire unused;
assign clkoff_dc_b = 1'b1;
assign delay_lclkr_dc = 5'b00000;
assign act_dis_dc = 1'b0;
assign d_mode_dc = 1'b0;
assign mpw1_dc_b = 5'b11111;
assign mpw2_dc_b = 1'b1;
assign scan_out = 1'b0;
assign unused = vdd | gnd | sg | (|nclk) | scan_in | scan_diag_dc | thold;
endmodule