cores
/
a2o
mirror of https://github.com/OpenPOWERFoundation/a2o
3
1
Fork 1
Code Issues Projects Releases Wiki Activity

convert clk2x arrays to clk1x

Browse Source
pull/18/head
openpowerwtf 3 years ago
parent 7fd72767b8
commit 5c201c0027
7 changed files with 8419 additions and 4 deletions
Show Stats Download Patch File Download Diff File

73
dev/verilog/readme.md
Unescape Escape View File

@ -0,0 +1,73 @@
# RTL


## fpga/sim arrays

* created sim-only (not fpga?) clk1x versions in trilib_clk1x to eliminate any possible problems with iverilog
and verilator dealing with multiple clocks

```
trilib/tri_144x78_2r4w.v
trilib/tri_64x72_1r1w.v
trilib/tri_cam_16x143_1r1w1c.v
trilib/tri_cam_32x143_1r1w1c.v
# these two should be checked with cycle counts, etc. vs originals - might not cause errors if wrong...
# at least one matches!
# BHT...test3: orig= [00014100] Passing IAR detected: 000007F0 new= [00014100] Passing IAR detected: 000007F0
# LRU won't be checked until doing TLB translates, and that logic will be rewritten for radix before that
trilib/tri_512x16_1r1w_1.v
trilib/tri_128x16_1r1w_1.v
```

### arrays using clk4x

* 4W was done with clk4x
* should be built for fpga with 4 arrays and a 'valid' array pointing to last write per entry

```
grep "nclk\[3\]" trilib/*
trilib/tri_144x78_2r4w.v: .WCLK(nclk[3]), // Port A write clock input : clk4x
trilib/tri_144x78_2r4w.v: .WCLK(nclk[3]), // Port A write clock input : clk4x
```

### arrays using clk2x

```
grep "nclk\[2\]" trilib/*
trilib/tri_128x16_1r1w_1.v: assign clk2x = nclk[2];
trilib/tri_128x16_1r1w_1.v: always @(posedge nclk[2])
trilib/tri_144x78_2r4w.v: assign wr_mux_ctrl = {nclk[0], nclk[2]};
trilib/tri_512x16_1r1w_1.v: assign clk2x = nclk[2];
trilib/tri_64x72_1r1w.v: assign clk2x = nclk[2];
trilib/tri_cam_16x143_1r1w1c.v: assign clk2x = nclk[2];
trilib/tri_cam_16x143_1r1w1c.v: always @(posedge nclk[2])
trilib/tri_cam_32x143_1r1w1c.v: assign clk2x = nclk[2];
trilib/tri_cam_32x143_1r1w1c.v: always @(posedge nclk[2])
```

* IERAT, DERAT (cams)

* BTB, SPR (1R,1W,read-before-write??)

```
grep tri_64x72 work/*
work/iuq_btb.v: tri_64x72_1r1w btb0(
work/xu_spr.v: tri_64x72_1r1w xu_spr_aspr(
```

* BHT (bitwrite)

```
grep tri_512x16_1r1w_1 trilib/*
trilib/tri_512x16_1r1w_1.v:module tri_512x16_1r1w_1(
trilib/tri_bht_1024x8_1r1w.v: tri_512x16_1r1w_1 bht0(
trilib/tri_bht_512x4_1r1w.v: tri_512x16_1r1w_1 bht0(
```

* MMU LRU (bitwrite)

```
grep tri_128x16_1r1w_1 work/*
work/mmq.v: //tri.tri_128x16_1r1w_1 #(.`EXPAND_TYPE(`EXPAND_TYPE)) lru_array0(
work/mmq.v: tri_128x16_1r1w_1 lru_array0(
```

281
dev/verilog/trilib_clk1x/tri_128x16_1r1w_1.v
Unescape Escape View File

@ -0,0 +1,281 @@
// © IBM Corp. 2022
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.

`timescale 1 ns / 1 ns

//*****************************************************************************
// Description: Tri Array Wrapper
//
//*****************************************************************************

// sim version, clk1x

`include "tri_a2o.vh"

module tri_128x16_1r1w_1(
vdd,
vcs,
gnd,
nclk,
rd_act,
wr_act,
lcb_d_mode_dc,
lcb_clkoff_dc_b,
lcb_mpw1_dc_b,
lcb_mpw2_dc_b,
lcb_delay_lclkr_dc,
ccflush_dc,
scan_dis_dc_b,
scan_diag_dc,
func_scan_in,
func_scan_out,
lcb_sg_0,
lcb_sl_thold_0_b,
lcb_time_sl_thold_0,
lcb_abst_sl_thold_0,
lcb_ary_nsl_thold_0,
lcb_repr_sl_thold_0,
time_scan_in,
time_scan_out,
abst_scan_in,
abst_scan_out,
repr_scan_in,
repr_scan_out,
abist_di,
abist_bw_odd,
abist_bw_even,
abist_wr_adr,
wr_abst_act,
abist_rd0_adr,
rd0_abst_act,
tc_lbist_ary_wrt_thru_dc,
abist_ena_1,
abist_g8t_rd0_comp_ena,
abist_raw_dc_b,
obs0_abist_cmp,
lcb_bolt_sl_thold_0,
pc_bo_enable_2,
pc_bo_reset,
pc_bo_unload,
pc_bo_repair,
pc_bo_shdata,
pc_bo_select,
bo_pc_failout,
bo_pc_diagloop,
tri_lcb_mpw1_dc_b,
tri_lcb_mpw2_dc_b,
tri_lcb_delay_lclkr_dc,
tri_lcb_clkoff_dc_b,
tri_lcb_act_dis_dc,
bw,
wr_adr,
rd_adr,
di,
dout
);
parameter addressable_ports = 128; // number of addressable register in this array
parameter addressbus_width = 7; // width of the bus to address all ports (2^addressbus_width >= addressable_ports)
parameter port_bitwidth = 16; // bitwidth of ports
parameter ways = 1; // number of ways

// POWER PINS
inout vdd;
inout vcs;
inout gnd;

input [0:`NCLK_WIDTH-1] nclk;

input rd_act;
input wr_act;

// DC TEST PINS
input lcb_d_mode_dc;
input lcb_clkoff_dc_b;
input [0:4] lcb_mpw1_dc_b;
input lcb_mpw2_dc_b;
input [0:4] lcb_delay_lclkr_dc;

input ccflush_dc;
input scan_dis_dc_b;
input scan_diag_dc;
input func_scan_in;
output func_scan_out;

input lcb_sg_0;
input lcb_sl_thold_0_b;
input lcb_time_sl_thold_0;
input lcb_abst_sl_thold_0;
input lcb_ary_nsl_thold_0;
input lcb_repr_sl_thold_0;
input time_scan_in;
output time_scan_out;
input abst_scan_in;
output abst_scan_out;
input repr_scan_in;
output repr_scan_out;

input [0:3] abist_di;
input abist_bw_odd;
input abist_bw_even;
input [0:6] abist_wr_adr;
input wr_abst_act;
input [0:6] abist_rd0_adr;
input rd0_abst_act;
input tc_lbist_ary_wrt_thru_dc;
input abist_ena_1;
input abist_g8t_rd0_comp_ena;
input abist_raw_dc_b;
input [0:3] obs0_abist_cmp;

// BOLT-ON
input lcb_bolt_sl_thold_0;
input pc_bo_enable_2; // general bolt-on enable
input pc_bo_reset; // reset
input pc_bo_unload; // unload sticky bits
input pc_bo_repair; // execute sticky bit decode
input pc_bo_shdata; // shift data for timing write and diag loop
input pc_bo_select; // select for mask and hier writes
output bo_pc_failout; // fail/no-fix reg
output bo_pc_diagloop;
input tri_lcb_mpw1_dc_b;
input tri_lcb_mpw2_dc_b;
input tri_lcb_delay_lclkr_dc;
input tri_lcb_clkoff_dc_b;
input tri_lcb_act_dis_dc;

input [0:15] bw;
input [0:6] wr_adr;
input [0:6] rd_adr;
input [0:15] di;

output [0:15] dout;

// tri_128x16_1r1w_1

// Configuration Statement for NCsim
//for all:ramb16_s36_s36 use entity unisim.RAMB16_S36_S36;

wire clk;
wire [0:8] b0addra;
wire [0:8] b0addrb;
wire wea;
wire web;
wire wren_a;
wire [0:15] w_data_in_0;
wire [0:15] r_data_out_0_bram;

// Latches
reg reset_q;
reg [0:15] r_data_out_1_q;


(* analysis_not_referenced="true" *)
wire unused;

// sim array
reg [0:15] mem[0:127];

integer i;
initial begin
for (i = 0; i < 128; i = i + 1)
mem[i] = 0;
end

//wtf:icarus $dumpvars cannot dump a vpiMemory
generate
genvar j;
for (j = 0; j < 128; j=j+1) begin: loc
wire [0:15] dat;
assign dat = mem[j][0:15];
end
endgenerate

assign clk = nclk[0];

always @(posedge clk)
begin: rlatch
reset_q <= nclk[1];
end

assign b0addra[2:8] = wr_adr;
assign b0addrb[2:8] = rd_adr;

// Unused Address Bits
assign b0addra[0:1] = 2'b00;
assign b0addrb[0:1] = 2'b00;

// port a is a read-modify-write port
assign wren_a = (bw != 0) & wr_act;
assign wea = wren_a;
assign web = 1'b0;
assign w_data_in_0[0] = bw[0] ? di[0] : r_data_out_0_bram[0];
assign w_data_in_0[1] = bw[1] ? di[1] : r_data_out_0_bram[1];
assign w_data_in_0[2] = bw[2] ? di[2] : r_data_out_0_bram[2];
assign w_data_in_0[3] = bw[3] ? di[3] : r_data_out_0_bram[3];
assign w_data_in_0[4] = bw[4] ? di[4] : r_data_out_0_bram[4];
assign w_data_in_0[5] = bw[5] ? di[5] : r_data_out_0_bram[5];
assign w_data_in_0[6] = bw[6] ? di[6] : r_data_out_0_bram[6];
assign w_data_in_0[7] = bw[7] ? di[7] : r_data_out_0_bram[7];
assign w_data_in_0[8] = bw[8] ? di[8] : r_data_out_0_bram[8];
assign w_data_in_0[9] = bw[9] ? di[9] : r_data_out_0_bram[9];
assign w_data_in_0[10] = bw[10] ? di[10] : r_data_out_0_bram[10];
assign w_data_in_0[11] = bw[11] ? di[11] : r_data_out_0_bram[11];
assign w_data_in_0[12] = bw[12] ? di[12] : r_data_out_0_bram[12];
assign w_data_in_0[13] = bw[13] ? di[13] : r_data_out_0_bram[13];
assign w_data_in_0[14] = bw[14] ? di[14] : r_data_out_0_bram[14];
assign w_data_in_0[15] = bw[15] ? di[15] : r_data_out_0_bram[15];

always @(posedge clk) begin

r_data_out_1_q <= mem[b0addrb];
if (wea) begin
mem[b0addra] <= w_data_in_0;
end

end

assign r_data_out_0_bram = mem[b0addra];
assign dout = r_data_out_1_q[0:15];

assign func_scan_out = func_scan_in;
assign time_scan_out = time_scan_in;
assign abst_scan_out = abst_scan_in;
assign repr_scan_out = repr_scan_in;

assign bo_pc_failout = 1'b0;
assign bo_pc_diagloop = 1'b0;

assign unused = |{vdd, vcs, gnd, nclk, lcb_d_mode_dc, lcb_clkoff_dc_b, lcb_mpw1_dc_b, lcb_mpw2_dc_b,
lcb_delay_lclkr_dc, ccflush_dc, scan_dis_dc_b, scan_diag_dc, lcb_sg_0, lcb_sl_thold_0_b,
lcb_time_sl_thold_0, lcb_abst_sl_thold_0, lcb_ary_nsl_thold_0, lcb_repr_sl_thold_0,
abist_di, abist_bw_odd, abist_bw_even, abist_wr_adr, wr_abst_act, abist_rd0_adr, rd0_abst_act,
tc_lbist_ary_wrt_thru_dc, abist_ena_1, abist_g8t_rd0_comp_ena, abist_raw_dc_b, obs0_abist_cmp,
lcb_bolt_sl_thold_0, pc_bo_enable_2, pc_bo_reset, pc_bo_unload, pc_bo_repair, pc_bo_shdata,
pc_bo_select, tri_lcb_mpw1_dc_b, tri_lcb_mpw2_dc_b, tri_lcb_delay_lclkr_dc, tri_lcb_clkoff_dc_b,
tri_lcb_act_dis_dc, rd_act};
endmodule

9
dev/verilog/trilib_clk1x/tri_144x78_2r4w.v
Unescape Escape View File

@ -1,6 +1,4 @@
//wtf rewrite as sim-only using only clk1x

// © IBM Corp. 2020
// © IBM Corp. 2022
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
@ -28,13 +26,15 @@
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.

`timescale 1 ps / 1 ps
`timescale 1 ns / 1 ns

//*****************************************************************************
// Description: Tri-Lam Array Wrapper
//
//*****************************************************************************

// sim version, clk1x

`include "tri_a2o.vh"

module tri_144x78_2r4w(
@ -87,6 +87,7 @@ module tri_144x78_2r4w(
);

wire unused;

// sim array
reg [64-`GPR_WIDTH:77] mem[0:143];


273
dev/verilog/trilib_clk1x/tri_512x16_1r1w_1.v
Unescape Escape View File

@ -0,0 +1,273 @@
// © IBM Corp. 2022
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.

`timescale 1 ns / 1 ns

//*****************************************************************************
// Description: Tri Array Wrapper
//
//*****************************************************************************

// sim version, clk1x

`include "tri_a2o.vh"

module tri_512x16_1r1w_1(
vdd,
vcs,
gnd,
nclk,
rd_act,
wr_act,
lcb_d_mode_dc,
lcb_clkoff_dc_b,
lcb_mpw1_dc_b,
lcb_mpw2_dc_b,
lcb_delay_lclkr_dc,
ccflush_dc,
scan_dis_dc_b,
scan_diag_dc,
func_scan_in,
func_scan_out,
lcb_sg_0,
lcb_sl_thold_0_b,
lcb_time_sl_thold_0,
lcb_abst_sl_thold_0,
lcb_ary_nsl_thold_0,
lcb_repr_sl_thold_0,
time_scan_in,
time_scan_out,
abst_scan_in,
abst_scan_out,
repr_scan_in,
repr_scan_out,
abist_di,
abist_bw_odd,
abist_bw_even,
abist_wr_adr,
wr_abst_act,
abist_rd0_adr,
rd0_abst_act,
tc_lbist_ary_wrt_thru_dc,
abist_ena_1,
abist_g8t_rd0_comp_ena,
abist_raw_dc_b,
obs0_abist_cmp,
lcb_bolt_sl_thold_0,
pc_bo_enable_2,
pc_bo_reset,
pc_bo_unload,
pc_bo_repair,
pc_bo_shdata,
pc_bo_select,
bo_pc_failout,
bo_pc_diagloop,
tri_lcb_mpw1_dc_b,
tri_lcb_mpw2_dc_b,
tri_lcb_delay_lclkr_dc,
tri_lcb_clkoff_dc_b,
tri_lcb_act_dis_dc,
bw,
wr_adr,
rd_adr,
di,
dout
);
parameter addressable_ports = 128; // number of addressable register in this array
parameter addressbus_width = 9; // width of the bus to address all ports (2^addressbus_width >= addressable_ports)
parameter port_bitwidth = 16; // bitwidth of ports
parameter ways = 1; // number of ways

// POWER PINS
inout vdd;
inout vcs;
inout gnd;

input [0:`NCLK_WIDTH-1] nclk;

input rd_act;
input wr_act;

// DC TEST PINS
input lcb_d_mode_dc;
input lcb_clkoff_dc_b;
input [0:4] lcb_mpw1_dc_b;
input lcb_mpw2_dc_b;
input [0:4] lcb_delay_lclkr_dc;

input ccflush_dc;
input scan_dis_dc_b;
input scan_diag_dc;
input func_scan_in;
output func_scan_out;

input lcb_sg_0;
input lcb_sl_thold_0_b;
input lcb_time_sl_thold_0;
input lcb_abst_sl_thold_0;
input lcb_ary_nsl_thold_0;
input lcb_repr_sl_thold_0;
input time_scan_in;
output time_scan_out;
input abst_scan_in;
output abst_scan_out;
input repr_scan_in;
output repr_scan_out;

input [0:3] abist_di;
input abist_bw_odd;
input abist_bw_even;
input [0:6] abist_wr_adr;
input wr_abst_act;
input [0:6] abist_rd0_adr;
input rd0_abst_act;
input tc_lbist_ary_wrt_thru_dc;
input abist_ena_1;
input abist_g8t_rd0_comp_ena;
input abist_raw_dc_b;
input [0:3] obs0_abist_cmp;

// BOLT-ON
input lcb_bolt_sl_thold_0;
input pc_bo_enable_2; // general bolt-on enable
input pc_bo_reset; // reset
input pc_bo_unload; // unload sticky bits
input pc_bo_repair; // execute sticky bit decode
input pc_bo_shdata; // shift data for timing write and diag loop
input pc_bo_select; // select for mask and hier writes
output bo_pc_failout; // fail/no-fix reg
output bo_pc_diagloop;
input tri_lcb_mpw1_dc_b;
input tri_lcb_mpw2_dc_b;
input tri_lcb_delay_lclkr_dc;
input tri_lcb_clkoff_dc_b;
input tri_lcb_act_dis_dc;

input [0:15] bw;
input [0:8] wr_adr;
input [0:8] rd_adr;
input [0:15] di;

output [0:15] dout;

wire clk;
wire [0:8] b0addra;
wire [0:8] b0addrb;
wire wea;
wire web;
wire wren_a;
wire [0:15] w_data_in_0;
wire [0:15] r_data_out_0_bram;

// Latches
reg reset_q;
reg [0:15] r_data_out_1_q;


(* analysis_not_referenced="true" *)
wire unused;

// sim array
reg [0:15] mem[0:511];

integer i;
initial begin
for (i = 0; i < 512; i = i + 1)
mem[i] = 0;
end

//wtf:icarus $dumpvars cannot dump a vpiMemory
generate
genvar j;
for (j = 0; j < 512; j=j+1) begin: loc
wire [0:15] dat;
assign dat = mem[j][0:15];
end
endgenerate

assign clk = nclk[0];

always @(posedge clk)
begin: rlatch
reset_q <= nclk[1];
end

//wtf do they use diff addresses?
assign b0addra[0:8] = wr_adr;
assign b0addrb[0:8] = rd_adr;

// port a is a read-modify-write port
assign wren_a = (bw != 0) & wr_act;
assign wea = wren_a;
assign web = 1'b0;
assign w_data_in_0[0] = bw[0] ? di[0] : r_data_out_0_bram[0];
assign w_data_in_0[1] = bw[1] ? di[1] : r_data_out_0_bram[1];
assign w_data_in_0[2] = bw[2] ? di[2] : r_data_out_0_bram[2];
assign w_data_in_0[3] = bw[3] ? di[3] : r_data_out_0_bram[3];
assign w_data_in_0[4] = bw[4] ? di[4] : r_data_out_0_bram[4];
assign w_data_in_0[5] = bw[5] ? di[5] : r_data_out_0_bram[5];
assign w_data_in_0[6] = bw[6] ? di[6] : r_data_out_0_bram[6];
assign w_data_in_0[7] = bw[7] ? di[7] : r_data_out_0_bram[7];
assign w_data_in_0[8] = bw[8] ? di[8] : r_data_out_0_bram[8];
assign w_data_in_0[9] = bw[9] ? di[9] : r_data_out_0_bram[9];
assign w_data_in_0[10] = bw[10] ? di[10] : r_data_out_0_bram[10];
assign w_data_in_0[11] = bw[11] ? di[11] : r_data_out_0_bram[11];
assign w_data_in_0[12] = bw[12] ? di[12] : r_data_out_0_bram[12];
assign w_data_in_0[13] = bw[13] ? di[13] : r_data_out_0_bram[13];
assign w_data_in_0[14] = bw[14] ? di[14] : r_data_out_0_bram[14];
assign w_data_in_0[15] = bw[15] ? di[15] : r_data_out_0_bram[15];

always @(posedge clk) begin

r_data_out_1_q <= mem[b0addrb];
if (wea) begin
mem[b0addra] <= w_data_in_0;
end

end

assign r_data_out_0_bram = mem[b0addra];
assign dout = r_data_out_1_q[0:15];

assign func_scan_out = func_scan_in;
assign time_scan_out = time_scan_in;
assign abst_scan_out = abst_scan_in;
assign repr_scan_out = repr_scan_in;

assign bo_pc_failout = 1'b0;
assign bo_pc_diagloop = 1'b0;

assign unused = |{vdd, vcs, gnd, nclk, lcb_d_mode_dc, lcb_clkoff_dc_b, lcb_mpw1_dc_b, lcb_mpw2_dc_b,
lcb_delay_lclkr_dc, ccflush_dc, scan_dis_dc_b, scan_diag_dc, lcb_sg_0, lcb_sl_thold_0_b,
lcb_time_sl_thold_0, lcb_abst_sl_thold_0, lcb_ary_nsl_thold_0, lcb_repr_sl_thold_0,
abist_di, abist_bw_odd, abist_bw_even, abist_wr_adr, wr_abst_act, abist_rd0_adr, rd0_abst_act,
tc_lbist_ary_wrt_thru_dc, abist_ena_1, abist_g8t_rd0_comp_ena, abist_raw_dc_b, obs0_abist_cmp,
lcb_bolt_sl_thold_0, pc_bo_enable_2, pc_bo_reset, pc_bo_unload, pc_bo_repair, pc_bo_shdata,
pc_bo_select, tri_lcb_mpw1_dc_b, tri_lcb_mpw2_dc_b, tri_lcb_delay_lclkr_dc, tri_lcb_clkoff_dc_b,
tri_lcb_act_dis_dc, rd_act};
endmodule

245
dev/verilog/trilib_clk1x/tri_64x72_1r1w.v
Unescape Escape View File

@ -0,0 +1,245 @@
// © IBM Corp. 2022
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.

`timescale 1 ns / 1 ns

//*****************************************************************************
// Description: Tri-Lam Array Wrapper
//
//*****************************************************************************

// sim version, clk1x

`include "tri_a2o.vh"

module tri_64x72_1r1w(
vdd,
vcs,
gnd,
nclk,
sg_0,
abst_sl_thold_0,
ary_nsl_thold_0,
time_sl_thold_0,
repr_sl_thold_0,
rd0_act,
rd0_adr,
do0,
wr_act,
wr_adr,
di,
abst_scan_in,
abst_scan_out,
time_scan_in,
time_scan_out,
repr_scan_in,
repr_scan_out,
scan_dis_dc_b,
scan_diag_dc,
ccflush_dc,
clkoff_dc_b,
d_mode_dc,
mpw1_dc_b,
mpw2_dc_b,
delay_lclkr_dc,
lcb_bolt_sl_thold_0,
pc_bo_enable_2,
pc_bo_reset,
pc_bo_unload,
pc_bo_repair,
pc_bo_shdata,
pc_bo_select,
bo_pc_failout,
bo_pc_diagloop,
tri_lcb_mpw1_dc_b,
tri_lcb_mpw2_dc_b,
tri_lcb_delay_lclkr_dc,
tri_lcb_clkoff_dc_b,
tri_lcb_act_dis_dc,
abist_di,
abist_bw_odd,
abist_bw_even,
abist_wr_adr,
wr_abst_act,
abist_rd0_adr,
rd0_abst_act,
tc_lbist_ary_wrt_thru_dc,
abist_ena_1,
abist_g8t_rd0_comp_ena,
abist_raw_dc_b,
obs0_abist_cmp
);

// Power
(* analysis_not_referenced="true" *)
inout vdd;
(* analysis_not_referenced="true" *)
inout vcs;
(* analysis_not_referenced="true" *)
inout gnd;

// Clock Pervasive
input [0:`NCLK_WIDTH-1] nclk;
input sg_0;
input abst_sl_thold_0;
input ary_nsl_thold_0;
input time_sl_thold_0;
input repr_sl_thold_0;

// Reads
input rd0_act;
input [0:5] rd0_adr;
output [64-`GPR_WIDTH:72-(64/`GPR_WIDTH)] do0;

// Writes
input wr_act;
input [0:5] wr_adr;
input [64-`GPR_WIDTH:72-(64/`GPR_WIDTH)] di;

// Scan
input abst_scan_in;
output abst_scan_out;
input time_scan_in;
output time_scan_out;
input repr_scan_in;
output repr_scan_out;

// Misc Pervasive
input scan_dis_dc_b;
input scan_diag_dc;
input ccflush_dc;
input clkoff_dc_b;
input d_mode_dc;
input [0:4] mpw1_dc_b;
input mpw2_dc_b;
input [0:4] delay_lclkr_dc;

// BOLT-ON
input lcb_bolt_sl_thold_0;
input pc_bo_enable_2; // general bolt-on enable
input pc_bo_reset; // reset
input pc_bo_unload; // unload sticky bits
input pc_bo_repair; // execute sticky bit decode
input pc_bo_shdata; // shift data for timing write and diag loop
input pc_bo_select; // select for mask and hier writes
output bo_pc_failout; // fail/no-fix reg
output bo_pc_diagloop;
input tri_lcb_mpw1_dc_b;
input tri_lcb_mpw2_dc_b;
input tri_lcb_delay_lclkr_dc;
input tri_lcb_clkoff_dc_b;
input tri_lcb_act_dis_dc;

// ABIST
input [0:3] abist_di;
input abist_bw_odd;
input abist_bw_even;
input [0:5] abist_wr_adr;
input wr_abst_act;
input [0:5] abist_rd0_adr;
input rd0_abst_act;
input tc_lbist_ary_wrt_thru_dc;
input abist_ena_1;
input abist_g8t_rd0_comp_ena;
input abist_raw_dc_b;
input [0:3] obs0_abist_cmp;

wire sreset;
wire [0:71] tidn;

(* analysis_not_referenced="true" *)
wire unused;

// sim array
reg [0:63] mem[0:71];

reg r0_e_q;
wire r0_e_d;
reg [0:5] r0_a_q;
wire [0:5] r0_a_d;
reg [0:71] r0_d_q;
wire [0:71] r0_d_d;

reg w0_e_q;
wire w0_e_d;
reg [0:5] w0_a_q;
wire [0:5] w0_a_d;
reg [0:71] w0_d_q;
wire [0:71] w0_d_d;

integer i;
initial begin
for (i = 0; i < 64; i = i + 1)
mem[i] = 0;
end

//wtf:icarus $dumpvars cannot dump a vpiMemory
generate
genvar j;
for (j = 0; j < 63; j=j+1) begin: loc
wire [0:63] dat;
wire [0:7] par;
assign dat = mem[j][0:63];
assign par = mem[j][0:7];
end
endgenerate

generate

assign clk = nclk[0];
assign sreset = nclk[1];

always @(posedge clk) begin

r0_e_q <= rd0_act;
r0_a_q <= rd0_adr;
r0_d_q <= r0_e_q ? mem[r0_a_q] : 0;

if (w0_e_q) begin
mem[w0_a_q] <= w0_d_q;
end
w0_e_q <= wr_act;
w0_a_q <= wr_adr;
w0_d_q <= di;

end

assign do0 = r0_d_q;

assign abst_scan_out = abst_scan_in;
assign time_scan_out = time_scan_in;
assign repr_scan_out = repr_scan_in;

assign bo_pc_failout = 1'b0;
assign bo_pc_diagloop = 1'b0;

assign unused = | ({nclk[3:`NCLK_WIDTH-1], sg_0, abst_sl_thold_0, ary_nsl_thold_0, time_sl_thold_0, repr_sl_thold_0, scan_dis_dc_b, scan_diag_dc, ccflush_dc, clkoff_dc_b, d_mode_dc, mpw1_dc_b, mpw2_dc_b, delay_lclkr_dc, abist_di, abist_bw_odd, abist_bw_even, abist_wr_adr, abist_rd0_adr, wr_abst_act, rd0_abst_act, tc_lbist_ary_wrt_thru_dc, abist_ena_1, abist_g8t_rd0_comp_ena, abist_raw_dc_b, obs0_abist_cmp, rd0_act, tidn, lcb_bolt_sl_thold_0, pc_bo_enable_2, pc_bo_reset, pc_bo_unload, pc_bo_repair, pc_bo_shdata, pc_bo_select, tri_lcb_mpw1_dc_b, tri_lcb_mpw2_dc_b, tri_lcb_delay_lclkr_dc, tri_lcb_clkoff_dc_b, tri_lcb_act_dis_dc});

endgenerate

endmodule

2695
dev/verilog/trilib_clk1x/tri_cam_16x143_1r1w1c.v
View File

File diff suppressed because it is too large Load Diff

4847
dev/verilog/trilib_clk1x/tri_cam_32x143_1r1w1c.v
View File

File diff suppressed because it is too large Load Diff
Write Preview
Loading…
Cancel
Save